JJ Electronics Assembly Company

Features: 	 Permanent temperature override. 	 Operate as a thermometer in OFF mode. 	 Heating or Cooling selectable by DIP switch. 	 Short cycle delay for cooling mode. 	 Battery operate (3 VDC) only two external wires are connected. 	 External temperature sensor is also available (optional). 	 Preset degree C or F display.  Specification: 	 Temperature range: 5-30 degree C. 	 Differential: +/- 0.5 degree C from set point. 	 Batteries: 2xAA size batteries. 	 Rated switching power: 250VAC, 5Amps Resistive load or 2 Amps inductive load. 	 Mini On timer in heat mode: 1 minute. 	 Mini Off time in cool mode: 3 minutes. 	 Battery Low: Thermostat will turn off and low battery indication will be showed on the display.  

Digital Thermostat

Digital Thermostat with temperature control features

 Features:  	 Preset 7 days programs 	 Preset programs easy to change 	 Link with receiver via RF 	 Control distance within 60 meters at open site 	 Manual / Permanent tempeature override 	 Both time and temperature (room and set) permanently showing on the display 	 Short cycle delay for cool mode 	 Holiday mode 	 Large LCD easy to read 	 Minimum On time under heating mode : 1 minute 	 Minimum Off time under air-conditioning mode : 3 minutes 	 Auto matching code between transmitter and receiver 	 Over 2000 codes to be selected   Specification:  	 Transmitter: 2 x AA 1.5VDC batteries Receiver Input: 230VAC 50-60Hz 	 Transmitter and Receiver Frequency: 433 MHz 	 Receiver Output Rating: 230VAC 16 Amps Resistive, 9 Amps 230VAC Inductive 	 Temperature range: 5-30℃ 	 Differential: &plusmn;0.5℃ from set temperature 	 Temperature accuracy: &plusmn;0.5℃ 	 CE &amp; R&amp;TTE Approved  

Wireless Digital Programmable Thermostat 

Wireless Digital Programmable Thermostat with advanced features

China Iot Holdings Limited

It can monitor body temperature for 24 hours, and will alarm you when temperature out of range 

smart thermometer

GuangZhou Regin XianLi Mdtlnfo Tech Co.,Ltd

Fan-coil thermostat with touch display and communication, 230 V AC on/off outputs Slim electronic fan-coil thermostat for room temperature control. Automatic or manual change-over between heating and cooling. The thermostat has a function for 3-speed fan control (for fan-coil), a built-in temperature sensor, backlit touch display, and an input for a hotel key card or an occupancy detector. Technical data Supply voltage :230 V ~ (207…253 V ~ 50/60 Hz) Power consumption :&lt; 3 VA Protection class :IP30 Ambient humidity :10…90 % RH (non-condensing) Ambient temperature :0…50 °C Measuring range, temperature :0…50 °C Sensor element, temperature :NTC Accuracy, temperature :±0.5 K Output signal, temperature :NTC Display :Built-in Display type :LED-backlit LCD Setpoint adjustment :5…35 °C Mounting :Room (flush-mounted with screw distance cc 60 mm) Installation :Fan-coils, 2- or 4-pipe Dimensions, external (WxHxD) :95 x 95 x 50.5 mm DI：1 DO: 5 AI: 1 

REGIN RCFD-230C Fan-coil thermostat with touch display and communication

REGIN RCFD 230C Fan coil thermostat with touch display

Au One Electrical Co Ltd

 Featured here is a rigid thermostat&nbsp;with a compact size. It is finely made for reliable performance and&nbsp;high stability. This thermostat is mainly applied&nbsp;for household appliances.&nbsp;&nbsp; 
 
  Rating: 125V AC 15A / 250V AC 10A (resistive load). 
  Maximum rated temperature: 260&deg;C. 
  Maximum ambient temperature: 300&deg;C. 
  Endurance: 100,000 cycles. 
  Safety compliance: UL, CUL, VDE, CE, CQC, RoHS. 
 

