Fenghua (Hong Kong) Electronics Ltd.

Chip resistors are available in different resistance values, tolerance levels, and power ratings to accommodate various circuit requirements. The resistance values can range from a few ohms to several megaohms, providing flexibility for different applications. The tolerance level indicates the acceptable deviation from the specified resistance value, ensuring accurate and consistent performance. Common sizes of chip resistors include: 0402: This size measures 0.04 inches by 0.02 inches (1.0mm by 0.5mm) and is commonly used in compact electronic devices and densely populated circuit boards. 0603: These resistors have dimensions of 0.06 inches by 0.03 inches (1.6mm by 0.8mm) and are widely used in consumer electronics, telecommunications, and automotive applications. 0805: With measurements of 0.08 inches by 0.05 inches (2.0mm by 1.25mm), 0805 resistors are popular for their versatility and ease of handling. They are commonly found in a wide range of electronic circuits. 1206: These resistors measure 0.12 inches by 0.06 inches (3.2mm by 1.6mm) and are often used in various electronic applications that require higher power handling capabilities. 1210: With dimensions of 0.12 inches by 0.10 inches (3.2mm by 2.5mm), 1210 resistors offer larger power ratings and are suitable for applications that require higher power dissipation. These sizes represent some of the most commonly used chip resistor dimensions. However, there are many other sizes available to meet specific circuit requirements. It is essential to select the appropriate chip resistor size based on factors such as power requirements, board space, and thermal considerations. 

Chip Resistor (AEC-Q200)

Chip Resistor AEC Q200 for various circuit requirements

Q-Nitto Hong Kong Limited

Model No. : CRCW080510K0FKEAHP. Material : N/A Purpose : Use for automotive and various fields Spec : RES,10K,1%,0.33W,0805;R,THICK FILM Product Width : 1.25mm Description : The Vishay CRCW-HP e3 series are pulse proof, high power thick film chip resistors. The CRCW-HP e3 series resistors have pure tin solder contacts on the Ni barrier layer that provides compatibility with the reflow soldering process.  Excellent pulse load capability Enhanced power rating Double side printed resistor element Protective overglaze AEC-Q200 qualified, rev. C compliant Available in ±0.5%, ±1% and ± 5% tolerance Zero ohm jumper are available for all sizes with very high current Power rating is double than the D/CRCW e3 series Superior ant surge and pulse characteristics compared to D/CRCW e3 series  Resistance :10kohm Power Rating :500mW Resistor Technology :Thick Film Product Range :CRCW-HP e3 Series Voltage Rating :150V Operating Temperature Max :155°C SVHC :No SVHC (27-Jun-2024) Resistance Tolerance :± 1% Resistor Case / Package :0805 [2012 Metric] Resistor Type :Pulse Proof, High Power Temperature Coefficient :± 100ppm/K Product Length :2mm Operating Temperature Min :-55°C Qualification :AEC-Q200 More details : please refer to catalogues  MOQ : 10pcs   

High power thick film chip resistors (CRCW080510K0FKEAHP.)

High power thick film chip resistors CRCW080510K0FKEAHP

Ningbo Jiuyi Electronic & Technology Co Ltd

 	 Mini power meter without current display &amp; re-chargeable battery Power supply: 230V/50Hz Max.load:16A,3680W Voltages:150V~-276V~  

