The Hong Kong Standards And Testing Centre Ltd (STC)

All electrical and electronic products that manufacturers plan to sell in the United States must comply and meet relevant RF and EMC requirements under the&nbsp;Federal Communications Commission (FCC).

FCC&nbsp;testing and authorization involves two approval procedures - &#39;Certification&#39;&nbsp;and &#39;Supplier&rsquo;s Declaration of Conformity (SDoC)&#39;.

The approval procedure required to be used is specified in the applicable&nbsp;FCC&nbsp;rule part(s) that apply to the radio frequency functions of a device or an end product. In general, except when otherwise stated in a rule, intentional radiators(transmitters) arerequired to be approved using the certification procedure,and unintentional radiators (e.g.digital circuitry) are approved using the&nbsp;SDoC&nbsp;procedure.

STC&rsquo;s technical competence meets&nbsp;FCC&nbsp;requirements for various scopes of accreditation for testing performed in support of&nbsp;SDoC&nbsp;and Certification.

  FCC Recognized Accredited Scope   	 Unintentional Radiators&nbsp;(FCC Part15 Subpart B) 	 Intentional Radiators&nbsp;(FCC Part 15 Subpart C) 	 U-NII without DFS Intentional Radiators&nbsp;(FCC Part 15 Subpart E) 	 UWB Intentional Radiators&nbsp;(FCC Part 15 Subpart F) 	 White Space Device Intentional Radiators&nbsp;(FCC Part 15 Subpart H) 	 Industrial, Scientific, and Medical Equipment&nbsp;(FCC Part 18)  If you have any further question, please feel free contact us at&nbsp; enquiry@stc.group &nbsp;or visit our website:&nbsp; https://www.stc.group/en/contact 

FCC Testing

Nemko Hong Kong Limited

TCB Certification processCertification is based on review of test results, technical design documentation and administrative attestations. Guidelines for preparation of these applications and on how to work with Nemko TCB can be downloaded from the links below. The TCB will: Review applications and provide prompt feedbackExplain the rules and regulationsIssue the certifications for compliant productRegister certifications with the regulatory authorities

TCB FCC certification 

San-Byte Creative Japan Co., Ltd

Fuchico on the cup

Surface Mount Technology Ltd

 This high-tech machine is designed for advanced pick-and-place and bonding technology. It supports chip mount&nbsp;with the minimum size of 0201 and IC mount with fine pitch in 0.3mm of QFP. The BGA or micro BGA has a diameter of 0.4mm with a 0.8mm pitch or a diameter of 0.3mm ball with 0.5mm pitch CSP. 
 
  Flip Chip Bonding: ACF, C4 and C5 Technology. 
  Aluminum wire bonding. 
 

Pick-and-Place and Bonding Technology

Diamond Federation of HK, China Ltd

Diamond Federation of Hong Kong (DFHK) is a non-profit organization aims to protect the integrity of diamond and consumer&rsquo;s interest by standardizing business practice. 	 A joined force of two long-established associations in Hong Kong 	 Has undertaken their missions in maintaining Hong Kong&rsquo;s reputation as the diamond center in Asia 	 Promoting quality services and consumer rights 	 Integrity Pledge Scheme was launched to ensure an ethnical and professional image of our members  

Diamond Federation of Hong Kong, China Ltd.

Nemko offer Tupe C testing according to IEC 62680-1-3 and IEC 62680-1-2, to help you show compliance to the EU requirement under RED directive article 3.4 and SASO requirement. 

Common Charger Type C testing 

Amontre (Asia) Watch Industry Co., Ltd.

SOURCING ENGINEERING SUPPORT  Amontre bridges the gap between creative vision and technical reality.Design drawing feasibility analysis (water/shock resistance structural adaptation).Prototype trial production &amp; tolerance calibration based on your 2D/3D/STL files. 

