REC Green Technologies Co., Ltd.

iFCU™ has successfully attained the Platinum recognition in CIC Green Product Certification.iFCU™adopted the patented technology with rotor of a permanent magnet to generate magnetic flux. Its advantages are to eliminate the source of power loss and achieve a high energy efficient operation.By replacing mechanical brushes, permanent magnet motor can also minimize the noise level and waste heat generation, thus improves motor lifespan.With variable speed drive, the motor further enhances efficiency system compared to traditional fixed speed AC motor designs.Major Features:Variable speed FCU fully controllable “AUTO” mode is available in iFCU™, stepless variable fan speed is controlled based on room temperature set point. Reduce energy use while maintaining comfortable condition, e.g. unoccupied mode to maintain the minimal RPM and energy ussage. Programme Customization to fit client’s application/configuration Tailor-made programme to work with different system and fit the occasions requirements. Modbus Thermostat, Room control unit (0-10V), Group Control, RPM adjustment &amp; wireless group control etc. Duct type sensor Installed in return-air box to control temperature accuracy up to ± 0.5oC to increase human comfort. Both high &amp; low static Applicable to both high &amp; low static pressure setting. Wi-Fi Control Can be controlled through any mobile device. 

iFCU™ Intelligent Fan Coil Unit (EC Motor / BLDC Motor / PM Motor)

Refined Motor Company Limited

Refined Motor Co. was born out of a pressing need to address the alarming rate of vehicle scrappage across the globe, driven by the rapid rise of electric vehicles. Founded by a group of engineers, the company set out to create a sustainable solution that would not only reduce waste but also promote the adoption of clean energy transportation.The company, witnessing the increasing number of traditional gasoline vehicles being discarded as more consumers opted for electric counterparts, recognized a unique opportunity. We believe that many existing vehicles still had significant potential and could be transformed into electric ones, thereby extending their lifespan and reducing environmental impact.Starting from a modest workshop, the team focused on developing an innovative conversion solution that could be optimize the conversion process. Our goal was to make the conversion process fast, accessible and affordable, allowing car owners to embrace electric mobility without the need to purchase entirely new vehicles.Refined Motor Co. rapidly gained traction by demonstrating the benefits of their conversions, including lower operating costs, reduced emissions, and improved performance. They partnered with leading institutions and automotive experts to promote awareness about the advantages of vehicle electrification.Today, Refined Motor Co. stands as a beacon of innovation in the automotive sector, paving the way for a future where fewer vehicles are scrapped, and more people can enjoy the benefits of electric driving. Our founding mission continues to inspire efforts to create a greener, more sustainable urban environment. 

Scalable Electric Vehicle Conversion

ABO ELECTRONICS (SHENZHEN) CO LTD

100W~4000W, customized product design Service Scope ODM: Include Mechanical design, PCB Layout, Firmware development, APP development and OS development services. OEM: Include component sourcing and procurement, PCB Fabrication, PCB Assembly, Build of Box Assembly, Function Testing, Aging Testing, Packing and Logistic Services. DFM(Design For Manufacturing): Feed back customer of circuit layout optimization and component performance optimization requirements. DFP(Design For Purchasing): Recommend price competitive equivalent or better quality equivalent components. DFT(Design For Testing): Recommend price competitive testing solution for “high mix, low volume” projects or ATE(Auto-Testing-Equipment) solution for big volume projects.  Product Testing&amp; InspectionTest Development Services In-circuit Test Function Test Flying Probe Burn In &amp; Environment Stress Screening AOI Test Automated Test Platform Solutions X-Ray inspection PCBA ProductionLow Volume / High Mix Production High-Volume Production Customized Fulfillment Planning &amp; Options Total Quality ManagementISO 9001:2015Certified ISO 13485:2016Certified RoHS Compliant Compliant to IPC-A-610 Workmanship Standards UL, CE/FCC, CSAetcCertification Support Supply Chain ManagementDomestic &amp; International Sourcing Long-Term Collaborative Supplier Relationships Inventory Management Systems Strict Counterfeit Prevention Policy Kanban Manufacturing Programs 

Portable Power Station

Surface Mount Technology Ltd

 Our research and development service focuses on switching-mode power and micro controller. We produce standard-design products with high quality, function, and precision. We also engage in providing tailor-designed electronic solutions and upgrade of OEM products. 
 
