TUV Rheinland HK Ltd

  Our Audits  
We perform audits based on the specifications of the R&amp;TTE directive. We also perform compatibility inspections and quality inspections. These include:   Audits for electromagnetic compatibility   Audits for radio test series   Audits for electrical safety and compliance with health and safety regulations   Notification in individual EU countries   Audits for compliance with interface parameters in line with national and international standards and individual manufacturer specifications   Compatibility and quality inspections for analog and digital terminals and devicesIssuing an audit report and a certificate  

Radio Installations and Telecommunications Products Testing

Satisloh Asia Ltd.

The local presence and availability of Satisloh specialists assure excellent uptime for the production equipment. Our hotlines in Europe, Asia, North and Middle &amp; South America provide around the clock phone support 6 days a week allocating expertise to secure your production. 

Remote Service

The Hong Kong Standards And Testing Centre Ltd (STC)

With over 50 years of experience, STC has been a leader in EMC testing and is a&nbsp;Local Certified Body (LCB) under the&nbsp;Office of the Communications Authority (OFCA)&nbsp;of the Hong Kong Government. Our state-of-the-art laboratory, RF and EMC testing chambers allow for ElectroMagnetic Interference (EMI) and ElectroMagnetic Susceptibility (EMS) testing, as well as RF testing for radio frequency products.

STC&rsquo;s EMC testing and RF testing capabilities are recognized and comply with internationally standards to help manufacturers, retailers and importers meet regulatory requirements and quickly get products to international markets.

  Radio Frequency (RF)&nbsp;Testing   	 American RF Standards&nbsp;(ANSI C63.10, 47 CFR Part 15) 	 Australian RF Standard&nbsp;(AS/NZS 4268) 	 Canadian RF Standards&nbsp;(RSS-Gen, RSS-210, RSS-220, RSS-222, RSS-247, RSS-310) 	 European RF Standards&nbsp;(EN 300086, EN 300113, EN 300220, EN 300296, EN 300328,EN 300330, EN 300390, EN 300422, EN 300440,&nbsp;EN 301166, EN 301178, EN 301357, EN 301559,&nbsp;EN 301893,EN 302018,&nbsp;EN 302065, EN 302195,&nbsp;EN 302208, EN 302502, EN 302536, EN 302608, EN 302609, EN 303203, EN 303204, EN 303406,EN 303354) 	 Hong Kong Radio Specifications&nbsp;(HKCA 10XX)  If you have any further question, please feel free contact us at&nbsp; enquiry@stc.group &nbsp;or visit our website:&nbsp; https://www.stc.group/en/contact 

Radio Frequency (RF) Testing

We offer radio frequency and electromagnetic testing services for customers. We use high-quality equipment to test and provide precision results. Our services are professional and reliable. Providing technical support services.Assist and strengthen the product modification.To know more or enquire any specific service, please visit https://www.stc.group and fill in our enquiry form on https: www.stc.group/contact. 

Radio Frequency and Electromagnetic Testing

Svi Public Co Ltd

Electronic manufacturing service, start from PCBA to Final Assembly. Factories located in Thailand, Austria, Slovakia and Hungary. 	 Audio 	 Medical 	 Telecommunication 	 Industrial 	 Transportation 	 etc.,  

Electronic Manufacturing Service - Audio Equipment

UltraOne Technologies Limited

Wide range coverage for indoor/outdoor and wireless bridge solution.  

Wireless Network

Provide wide range networking equipment and cabling system for different sectors, i.e. SME, Education, Hospitality, and Construction Sector.  

Network Infrastructure

Professional Display Solution that allow our customers to easily and consistently develop top quality content and create impactful messages via an integrated network media.  

Professional Display Solution

Kensen Digital Limited

Kensen Digital is an innovative and technically oriented company focus on developing and manufacturing of digital electronic products including various types of digital radio and wireless technologies such as in-car and portable DAB/DAB+/HD radios. We provide ODM/OEM services as a turnkey solution provider to realize your concepts and ideas. We work with customers closely at all stages of design and manufacture, from concept to finish, to bring unique products. When customers provide concept and specifications, we then work out a rough total cost for design, prototype, and estimated unit cost. 