OEM ENGINEERING & MANUFATURING SUPPORT

Asian Gemmological Institute And Laboratory Limited

  Gemology courses provided by Asian Gemmological Institute And Laboratory Limited  These include introduction to gemmology, jewellery design, manufacturing courses etc  We offer British FGA gemmology diploma courses  

Gemmology Courses

HONGKONG YILAW INSPECTION AND TESTING TECHNOLOGY CO., LIMITED

FCC (US)Ensure your electronic products meet U.S. Federal Communications Commission requirements before entering the market. Service Highlights Identify applicable FCC rules for electronic and wireless products Conduct electromagnetic interference (EMI) and radiofrequency (RF) testing Prepare and review technical documents, test reports, and labeling Manage certification submission to FCC-recognized bodies Reduce risk of border rejections or costly recalls Why Choose ECQA Specialists in U.S. regulatory compliance and documentation Partnership with accredited FCC-recognized testing laboratories Detailed guidance on labeling, documentation, and certification workflows Streamlined coordination for faster market entry About ECQAECQA is a third-party inspection and quality control service provider operating across Asia, Europe, and other major global manufacturing hubs. We offer product inspections, factory audits, testing, and certification to ensure quality and compliance. Book FCC Certification Services TodayAchieve FCC compliance and enter the U.S. market with confidence. Contact us for a quotation. 

FCC (US)

e-health therapy limited

Enhanced External Counterpulsation (EECP) is a non-invasive, outpatient treatment for chronic stable angina that FDA-approved to improve blood flow to the heart. It uses pressure cuffs on the legs to act as a "natural bypass," boosting coronary blood flow during rest. Treatment typically involves 35 one-hour sessions over 7 weeks.   

Enhanced External Counterpulsation (EECP) for 45min treatment

XTransfer Limited

Access market-beating exchange rates and easy FX management anytime, anywhere.  

Currency Exchange

CW Business Services Limited

CW Business Services Limited's China consultancy team is well-versed in helping foreign companies to establish their presence in China. They carefully examine business plans and help choose the proper organizational form, define the appropriate business scope, corporate governance structure, registered capital and avoid common pitfalls.  Setting up a foreign-invested enterprise (FIE) in China: Entry model, location selection, and business structure analysis.Advisory on the notarization and legalization process for the certificate of the shareholding company.Guidance on Chinese company name, registered capital, business scope, management structure, etc.Completion of government forms required for the company set-up.Collection of business licenses and company chops.Assistance in opening corporate bank accounts. Auxiliary services related to setting up a company in China: Search of a business office based on your budget expectation and government requirements.Assist in the negotiation with the property owner and the signing of the office rental agreement.Translation of documents in foreign languages.Introduction of potential business partners within our network to help you develop your business.

Foreign-Invested Enterprise Establishment in China

REC Green Technologies Co., Ltd.

iFCU™ has successfully attained the Platinum recognition in CIC Green Product Certification.iFCU™adopted the patented technology with rotor of a permanent magnet to generate magnetic flux. Its advantages are to eliminate the source of power loss and achieve a high energy efficient operation.By replacing mechanical brushes, permanent magnet motor can also minimize the noise level and waste heat generation, thus improves motor lifespan.With variable speed drive, the motor further enhances efficiency system compared to traditional fixed speed AC motor designs.Major Features:Variable speed FCU fully controllable “AUTO” mode is available in iFCU™, stepless variable fan speed is controlled based on room temperature set point. Reduce energy use while maintaining comfortable condition, e.g. unoccupied mode to maintain the minimal RPM and energy ussage. Programme Customization to fit client’s application/configuration Tailor-made programme to work with different system and fit the occasions requirements. Modbus Thermostat, Room control unit (0-10V), Group Control, RPM adjustment &amp; wireless group control etc. Duct type sensor Installed in return-air box to control temperature accuracy up to ± 0.5oC to increase human comfort. Both high &amp; low static Applicable to both high &amp; low static pressure setting. Wi-Fi Control Can be controlled through any mobile device. 

iFCU™ Intelligent Fan Coil Unit (EC Motor / BLDC Motor / PM Motor)

This is the material for the DGA gemmological diploma course. The course we organized is a gem diamond diploma originated from England. We have translated the whole set of lecture notes into Chinese version for the better absorption of the course takers. 	 Original notes in English version available 	 Also the translated Chinese version 	 Takers can accquire the DGA diploma level in Hong Kong  

DGA Gemmological Diploma Course

We offer radio frequency and electromagnetic testing services for customers. We use high-quality equipment to test and provide precision results. Our services are professional and reliable. Providing technical support services.Assist and strengthen the product modification.To know more or enquire any specific service, please visit https://www.stc.group and fill in our enquiry form on https: www.stc.group/contact. 