  Structured systems for great efficiency. 
  With advanced facilities and equipments. 
 

Research and Development

GRG METROLOGY & TEST GROUP CO., LTD.

GRGTEST has been deeply involved in the automotive field and has established a complete industrial chain testing and verification capability from materials to complete vehicles. Focusing on the technological evolution requirements of intelligent connected and new energy vehicles, GRGTESTcontinuously improves its core testing capabilities to ensure the technological iteration and product innovation of industry enterprises. 

Vehicle-mounted Electronic Product Testing

Svi Public Co Ltd

We provide fully turn-key solutions that integrate innovative EMS products with quality manufacturing. Our industry focus includes industrial products, high end telecommunications, office automation, professional audio and video products, automotive electronics, medical devices, etc. The advanced solutions are sure to keep you on the cutting edge.
 
  Covering a wide industry. 
  Experienced in this field. 
 

EMS Turn-Key

Chun Yang International (HK) Company Limited

Hong Kong's first EV battery processing plant To provide sustainable solutions for retired EV batteries in Hong Kong, Chun Yang is building the first EV battery processing plant in Hong Kong. The processing plant will provide cascade utilization (second life application) and direct recycling solutions for the retired EV batteries. 

Sustainable Solutions for EV battery

NINESMART LIMITED

Smart Residence is an IoT solution for residential buildings. It leverages our own IoT Hub to connect commonly used facilities with network. Residents can use the mobile app to control facilities like the door at main entrance, their mailboxes, elevators, and provide managed access to visitors at their fingertips. Solution introduction:https://ninesmart.io/smart-residence/ 

Smart Residence (IoT Solution for Residential Building)

ATR Manufacturing Ltd

We provide EMS solution. Our service includes OEM, OBM and ODM manufacturing. Our product experience includes Medical and Healthcare Equipment, Electric Appliance Control Units, Hospital Equipment, Temperature Monitoring Devices, Deodorizer, Light Tube, Safety and Security Equipment, Assistive Hearing Devices, Communication Equipment, Pest Control Units, Currency Handling Devices and PCB Assemblies. Our existing manufacturing plant is in Dongguan, China. We will have a new plant in Vietnam starting for Production by January 2020 at Phase-1; the Phase-2 facilities will be scheduled completion by end 2020.

OEM / ODM / EMS Manufacturing

The Hong Kong Standards And Testing Centre Ltd (STC)

STC’s product safety testing services covers LVD testing to assist manufacturers in meeting CE Mark requirements.    The LVD covers health and safety risks on electrical products operating with an input or output voltage of between: 50 and 1000 V for alternating current75 and 1500 V for direct currentIt applies to a wide range of electrical equipment including:Household Electrical Appliances(e.g. coffee machines, refrigerators, microwave ovens, etc.)AV Products(e.g. TV sets, radios, video players, etc.)Luminary (Lighting) ProductsIT &amp; Office EquipmentCablesPower Supply UnitsLaser EquipmentElectrical Accessories &amp; certain components(e.g. fuses)Common Electrical Safety Testing Although commonly referred to as electrical safety testing, the actual assessments carried out extend well beyond a product’s electrical characteristics and includes: Electric Shock Hazards TestingEnergy Related Hazards TestingFlammability TestingHeat Related Hazards TestingMechanical Hazards TestingRadiation TestingChemical Hazards TestingAbnormal Operation Testing(faults and failures within the equipment)If you have any further question, please feel free contact us or visit our website: https://www.stc.group/en/contact To know more or enquire any specific service, please visit https://www.stc.group and fill in our enquiry form on https: www.stc.group/contact. 

Low Voltage Directive (LVD) Testing

Electronic Manufacturing Service
Our industry focus includes industrial products, high end telecommunications, office automation, professional audio and video products, automotive electronics, medical devices, etc. The advanced solutions are sure to keep you on the cutting edge.