ODM/OEM Services

Drawing on a complete understanding of government regulations and policy that apply to electrical and electronics industry, STC can help you to test Radio Frequency (RF) and ElectroMagnetic Compatibility (EMC) in accordance with various international standards.  EMC Tests for R&amp;TTE: 27 MHz Remote controlled Transmitter and Receiver27 MHz Walkie Talkie40 MHz Remote controlled Transmitter and Receiver433MHz Remote controlled Transmitter and Receiver868MHz Remote controlled Transmitter and Receiver2.4GHz Remote controlled Transmitter and ReceiverTo know more or enquire any specific service, please visit https://www.stc.group and fill in our enquiry form on https: www.stc.group/contact. 

EMC Tests for R&TTE

E-PowerSpot Hong Kong Limited

E-PowerSpot has set up over 2,000 power bank rental stations across Hong Kong! With the advancement of technology, mobile devices have become an indispensable part of daily life, and E-PowerSpot is committed to ensuring that every user stays connected at all times. Our advertising displays are equipped with high-definition screens, effectively conveying information to various target audiences and widely applicable across different sectors in Hong Kong. E-Powerspot offers flexible partnership options; whether for short-term or long-term cooperation needs, we can provide customized solutions based on specific client requirements. All advertising displays support multiple playlists and can play in a 24-hour loop, integrating brand information into consumers' daily lives and becoming the advertising format closest to consumers and retail points. 

Digital Advertising Display for Charging Stations

V-Trust Inspection Service Co., Ltd

Wide Expertise in the TV Industry  V-Trust's inspection services for TVs and their accessories provide invaluable support to buyers, ensuring that products comply with customer requirements and quality standards.  Whether it is an order of LED TVs or SKD/CKD TV sets, the V-Trust team conducts a thorough assessment of the exterior and screen condition, ensuring there are no physical damages or defects, such as dead pixels or discoloration. Functionality and safety testing covers power, battery, display brightness and quality, sound performance, connectivity options, and other tests before products are released to the market.  V-Trust helps buyers minimize risks and avoid costly issues by providing detailed inspection reports with photographic evidence available within 6 to 24 hours after the inspection.  Why V-Trust  ✔ Full-Time Inspectors Only: We do not hire part-time QC staff or outsource to other firms. This approach serves as a key anti-bribery measure and ensures the highest level of reliability in our inspection reports. ✔ Diverse Product Range: Our team covers a wide range of product categories, including electronics, electrical products, lighting, building materials, furniture, home décor, kitchenware, textiles, apparel, and industrial goods. ✔ 2,500+ Checklists: We offer comprehensive checklists for various product lines, drawing on our extensive QC experience. ✔ Online Booking: Easily book services through our advanced online system, and access inspection results and supply chain statistics via the QC dashboard. ✔ Quick and Efficient Service: Receive same-day quotations, with reports available 6 to 24 hours after inspection. We also offer free laboratory testing and regulatory consultations.  About V-Trust  V-Trust is the largest product inspection company in Asia, employing only full-time inspectors. With over 600 staff across 10 Asian countries, we conduct more than 110,000 inspections and audits annually, serving over 13,000 buyers worldwide.  We are experts in the quality control industry, offering a wide range of cost-effective services, including product inspections, factory audits, laboratory testing, and product certification.  V-Trust operates in China and key export markets such as India, Vietnam, Malaysia, Thailand, Bangladesh, Pakistan, Cambodia, Indonesia, and Myanmar.  For more information, please contact us:Website: www.v-trust.comEmail: cs@v-trust.com 

TV & Accessories Product Inspection

Unitronics Company Limited

Unitronics collaborates closely with customers and partners, understanding their needs and developing innovative solutions. We build long-term relationships based on trust, shared experience, and mutual success, enabling us to achieve business objectives together with customers.Our specialists precisely understand our customers' challenges and needs, and propose solutions to each problem through our technical support with system construction and software development, along with cooperation with the manufacturers and various know-how. We specialize in: Software DesignHardware DevelopmentFirmware Design &amp; DevelopmentApps developmentManufacturing Capabilities &amp; Support Services 

Total embedded electronic solutions

All electrical and electronic products that manufacturers plan to sell in the United States must comply and meet relevant RF and EMC requirements under the&nbsp;Federal Communications Commission (FCC).

