Siqi Technologies (Shenzhen) Co.,Ltd

Power Line Communication (PLC) technology transmits data through electrical wiring, featuring a "network wherever there is electricity" capability, eliminating the need for additional cabling and overcoming the limitations of wireless signal interference. Compared to wireless ZigBee, PLC offers superior communication stability and coverage in complex environments, providing consistent connectivity from basements to backyards while avoiding interference from other wireless devices. Furthermore, the physical connection characteristic of PLC enhances security, making it difficult for unauthorized parties to intercept, thereby offering higher levels of privacy protection and reliability for smart home systems. 

Siqi PLC System Topology

Siqi PLC System Topology for reliable smart home communication

Shenzhen MicroNature Innovation Technology Co Ltd

Products Description:  A lamp controller linked with an LED driver, communicates byHigh-Speed Power Line Communication (HPLC). Remotely turn ON/OFF, dimming(0-10V/PWM), data collection, 85-265VAC, 1-3W, IP66, lightning protection.  Features:  - Industrial-grade Quality:Aluminum alloy shell, compact in size, with an IP66 protection rating, and the maximum load ofsingle-channel is 800W. - Dual-channel control:Each channel can be independently controlled for power driving and data collection.  - Remote Control:Built-in PLC Communication Module, supporting remote switching, dimming (0-10V / PWM), configuration, and OTA upgrades. - Failure Detection &amp; Safety Protection:Supports active protection functions such as overcurrent and overload and can actively provide warnings and report faults. - Precise Measurement:Precise data collecting such as current, voltage, power, energy consumption, and temperature, with an error rate of less than 2‰. - Application Scenarios:Municipal Road lighting, tunnel lighting, and industrial lighting.   The MC-2P Dual Light Controller adopts broadband power line communication technology, which uses the existing power lines to realize communicationwithout additional wiringand reduces the construction cost. The communication speed is fast, and the peak rate at the physical layer can reach0.507Mbit/s.  MC-2P Dual light controller uses power line communication to collect data and report input current, voltage, active power, energy, power factor, temperature, on/off light status and so on. It uses Orthogonal Frequency Division Multiplexing (OFDM) modulation technology withstrong anti-interference ability. Automatic fast networking is supported. A maximum of15level trunks are supported over a long distance.   Key Parameters:  ·Communication based on PLC ·Dimming: PWM / 0~10V  ·Operating voltage: 85V-265VAC ·Overall power consumption: 1-3W ·Single-channel output current: 0-10A±2% Dual-channel output current: 0-20A±2% ·Single Load power rating: ≤800W Dual Load power rating: ≤1600W  ·Operating temperature: -40°C~+85°C  ·Industrial packaging protection: IP66   PLC Dual Light Controller can be used with gateway/traditional power supply/streetlight to achieve the role of remote monitoring, control and management of the street lighting network, and ultimately achieve the purpose ofenergy saving/cost reductionandefficiency increase.                N/A DALI KNX Bus RS-485 PLC-IoT Communication Medium TP TP TP Power Line Point-to-point Communication Distance 0.1 km 1 km 1 km 2km Mesh Networking NO NO NO Support Network Node Scale 64 200 32 500 Deployment Cost Requires Rewiring   High Cost Requires Rewiring   High Cost Requires Rewiring   High Cost No Additional Wiring Economical Maintenance Difficult Difficult Difficult Easy    