Electronic Manufacturing Service

Microtech Technology Co Ltd

PCB Design Service
Electronic Design Service
Mechanical Design Service

PCB Design Service

V-Trust Inspection Service Co., Ltd

Extensive Expertise in the Battery Industry  V-Trust's inspection services for batteries provide essential support to buyers, ensuring that products meet both customer specifications and quality standards.  Whether it’s a batch of lithium-ion, alkaline, nickel-metal hydride, or other battery types, the V-Trust inspection process involves a comprehensive assessment of product integrity, appearance, and build quality to ensure there are no defects, such as leaks, scratches, or swelling. Functionality checks include capacity testing, charge and discharge cycles, voltage consistency, and thermal stability to verify performance and safety.  V-Trust helps buyers minimize risks and avoid costly issues by providing detailed inspection reports with photographic evidence, available within 6 to 24 hours after the inspection.  Why V-Trust  ✔ Full-Time Inspectors Only: We do not hire part-time QC staff or outsource to other firms. This approach serves as a key anti-bribery measure and ensures the highest level of reliability in our inspection reports. ✔ Diverse Product Range: Our team covers a wide range of product categories, including electronics, electrical products, lighting, building materials, furniture, home décor, kitchenware, textiles, apparel, and industrial goods. ✔ 2,500+ Checklists: We offer comprehensive checklists for various product lines, drawing on our extensive QC experience. ✔ Online Booking: Easily book services through our advanced online system, and access inspection results and supply chain statistics via the QC dashboard. ✔ Quick and Efficient Service: Receive same-day quotations, with reports available 6 to 24 hours after inspection. We also offer free laboratory testing and regulatory consultations.  About V-Trust  V-Trust is the largest product inspection company in Asia, employing only full-time inspectors. With over 600 staff across 10 Asian countries, we conduct more than 110,000 inspections and audits annually, serving over 13,000 buyers worldwide.  We are experts in the quality control industry, offering a wide range of cost-effective services, including product inspections, factory audits, laboratory testing, and product certification.  V-Trust operates in China and key export markets such as India, Vietnam, Malaysia, Thailand, Bangladesh, Pakistan, Cambodia, Indonesia, and Myanmar.  For more information, please contact us:Website: www.v-trust.comEmail: cs@v-trust.com 

Battery Product Inspection

Unitronics Company Limited

We provide our electronic manufacturing services (EMS) to various industries. In PCB Assembly, we utilize most assembly technologies, including Thru-Hole axial/radial assembly and SMT assembly. Our manufacturing stage supports services like small batches (samples), pilot runs, mass production, and logistics management.  PCB Design for Manufacture and Assembly (DFMA)Design for testability (DFT)Quality and TestingLogistics management

Manufacturing Capabilities & Support Services (EMS)

Eurofins MTS Consumer Product Testing Hong Kong Limited  

 	 Examples of electrical and electronic products we test include, but not limited to: Luminaires (IEC/EN 60598, IEC/EN 61347) AV Equipment (IEC/EN 60065) Household Appliance (IEC/EN 60335) Office Equipment / IT Products / Transformer (IEC/EN 60950, IEC/EN 61558) Electrical Power Tools (IEC/EN 60745) Electrical Toy (IEC/EN 62115) Power Bank (UN 38.3, IEC/EN 62133)&nbsp; 	 MTS is capable to perform a wide range of electrical and electronic testings, including: Industry and regulatory standard Safety) Chemical RoHS Compliance Durability and life / climatic tests Energy Efficiency (ErP / Energy Star / CEC) Reliability and Performance Comparative Product Testing  

Electronics & Electrical Testing

Bureau Veritas HK Ltd

  Art and Craft Toys  Battery Operated Toys  Carriage & Stroller  Electrically Operated Toys  Food Contact Plastic Toys  High Chair  Liquid   Filled Toys  Metal Omament & Fashion Accessories  Pacifiers  Playyard  Stuffed Toys  Toy Cosmetics  Toy Sunglasses  

EMC Testing for Battery-operated Toys

HONGKONG YILAW INSPECTION AND TESTING TECHNOLOGY CO., LIMITED

During Production Inspection (DuPro) For Electrical &amp; Electronic ProductMonitor ongoing production to detect issues early and maintain product quality. Service Highlights Conduct in-line checks on partially finished goods Review production progress, defect rates, and rework status Verify adherence to specifications and quality standards Monitor corrective actions and process controls Provide regular reports with findings and recommendations Why Choose ECQA Experienced inspectors across key sourcing regions Standardized inspection procedures for consistency and reliability Transparent inspection reports with photos, checklists, and defect trends Flexible scheduling during production phases About ECQAECQA is a third-party inspection and quality control service provider operating across Asia, Europe, and other major global manufacturing hubs. We offer product inspections, factory audits, testing, and certification to ensure quality and compliance. Book DuPro Inspection TodayDetect problems before they escalate. Contact us for a quotation. 