Thermostat for Household Appliances

Yueqing Langir Electric Co Ltd

This switch is designed for&nbsp;operation and temperature adjustment of thermostats. Simply turn the switch to the desired temperature. The wall-mounted design can fit into various styles of interior settings. 
   Large setting range.   Small size.   Easy to mount.   High switching performance.  

Thermostat & Heater

Thermostat Heater for temperature adjustment and easy mounting

Tronico Technology Co Ltd

The air-con controller helps you to control your air-con from your mobile. User can turn on their A/C and set a desired temperature before arrive home. It integrated with a temperature sensor and helps to monitoring.

Technical Specification 	 RF Frequency：919.80 MHz (HK), 868.40 MHz (EU/CN) 	 Transmission range：25 m Indoor (Line of sight) ; Outdoor 50 m 	 Input Power：DC 5V or AAA Battery x 3 	 Battery Life (For battery operated)：1 year 	 Temperature Detection Range：0 ~ 40 ℃ , Accurcy : 1℃ 	 Air-Con IR Library：Embedded 	 Dimension (W*H*D)：70*70*35 mm 	 Weight：35 g (Battery chassis excluded) ; 60 g (Battery chassis included) 	 Accessory：Battery Chassis, Battery, USB Power cord 	 Operation Temperature：0 ~ 40 ℃ 	 Relative Humidity：5 ~ 95 % 	 Environmental Characteristic：IP20, Indoor Use Only  

Air-Con Controller

Air Con Controller for smart home temperature control

Cixi Fenry Electrical Appliances Co., Ltd.

120x550 fins, LED display, 3 heating, digital thermostat, with timer, Wi-Fi control 7 pins,9 pings, 11 pins, 13 pins available over heater protection with feet 

Oil Heater with Wi-Fi

With demand-based control you can reach optimal comfort while minimizing energy consumption in sustainable buildings of the future. The Regio RCX room controller has a very flexible application for the installer that can configure almost every possible room application, without programming knowledge. It’s also installation-friendly with detachable bottom plate with terminals. Terminals are detachable to simplify measurement for maintenance. Controllers in different rooms and zones can be connected to a field bus enabling communication with a central SCADA system, via RS485 (BACnet, Modbus or EXOline).Regio RCX room controller also seamlessly integrates with our building management system Arrigo, our EXO-system range, as well as different sensors for a comprehensive solution. The stand-alone Regio controllers can easily be configured for a specific application via the Regin:GO app or Application Tool. 

Regin RCX-THCVP-D Regio RCX Smart Room Controllers 

Fan-coil thermostat with on/off outputs Electronic fan-coil thermostats for room temperature control. Automatic or manual changeover between heating and cooling. The thermostats have a function for 3-speed fan control (for fan-coil), a built-in temperature sensor, backlit display, and an input for a window contact or an occupancy detector. RCF-230CD* is BTL listed.   

REGIN RCF-230D RCF-230CD Fan-coil thermostat with on/off outputs

REGIN RCF 230D Fan coil thermostat with on off outputs

 	 Large LCD Display 	 Control your Heater or Air Conditioner for maintaining your desired comfort temperature. 	 Plug-In design for easy installation. - Red LED indicates Power On and Green LED indicates Heater / Air Conditioner On. - Replaceable 3VDC Li battery for back up battery power reserve more than 100 hours.   General Specification:   	 Temperature Range: 5-30 Degree C 	 Temperature Accuracy: +/- 1Degree C Rated Input Voltage: 230VAC 50Hz Maximum Load: 16 Amps at 230VAC Resisitive Load or 9 Amps Inductive Load Approval CE, LVD, EMC, ROHS, IP30  

Digital Plug In Thermo-Controller

Digital Plug In Thermo Controller for temperature control

Fan-coil thermostat with on/off outputs Electronic fan-coil thermostats for room temperature control. Automatic or manual changeover between heating and cooling. The thermostats have a function for 3-speed fan control (for fan-coil), a built-in temperature sensor, backlit display, and an input for a window contact or an occupancy detector. RCF-230CD* is BTL listed.  

