Fenghua (Hong Kong) Electronics Ltd.

Chip resistors are available in different resistance values, tolerance levels, and power ratings to accommodate various circuit requirements. The resistance values can range from a few ohms to several megaohms, providing flexibility for different applications. The tolerance level indicates the acceptable deviation from the specified resistance value, ensuring accurate and consistent performance. Common sizes of chip resistors include: 0402: This size measures 0.04 inches by 0.02 inches (1.0mm by 0.5mm) and is commonly used in compact electronic devices and densely populated circuit boards. 0603: These resistors have dimensions of 0.06 inches by 0.03 inches (1.6mm by 0.8mm) and are widely used in consumer electronics, telecommunications, and automotive applications. 0805: With measurements of 0.08 inches by 0.05 inches (2.0mm by 1.25mm), 0805 resistors are popular for their versatility and ease of handling. They are commonly found in a wide range of electronic circuits. 1206: These resistors measure 0.12 inches by 0.06 inches (3.2mm by 1.6mm) and are often used in various electronic applications that require higher power handling capabilities. 1210: With dimensions of 0.12 inches by 0.10 inches (3.2mm by 2.5mm), 1210 resistors offer larger power ratings and are suitable for applications that require higher power dissipation. These sizes represent some of the most commonly used chip resistor dimensions. However, there are many other sizes available to meet specific circuit requirements. It is essential to select the appropriate chip resistor size based on factors such as power requirements, board space, and thermal considerations. 

Chip Resistor (AEC-Q200)

Chip Resistor AEC Q200 for various circuit requirements

Q-Nitto Hong Kong Limited

Model No. : CRCW080510K0FKEAHP. Material : N/A Purpose : Use for automotive and various fields Spec : RES,10K,1%,0.33W,0805;R,THICK FILM Product Width : 1.25mm Description : The Vishay CRCW-HP e3 series are pulse proof, high power thick film chip resistors. The CRCW-HP e3 series resistors have pure tin solder contacts on the Ni barrier layer that provides compatibility with the reflow soldering process.  Excellent pulse load capability Enhanced power rating Double side printed resistor element Protective overglaze AEC-Q200 qualified, rev. C compliant Available in ±0.5%, ±1% and ± 5% tolerance Zero ohm jumper are available for all sizes with very high current Power rating is double than the D/CRCW e3 series Superior ant surge and pulse characteristics compared to D/CRCW e3 series  Resistance :10kohm Power Rating :500mW Resistor Technology :Thick Film Product Range :CRCW-HP e3 Series Voltage Rating :150V Operating Temperature Max :155°C SVHC :No SVHC (27-Jun-2024) Resistance Tolerance :± 1% Resistor Case / Package :0805 [2012 Metric] Resistor Type :Pulse Proof, High Power Temperature Coefficient :± 100ppm/K Product Length :2mm Operating Temperature Min :-55°C Qualification :AEC-Q200 More details : please refer to catalogues  MOQ : 10pcs   

High power thick film chip resistors (CRCW080510K0FKEAHP.)

High power thick film chip resistors CRCW080510K0FKEAHP

Chip Resistors  Model No. : CRCW080510K0FKEAHP Spec : RES, THICK FILM, 10K, 1%, 0.33W, 0805; R Brand : VISHAY MOQ : 10pcs+ Other information : RoHs Lead Time : 15-30 day 

Chip Resistors (CRCW080510K0FKEAHP)

Guangdong South HongMing (HK) Electronic Science & Technology Co Ltd

Power NTC Thermistor has an excellent non-linearity characteristic for the resistance and temperature, its appliance is an easy and effective method to protect electronic device through surge current restrainning.

