REC Green Technologies Co., Ltd.

iFCU™ has successfully attained the Platinum recognition in CIC Green Product Certification.iFCU™adopted the patented technology with rotor of a permanent magnet to generate magnetic flux. Its advantages are to eliminate the source of power loss and achieve a high energy efficient operation.By replacing mechanical brushes, permanent magnet motor can also minimize the noise level and waste heat generation, thus improves motor lifespan.With variable speed drive, the motor further enhances efficiency system compared to traditional fixed speed AC motor designs.Major Features:Variable speed FCU fully controllable “AUTO” mode is available in iFCU™, stepless variable fan speed is controlled based on room temperature set point. Reduce energy use while maintaining comfortable condition, e.g. unoccupied mode to maintain the minimal RPM and energy ussage. Programme Customization to fit client’s application/configuration Tailor-made programme to work with different system and fit the occasions requirements. Modbus Thermostat, Room control unit (0-10V), Group Control, RPM adjustment &amp; wireless group control etc. Duct type sensor Installed in return-air box to control temperature accuracy up to ± 0.5oC to increase human comfort. Both high &amp; low static Applicable to both high &amp; low static pressure setting. Wi-Fi Control Can be controlled through any mobile device. 

iFCU™ Intelligent Fan Coil Unit (EC Motor / BLDC Motor / PM Motor)

Refined Motor Company Limited

Refined Motor Co. was born out of a pressing need to address the alarming rate of vehicle scrappage across the globe, driven by the rapid rise of electric vehicles. Founded by a group of engineers, the company set out to create a sustainable solution that would not only reduce waste but also promote the adoption of clean energy transportation.The company, witnessing the increasing number of traditional gasoline vehicles being discarded as more consumers opted for electric counterparts, recognized a unique opportunity. We believe that many existing vehicles still had significant potential and could be transformed into electric ones, thereby extending their lifespan and reducing environmental impact.Starting from a modest workshop, the team focused on developing an innovative conversion solution that could be optimize the conversion process. Our goal was to make the conversion process fast, accessible and affordable, allowing car owners to embrace electric mobility without the need to purchase entirely new vehicles.Refined Motor Co. rapidly gained traction by demonstrating the benefits of their conversions, including lower operating costs, reduced emissions, and improved performance. They partnered with leading institutions and automotive experts to promote awareness about the advantages of vehicle electrification.Today, Refined Motor Co. stands as a beacon of innovation in the automotive sector, paving the way for a future where fewer vehicles are scrapped, and more people can enjoy the benefits of electric driving. Our founding mission continues to inspire efforts to create a greener, more sustainable urban environment. 

Scalable Electric Vehicle Conversion

Svi Public Co Ltd

We provide fully turn-key solutions that integrate innovative EMS products with quality manufacturing. Our industry focus includes industrial products, high end telecommunications, office automation, professional audio and video products, automotive electronics, medical devices, etc. The advanced solutions are sure to keep you on the cutting edge.
 
  Covering a wide industry. 
  Experienced in this field. 
 

EMS Turn-Key

GRG METROLOGY & TEST GROUP CO., LTD.

GRGTEST has been deeply involved in the automotive field and has established a complete industrial chain testing and verification capability from materials to complete vehicles. Focusing on the technological evolution requirements of intelligent connected and new energy vehicles, GRGTESTcontinuously improves its core testing capabilities to ensure the technological iteration and product innovation of industry enterprises. 

Vehicle-mounted Electronic Product Testing

Chun Yang International (HK) Company Limited

Hong Kong's first EV battery processing plant To provide sustainable solutions for retired EV batteries in Hong Kong, Chun Yang is building the first EV battery processing plant in Hong Kong. The processing plant will provide cascade utilization (second life application) and direct recycling solutions for the retired EV batteries. 

Sustainable Solutions for EV battery

TUV Rheinland HK Ltd

Our company produces, tests and certifies&nbsp;a wide spectrum of&nbsp;electrical and electronic products including electrical household appliances, power tools, garden tools, audio and video equipments, office equipments, laser products, electronic components, and luminaries.&nbsp;With your best interests at heart,&nbsp;our products strictly&nbsp;comply&nbsp;with high quality and safety standards. 	 Excellent craftsmanship. 	 OEM is welcome.  