REGIN RCF-230TD RCF-230CTD Fan-coil controller for thermal or 3-point actuators

REGIN RCF 230TD Fan coil controller for thermal or actuators

 	 220-240V, 50/60HZ, 1500W, 2 heat settings 	 LED display easy to read 	 24H timer&nbsp; 	 Adjustable thermostat control 	 Over heating protection 	 IP24 waterproof 	 With remote control 	 X-shape aluminum heating element 	 Freestanding or wall mounted 	 WIFI system for optional&nbsp;  

Convector Heater with WiFi

Presented is a thermostat protector with a simple design to fit in different types of thermostat devices. The potent metal structure is coated for enhanced endurance. This thermostat protector is the perfect complement for a temperature control system.    Voltage: 250V.    Rated current: 16A.    Maximum operation temperature: 160℃.    Endurance: 10,000 cycles.    Certification: VDE, RoHS.

Thermostat Protector

Thermostat Protector for various thermostat devices

Reacts to both temperature and electric current, it provides precise temperature control even when the thermostat is remote to the heating component. Has been widely applied in oven, roaster, skillet and deep fryer. 

Adjustable Thermostat

Adjustable Thermostat for precise temperature control

Room temperature controller for 0...10 V DC or 3-point actuators This room controller is primarily intended for control of heating or cooling in zone control systems. It has an input for a presence detector (occupancy control). The controller also has an input for change-over, which makes it possible for the control function to switch between heating and cooling. Technical data Supply voltage: 24 V AC, ±15 % 50...60 Hz, 2 VA Output : 0...10 V DC, 1 mA or 3-point, 24 V AC, 1 A Inputs : Two digital and one NTC sensor Setpoint : 0...40 °C P-band :0.5...50 K Protection class :IP20 

REGIN AL24A1T Room temperature controller for 0...10 V DC or 3-point actuators

REGIN AL24A1T Room temperature controller for heating and cooling

Regio Mini room controllers Stand-alone controllers for control of heating and cooling in a single zone or room The Regio Mini controllers can be configured for a specific application via the display or dipswitches (in most cases, though, the default settings can be applied). The controllers have a built-in temperature sensor. Alternatively, an external temperature sensor can be connected. RC is the basic model in the range. The other models have various functions, indicated by the letters in the product name: D = Display, F = Fan control (3-speed), H = Hidden setpoint, O = Occupancy button, T = 3-point output   

REGIN Regio Mini room controllers RC RC-O RC-H RC-DO RC-DFO RC-T RC-TO RC-DTO

Regio Mini room controllers for heating and cooling control

This series of thermo-control device is snap-type thermostat. It consists of a thermo-disc sitting on a ceramic bracket. Shape of disc changes according to the ambient temperature and turns the thermostat ON-&amp;-Off.TC-301P series thermostat installed with PTC pellet to provide a manual reset feature. Both items have the merit of precise temperature control and can be applied in high temperature ambient. There is no electric current passing through the thermo-disc so that current loading will not affect the temperature control performance. It has been widely applied in cooking appliance and heating appliance. 

Thermo-control

Thermo control device with precise temperature control

Wall mounted electric heating controller intended for control of radiators or electric heating coils. It is a complete controller with built-in sensor and setpoint adjustment. It pulses the whole load on/off and utilises time-proportional triac control. Both automatic control function adaptation, P- or PI-control and supply voltage adaptation, 230 V / 400 V. Technical data Supply voltage:230...400 (210 - 415 V ~ 50/60 Hz 16 A) Pulse period:60 s Mounting:Wall Power dissipation :20 W of heat at full load Protection class:IP20 P-band:20 K (rapid temperature changes), 1.5 K (slow temperature changes) I-time:6 min (rapid temperature changes) Ambient temperature :0...30 °C Ambient humidity: Max. 90 % RH, non-condensing Storage temperature :-40...+50 °C Dimensions:95 x 153 x 41 mm Cable connection :Cage clamp Inputs/outputs (I/Os) Output load:Resistive load, max 16 A, min 1 A Sensor inputs :External main sensor and external sensor for temperature limitation Sensor element:NTC Regin standard Setpoint range:0...30 °C (the external sensor determines the temperature range) Setpoint alternatives :Either internal setpoint potentiometer or external setting device Night setback:0...10 K Indication:Red LED that is lit when power is pulsed to the heater Article PULSER-M :Electric heating controller with min./max. limitation PULSER-ADD :Add-on unit 