 Feature of Power Thermistor  	 Power NTC thermistors are in small size but with a high power that to restrain the
	Surge current. 	 Power NTC thermistors&nbsp; possess the electronic character of fast reflection, high reliability and long-life for use. 	 The material has a high constant as &ldquo;B value&rdquo; with small remained resistance. 	 Power NTC thermistors have a large application range integrate products&nbsp; series.   Rage of Application  	 Switch mode power supply,&nbsp; Adapter. 	 Transformer,&nbsp; LED driver circuit. 	 Electronic rectifier,&nbsp; electronic heater. 	 Electric&nbsp; motor. 	 It has a protected function for RT , display, lighting device and circuit of different electronic equipment.   Certificates  	 Safety Approval Certificate: UL / CUL 	 Quality management system Certificates: &nbsp;ISO9001:2008&nbsp; 	 ISO14001:2004   Electrical Characteristics  	 Rated Zero-Power ResistanceRN (&Omega;) : 5&plusmn;20% Ambient temp. Range:25℃&plusmn;2℃(TA).
	Testing voltage: 1.5VDC
	After placing for 1~2 hours under TA, the resistance value shall be measured. 	 Thermal Dissipation Constant &delta;(mW/℃) : &ge;15 , The thermal dissipation constant(&delta;) could be calculated by the ratio of a change in power dissipation(&Delta;P) of the thermistor to a change in temperature(&Delta;T) of the thermistor at a specified ambient temperature 	 Thermal Time Constant &tau;(s) : &le;68, The time(&tau; shall be measured within which the temperature change of NTC thermistor is reached at 63.2% of the ambient temperature change under zero power condition 	 Material Constant B : 2700&plusmn;10% B=T1T2/( T2- T1) &times;Ln (R1/R2), R1 , R2 is zero-power resistance at T1 , T2
	T1 = 298.15 K(25℃)&nbsp; T2 = 323.15 K(50℃) 	 Max.Steady State Current (A) : visible mechanical damage.
	&Delta;RN&nbsp;/ RN&nbsp;&le;20% (&Delta;R =∣RN-RN&#39;∣), 25℃&plusmn;2℃Ambient temp. Range, 5.0A&nbsp; Testing Current  

Power NTC  

Power NTC Thermistor for surge current protection

Power NTC thermistor has an excellent non-linearity chanracteristic for the resistance and temperature, its appliance is an easy and effective method to protect electronic device through surge current restraining.

DRM309D13ML837GA0

Power NTC thermistor for surge current protection

Chip Resistors   Model No. : CRCW08051M00FKEAHP Spec : RES, 1M, 1%, 0.5W, 0805, THICK FILM Brand : VISHAY MOQ : 10pcs+ Other information : RoHs Lead Time : 15-30 day 

Chip Resistors (CRCW08051M00FKEAHP)

DRM160D25MLEB0GA0

NTC thermistor for surge current protection

Power NTC Thermistor has an excellent non-linearity characteristic for the resistance and temperature, its appliance is an easy and effective method to protect electronic device through surge current restrainning.

 Feature of Power Thermistor  	 Power NTC thermistors are in small size but with a high power that to restrain the
	Surge current. 	 Power NTC thermistors&nbsp; possess the electronic character of fast reflection, high reliability and long-life for use. 	 The material has a high constant as &ldquo;B value&rdquo; with small remained resistance. 	 Power NTC thermistors have a large application range integrate products&nbsp; series.   Rage of Application  	 Switch mode power supply,&nbsp; Adapter. 	 Transformer,&nbsp; LED driver circuit. 	 Electronic rectifier,&nbsp; electronic heater. 	 Electric&nbsp; motor. 	 It has a protected function for RT , display, lighting device and circuit of different electronic equipment.   Certificates  	 Safety Approval Certificate: UL / CUL 	 Quality management system Certificates: &nbsp;ISO9001:2008&nbsp; 	 &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;ISO14001:2004   Electrical Characteristics  	 Rated Zero-Power ResistanceRN (&Omega;) : 5&plusmn;20% Ambient temp. Range:25℃&plusmn;2℃(TA).
	Testing voltage: 1.5VDC
	After placing for 1~2 hours under TA, the resistance value shall be measured. 	 Thermal Dissipation Constant &delta;(mW/℃) : &ge;15 , The thermal dissipation constant(&delta;) could be calculated by the ratio of a change in power dissipation(&Delta;P) of the thermistor to a change in temperature(&Delta;T) of the thermistor at a specified ambient temperature 	 Thermal Time Constant &tau;(s) : &le;68, The time(&tau; shall be measured within which the temperature change of NTC thermistor is reached at 63.2% of the ambient temperature change under zero power condition 	 Material Constant B : 2700&plusmn;10% B=T1T2/( T2- T1) &times;Ln (R1/R2), R1 , R2 is zero-power resistance at T1 , T2
	T1 = 298.15 K(25℃)&nbsp; T2 = 323.15 K(50℃) 	 Max.Steady State Current (A) : visible mechanical damage.
	&Delta;RN&nbsp;/ RN&nbsp;&le;20% (&Delta;R =∣RN-RN&#39;∣), 25℃&plusmn;2℃Ambient temp. Range, 5.0A&nbsp; Testing Current  