PLC Dual Light Controller, Dimming(0-10V/PWM), data collection, 85-265VAC, IP66

PLC Dual Light Controller with dimming and data collection features

A lamp controller linked with an LED driver, communicates byHigh-Speed Power Line Communication (HPLC). Remotely turn ON/OFF, dimming (0-10V/PWM), data collection, 90-264VAC, 2W, IP66, lightning protection.   Features:- Industrial-grade Quality:Aluminum alloy shell, compact in size, with an IP66 protection rating, and the maximum load is 400W. - Remote Control:Built-in PLC Communication Module, supporting remote switching, dimming (0-10V / PWM), configuration, and OTA upgrades. - Failure Detection &amp; Safety Protection:Supports active protection functions such as overcurrent and overload and can actively provide warnings and report faults. - Precise Measurement:Precise data collecting such as current, voltage, power, energy consumption, and temperature, with an error rate of less than 2‰. - Application Scenarios:Municipal Road lighting, tunnel lighting, and industrial lighting.   The MC-1P Single Light Controller adopts broadband power line communication technology, which uses the existing power lines to realize communication without additional wiring, and reduces the construction cost. The communication speed is fast, and the peak rate at the physical layer can reach 0.507Mbit/s.   MC-1P single light controller uses power line communication to collect data and report input current, voltage, active power, energy, power factor, temperature, on/off light status and so on. It uses Orthogonal Frequency Division Multiplexing (OFDM) modulation technology with strong anti-interference ability. Automatic fast networking is supported. A maximum of 15 level trunks are supported over a long distance.    Key Parameters: * Communication based on PLC (Power Line Carrier Communication) * Dimming: PWM / 0~10V * Operating voltage: 90-264VAC * Frequency: 50-60Hz * Static power: &lt; 2W * Output current: 0-8A±2% * Load power rating: ≤400W * Operating temperature: -40°C~+85°C * Industrial packaging protection: IP66     PLC Single Light Controller can be used with gateway/traditional power supply/streetlight to achieve the role of remote monitoring, control and management of the street lighting network, and ultimately achieve the purpose ofenergy saving,cost reductionandefficiency increase.                 N/A DALI KNX Bus RS-485 PLC-IoT Communication Medium TP TP TP Power Line Point-to-point Communication Distance 0.1 km 1 km 1 km 2km Mesh Networking NO NO NO Support Network Node Scale 64 200 32 500 Deployment Cost Requires Rewiring   High Cost Requires Rewiring   High Cost Requires Rewiring   High Cost No Additional Rewiring Economical Maintenance Difficult Difficult Difficult Easy    

PLC Single Light Controller, Dimming (0-10V/PWM), data collection, 90-260VAC, IP66

PLC Single Light Controller with remote dimming and data collection

Product Introduction MN-G60P three-phase rail gateway is an IoT gateway based on power line carrier communication (PLC) technology. It can be widely used in smart home, industrial lighting, stadium lighting and other fields. The gateway motherboard has a built-in complete object model. Through the instantiation of the object model, each gateway's downstream device can be a controller, sensor and control panel, as well as any combination of these devices. The gateway is a communication transmitter connecting it to the cloud big data. It has functions such as communication management, data transmission, protocol conversion, data processing and forwarding, which makes it convenient for users to understand, manage and control electrical equipment anytime and anywhere. Product Features Equipped with a PLC interface chip that complies with the IEEE P1901.1 standard, it can establish a communication link up to 1Mbps on 90V to 260V DC or AC power lines.Equipped with AllWinner V3s high-performance SoC, based on Linux kernel, complete PLC protocol stack.The gateway is equipped with 64MB of DDR2 RAM and 32MB of Flash, which can complete complex high-density computing. It is equipped with a PLC communication interface and an Ethernet interface, as well as an RS485 interface.Built-in WEB server, users can fully control the device and scene through the WEB server.Supports up to 256 terminal devices.Supports 64 scenes, and the scene linkage of the device is synchronized, with fast response speed and timely attribute update.Supports remote upgrade.Electrical Characteristics Debug Interfaface Dimension   SAAS Cloud Platform  