Mini Power Meter

Mini Power Meter for measuring electrical power

Ninghai Yingjiao Electrical Co Ltd

Model： YSL50F
Dimming Type &nbsp;
Power: 50W max.
Input： 100-240VAC 50/60Hz
Output Voltage: 3-48V
Output Current: 10MA-5550MA
Inrush Current:（浪涌电流） 65 Amps max. at 230VAC/50Hz,full load
Leakage Current: 2.5mA Max. at 264VAC input
No Load Power Consumption ： ＜0.5W
Protections： Short Circuit /Over Current /Over Voltage/over temperature protection
Short Circuit Protection (SCP)： Protection to Zero Voltage
Over Voltage Protection (OVP): &le;Vout*150%
Over Current Protection (OCP): 110%-180%
Working TEMP.: -20&deg;C-50&deg;C
Working Humidity： 5%-90% RH non-condensing
Storage TEMP.,Humidity and altitude: -40℃ ~+70&deg;C ambient temperature and a 5% to 95% relative humidity range throughout an altitude range of -60 meters to +5000 meters AMSL.
Certificates and approvals: CE,EMC,RoHS,REACH
EMI EMISSION: Conducted disturbance at mains terminals:EN 55015Radiation Test&amp;Conduction Test: EN 55015Magnetic Emission:EN55015:2013
Harmonic Test : EN 61000-3-2
Voltage fluctuation and Flicker Test : EN 61000-3-3
EMS IMMUNITY: ESDTest:IEC 61000-4-2
RSTest:IEC 61000-4-3
EFT/B ImmunityTest:IEC61000-4-4
Surge Immunity :IEC61000-4-5
Conduted RF Immunity:IEC 61000-4-6
Power frequency magnetic field:IEC 61000-4-11Voltage dips and interruptions,100% reduction: IEC 61000-4-11Voltage dips and interruptions,30% reduction: IEC 61000-4-11
MTBF: 100000 hours minimum at full load at 25℃ ambient
Life: 3-5 years alternative

LED POWER SUPPLY

LED power supply model YSL50F with multiple protections

 	 Mini power meter without current display &amp; Re-chargeable battery 	 Power supply: 230V/50Hz 	 Max.load: 16A, 3680W 	 Voltages: 150V~-276V~  

Mini Power Meter with rechargeable battery and max load of 16A

Model： YSL40&nbsp; constant voltage
Power: 40W max.
Input： 100-240VAC 50/60Hz
Output Voltage: 12-100V
Output Current: 100MA-3300MA
Inrush Current: 65 Amps max. at 230VAC/50Hz,full load
Leakage Current: 2.5mA Max. at 264VAC input
No Load Power Consumption ： ＜0.5W
Protections： Short Circuit /Over Current /Over Voltage/over temperature protection
Short Circuit Protection (SCP)： Protection to Zero Voltage
Over Voltage Protection (OVP): &le;Vout*150%
Over Current Protection (OCP): 110%-180%
Working TEMP.: -20&deg;C-50&deg;C
Working Humidity： 5%-90% RH non-condensing
Storage TEMP.,Humidity and altitude: -40℃ ~+70&deg;C ambient temperature and a 5% to 95% relative humidity range throughout an altitude range of -60 meters to +5000 meters AMSL.&nbsp;
Certificates and approvals: TUV-GS&nbsp; CB
EMI EMISSION: Conducted disturbance at mains terminals:EN 55015&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Radiation Test&amp;Conduction Test: EN 55015&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Magnetic Emission:EN55015:2013
Harmonic Test : EN 61000-3-2
Voltage fluctuation and Flicker Test : EN 61000-3-3
EMS IMMUNITY: ESD&nbsp; Test:IEC 61000-4-2
RS&nbsp;&nbsp;&nbsp; Test:IEC 61000-4-3
EFT/B Immunity&nbsp;&nbsp; Test:IEC61000-4-4
Surge Immunity :IEC61000-4-5
Conduted RF Immunity:&nbsp; IEC 61000-4-6
Power frequency magnetic field:IEC 61000-4-11&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Voltage dips and interruptions,100% reduction: IEC 61000-4-11&nbsp;&nbsp; Voltage dips and interruptions,30% reduction: IEC 61000-4-11&nbsp;&nbsp;
MTBF:(平均无故障时间） 100000 hours minimum at full load at 25℃ ambient
Life: 3-5 years alternative