NTC  

Power NTC Thermistor has an excellent non-linearity characteristic for the resistance and temperature, its appliance is an easy and effective method to protect electronic device through surge current restraining.

 Feature of Power Thermistor  	 Power NTC thermistors are in small size but with a high power that to restrain the Surge current. 	 Power NTC thermistors possess the electronic character of fast reflection, high reliability and long-life for use. 	 The material has a high constant as &ldquo;B value&rdquo; with small remained resistance. 	 Power NTC thermistors have a large application range integrate products&nbsp; series.   Rage of Application  	 Switch mode power supply,&nbsp; Adapter. 	 Transformer, LED driver circuit. 	 Electronic rectifier, electronic heater. 	 Electric motor. 	 It has a protected function for RT, display, lighting device and circuit of different electronic equipment.   Certificates  	 Safety Approval Certificate: UL / CUL 	 Quality management system Certificates: &nbsp;ISO9001:2008&nbsp; 	 ISO14001:2004   Electrical Characteristics  	 Rated Zero-Power ResistanceRN (&Omega;) : 5&plusmn;20% Ambient temp. Range:25℃&plusmn;2℃(TA).
	Testing voltage: 1.5VDC
	After placing for 1~2 hours under TA, the resistance value shall be measured. 	 Thermal Dissipation Constant &delta;(mW/℃) : &ge;15, The thermal dissipation constant(&delta;) could be calculated by the ratio of a change in power dissipation(&Delta;P) of the thermistor to a change in temperature(&Delta;T) of the thermistor at a specified ambient temperature 	 Thermal Time Constant &tau;(s) : &le;68, The time(&tau; shall be measured within which the temperature change of NTC thermistor is reached at 63.2% of the ambient temperature change under zero power condition 	 Material Constant B : 2700&plusmn;10% B=T1T2/( T2- T1) &times;Ln (R1/R2), R1 , R2 is zero-power resistance at T1 , T2
	T1 = 298.15 K(25℃)&nbsp; T2 = 323.15 K(50℃) 	 Max.Steady State Current (A) : visible mechanical damage.
	&Delta;RN&nbsp;/ RN&nbsp;&le;20% (&Delta;R =∣RN-RN&#39;∣), 25℃&plusmn;2℃Ambient temp. Range, 5.0A&nbsp; Testing Current  

NTC 5D

NTC 5D power thermistor for surge current protection

Power NTC Thermistor has an excellent non-linearity characteristic for the resistance and temperature, its appliance is an easy and effective method to protect electronic device through surge current restraining.

 Feature of Power Thermistor  	 Power NTC thermistors are in small size but with a high power that to restrain the
	Surge current. 	 Power NTC thermistors possess the electronic character of fast reflection, high reliability and long-life for use. 	 The material has a high constant as &ldquo;B value&rdquo; with small remained resistance. 	 Power NTC thermistors have a large application range integrate products series.   Rage of Application  	 Switch mode power supply, Adapter. 	 Transformer, LED driver circuit. 	 Electronic rectifier, electronic heater. 	 Electric motor. 	 It has a protected function for RT, display, lighting device and circuit of different electronic equipment.   Certificates  	 Safety Approval Certificate: UL / CUL 	 Quality management system Certificates: ISO9001:2008&nbsp; 	 ISO14001:2004   Electrical Characteristics  	 Rated Zero-Power ResistanceRN (&Omega;): 5&plusmn;20% Ambient temp. Range: 25℃&plusmn;2℃(TA).
	Testing voltage: 1.5VDC
	After placing for 1~2 hours under TA, the resistance value shall be measured. 	 Thermal Dissipation Constant &delta;(mW/℃) : &ge;15 , The thermal dissipation constant(&delta;) could be calculated by the ratio of a change in power dissipation(&Delta;P) of the thermistor to a change in temperature(&Delta;T) of the thermistor at a specified ambient temperature 	 Thermal Time Constant &tau;(s) : &le;68, The time(&tau; shall be measured within which the temperature change of NTC thermistor is reached at 63.2% of the ambient temperature change under zero power condition 	 Material Constant B : 2700&plusmn;10% B=T1T2/( T2- T1) &times;Ln (R1/R2), R1 , R2 is zero-power resistance at T1 , T2
	T1 = 298.15 K(25℃)&nbsp; T2 = 323.15 K(50℃) 	 Max.Steady State Current (A): visible mechanical damage.
	&Delta;RN&nbsp;/ RN&nbsp;&le;20% (&Delta;R =∣RN-RN&#39;∣), 25℃&plusmn;2℃Ambient temp. Range, 5.0A Testing Current  