Power Line Communication PLC-IoT Three-phase Rail Gateway

Power Line Communication PLC IoT Three phase Rail Gateway

Product Description:  Concentrator, a communication bridge between the server (by 4G/Ethernet) and devices (by PLC). It has a built-in LCD display and smart meter, it supports 4 digital switches, updated by OTA, 3*220/380VAC, IP52, and lightning protection.     Features: -National Standard:Compliant with the National Power Grid Standards, compatible with both three-phase four-wire and three-phase five-wire systems.-Network Compatibility:Supports 4G / Ethernet. -Open Protocols:Supports MQTT and Modbus, enabling quick integration with third-party cloud platforms and devices.  -Local Control:Capable of independently executing lighting strategies and controlling sub-devices in offline mode.  -Application Scenarios:Municipal Road lighting, tunnel lighting, and industrial lighting.        MG-E3 Smart Lighting Concentrator adopts thelatest PLC-IoT communication technologyand is used with PLC Single Light Controllers/Dual Light Controllers or PLC smart driver power supplies. It is capable ofcommunication managementanddata transmission,protocol conversion,data processing and forwardingand other functions and can facilitate users to understand, manage and control lighting devices anytime anywhere.  MG-E3 smart lighting concentrator has excellentterminal electromagnetic compatibilityperformance, can resist the interference of high-voltage spikes, strong magnetic fields, strong static electricity, lightning surges, and works undera wide range of temperature. It is sealed by ABSwaterproof and flame-retardantmaterial with wall-mounting adapter, compact and easy to install.                         High Level of Security:Utilizes Modbus encryption algorithm to ensure communication security and prevent data leakage.  Strong Stability:Supports automatic reconnection, exception recovery, and self-monitoring to ensure real-time device availability and normal system operation.    Key Parameters: ·LCD display.·PLC communication module.·OS: High-speed 32-bit ARM &amp; Linux.·Interface: Ethernet, RS485, and USB.·Network: 4G/Ethernet·Local Capacity: 500 lights at maximum·Point-to-Point Communication Distance: 2 kilometers at maximum·Networking: Supports Mesh networking technology.·Working temperature: -40℃~+70℃·Lighting Protection.·Memory capacity: 256MB.·Protection level: IP52.·Remote upgrade support.       N/A DALI KNX Bus RS-485 PLC-IoT Communication Medium TP TP TP Power Line Point-to-point Communication Distance 0.1 km 1 km 1 km 2km Mesh Networking NO NO NO Support Network Node Scale 64 200 32 500 Deployment Cost Requires Rewiring   High Cost Requires Rewiring   High Cost Requires Rewiring   High Cost No AdditionalRewiring Economical Maintenance Difficult Difficult Difficult Easy  

Power Line Carrier, PLC Smart Light Concentrator for Street Light/Industrial light, MicroNature MG-E3 Street Light Outdoor Gateway

PLC Smart Light Concentrator for street and industrial lighting

Xiamen PVTECH Corporation Limited

US Market: PLC(G24)LED Lamp（ETL/DLC5.1/FCC）

StarFive(Hong Kong) Limited

Powered by JH-7110 RISC-V application processor, the RISC-V OpenPLC Kit integrates the OpenPLC open-source framework. It supports multiple mainstream industrial protocols and is suitable for industrial and home automation, IoT development, and SCADA (Supervisory Control and Data Acquisition) system deployment. Paired with StarFive's EtherCAT master solution, it enables microsecond-level real-time control to meet the demands of high-precision, high-reliability industrial scenarios, facilitating end-to-end intelligent upgrades from lab to production line.  Powered by JH-7110 RISC-V Application Processor with integrated OpenPLC framework. Supports mainstream industrial protocols (EtherCAT, Modbus-TCP, etc.) for industrial/home automation, IoT development, and SCADA (Supervisory Control and Data Acquisition) system implementation. Integrated with StarFive's EtherCAT Master Solution to achieve microsecond-level real-time control, engineered for high-precision, reliability-critical industrial environments. Accelerates end-to-end intelligent transformation from lab prototyping to production-line deployment.  VisionFive 2 SBC: The world's first high-performance RISC-V Single Board Computer with an integrated 3D GPU 64-bit quad-core high-performance RISC-V CPU,running up to 1.5 GHz；Support OpenCL 3.0, OpenGL ES 3.2, and Vulkan 1.3.1；Equipped with a variety of interfaces including M.2, CSI, DSI, HDMI, eMMC, USB 3.0, 40-pin GPIO, Gigabit RJ45 Ethernet port, and TF card slot；Support multi-lane video decoding at 4K@60fps with H264/H265, and multi-lane video encoding at 1080p@30fps with H265;Onboard 40-pin GPIO header compatible with Raspberry Pi SBCs;Open-source SBC enables broad software compatibility, including Debian support. 