REGIN PULSER-M PULSER-ADD – 1- OR 2-PHASE Electric heating controller with PI-control, 230...400 V AC, wall mounting

REGIN PULSER M electric heating controller with PI control

REGIN Frost protection thermostat High quality frost protection thermostats for use in cooling, heating and ventilation systems. Technical data Contacts :SPDT microswitch Switch capacity :15 (8) A, 24…250 V AC Accuracy :± 1K Ambient temperature :Max. 55 °C Ambient humidity :10...90 % RH (non-condensing) Casing :Base in ABS, cover in transparent Polycarbonate (PC) Dimensions:140 x 62 x 65 mm (cable gland included) Weight:340 g Protection class :IP65  

REGIN FT18 FT30 FT60 Frost protection thermostat

Room controller, temperature Temperature controller for control of e.g. an EC fan or a damper in air handling or demandcontrolled ventilation applications. Technical data Supply voltage ： 85…230 V AC, 50/60 Hz Working range, temperature ：5…30 °C Outputs ：1 analogue output 0...10 V (RL &gt; 10 K) Mounting ：Room Protection class ：IP30 

REGIN AL230A Room temperature controller

901X-FSeries(XstandsforA,B,C...)TheFseriesisasnap-typethermostatwiththermalcut-out.innormalcondition, thermostatservesasanadjustabletemperaturecontroldevice.In abnormal situation where ambient temperature exceeds the safety limit, thermal cut-out will open and cut off the power to protect the product.Has been widely used in small electrical appliances such as steam iron, skillet ,grill and oven. 

Adjustable Thermostat for temperature control in appliances

The controller can be used with internal or external setpoint. Automatic control function adaptation, P- or PI-control. The controller can also be set to be controlled by an external 0...10 V DC signal. Technical data Supply voltage ：3-phase, 210...255 / 380...415 V AC, automatic adaptation Setpoint ：0…30 °C (the sensor determines the range) Max. load ：Max. 25 A, min. 3 A/phase Sensor inputs ：Two, main and min./max. limiting sensors (NTC sensor) Control signal ：0...10 V DC (external signal) Mounting ：Wall Protection class ：IP30 P-band ：Supply air temperature control: 20 K, fixed.Room temperature control: 1.5 K, fixed I-time (supply air temperature control) :6 min, fixed Pulse period :6...120 s 

REGIN TTC2000 – electric heating controller for wall mounting, 3-phase, 210...415 V

REGIN TTC2000 electric heating controller for wall mounting

Art Fair Enterprise Ltd

 	 Measures and broadcasts temperature and humidity readings to smartphone and mobile devices through Bluetooth 4.0. 	 Comes with an easy-to-use app with customized settings for each user. 	 Multiple connections between phones and devices. 	 Allow one phone to read more than one thermometer, or one thermometer to be read by more than one phone. 	 Temperature alert and various weather indexes including: WBGT with flu alert, heat index, mold index and comfort index. 	 Data logging function with 30 days downloadable data. 	 Nearest 7 days include daily max/min and hourly record, other 23 days include daily max/min (version with 7 days of daily max/min downloadable data also available). 	 Downloaded data can be plotted as graph or displayed in list view or calendar view and exported. 	 Data of more than one logger can be plotted in same graph (maximum 6 parameters). 	 Rectangular shape. 	 Durable construction. 	 High accuracy. 	 Ideal for indoor use. 	 Operated by 2 x AAA batteries. 	 Support both iPhone, iPad (iOS 7.0 or above) and Android phone and pad (Android 4.3 or above). 	 Suggested places to use: home, office, nursery, wine cellar, cooking/barbecue, refrigerator, greenhouse, shopping mall.  
&nbsp;

My Sourcing

Unfollow this supplier?

Unfollow this supplier?