Shenzhen JetHome Technology Co.,Ltd.

The JXD-R6-E1ETH-LCD is an ESP32-based DIN-rail automation controller with Ethernet, Wi-Fi, and Bluetooth on board, and an LCD with navigation buttons for local control. It comes with 6 relays (10 A), 6 galvanically isolated dry-contact inputs, 1-Wire, a USB-UART console, and passive PoE for power over Ethernet. Compatible with PlatformIO, Arduino, and ESPHome - a ready-made platform for smart home and automation projects instead of a DIY board with external add-ons. Two expansion module slots let you extend the controller's capabilities as needed. 

JXD-R6-E1ETH-LCD

JXD R6 E1ETH LCD is an ESP32 based automation controller

Best Luck Industrial Development Ltd

8188-32 BARRIER POLE

Shantou Shengying Toys Plastic Co.,Ltd

The kids' kitchen is a charming and interactive play set that sparks the imagination of young children. It is crafted with high-quality, child-safe materials to ensure durability and safety during playtime. This miniature kitchen typically features a stove with adjustable burners, allowing kids to pretend to cook up a storm. The oven door can be opened and closed, adding to the realism. There is also a sink with a faucet that can be turned on and off, providing an opportunity for children to engage in pretend dishwashing. The countertops are spacious enough for food preparation and come with built-in storage areas for pots, pans, and utensils. The set includes a variety of colorful cookware, cutlery, and play food items. With its vibrant colors and detailed design, this kids' kitchen not only offers hours of fun but also helps in the development of creativity, role-playing skills, and an understanding of basic kitchen functions and food concepts. It is an ideal addition to any playroom or children's area, inspiring kids to explore the wonderful world of cooking and domestic play.  

008-32 kitchen

AEI Protect-On Systems Ltd

AP-01 is the Wi-Fi Module compatible with the App "Access Plus" to enhance the functions of the DK-2800 MK-II+ Keypad.AP-01 is the hardware module for internal installation for the keypad and the App "Access Plus" is the software of the module on mobile phone.AP-01 is suitable for plastic housing keypad and the Wi-Fi router is closed to the keypad.  Features: Operating Voltage:On-Board Voltage from the Keypad Operating Current:15mA - 180mA (Transmitting Data) Operation Temperature:-20 C to +85 C Environmental Humidity:20 - 80% relative humidity non-condensing Working Environment &amp; Ingress Protection:Indoor Use Only Wi-Fi Standard:IEEE802.11b/g/n Wi-Fi Range:45m Wi-Fi Type:2.4GHz 

WiFi Module

Leedarson IoT Technology Inc.

Use the ACK module，Voice Control by Amazon Alexa directly.ACK adds high-reliability/low-latency Alexa control, frustration free setup and securityDimmable from 5% to 100%.Preset static and dynamic scenes for different light experience (such as wake up and sunset).Combo protocol, easily connect these smart light bulbs to your Wi-Fi router directly.

Smart Bulb-Alexa Connect Kit Solution

KARSEN TECH LIMITED

Product Description2.13-Inch Black &amp; White E-Paper Display Module The 2.13-inch Black &amp; White E-Paper Display Module features a high-contrast, paper-like display that offers excellent readability under ambient light. With ultra-low power consumption, the display only requires power during image updates, making it ideal for battery-powered and energy-efficient applications. The module provides a wide viewing angle, supports partial and full refresh, and communicates via an SPI interface for easy integration with microcontrollers such as Arduino, STM32, ESP32, and Raspberry Pi. Features2.13-inch black &amp; white e-paper displayPaper-like viewing experience with no backlightUltra-low power consumptionHigh contrast and wide viewing angle (nearly 180°)Supports full and partial refreshSPI communication interfaceRetains the displayed image even when power is removedCompatible with Arduino, ESP32, STM32, Raspberry Pi, and other embedded platformsApplicationsElectronic shelf labels (ESL)Smart badges and ID cardsIndustrial instrumentsIoT devicesSmart home displaysPrice tagsWearable devicesPortable information displaysTypical SpecificationsDisplay Size: 2.13 inchesDisplay Color: Black &amp; WhiteDisplay Technology: E-Paper (E-Ink Compatible)Interface: SPIViewing Angle: Nearly 180°Power Consumption: Ultra-low (power required only during refresh)Operating Voltage: 3.3VRefresh Mode: Full Refresh / Partial Refresh