FCC&nbsp;testing and authorization involves two approval procedures - &#39;Certification&#39;&nbsp;and &#39;Supplier&rsquo;s Declaration of Conformity (SDoC)&#39;.

The approval procedure required to be used is specified in the applicable&nbsp;FCC&nbsp;rule part(s) that apply to the radio frequency functions of a device or an end product. In general, except when otherwise stated in a rule, intentional radiators(transmitters) arerequired to be approved using the certification procedure,and unintentional radiators (e.g.digital circuitry) are approved using the&nbsp;SDoC&nbsp;procedure.

STC&rsquo;s technical competence meets&nbsp;FCC&nbsp;requirements for various scopes of accreditation for testing performed in support of&nbsp;SDoC&nbsp;and Certification.

  FCC Recognized Accredited Scope   	 Unintentional Radiators&nbsp;(FCC Part15 Subpart B) 	 Intentional Radiators&nbsp;(FCC Part 15 Subpart C) 	 U-NII without DFS Intentional Radiators&nbsp;(FCC Part 15 Subpart E) 	 UWB Intentional Radiators&nbsp;(FCC Part 15 Subpart F) 	 White Space Device Intentional Radiators&nbsp;(FCC Part 15 Subpart H) 	 Industrial, Scientific, and Medical Equipment&nbsp;(FCC Part 18)  If you have any further question, please feel free contact us at&nbsp; enquiry@stc.group &nbsp;or visit our website:&nbsp; https://www.stc.group/en/contact 

FCC Testing

Electronic Manufacturing Service
Our industry focus includes industrial products, high end telecommunications, office automation, professional audio and video products, automotive electronics, medical devices, etc. The advanced solutions are sure to keep you on the cutting edge.

Electronic Manufacturing Service

Radio frequency and electromagnetic compatibility (EMC) Testing: The EMC testing service reveals the performance of your products in electromagnetic conditions.Conducting RF testing, electromagnetic compatibility testing (i.e. electromagnetic interference &amp; electromagnetic susceptibility) in accordance to standards of Australia, Canada, China, Europe, Hong Kong, Japan, Kuwait, Korea, New Zealand, Saudi Arabia, the United States, etc.Providing technical support services.Assisting customers on product modification in order to meet stringent standards of various countries.The international certifications that we can assist customers to obtain, and accreditation/recognition that we have gained: (Europe) CE, RTTE Certification; (Germany) DAkkS; (USA) FCC, TCB; (Canada) IC; (China) CNAS; (Australia/New Zealand) C-Tick; (Japan) VCCI; (Hong Kong) HKSI.To know more or enquire any specific service, please visit https://www.stc.group and fill in our enquiry form on https: www.stc.group/contact. 

EMC Testing Service

Shenzhen Huachuang hengda Technology,Ltd

The electronics manufacturing services(EMS) we provide cover almost the entire product cycle, from electronic design, prototyping, and PCB assembly, to cable and harness assembly, full system integration, product testing, and supply chain management. Our full-service electronic manufacturing services are characterized by superior quality and fast turnaround times, which enable us to meet the various project needs of our customers. 

Electronic Manufacturing Services

Ecosage Limited

EcoSage is an ISO 14001 EMS accredited and government recognized company specialized in recycling and recovery of waste electrical and electronic equipment. We provide one-stop solution for corporate to obsolete their used IT assets in an environmentally-friendly and cost effective way. We offer professional services with reasonable prices.   IT asset end of life recycling service.   Reliable service.  

IT Asset Recycling Service

Provide High Quality Surveillance Solution with Analytics Solution.  

Surveillance & Security System

We provide fully turn-key solutions that integrate innovative EMS products with quality manufacturing. Our industry focus includes industrial products, high end telecommunications, office automation, professional audio and video products, automotive electronics, medical devices, etc. The advanced solutions are sure to keep you on the cutting edge.
 
  Covering a wide industry. 
  Experienced in this field. 
 