Focus Sensing and Control Technology Co.,LTD

Thermistor is a type of thermistor made by utilizing the significant change in resistance value of semiconductors with temperature. Its characteristic is that the resistivity changes significantly with temperature, and the general temperature measurement range is:- 50~+250 ℃.  

>Thermistors NTC/PTC/LPTC/PPTC

Thermistors NTC PTC LPTC PPTC for temperature measurement

NTC Thermistor 

NTC Thermistor for surge current protection and high reliability

Power NTC Thermistor has an excellent non-linearity characteristic for the resistance and temperature, its appliance is an easy and effective method to protect electronic device through surge current restraining.

 Feature of Power Thermistor  	 Power NTC thermistors are in small size but with a high power that to restrain the
	Surge current. 	 Power NTC thermistors possess the electronic character of fast reflection, high reliability and long-life for use. 	 The material has a high constant as &ldquo;B value&rdquo; with small remained resistance. 	 Power NTC thermistors have a large application range integrate products series.   Rage of Application  	 Switch mode power supply, Adapter. 	 Transformer, LED driver circuit. 	 Electronic rectifier, electronic heater. 	 Electric motor. 	 It has a protected function for RT, display, lighting device and circuit of different electronic equipment.   Certificates  	 Safety Approval Certificate: UL / CUL 	 Quality management system Certificates: ISO9001:2008&nbsp; 	 ISO14001:2004   Electrical Characteristics  	 Rated Zero-Power ResistanceRN (&Omega;): 5&plusmn;20% Ambient temp. Range: 25℃&plusmn;2℃(TA).
	Testing voltage: 1.5VDC
	After placing for 1~2 hours under TA, the resistance value shall be measured. 	 Thermal Dissipation Constant &delta;(mW/℃): &ge;15 , The thermal dissipation constant(&delta;) could be calculated by the ratio of a change in power dissipation(&Delta;P) of the thermistor to a change in temperature(&Delta;T) of the thermistor at a specified ambient temperature 	 Thermal Time Constant &tau;(s): &le;68, The time(&tau; shall be measured within which the temperature change of NTC thermistor is reached at 63.2% of the ambient temperature change under zero power condition 	 Material Constant B: 2700&plusmn;10% B=T1T2/( T2- T1) &times;Ln (R1/R2), R1, R2 is zero-power resistance at T1, T2
	T1 = 298.15 K(25℃)&nbsp; T2 = 323.15 K(50℃) 	 Max.Steady State Current (A): visible mechanical damage.
	&Delta;RN&nbsp;/ RN&nbsp;&le;20% (&Delta;R =∣RN-RN&#39;∣), 25℃&plusmn;2℃Ambient temp. Range, 5.0A&nbsp; Testing Current  

2.5D NTC Thermistor  

2 5D NTC Thermistor for surge current protection

Power NTC 22D-11  

Power NTC 22D 11 thermistor for surge current protection

Power NTC Thermistor has an excellent non-linearity characteristic for the resistance and temperature, its appliance is an easy and effective method to protect electronic device through surge current restraining.