2.13 inch SPI black and white monochrome  e-ink e-paper display module

2 13 inch SPI black and white monochrome e ink display

Microtech Technology Co Ltd

128*32 COG dot matrix display AIP31567 FSTN monochrome LCD screen with LED backlight DISPLAY TYPE:DFSTN &amp; NEGATIVEBACK POLARIZER:TRANSMISSIVEVIEWING DIRECTION:6:00DRIVE METHOD:1/32 DUTY , 1/6BIASOPERATING VOLTAGE:VDD=3.3VOPERATING TEMP:-20℃ TO +70℃STORAGE TEMP:-30℃ TO +80℃CONNECTOR:COG/AIP31567BACKLIGHT COLOR:WHITE (LED 4 DIES)  

128*32 COG dot matrix display AIP31567 FSTN monochrome LCD screen with LED backlight

128 32 COG dot matrix display AIP31567 FSTN monochrome LCD screen

503-32 BABY EDUCATIONAL MATCHING BLUE

Dongguan yuyuan Intelligent Technology CO.,Ltd

4.3inch wifi smart door viewer （S32）

Okystar Technology Co Ltd

Overview： In this tutorial we will connect a MAX7219 and scroll the text across. Since these modules use the MAX7219 LED driver chip, we will be able to turn on and off the 64 LEDs of each module, using only 3 pins on our UNO. Component Required: 1 x Uno R3 1 x Dot matrix light 16 x F-M wires (Female to Male DuPont wires) 1 x RC522 RFID module 7 x F-M wires (Female to Male DuPont wires) 

CH340G RFID Learning Kits for Arduino

Xiaowei Technology (Zhuhai) Co., Ltd

The ZigBee 3.0 Smart Gateway is a powerful IoT hub designed to connect and manage ZigBee smart devices through both 2.4GHz Wi-Fi and 10/100M Ethernet connections. Serving as the central controller of a smart home system, it enables seamless communication between ZigBee sensors, switches, lighting, security devices, and mobile applications, delivering a stable, reliable, and intelligent home automation experience. Supporting the ZigBee 3.0 protocol, the gateway provides excellent compatibility with a wide range of ZigBee devices and allows up to 128 sub-devices to be connected simultaneously, making it suitable for residential, commercial, hotel, office, and smart building applications. Users can choose either Wi-Fi or wired Ethernet networking according to different installation environments. The Ethernet connection offers enhanced stability, lower latency, and stronger anti-interference performance, making it ideal for projects requiring continuous and reliable communication. The gateway supports Bluetooth (BLE) provisioning for quick and easy network configuration, while remote OTA firmware upgrades ensure devices remain updated with the latest features and security improvements. Designed with an automatic recovery mechanism, the gateway performs a physical restart if abnormal operation is detected for more than three minutes, significantly improving long-term reliability and system stability. With its compact ABS housing and low power consumption, the gateway can be easily installed in homes, apartments, hotels, offices, retail stores, and smart community projects. It serves as the intelligent bridge connecting sensors, lighting, climate control, door locks, curtains, and other ZigBee-enabled devices into one unified smart ecosystem. Ideal for smart home brands, IoT solution providers, system integrators, distributors, telecom operators, and OEM/ODM projects. Key FeaturesZigBee 3.0 smart home gatewaySupports both Wi-Fi and wired Ethernet networkingConnects up to 128 ZigBee devicesBLE quick network provisioningRemote OTA firmware upgradeStable wired communication with RJ45 Ethernet portReliable ZigBee mesh networkingAutomatic abnormal operation recoveryCompact, low-power industrial designWide compatibility with ZigBee smart devicesEasy installation and deploymentOEM &amp; ODM customization supported

ZigBee 3.0 Smart Gateway with Wi-Fi & Ethernet | Wireless IoT Hub Supporting Up to 128 ZigBee Devices

ZigBee 3.0 Smart Gateway with WiFi and Ethernet support

Shenzhen Anxinke Technology Co., Ltd.