RISC-V OpenPLC Kit

RISC V OpenPLC Kit powered by JH 7110 processor

Product Description  MP-6500 PLC Module is a fully integrated Power Line Communication (PLC) communication module with ultra-compact size, compact structure, and simple wiring. It can be widely used in various PLC instant communication applications, such as smart street lighting, smart homes, smart parking, central air conditioning, and ubiquitous power Internet of Things (IoT) terminal devices.   Features - State Grid Standard: The product specifications and pin design comply with the national power grid standards.- Three-phase Coupling: Compatible with three-phase four-wire or three-phase five-wire systems.- Stable Communication: External ultra-strong LD signal amplifier, high sensitivity, strong anti-interference capability, long transmission distance.-Rapid Networking: Fast networking in a 200-node scale and 2-level network scenario within 10 seconds.- Multiple Interfaces: Supports UART/PWM/GPIO/SPI/ADC/I2C- Applicable Products: Concentrator gateway, three-phase gateway.  The module size and interface ofMP-6500 PLC Modulecomply with the State Grid QGDW 1375.2-2019 standard.  MP-6500 PLC Module is based on the Hi3921EV100 chip, which integrates high-speed/low-speed multi-mode power line carrier communication modem and ARM Cortex-M3 processor. The Hi3921EV100 chip supports P1901.1 and supports OFDM/FSK modulation.  The onboard external Line-Driver improves the transmission signal strength to meet customers' long-distance requirements.  MP-6500 PLC Module is equipped with the LiteOS open-source operating system for the Internet of Things, providing a more open development environment and a faster, more secure operating system.             Module NameMP-6500Main ICHi3921EV100Main InterfacesPLC, UARTCommunication MethodPower line carrier communication, supports. P1901.1, supports OFDM/FSK modulation.SizeL*W*H: 92.8mm*63.8mm*26.1mmStatic Power≤0.10W (no packet transmission during networking)Operating Voltage12VDC ±3%Operating Temperature-40°C to +85°CStorage Temperature-40°C to +125°C                 Shenzhen MicroNature Innovation Technology Co., Ltd.is a national high-tech enterprise specializing in PLC-IoT smart industrial lighting solutions. The company integrates design, research and development, manufacturing, and marketing. We haveleading High Speed Power Line Communication (HPLC) technology, anopen SAAS platform,well-established smart hardware systemandabundant experiencein industrial-grade smart lighting solutions such as Municipal Road lighting, tunnel lighting, and factory lighting...   If you are interested in our products, please feel free to contact us. We look forward to hearing from you.  Thank you for watching.  

Power Line Carrier PLC Module for Smart Street Light Industrial Lighting Parking Lot Lighting MicroNature MN-L80A Module