 Feature of Power Thermistor  	 Power NTC thermistors are in small size but with a high power that to restrain the Surge current. 	 Power NTC thermistors&nbsp; possess the electronic character of fast reflection, high reliability and long-life for use. 	 The material has a high constant as &ldquo;B value&rdquo; with small remained resistance. 	 Power NTC thermistors have a large application range integrate products&nbsp; series.   Rage of Application  	 Switch mode power supply, Adapter. 	 Transformer, LED driver circuit. 	 Electronic rectifier, electronic heater. 	 Electric motor. 	 It has a protected function for RT, display, lighting device and circuit of different electronic equipment.   Certificates  	 Safety Approval Certificate: UL / CUL 	 Quality management system Certificates: &nbsp;ISO9001:2008&nbsp; 	 ISO14001:2004   Electrical Characteristics  	 Rated Zero-Power ResistanceRN (&Omega;) : 5&plusmn;20% Ambient temp. Range:25℃&plusmn;2℃(TA).
	Testing voltage: 1.5VDC
	After placing for 1~2 hours under TA, the resistance value shall be measured. 	 Thermal Dissipation Constant &delta;(mW/℃) : &ge;15 , The thermal dissipation constant(&delta;) could be calculated by the ratio of a change in power dissipation(&Delta;P) of the thermistor to a change in temperature(&Delta;T) of the thermistor at a specified ambient temperature 	 Thermal Time Constant &tau;(s) : &le;68, The time(&tau; shall be measured within which the temperature change of NTC thermistor is reached at 63.2% of the ambient temperature change under zero power condition 	 Material Constant B : 2700&plusmn;10% B=T1T2/( T2- T1) &times;Ln (R1/R2), R1 , R2 is zero-power resistance at T1 , T2
	T1 = 298.15 K(25℃)&nbsp; T2 = 323.15 K(50℃) 	 Max.Steady State Current (A) : visible mechanical damage.
	&Delta;RN&nbsp;/ RN&nbsp;&le;20% (&Delta;R =∣RN-RN&#39;∣), 25℃&plusmn;2℃Ambient temp. Range, 5.0A&nbsp; Testing Current  

Power NTC Thermistor

Thermistors 

NTC  2.5D-15

DRM809D09MJD35GA0

NTC  10D-11

DRM109D11MJDF5GAB

 	 Varistor is a sort of sensitive component which resistance value can vary with the applied voltage, it is widely used in the instantaneous overvoltage protection and surge absorption of Electronic-electrical equipment.      Recognized Certificate     	 VDE, UL, CQC      Features:     	 Great range of varistor voltage:  18V to 1.8KV  	 Fast response to transient voltage (ns) 	 High great withstanding surge current 	 Excellent non-linearity voltage 	 Symmetric V-I characteristics 	 No following-on current 	 Long life      Range of application:     	 Used in surge protection for IC, transistor, diode semiconductor switch circuit. 	 Used in communication, telemetering, electrical control and various electronic equipment. 	 Suppress the instantaneous overvoltage caused by electromagnetic valve and relay. 	 Suppress the instantaneous overvoltage caused by power supply. 	 Suppress the instantaneous overvoltage caused by electronic circuits 	 Lightning protection for various kind of electronic appliances.      Technical conditions:&nbsp;     	 Carry our standard of GB/T10193, GB/T10194, GB/T10195-1997 and SJ/T10348-10349. 	 Measurement conditions For varistors of 05D, 07D, 10D, 14D, 20D Series, voltage across the varistor measured under 1 m A DC. 	 Varistor voltage: The voltage between two terminals with the specified measuring current applied is expressed by letter V. 	 Maximum continuous operating voltage: The maximum sinusoidal RMS voltage or maximum Dc voltage that can be applied continuously in the specified environmental temperature range. 	 Working ambient temperature: -40C ~ +85C&nbsp; 	 Storage temperature range: -40C ~ +125C  

Varistor Taping Type

Varistor Taping Type for surge protection and voltage regulation

Shenzhen Socay Electronics Co., Ltd.

NTC Thermistor MF72 Series- 20Ω-5

Kingtronics International Company

 	 Operating Temperature Range: -40C~+105C 	 Body Diameters Range From 5D to 20D 	 Wide Operating Voltage from 18V to 1800V 	 Full compliance with RoHS and REACH  

My Sourcing

Unfollow this supplier?

Unfollow this supplier?