EMS Turn-Key

SGS HK Ltd

As Wi-Fi becomes the preferred mode of connectivity, both private and corporate consumers are choosing certified wireless products with more confidence. Wi-Fi certification according to the Wi-Fi Alliance testing standards is an internationally recognized seal of approval. Manufacturers of wireless devices sold in global markets rely on certification to demonstrate products have met industry standards for interoperability, security, and application-specific protocols. Wi-Fi 6E is the next-generation wireless standard capable of operating in the 6 GHz band at speeds up to 9.6 Gbps. The “E” in Wi-Fi 6E stands for Extended, referring to the extension of the usable frequency range, which provides enhanced stability and improved performance, which should be especially noticeable on a network that supports a number of Wi-Fi 6E devices. Our Wi-Fi certification testing services include: Wi-Fi certification testing for 802.11 a/b/gWi-Fi pre-testing for 802.11 a/b/g productsWe also offer Laboratory rental services which can provide: Application Special Device (ASD) TestingWPA2 testWMM (QoS) testing802.11h+dExtended EAP     SGSexperts are capable of significantly reduce the turnaround time by taking advantage of our state-of-the-art system and the highly automated testing software. 

Wifi Testing Service

Drawing on a complete understanding of government regulations and policy that apply to electrical and electronics industry, STC can help you to test Radio Frequency (RF) and ElectroMagnetic Compatibility (EMC) in accordance with various international standards.  EMC Tests for FCC and IC standards: A. Digital Devices Computer or peripherals Class AComputer or peripherals Class B (e.g. Keyboard, display card, multi-function card, printer, monitor, mouse and scanner etc.)Digital Devices (e.g. video game, etc.)Game controller for console [e.g. Playstation, etc.]Battery-operated Handheld GamesAC operated handheld games B. Radio Frequency Devices AM/FM Broadcast Receiver (DC)AM/FM Broadcast Receiver (AC or AC/DC)DC operated CD/VCD/DVD PlayerAC/DC operated CD/VCD/DVD PlayerAM/FM Broadcast Receiver with CD/VCD/DVD PlayerCar Radio with CD/VCD/DVD27 MHz Remote controlled Transmitter (1 channel)27 MHz Walkie Talkie (1 channel)49 MHz Transmitter (1 channel)49 MHz Walkie Talkie (1 channel)49 MHz Receiver (1 channel)315 to 433 MHz Transmitter (1 channel)315 to 433 MHz Receiver (1 channel)900MHz Transmitter (1 channel)900MHz Receiver (1 channel)2.4GHz Transmitter (1 Pair)Multi-band Broadcast Receiver (AC or AC/DC)Microwave OvenEnergy Saving LampElectronic BallastPocket TVTo know more or enquire any specific service, please visit https://www.stc.group and fill in our enquiry form on https: www.stc.group/contact. 

EMC Tests for FCC and IC standards

We provide our electronic manufacturing services (EMS) to various industries. In PCB Assembly, we utilize most assembly technologies, including Thru-Hole axial/radial assembly and SMT assembly. Our manufacturing stage supports services like small batches (samples), pilot runs, mass production, and logistics management.  PCB Design for Manufacture and Assembly (DFMA)Design for testability (DFT)Quality and TestingLogistics management

Manufacturing Capabilities & Support Services (EMS)

HONGKONG YILAW INSPECTION AND TESTING TECHNOLOGY CO., LIMITED

FCC (US)Ensure your electronic products meet U.S. Federal Communications Commission requirements before entering the market. Service Highlights Identify applicable FCC rules for electronic and wireless products Conduct electromagnetic interference (EMI) and radiofrequency (RF) testing Prepare and review technical documents, test reports, and labeling Manage certification submission to FCC-recognized bodies Reduce risk of border rejections or costly recalls Why Choose ECQA Specialists in U.S. regulatory compliance and documentation Partnership with accredited FCC-recognized testing laboratories Detailed guidance on labeling, documentation, and certification workflows Streamlined coordination for faster market entry About ECQAECQA is a third-party inspection and quality control service provider operating across Asia, Europe, and other major global manufacturing hubs. We offer product inspections, factory audits, testing, and certification to ensure quality and compliance. Book FCC Certification Services TodayAchieve FCC compliance and enter the U.S. market with confidence. Contact us for a quotation. 

My Sourcing