 	 Package: SMD22 	 Size: 24 x 16 x 3 (&plusmn;0.2 mm） 	 SPI Flash: 32 Mbits 	 Antenna: PCB Antenna 	 CPU: ESP8266 80 / 160MHz / IRAM 64KB 	 IO Port: 9 (UART / GPIO / ADC / PWM) 	 Certification: FCC / IC / CE 	 Power Supply: Voltage 3.0V ~ 3.6V, Typical 3.3V, Current &gt; 500mA  

Ai-Thinker ESP-12F

Ai Thinker ESP 12F wifi module with ESP8266 CPU

Shenzhen Xuanhuo Tribe Technology Co.,Ltd

 	 2.4GHz Dual Mode WiFi + Bluetooth Development Board 	 Ultra-low power consumption, works perfectly with the Arduino IDE 	 Support LWIP protocol, Freertos 	 Support Three Modes: AP, STA, and AP+STA 	 ESP32 is a safe, reliable, and scalable to a variety of applications  

ESP32 Demoboard

ESP32 Demoboard with WiFi and Bluetooth capabilities

Guangzhou Gizwits IoT Technology Co.,Ltd.

This kind of Wi-Fi module is developed by Gizwits and his chipmaker partner. There are 2 types of this module, one is for normal product, another is suite for lighting products, which has a good heatproof. 	 More details: 	 Communication Method: Wi-Fi 	 Size: 24mm (W) * 16mm (H) 	 Chip: ES8266 	 Flash Memory: 1 M Byte 	 Firmware: Pre-compiled 	 Heatproof -40 to 125 degree Celsius  

Gizwits Wi-Fi Module

Gizwits Wi Fi Module with ES8266 chip and heatproof design

Espot Lighting Limited

5W/7W E27 Direct Replace motion sensing LED bulb
- Lighting Control Mode: Automatic light up at night; User control dim level
- Suitable For Elderly &amp; Children For Automatic Light
- Color Temperature: 3500K, 6000K
&nbsp;

ePSOT Smart Bulb

ePSOT Smart Bulb with motion sensing and automatic light control

 	 Comes with neutral APP + comes with super cloud service. (Module is built-in APP + cloud service) 	 Open up most mainstream smart audio in the market	 		 Amazon: Amazon Alexa 		 Google: Google Assistant 		 Ali: Tmall Elf 		 Jingdong: Jingdong 		 Xiaomi: Little love classmates 		 Baidu: Small intelligence 	 	 	 Support WiFi relay (WiFi signal amplifier) 	 Open the device manager and click DT-Light. 	 Turn on the wireless settings and turn on the Internet. 	 DT-Light second variable WIFI repeater (child router)  

DT-Light Development Board

DT Light Development Board with WiFi relay and amplifier

Hongkong Excel Ind'l Co Ltd

This is an ESP air purifier. The basic version comes with 3 stages of air purifying processes. The AC air purifier is suitable for homes and offices and improves the indoor air quality. 	 Electrostatic precipitator (ESP) that captures airborne pollutants 	 UVC germicidal lamp kills harmful airborne bacteria and virus 	 Active carbon filter eliminates odors 	 Negative ion generator for refreshing the air (optional) 	 Power consumption: 8W  

ESP Air Purifier

ESP Air Purifier with advanced air purification features

ESP8266 ESP-01S Serial Wifi Wireless Module Compatible with Arduino 	 The ESP8266 microcontroller integrates a Tensilica L106 32-bit RISC processor, which is extra-low power consumption and reaches a maximum clock speed of 160 MHz.&nbsp; 	 80% of the processing power is available for the developers using.&nbsp; 	 And there&#39;s a lot of resources available for the ESP8266&#39;s development, and ESP-01S module is compatiable with Arduino.  Specification: 	 Package: DIP-8&nbsp; 	 Flash: 8Mbit 	 Dimension: 24.7*14.4*11.0mm 	 Serial/UART baud rate: 115200 	 Antenna: Onboard&nbsp; 	 Update Version of the ESP-01, totally compatible with ESP-01, while have a better performance and recommoned to replace the ESP-01 with ESP-01S  

WIFI Wireless Module Compatible with Arduino

Raytac Corp

Raytac&rsquo;s MDBT42 is a BT5 and BT4.2 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF52832 SoC solution, which incorporates: GPIO, SPI, UART, I2C, I2S, PWM and ADC interfaces for connecting peripherals and sensors.