Electrical and Electronic Products

V-Trust Inspection Service Co., Ltd

Wide Expertise in the Home Appliances Industry  V-Trust's inspection services for home appliances provide invaluable support to buyers, ensuring that products comply with safety requirements and quality standards.  By identifying potential defects, electrical hazards, and performance issues before products reach the market, V-Trust helps buyers mitigate risks and avoid costly problems.  Detailed inspection reports with photographic evidence available within 6 to 24 hours after inspection.  Why V-Trust  ✔ Full-Time Inspectors Only: We do not hire part-time QC staff or outsource to other firms. This approach serves as a key anti-bribery measure and ensures the highest level of reliability in our inspection reports. ✔ Diverse Product Range: Our team covers a wide range of product categories, including electronics, electrical products, lighting, building materials, furniture, home décor, kitchenware, textiles, apparel, and industrial goods. ✔ 2,500+ Checklists: We offer comprehensive checklists for various product lines, drawing on our extensive QC experience. ✔ Online Booking: Easily book services through our advanced online system, and access inspection results and supply chain statistics via the QC dashboard. ✔ Quick and Efficient Service: Receive same-day quotations, with reports available 6 to 24 hours after inspection. We also offer free laboratory testing and regulatory consultations.  About V-Trust  V-Trust is the largest product inspection company in Asia, employing only full-time inspectors. With over 600 staff across 10 Asian countries, we conduct more than 110,000 inspections and audits annually, serving over 13,000 buyers worldwide.  We are experts in the quality control industry, offering a wide range of cost-effective services, including product inspections, factory audits, laboratory testing, and product certification.  V-Trust operates in China and key export markets such as India, Vietnam, Malaysia, Thailand, Bangladesh, Pakistan, Cambodia, Indonesia, and Myanmar.  For more information, please contact us:Website: www.v-trust.com 

Home Appliances Product Inspection

RGT’s IoT (Internet of Things) is low power operation, wide coverage, and capable to integrate with various devices / sensors. It is a direct, simple and cost-effective solution for various remote monitoring applications, with the real-time notifications and web platform which can be achieved management goals. e.g. enhance sustainability efforts, energy efficiency and remote control in rural area and so on.   

Internet of Things (IoT) Solutions for Monitoring and Control 

Electronic Manufacturing Service
Our industry focus includes industrial products, high end telecommunications, office automation, professional audio and video products, automotive electronics, medical devices, etc. The advanced solutions are sure to keep you on the cutting edge.

Electronic Manufacturing Service

  Product Example     Small household appliances: all-purpose cutting tools, hand-mixer   Steaming appliances: coffee machines, toasters, grills   Skincare appliances: electric toothbrushes, hairdryers   Household cleaning appliances: steam irons, steam cleaners, vacuum cleaners   Large kitchen appliances: ovens, microwaves, refrigerators, air conditioning  

Electrical Household Appliance Testing

Eurofins MTS Consumer Product Testing Hong Kong Limited  

 	 Examples of electrical and electronic products we test include, but not limited to: Luminaires (IEC/EN 60598, IEC/EN 61347) AV Equipment (IEC/EN 60065) Household Appliance (IEC/EN 60335) Office Equipment / IT Products / Transformer (IEC/EN 60950, IEC/EN 61558) Electrical Power Tools (IEC/EN 60745) Electrical Toy (IEC/EN 62115) Power Bank (UN 38.3, IEC/EN 62133)&nbsp; 	 MTS is capable to perform a wide range of electrical and electronic testings, including: Industry and regulatory standard Safety) Chemical RoHS Compliance Durability and life / climatic tests Energy Efficiency (ErP / Energy Star / CEC) Reliability and Performance Comparative Product Testing  

Electronics & Electrical Testing

Wide Expertise in the Power Tools Industry  V-Trust's inspection services for power tools provide invaluable support to buyers, ensuring that products comply with safety requirements and quality standards.  By detecting potential defects, electrical issues, and performance problems before products are released to the market, V-Trust helps buyers minimize risks and avoid costly issues.  Detailed inspection reports with photographic evidence available within 6 to 24 hours after inspection.  Why V-Trust  ✔ Full-Time Inspectors Only: We do not hire part-time QC staff or outsource to other firms. This approach serves as a key anti-bribery measure and ensures the highest level of reliability in our inspection reports. ✔ Diverse Product Range: Our team covers a wide range of product categories, including electronics, electrical products, lighting, building materials, furniture, home décor, kitchenware, textiles, apparel, and industrial goods. ✔ 2,500+ Checklists: We offer comprehensive checklists for various product lines, drawing on our extensive QC experience. ✔ Online Booking: Easily book services through our advanced online system, and access inspection results and supply chain statistics via the QC dashboard. ✔ Quick and Efficient Service: Receive same-day quotations, with reports available 6 to 24 hours after inspection. We also offer free laboratory testing and regulatory consultations.  About V-Trust  V-Trust is the largest product inspection company in Asia, employing only full-time inspectors. With over 600 staff across 10 Asian countries, we conduct more than 110,000 inspections and audits annually, serving over 13,000 buyers worldwide.  We are experts in the quality control industry, offering a wide range of cost-effective services, including product inspections, factory audits, laboratory testing, and product certification.  V-Trust operates in China and key export markets such as India, Vietnam, Malaysia, Thailand, Bangladesh, Pakistan, Cambodia, Indonesia, and Myanmar.  For more information, please contact us:Website: www.v-trust.com 