Power Line Carrier PLC Module for Smart Street Light

Product Description  MN-L80A PLC Moduleis a fully integrated Power Line Communication (PLC) communication module with ultra-compact size, compact structure, and simple wiring. It can be widely used in various PLC instant communication applications, such as smart street lighting, smart homes, smart parking, central air conditioning, and ubiquitous power Internet of Things (IoT) terminal devices.  Features-Stable Communication: The most comprehensive noise library, AI anti-noise algorithms, and strong anti-interference capability, enabling long-distance transmission.-Rapid Networking: Fast networking in a 200-node scale and 2-level network scenario within 10 seconds.-Multiple Interfaces: Supports UART/PWM/GPIO/SPI/ADC/I2C, and external FLASH.-Flexible Design: Supports both horizontal and vertical soldering methods to meet various application scenarios.-Easy to Use: The module has built-in coupling circuits, allowing direct connection to 220V mains power and facilitating testing.-Suitable Applications: High-power power supply drivers and single-lamp controllers.    MN-L80A PLC Moduleis based on the PS0211 chip, which integrates a high-speed/low-speed multimode power line carrier communication modem and an ARM Cortex-M3 processor. The PS0211 supports P1901.1 and offers support for OFDM/FSK modulation, tonemask, and SunSpec standards.  MN-L80A PLC Moduleprovides various peripheral interfaces such as UART, PWM, GPIO, ADC, SPI, and I2C, and integrates a built-in line driver. It offers a more open development environment and enables faster and more secure operating systems.  Module NameMN-L80AMain InterfacesUART, PWM, GPIO，ADC,SPI，I2CCommunication MethodPower Line Carrier Communication, Supports OFDM/FSK modulation.DimensionsL*W*H: 33.0*18*5.8±0.3mm（excluding pin height, actual height depends on pin installation method)Installation MethodThe module is connected to the mainboard using pin headers. It is recommended to use corresponding pin sockets on the mainboard for plug-in installation.Operating Voltage3.3±0.3 VdcStorage Temperature-40°C to +125°C Shenzhen MicroNature Innovation Technology Co., Ltd.is a national high-tech enterprise specializing in PLC-IoT smart industrial lighting solutions. The company integrates design, research and development, manufacturing, and marketing. We have leading High Speed Power Line Communication (HPLC) technology, an open SAAS platform, well-established smart hardware system and abundant experience in industrial-grade smart lighting solutions such as Municip al Road lighting, tunnel lighting, and factory lighting...       N/A DALI KNX Bus RS-485 PLC-IoT Communication Medium TP TP TP Power Line Point-to-point Communication Distance 0.1 km 1 km 1 km 2km Mesh Networking NO NO NO Support Network Node Scale 64 200 32 500 Deployment Cost Requires Rewiring   High Cost Requires Rewiring   High Cost Requires Rewiring   High Cost No Additional Rewiring Economical Maintenance Difficult Difficult Difficult Easy 

PLC Module Stable, 10s Fast Networking, Multi Interface, Enabling Long-distance Transmission

MN L80A PLC Module for stable and fast networking

Zhejiang Eboy Technology Co., Ltd.

 	 lighting control system based on zigbee or PLC  

Lighting Control System

Lighting Control System based on zigbee or PLC

Zhejiang Fonda Technology Co Ltd

 	 PLC transmission 	 Standard NEMA 7-PIN interface, plug and play； 	 Remotely turn ON/OFF, built-in 16A relay; 	 Support dimming interface: 0-10V(default) and PWM (customizable); 	 Remotely read electrical parameters: current, voltage, power, power factor and consumed energy; 	 Support recording total energy consumed and resetting. 	 Lamp failure detection: LED and HID lamp; 	 HID power failure and compensation capacitor failure; 	 Automatically report failure notification to server; 	 Automatically locate its father node(RTU); 	 Lightning protection; 	 Waterproof: IP65;  

Street Lighting Lamp Controller PLC NEMA

GuangZhou Regin XianLi Mdtlnfo Tech Co.,Ltd

Additional I/O unit for the freely programmable controllers EXOcompact and EXOclever with 16 supplementary I/Os per Add:io. Possibility to expand an EXOclever controller with unlimited I/Os and an EXOcompact with up to 50 I/Os. The Add:io units fit smoothly together, requiring minimal space.   

REGIN IO-EC32DIA-X IO-EC32DIB-X IO-EC8UID8UOB-X Add:io, additional I/O units

REGIN IO EC32DIA X additional I O unit for controllers

REGIN IO-EC16DOE-X IO-EC16UID-X IO-EC16UOB-X  Add:io, additional I/O units

REGIN IO EC16DOE X additional I O unit for controllers

Shen Zhen ZK-Link Tecknology Co.Ltd.

 	 Advanced OFDM technology is adopted 	 High precision of power sampling  

PLC--Smart Lighting Control

ST&T Electric Corporation

 This finely manufactured&nbsp;PLC and Wi-Fi extender effectively transmits electronic signals, meeting your everyday needs. The device has a compact size and clean design. Made in high-quality, the device is reliable and safe to use.    500Mbps PLC/Wi-Fi range extender.   Voltage: 100-240V AC, 50/60Hz.  