About the module: 	 1. Dual Transmission mode of BLE &amp; 2.4Ghz RF upon customer preference. 	 2. Compact size with (L) 13.8 x (W) 8.8 x (H) 1.9 mm. 	 3. Low power requirements, ultra-low peak, average and idle mode power consumption. 	 4. Be compatible with a large installed base of mobile phones, tablets and computers. 	 5. Fully coverage of BLE software stack 	 6. BLE &amp; RF transmission switching helps products fit all operation system and most hardware. 	 7. BT5 &amp; BT4.2 Bluetooth Specificaiton Certified 	 8. FCC/IC/CE/Telec/KC/SRRC safety regulation certification granted.  Features 	 Multi-protocol 2.4GHz radio 	 32-bit ARM Cortex &ndash; M4F processor 	 512KB flash programmed memory and 64KB RAM 	 Software stacks available as downloads 	 Application development independent from protocol stack 	 On-air compatible with nRF51, nRF24AP and nRF24L series 	 Programmable output power from +4dBm to -20dBm 	 RSSI 	 RAM mapped FIFOs using EasyDMA 	 Dynamic on-air payload length up to 256 bytes 	 Flexible and configurable 32 pin GPIO 	 Programmable peripheral interface - PPI 	 Simple ON / OFF global power mode 	 Full set of digital interface all with Easy DMA including: 	 3 x Hardware SPI master ; 3 x Hardware SPI slave 	 2 x two-wire master ; 2 x two-wire slave 	 1 x UART (CTS / RTS) 	 PDM for digital microphone 	 I2S for audio 	 Quadrature demodulator 	 12-bit / 200KSPS ADC 	 128-bit AES ECB / CCM / AAR co-processor 	 Lowe cost external crystal 32MHz &plusmn; 40ppm for Bluetooth ; &plusmn; 50ppm for ANT Plus 	 Lowe power 32MHz crystal and RC oscillators 	 Wide supply voltage range 1.7V to 3.6V 	 On-chip DC/DC buck converter 	 Individual power management for all peripherals 	 Timer counter 	 5 x 32-bit 	 3 x 24-bit RTC 	 NFC-A tag interface for OOB pairing  

Nordic nRF52832 BLE Module

Raytac&rsquo;s MDBT42 is a BT5 and BT4.2 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF52832 SoC solution, which incorporates: GPIO, SPI, UART, I2C, I2S, PWM and ADC interfaces for connecting peripherals and sensors.

About the module: 	 1. Dual Transmission mode of BLE &amp; 2.4Ghz RF upon customer preference. 	 2. Compact size with (L) 13.8 x (W) 8.8 x (H) 1.9 mm. 	 3. Low power requirements, ultra-low peak, average and idle mode power consumption. 	 4. Be compatible with a large installed base of mobile phones, tablets and computers. 	 5. Fully coverage of BLE software stack 	 6. BLE &amp; RF transmission switching helps products fit all operation system and most hardware. 	 7. BT5 &amp; BT4.2 Bluetooth Specificaiton Certified 	 8. FCC/IC/CE/Telec/KC/SRRC safety regulation certification granted.FeaturesMulti-protocol 2.4GHz radio 	 32-bit ARM Cortex &ndash; M4F processor 	 512KB flash programmed memory and 64KB RAM 	 Software stacks available as downloads 	 Application development independent from protocol stack 	 On-air compatible with nRF51, nRF24AP and nRF24L series 	 Programmable output power from +4dBm to -20dBm 	 RSSI 	 RAM mapped FIFOs using EasyDMA 	 Dynamic on-air payload length up to 256 bytes 	 Flexible and configurable 32 pin GPIO 	 Programmable peripheral interface - PPI 	 Simple ON / OFF global power mode 	 Full set of digital interface all with Easy DMA including: 	 3 x Hardware SPI master ; 3 x Hardware SPI slave 	 2 x two-wire master ; 2 x two-wire slave 	 1 x UART (CTS / RTS) 	 PDM for digital microphone 	 I2S for audio 	 Quadrature demodulator 	 12-bit / 200KSPS ADC 	 128-bit AES ECB / CCM / AAR co-processor 	 Lowe cost external crystal 32MHz &plusmn; 40ppm for Bluetooth ; &plusmn; 50ppm for ANT Plus 	 Lowe power 32MHz crystal and RC oscillators 	 Wide supply voltage range 1.7V to 3.6V 	 On-chip DC/DC buck converter 	 Individual power management for all peripherals 	 Timer counter 	 5 x 32-bit 	 3 x 24-bit RTC 	 NFC-A tag interface for OOB pairing  