Power Tools Product Inspection

NINESMART LIMITED

Smart Residence is an IoT solution for residential buildings. It leverages our own IoT Hub to connect commonly used facilities with network. Residents can use the mobile app to control facilities like the door at main entrance, their mailboxes, elevators, and provide managed access to visitors at their fingertips. Solution introduction:https://ninesmart.io/smart-residence/ 

Smart Residence (IoT Solution for Residential Building)

SGS HK Ltd

Developing the highest quality electrical and electronic (E&amp;E) goods that are safe and energy efficient is a complex challenge in today’s competitive market. Our holistic Total Solution Services for E&amp;E products, delivered through our global network of accredited testing laboratories, ensure manufacturers and retailers have access to expert support at every stage of the product life cycle – from design, production and regulatory compliance to the import and export of goods. Our services include:   We understand regulations and standards for every product and target market, and we can help you reduce risk, improve efficiency and ensure compliance. Our experts can help you to incorporate critical construction criteria and compliance requirements from the design stage to the end of the product life cycle. Our Total Solution Services enhance market access and encourage growth. 

Electrical & Electronic Products: Total Solution Services

Hydrogen has the potential to supply our future energy needs. That's why we are committed to contributing to a future that meets the needs of both people and the environment in a sustainable way. And that's why we are supporting the development of hydrogen as the energy carrier of the future. When the foray into not yet fully developed areas, and a lack of regulations, guidelines and experience can make it difficult to gain a foothold in the hydrogen economy. We support you with a comprehensive package of integrated services that includes testing, inspection, training and consulting. Our expertise will help you to manage the risks to people, plants, businesses and the environment and to create safe operating conditions. The path to a sustainable hydrogen economy has its challenges, but it's worth it. Let's walk it together. 

Green Hydrogen - An energy carrier with potential.

Surface Mount Technology Ltd

 Our research and development service focuses on switching-mode power and micro controller. We produce standard-design products with high quality, function, and precision. We also engage in providing tailor-designed electronic solutions and upgrade of OEM products. 
 
  Structured systems for great efficiency. 
  With advanced facilities and equipments. 
 

Research and Development

Leading global provider of full turnkey box-build contract electronics manufacturing and design services to the industrial and professional electronics sectors. We have 4 factories located in Thailand, Austria, Slovakia and Hungary with 3,300 employees. 	 Industrial 	 Automotive 	 Telecommunication 	 Medical 	 Audio/video 	 etc.,  

EMS Electronic Manufacturing Services

Great O'Bay Limited

Advanced Electroplating Production Technology  The group's production facilities are located in Foshan and Qingyuan, Guangdong Province, China, focusing on providing exceptional services throughout Asia. Our plants utilize advanced Electroplating production technologies, ensuring high product quality and low carbon emissions. We are dedicated to the innovative application of recycled metal materials, transforming these materials into high-performance products. By closely integrating research and development with production, we effectively advance the implementation of green technology solutions, promoting sustainable development.  With 30 years of experience in manufacturing parts across the automotive, electrical, and furniture sectors, we are committed to providing environmentally friendly, durable, and competitively valued solutions for automobile parts, electronic products, and furniture through continuous innovation and the implementation of green manufacturing processes.  We hold multiple professional certifications, including pollutant discharge permits, ISO 9001:2015 Quality Management System Certification, IATF 16949 Automotive Quality Management System Certification, ISO 14001 Environmental Management System Certification, and various utility model and invention patents.  We collaborate with several well-known brands, including GAC, Honda, Toyota, Volkswagen, Mitsubishi, Fiat, as well as Midea and Galanz. The professionalism and technical strength of our group enable us to successfully apply innovative recycled metal materials across various industries, including aluminum alloys, stainless steel, nickel, and copper. These materials effectively replace traditional new materials, lowering manufacturing costs while enhancing product performance and environmental sustainability.  