LED power supply model YSL40 with constant voltage features

Model： YCL100&nbsp; constant voltage series
Power: 100W max.
Input： 100-240VAC 50/60Hz
Output Voltage: 12-48V
Output Current: 100MA-8300MA
Inrush Current: 65 Amps max. at 230VAC/50Hz,full load
Leakage Current: 2.5mA Max. at 264VAC input
No Load Power Consumption ： ＜0.5W
Protections： Short Circuit /Over Current /Over Voltage/over temperature protection
Short Circuit Protection (SCP)： Protection to Zero Voltage
Over Voltage Protection (OVP): &le;Vout*150%
Over Current Protection (OCP): 110%-180%
Working TEMP.: -20&deg;C-50&deg;C
Working Humidity： 5%-90% RH non-condensing
Storage TEMP.,Humidity and altitude: -40℃ ~+70&deg;C ambient temperature and a 5% to 95% relative humidity range throughout an altitude range of -60 meters to +5000 meters AMSL.&nbsp;
Certificates and approvals: TUV-GS&nbsp; CB
EMI EMISSION: Conducted disturbance at mains terminals:EN 55015&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Radiation Test&amp;Conduction Test: EN 55015&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Magnetic Emission:EN55015:2013
Harmonic Test : EN 61000-3-2
Voltage fluctuation and Flicker Test : EN 61000-3-3
EMS IMMUNITY: ESD&nbsp; Test:IEC 61000-4-2
RS&nbsp;&nbsp;&nbsp; Test:IEC 61000-4-3
EFT/B Immunity&nbsp;&nbsp; Test:IEC61000-4-4
Surge Immunity :IEC61000-4-5
Conduted RF Immunity:&nbsp; IEC 61000-4-6
Power frequency magnetic field:IEC 61000-4-11&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Voltage dips and interruptions,100% reduction: IEC 61000-4-11&nbsp;&nbsp; Voltage dips and interruptions,30% reduction: IEC 61000-4-11&nbsp;&nbsp;
MTBF: 100000 hours minimum at full load at 25℃ ambient
Life: 3-5 years alternative

LED power supply model YCL100 with high power output

Kopen Electrical Co Ltd

The featured dual-power soldering iron offers two wattage settings and comes with high, low and off modes. It has a switch on the handle for mode selection and has a sturdily attached metal tip. This soldering iron offers comfortable and precise maneuvering and is suitable for handling different soldering tasks.
<ul>
	<li>Advanced dual-power soldering iron with high, low and off modes.</li>
	<li>Power: 230VAC, 50Hz.</li>
	<li>Offer two wattage settings for you to work according to your own preference.</li>
	<li>Comes with high, low and off modes.</li>
	<li>Switch on the handle for mode selection.</li>
	<li>High quality eco tip.</li>
	<li>Delicate metal tip is sturdily attached for a long serving time.</li>
	<li>With an ergonomic handle.</li>
	<li>Offer comfortable and precise maneuvering</li>
	<li>With a LED light indicator.</li>
	<li>With a metal sheet stand.</li>
	<li>Suitable for handling different soldering tasks.</li>
	<li>Comply with IEC 60335-1 / 60335-2-45.</li>
	<li>Comply with EN 55014 / 61000.</li>
	<li>&nbsp;</li>
	<li><br>
	&nbsp;</li>
</ul>


Dual-Power Soldering Iron

Dual Power Soldering Iron with dual wattage settings

Ningbo Miclion LED Lighting Co., Ltd.

Model：YSL40&nbsp; constant voltagePower:40W max.Input：100-240VAC 50/60HzOutput Voltage:12-100VOutput Current:100MA-3300MAInrush Current:65 Amps max. at 230VAC/50Hz,full loadLeakage Current:2.5mA Max. at 264VAC inputNo Load Power Consumption ：＜0.5WProtections：Short Circuit /Over Current /Over Voltage/over temperature protectionShort Circuit Protection (SCP)：Protection to Zero VoltageOver Voltage Protection (OVP):&le;Vout*150%Over Current Protection (OCP):110%-180%Working TEMP.:-20&deg;C-50&deg;CWorking Humidity：5%-90% RH non-condensingStorage TEMP.,Humidity and altitude:-40℃ ~+70&deg;C ambient temperature and a 5% to 95% relative humidity range throughout an altitude range of -60 meters to +5000 meters AMSL.&nbsp;Certificates and approvals:TUV-GS&nbsp; CBEMI EMISSION:Conducted disturbance at mains terminals:EN 55015&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Radiation Test&amp;Conduction Test: EN 55015&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Magnetic Emission:EN55015:2013
Harmonic Test : EN 61000-3-2
Voltage fluctuation and Flicker Test : EN 61000-3-3EMS IMMUNITY:ESD&nbsp; Test:IEC 61000-4-2
RS&nbsp;&nbsp;&nbsp; Test:IEC 61000-4-3
EFT/B Immunity&nbsp;&nbsp; Test:IEC61000-4-4
Surge Immunity :IEC61000-4-5
Conduted RF Immunity:&nbsp; IEC 61000-4-6
Power frequency magnetic field:IEC 61000-4-11&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Voltage dips and interruptions,100% reduction: IEC 61000-4-11&nbsp;&nbsp; Voltage dips and interruptions,30% reduction: IEC 61000-4-11&nbsp;&nbsp;MTBF:(平均无故障时间）100000 hours minimum at full load at 25℃ ambientLife:3-5 years alternativeDimension:160*58*20mm&nbsp;Weight:170gPacking:100PCS/CTN,35*28*35cm