&nbsp;

DT-06 	 The package Includes: 1 x DT-06 Transmission Form Transparent Serial Port WiFi Wireless  Product Features: 	 Fully compatible with the original electrical interface and physical interface for transparent serial Bluetooth 	 Equipped with the firmware V3.0 transparent industrial transmission with the stability and reliability through the use of Web configuration 	 Equipped with the WiFi ESP-module M2 high-performance 	 Size: 34mm * 17mm * 4mm 	 Operating Voltage: 4.5V ~ 6.0V 	 TTL Operating Voltage: 3.3V (compatible with 5.0V) 	 Pin: STATE, TXD, RXD, EN 	 On Average Current: 80mA; during the transmission of data, it is 170mA; in the deep sleep mode, it is 20&mu;A; 	 It supports the command AT Serial 	 Supports reprogramming and updating the firmware OTA 	 With the transparent transmission without blemish between serial and WiFi 	 With HTTP Web Server, it supports the configuration parameters on the web page 	 It supports automatically reconnect to the WiFi STA mode and TCP Client 	 Supports baud rate, data bits, parity check, stop bit and / or the time subcontracting 	 Transmission Speed (Baud Rate) Compatible (bps): 300 / 600 / 1200 / 2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 74800 / 115200 / 230400 / 460800 / 921600 / 1843200 / 3686400 	 It Supports AP enablement, custom setting SSID / password, IP custom setting, and the lifetime of the network 	 It can make automatic scanning of WiFi hotspots peripheral, supporting the enabling STA, DHCP, the Custom setting IP 	 Server supports TCP, Client TCP Server UDP Client UDP and local communication UDP 	 It supports automatic DNS resolution for the address of the remote server 	 It supports control of the state by the command AT 	 With IO4 to show the Wi-Fi status 	 Operating Temperature: -40&deg;C -125&deg;C 	 Applications: Smart home, wireless connection and data transparent transmission, intelligent car control, wireless serial printer, industrial control, LED light, etc..  

DT-06

DT 06 WiFi Wireless Transmission with transparent serial port

Raytac&rsquo;s MDBT42Q-P512K is a BT5 and BT4.2 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF52832 SoC solution, which incorporates: GPIO, SPI, UART, I2C, I2S, PWM and ADC interfaces for connecting peripherals and sensors.
About the module: 	 1. Dual Transmission mode of BLE &amp; 2.4Ghz RF upon customer preference. 	 2. Compact size with (L) 16 x (W) 10 x (H) 2.2 mm. 	 3. Low power requirements, ultra-low peak, average and idle mode power consumption. 	 4. Be compatible with a large installed base of mobile phones, tablets and computers. 	 5. Fully coverage of BLE software stack 	 6. BLE &amp; RF transmission switching helps products fit all operation system and most hardware. 	 7. BT5 &amp; BT4.2 Bluetooth Specificaiton Certified 	 8. FCC/IC/CE/Telec/KC/SRRC safety regulation certification granted.FeaturesMulti-protocol 2.4GHz radio 	 32-bit ARM Cortex &ndash; M4F processor 	 512KB flash programmed memory and 64KB RAM 	 Software stacks available as downloads 	 Application development independent from protocol stack 	 On-air compatible with nRF51, nRF24AP and nRF24L series 	 Programmable output power from +4dBm to -20dBm 	 RSSI 	 RAM mapped FIFOs using EasyDMA 	 Dynamic on-air payload length up to 256 bytes 	 Flexible and configurable 32 pin GPIO 	 Programmable peripheral interface - PPI 	 Simple ON / OFF global power mode 	 Full set of digital interface all with Easy DMA including: 	 3 x Hardware SPI master ; 3 x Hardware SPI slave 	 2 x two-wire master ; 2 x two-wire slave 	 1 x UART (CTS / RTS) 	 PDM for digital microphone 	 I2S for audio 	 Quadrature demodulator 	 12-bit / 200KSPS ADC 	 128-bit AES ECB / CCM / AAR co-processor 	 Lowe cost external crystal 32MHz &plusmn; 40ppm for Bluetooth ; &plusmn; 50ppm for ANT Plus 	 Lowe power 32MHz crystal and RC oscillators 	 Wide supply voltage range 1.7V to 3.6V 	 On-chip DC/DC buck converter 	 Individual power management for all peripherals 	 Timer counter 	 5 x 32-bit 	 3 x 24-bit RTC 	 NFC-A tag interface for OOB pairing  
&nbsp;