DuPro For Electrical & Electronic Product

BIG PICTURES

 	 Operate For Beginner of Construction Machinery, Mobile HMD VR Simulator.&nbsp; 	 You can easily practice every day, everywhere with mobile application.&nbsp; 	 PC Simulator Hardware.&nbsp; 	 You can feel handling like real with joystick and pedal.  

BIGpictures

TUV Rheinland HK Ltd

  Product Example     Small household appliances: all-purpose cutting tools, hand-mixer   Steaming appliances: coffee machines, toasters, grills   Skincare appliances: electric toothbrushes, hairdryers   Household cleaning appliances: steam irons, steam cleaners, vacuum cleaners   Large kitchen appliances: ovens, microwaves, refrigerators, air conditioning  

Electrical Household Appliance Testing

Nemko Hong Kong Limited

Nemko offer expert testing various electrical vehicle charging connector, inlet and socket according to standards IEC 61296 series, and issue CB, and N mark certificate to demonstrate compliance.  

Testing of ELVH charging connector

Swiss Grandstone Watch Industry (Hongkong) Co., Ltd.

 	 we design and producing rotors (Masse oscillante) according to clients&#39; personality design.  

Rotor Design & Producing

Hanhong Digital Technology Co., Limited

With the talented in house designer and the strongest R&amp;D team which leads Hanhong to create the unique and excellent products to worldwide clients, all of our products have our private toolings with design patented, we are expert in making some difference whether on the designs or the acoustic technology so as to bring the good branding value for our customers. Also we have strongest R&amp;D team including the electronic engineers, mechanical engineers, acoustic engineer and software developing engineers who assure the enough capacity of doing customized ODM projects with our customers. 

OEM / ODM FACTORY

Wide Expertise in the Power Tools Industry  V-Trust's inspection services for power tools provide invaluable support to buyers, ensuring that products comply with safety requirements and quality standards.  By detecting potential defects, electrical issues, and performance problems before products are released to the market, V-Trust helps buyers minimize risks and avoid costly issues.  Detailed inspection reports with photographic evidence available within 6 to 24 hours after inspection.  Why V-Trust  ✔ Full-Time Inspectors Only: We do not hire part-time QC staff or outsource to other firms. This approach serves as a key anti-bribery measure and ensures the highest level of reliability in our inspection reports. ✔ Diverse Product Range: Our team covers a wide range of product categories, including electronics, electrical products, lighting, building materials, furniture, home décor, kitchenware, textiles, apparel, and industrial goods. ✔ 2,500+ Checklists: We offer comprehensive checklists for various product lines, drawing on our extensive QC experience. ✔ Online Booking: Easily book services through our advanced online system, and access inspection results and supply chain statistics via the QC dashboard. ✔ Quick and Efficient Service: Receive same-day quotations, with reports available 6 to 24 hours after inspection. We also offer free laboratory testing and regulatory consultations.  About V-Trust  V-Trust is the largest product inspection company in Asia, employing only full-time inspectors. With over 600 staff across 10 Asian countries, we conduct more than 110,000 inspections and audits annually, serving over 13,000 buyers worldwide.  We are experts in the quality control industry, offering a wide range of cost-effective services, including product inspections, factory audits, laboratory testing, and product certification.  V-Trust operates in China and key export markets such as India, Vietnam, Malaysia, Thailand, Bangladesh, Pakistan, Cambodia, Indonesia, and Myanmar.  For more information, please contact us:Website: www.v-trust.com 

Power Tools Product Inspection

Sport Products Testing - Bike Testing STC is one of few testing laboratories accredited by Consumer Product Safety Commission (CPSC) &amp; China National Accreditation Service (CNAS) to perform bike testing and helmet testing under regulations 16 CFR 1512 and other national standards.  Our Bike Testing services include: Children’s Bike Testing Standards America (16 CFR 1512)China (GB 14746, ISO 8098)Europe (EN 14765, ISO 8098)Children’s Bike Testing Brake / Steering TestingSaddles / Seat-pillars TestingFrames and Front Fork Assembly TestingPedals TestingRims, Tires &amp; Tube TestingIf you have any further question, please feel free contact us or visit our website: https://www.stc.group/en/services/detail/sporting-goods  To know more or enquire any specific service, please visit https://www.stc.group and fill in our enquiry form on https: www.stc.group/contact. 

My Sourcing