LED POWER SUPPLY Model YSL40 with multiple protections

Ningbo GP Energy Co., Ltd

Peak Power CR2032 1B

Fuzhou Ace Opto Co., Ltd.

 	 CL-300W 	 Input Voltage: AC170-265VAC, 50/60Hz 	 Input Current: AC 3.1-2.3A 	 Output Voltage: DC 12V 	 Output Current: DC 25A 	 Output Power: 300W 	 IP67  

Power Supply

Power Supply with 300W output and IP67 rating

Cixi Zhongyi Electronics Factory

Mounting TypeplugDescriptionpower breadboardPlace of OriginZhejiang, ChinaBrand NameZYModel Numberbread board ZY-206H power breadboardApplicationelectronicSeriespower breadboardFeaturessolderlessPoints2390Insertion Range0.4~0.8mm diameterPlateflameresistant material, black colorContact life50,000 timesInput Voltage100V to 240Vboard(cm)17.5*14.5*0.9plate(cm)25*19.7*5.5Typepower breadboardCertificationRoHSPackingCarton

2390 points power breadboard

Huichuan Electric Limited Company of Weifang

6821,13001,13002,13003,13005,13007,13009 etc.

Power Transistor

Ningbo Snappy Optoelectronics Co., Ltd.

 This LED power supply is made with quality elements for excellent performance. Well-made, it significantly optimizes the performance of an LED light fixture. This power supply is compliant with international standards.&nbsp; 
 
  Input: 200-240V AC. 
  Power: 60W. 
  PC body. 
  Open-circuit, short-circuit, overload, overheat protection. 
 

LED Power Supply

LED Power Supply for optimal LED light performance

Peak Power CR2016 1B

Model： YSL30T&nbsp; constant voltage
Power: 45W max.
Input： 100-240VAC 50/60Hz
Output Voltage: 3-48V
Output Current: 10MA-2500MA
Inrush Current: 65 Amps max. at 230VAC/50Hz,full load
Leakage Current: 2.5mA Max. at 264VAC input
No Load Power Consumption ： ＜0.5W
Protections： Short Circuit /Over Current /Over Voltage/over temperature protection
Short Circuit Protection (SCP)： Protection to Zero Voltage
Over Voltage Protection (OVP): &le;Vout*150%
Over Current Protection (OCP): 110%-180%
Working TEMP.: -20&deg;C-50&deg;C
Working Humidity： 5%-90% RH non-condensing
Storage TEMP.,Humidity and altitude: -40℃ ~+70&deg;C ambient temperature and a 5% to 95% relative humidity range throughout an altitude range of -60 meters to +5000 meters AMSL.&nbsp;
Certificates and approvals: CE,EMC,RoHS,REACH
EMI EMISSION: Conducted disturbance at mains terminals:EN 55015&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Radiation Test&amp;Conduction Test: EN 55015&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Magnetic Emission:EN55015:2013
Harmonic Test : EN 61000-3-2
Voltage fluctuation and Flicker Test : EN 61000-3-3
EMS IMMUNITY: ESD&nbsp; Test:IEC 61000-4-2
RS&nbsp;&nbsp;&nbsp; Test:IEC 61000-4-3
EFT/B Immunity&nbsp;&nbsp; Test:IEC61000-4-4
Surge Immunity :IEC61000-4-5
Conduted RF Immunity:&nbsp; IEC 61000-4-6
Power frequency magnetic field:IEC 61000-4-11&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Voltage dips and interruptions,100% reduction: IEC 61000-4-11&nbsp;&nbsp; Voltage dips and interruptions,30% reduction: IEC 61000-4-11&nbsp;&nbsp;
MTBF:(平均无故障时间） 100000 hours minimum at full load at 25℃ ambient
Life: 3-5 years alternative