PLC and Wi-Fi Extender

Risecomm Microelectronics (Shenzhen) Co Ltd

&nbsp;
&nbsp; Data conversion between PLC ammeters and RS485 meters
&nbsp; Support connection with a number of RS485 meters
&nbsp; Support DL/T 645 communication protocol
&nbsp; RS485 port can be set to different baud rate
&nbsp; Support infrared data communication

PLC Module for Concentrators

Power 7 Technology

 	 Transmit network signal with AC powerline 	 Built-in Wi-Fi 	 One button pair function 	 One PLC adapter can support&nbsp;7 PLC extender maximum  

PLC Adapter Device

PLC Adapter Device for network signal transmission

ENPLUG Co., Ltd.

 	 Ultra-high speed network solutions. 	 PLC is establish reliable and fast network through home&#39;s existing wires.  

Power Line Communication

Power Line Communication for ultra high speed networking

HYC System Optoelectronics Technology

Features: 
   Low insertion loss.   Low PDL.   Compact design.   Good channel-to-channel uniformity.   Wide operating wavelength: from 1260nm to 1650nm.  Applications: 
   FTTX systems.   PON networks.   CATV links.   Optical signal distribution.  Compliance: 
   Telcordia GR-1209-CORE-2001.   Telcordia GR-1221-CORE-1999.   RoHS.  

PLC Splitter

PLC Splitter with low insertion loss and compact design

Peitan Technology Co., Ltd.

This is a security and automation controller with a high-precision structure. It is sturdily constructed for enhanced durability. The digital screen allows easy information reading.
 
  Standalone, smart and compact controller with a&nbsp;high CP value. 
  Supervise 2AI/8DI/5DO and 1-door access. 
  Support data connect cloud data base without fix IP. 
  Offer alarm SMS and power monitoring ability. 
  Configure SMS no. and alarm message by user. 
  Offer free monitoring software. 
 

Security and Automation Controller

Security and Automation Controller with high precision structure

Yalong Science & Echnology Group

   Yalong YL-335B automatic production line trainer is composed of supply unit, processing unit, loading unit, transfer unit and distribution unit.   The electrical layout is in double-drawer pattern, all electrical controllers are installed on the drawers, in accordance with the real industrial patterns.   On the equipment, each unit is an independent system, as well as an electromechanical system. Each unit is mainly a pneumatic execution unit, but the transfer unit mechanical arm movement is driven by servomotor, with precise position control, the drive system has a long travel, with one-dimension position control system.   The distribution unit belt drive adopts general frequency converter drive 3-phase asynchronous motor AC transmission.   The position control and frequency converter technology is the most widely used electrical control technology in modern industry.   On YL-335B, there are many types of sensors, used to detect materials movement positions, status, colors and natures.   The sensor technology is a key technology in electromechanical technology for modern industrial automation.   In the control, YL-335B adopts RS485 PLC network control mode, that is to say, each unit has a PLC to its control task, each PLC communication with each other by RS485 serial ports for distribution control.   The users can select various PLC and the related RS485 communication modes according to actual requirements, to compose a small PLC network.   The small PLC network has simple structure and low cost, and is widely used in the small automatic production lines, occupies a large share in modern industrial network communication.   Furthermore, with RS485 serial communication PLC network technology, the students can learn field bus technology, industrial Ethernet technology in the future.  

Automatic Production Line Trainer

Automatic Production Line Trainer for industrial automation education

Single phase PLC module
Functions and features:
Read meter sequence number automatically upon power up, no need to separately set up the network address for PLC module
Supports DL/T645-1997/2007 protocol and transparent data transfer functions
Supports carrier sense and packet data relay functions
Supports dynamic auto-routing algorithm
Meet State Grid standard of electrical and mechanical specifications

My Sourcing

Unfollow this supplier?

Unfollow this supplier?