Nordic nRF52832 BLE Module with low power and compact design

- LED Controller powered by Ethernet (POE+)
- Connection: POE+ Ethernet switch to eSPOT Connect to LED lamp with LED driver
- Control LED lamp up to 3pcs (Total max power: 25W) or 1pcs RGB LED lamp
- Application:
1) Lighting Control User control light through apps
2) Scheduled Alert Example: take medicine, morning call.
3) Hazard Warning Connected to Internet for weather alert e.g. Typhoon
- Range extend: wireless controller (eSPOT Link)

eSPOT Connect

eSPOT Connect LED Controller powered by Ethernet POE

Raytac&rsquo;s MDBT42Q-512K is a BT5 and BT4.2 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF52832 SoC solution, which incorporates: GPIO, SPI, UART, I2C, I2S, PWM and ADC interfaces for connecting peripherals and sensors.

About the module: 	 1. Dual Transmission mode of BLE &amp; 2.4Ghz RF upon customer preference. 	 2. Compact size with (L) 16 x (W) 10 x (H) 2.2 mm. 	 3. Low power requirements, ultra-low peak, average and idle mode power consumption. 	 4. Be compatible with a large installed base of mobile phones, tablets and computers. 	 5. Fully coverage of BLE software stack 	 6. BLE &amp; RF transmission switching helps products fit all operation system and most hardware. 	 7. BT5 &amp; BT4.2 Bluetooth Specificaiton Certified 	 8. FCC/IC/CE/Telec/KC/SRRC safety regulation certification granted.FeaturesMulti-protocol 2.4GHz radio 	 32-bit ARM Cortex &ndash; M4F processor 	 512KB flash programmed memory and 64KB RAM 	 Software stacks available as downloads 	 Application development independent from protocol stack 	 On-air compatible with nRF51, nRF24AP and nRF24L series 	 Programmable output power from +4dBm to -20dBm 	 RSSI 	 RAM mapped FIFOs using EasyDMA 	 Dynamic on-air payload length up to 256 bytes 	 Flexible and configurable 32 pin GPIO 	 Programmable peripheral interface - PPI 	 Simple ON / OFF global power mode 	 Full set of digital interface all with Easy DMA including: 	 3 x Hardware SPI master ; 3 x Hardware SPI slave 	 2 x two-wire master ; 2 x two-wire slave 	 1 x UART (CTS / RTS) 	 PDM for digital microphone 	 I2S for audio 	 Quadrature demodulator 	 12-bit / 200KSPS ADC 	 128-bit AES ECB / CCM / AAR co-processor 	 Lowe cost external crystal 32MHz &plusmn; 40ppm for Bluetooth ; &plusmn; 50ppm for ANT Plus 	 Lowe power 32MHz crystal and RC oscillators 	 Wide supply voltage range 1.7V to 3.6V 	 On-chip DC/DC buck converter 	 Individual power management for all peripherals 	 Timer counter 	 5 x 32-bit 	 3 x 24-bit RTC 	 NFC-A tag interface for OOB pairing  

My Sourcing

Unfollow this supplier?

Unfollow this supplier?