LED POWER SUPPLY Model YSL30T with constant voltage and multiple protections

FOSHAN SHINE-STAR OPTOELECTRONICS TECHNOLOGY CO LTD

 	 Constant current LED driver 	 Light Source: LED 	 IP20 	 Indoor used 	 Advantages:With SCP, OTP and OVP function. 	 Operating temperature -40℃~60℃. 	 Comply with safety of CE. 	 Comply with EMC standard. 	 MTBF:550,000hours. 	 Rectangular shape, plastic case. 	 Labeled with electric data on the exterior. 	 Stable operation, high reliability. 	 Offer multifunction protection. 	 Long lasting durability.&nbsp; 	 CE,TUV certified.  

 LED Power Supply

LED Power Supply with constant current driver and multifunction protection

Peak Power CR2450 1B

Peak Power CR2025 1B

Mean Well (Hong Kong) Holding Limited

 	 Constant power mode, various dimming functions&nbsp; 	 Voltage (V):180-528 	 Power (W):650 	 Types:Horticulture lighting&nbsp; 	 Model: HVGC-650  

Light Power Supply

Light Power Supply with constant power mode and dimming functions

AEI Protect-On Systems Ltd

The AD-2312 is full feature multi-purpose power supplies designed for powering electric lock and keypads in access control systems. They are also ideal power packs for alarm and surveillance systems that required back-up power.The AD-2312 is built-in with split-decoder that is compatible with all the DK-2800 series keypads for split-decoded operation to up-grade the keypads’ security level in preventing sabotage. Features: AD-2312 – Full Feature Dual Output Power SupplyBuilt-in Split-decoder Compatible with DK-2800 KeypadsInput Voltage : 220-240VAC 50HzOutput Power : 13.7VDC/0.5A Regulated – For Keypads,12VDC/3A Un-regulated – For Electric LockBack-up Battery ; 12V/7.0Ah (not include), Built-in ChargerApprovals : CE-EMC, CE-LVD &amp; CE-R&amp;TTE ComplianceSolid State Output for Fail-safe or Fail-secure Electric LockOperation Modes : Stand-alone or Split-decodedBuilt-in Door ChimeDimensions : 272(H) X 165(W) X 80(D) mmWeight : 3.2 kg

AD 2312 Power Supply for access control and electric locks

Foshan Huaquan Electrical Lighting Co Ltd

   LED constant voltage driving power supply.   Input current: 0.09A (maximum).   Power factor: &ge;0.35.   Idle load power: less than 0.5W.   Output power: 3W.   Input power: 4.5W max.   Output voltage: 3 to 5V DC.   Output current: 600&plusmn;20mA.   TA: -20 to 50&deg;C.   TC: 70&deg;C.   Input voltage: 100 to 240V, 50/60Hz.   IP rate: IP20.   High-performance.   Simple usage.   Enhance power efficiency.   High-quality LED power regulator.  

LED Power Supply for efficient lighting solutions

Peak Power LR44 10B

Guangzhou LongChuang Electronic Technology Co.,Ltd

This power adapter is meticulously made for supplying stable power to your devices. This power adapter is made of quality plastic for high durability. The robust construction ensures a long lifespan.
 
  Indoor use. 
  LED power adapter. 
  Voltage: DC 12V, AC 100-240V. 
  Material: plastic. 
 

My Sourcing

Unfollow this supplier?

Unfollow this supplier?