Advanced Electroplating Production Technology

Examples of electrical and electronic products we test include, but not limited to: 	 Luminaires (IEC/EN 60598, IEC/EN 61347) 	 AV Equipment (IEC/EN 60065) 	 Household Appliance (IEC/EN 60335) 	 Office Equipment / IT Products / Transformer (IEC/EN 60950, IEC/EN 61558) 	 Electrical Power Tools (IEC/EN 60745) 	 Electrical Toy (IEC/EN 62115) 	 Power Bank (UN 38.3, IEC/EN 62133)  &nbsp;
MTS is capable to perform a wide range of electrical and electronic testings, including: 	 Industry and regulatory standard (Safety) 	 Chemical &ndash; RoHS Compliance 	 Durability and life / climatic tests 	 Energy Efficiency (ErP / Energy Star / CEC) 	 Reliability &amp; Performance 	 Comparative Product Testing  

Electrical & Electronics Testing

Unitronics Company Limited

We provide our electronic manufacturing services (EMS) to various industries. In PCB Assembly, we utilize most assembly technologies, including Thru-Hole axial/radial assembly and SMT assembly. Our manufacturing stage supports services like small batches (samples), pilot runs, mass production, and logistics management.  PCB Design for Manufacture and Assembly (DFMA)Design for testability (DFT)Quality and TestingLogistics management

Manufacturing Capabilities & Support Services (EMS)

Nemko Hong Kong Limited

Nemko offer safety testing and certification of various types of vehicle charging connector, inlets, and socket outlet, ensure they comply with the standards IEC 62196 series. 

Testing of Vehicle connectors, inclets and socket outlet

The Hong Kong Standards And Testing Centre Ltd (STC)

Product Performance Testing LED Luminaires / Light Bulbs / Light Tubes / BallastsCFL Light Bulbs / Light TubesElectric Rice CookersElectric Induction CookersMicrowave OvensElectric Water Storage HeatersTelevisions SetsPhotocopiersBattery ChargersExternal Power SuppliesIngress Protection (IP) TestingIf you have any further question, please feel free contact us or visit our website: https://www.stc.group/en/contact To know more or enquire any specific service, please visit https://www.stc.group and fill in our enquiry form on https: www.stc.group/contact. 

Electrical and Electronics Product Performance Testing

Unlike other inspection companies who outsource, V-Trust has our own in-house electrical and electronics labs in Dongguan city, Guangdong province. It is accredited by most international authoritative bodies, inducing CNAS, EMCC, FCC, CPSC, IC &amp; CEC, etc.&nbsp;

We can provide various qualification testing services, including safety, EMC and chemical &amp; physical testing, and other certification services for a wide range of products, including home appliances, lamps &amp; lightings, audio &amp; video apparatuses, toys, textiles &amp; footwear, hardline products, furnitures, food contact products, etc.&nbsp;

Working with V-Trust makes it workable to integrate your laboratory testing with shipment inspection, to get the strictest quality control from the beginning to the end, and to guarantee the tested sample is from your production lot, not specially prepared by factory.&nbsp;

V-Trust Testing Service can bring you the following values:&nbsp;


Quick Response

- Quotation within&nbsp;24&nbsp;hours

- Test report within&nbsp;2~6&nbsp;working days

-&nbsp;Free&nbsp;testing consultancy

Free&nbsp;Sample Picking from Product Inspection
Saving over&nbsp;30%&nbsp;testing cost vs. other labs
Exclusive&nbsp;Account Manager&nbsp;
Accreditation by over&nbsp;50&nbsp;western countries

EMC Testing

ALBA Integrated Waste Solutions (Hong Kong) Limited

The Hong Kong Government entered into a contract with ALBA IWS to design and build the city&#39;s first Waste Electrical and Electronic Equipment Treatment and Recycling Facility-WEEE Park, provide collection services, and operate the facility until 2027.&nbsp; 	 The facility will use German technology offering exceptional recycling rates to process refrigerators, TVs, computers, washing machines and air conditioners into valuable secondary raw materials including aluminums, metals and plastics, while carefully managing hazardous materials found in the appliances. 	 Sorting different materials from e-waste&nbsp;  

My Sourcing