Radio Frequency and Electromagnetic Testing

 STC is the first non-governmental laboratory in Hong Kong to receive accreditation from Certification and Accreditation Administration of the People’s Republic of China (CNCA) to provide comprehensive ChinaCompulsory Certification (CCC) testing services.  Our laboratory in Dongguan, is the first non-government organization in China to obtain designated CCC testing laboratory status providing full scope CCC toy testing services and CCC testing services for information technology equipment, lighting products and audio-visual equipment.     STC provides one-stop CCC and support services from application and document preparation to type testing and factory inspection to meet all local and oversea CCC needs.  Information Technology Equipment (GB 4943.1-2011, GB 17625.1-2012, GB/T 9254-2008) MicrocomputersPortable computersComputer display devices and projectorsComputer Built-in power supplies, adaptors and chargersIf you have any further question, please feel free contact us or visit our website: https://www.stc.group/en/contact To know more or enquire any specific service, please visit https://www.stc.group and fill in our enquiry form on https: www.stc.group/contact. 

CCC China Compulsory Certificate for IT Equipment

SGS HK Ltd

Defined as materials or products intended to come into contact with food and beverages, FCM is already in contact with them, or may reasonably be expected to come into contact with them. FCM can be found in the machinery that processes our food and beverages, the packaging that carries them, and the equipment we use for storage, cooking, and eating food and drink. FCM must not change the food and drink they are in contact with or endanger human health. Globally, different markets maintain their own FCM regulations to prevent products being placed on the market that alter our food or drink, bring about a deterioration in its organoleptic characteristics, or release hazardous substances. SGS’s global network of laboratories can support your products' compliance with the FCM regulations governing your target market such as: EuropeUSACanadaMercosur (Southern Common Market)Asia Pacific RegionComplying with technical specifications alone may not be sufficient to place FCM in certain markets. Some jurisdictions have implemented strict measures and controls by only recognizing designated laboratories to conduct testing and/or certification bodies (CB) to certify the FCMs are in compliance before allowing these products to access their markets. In all regions, compliance with FCM can be a complex process for economic operators. To avoid costly non-compliance, suppliers are advised to seek professional regulatory assistance for their target market.  Food Contact Materials (FCM) services from SGSensure compliance with requirements for sale and distribution in global markets. 

Food Contact Materials Testing Service

Wenzhou Jiakai Packaging Co., Ltd.

生产流程

Drawing on a complete understanding of government regulations and policy that apply to electrical and electronics industry, STC can help you to test Radio Frequency (RF) and ElectroMagnetic Compatibility (EMC) in accordance with various international standards.  EMC Tests for FCC and IC standards: A. Digital Devices Computer or peripherals Class AComputer or peripherals Class B (e.g. Keyboard, display card, multi-function card, printer, monitor, mouse and scanner etc.)Digital Devices (e.g. video game, etc.)Game controller for console [e.g. Playstation, etc.]Battery-operated Handheld GamesAC operated handheld games B. Radio Frequency Devices AM/FM Broadcast Receiver (DC)AM/FM Broadcast Receiver (AC or AC/DC)DC operated CD/VCD/DVD PlayerAC/DC operated CD/VCD/DVD PlayerAM/FM Broadcast Receiver with CD/VCD/DVD PlayerCar Radio with CD/VCD/DVD27 MHz Remote controlled Transmitter (1 channel)27 MHz Walkie Talkie (1 channel)49 MHz Transmitter (1 channel)49 MHz Walkie Talkie (1 channel)49 MHz Receiver (1 channel)315 to 433 MHz Transmitter (1 channel)315 to 433 MHz Receiver (1 channel)900MHz Transmitter (1 channel)900MHz Receiver (1 channel)2.4GHz Transmitter (1 Pair)Multi-band Broadcast Receiver (AC or AC/DC)Microwave OvenEnergy Saving LampElectronic BallastPocket TVTo know more or enquire any specific service, please visit https://www.stc.group and fill in our enquiry form on https: www.stc.group/contact. 

EMC Tests for FCC and IC standards

EMC Toys Testing Electromagnetic Compatibility for Toys Whole toy testingAS/NZS CISPR 14, C-Tick(RF toys)EN 55014-1/55014-2RED (RF toys)FCC Part 15 (RF toys)If you have any further question, please feel free contact us or visit our website: https://www.stc.group/en/services/detail/toys To know more or enquire any specific service, please visit https://www.stc.group and fill in our enquiry form on https: www.stc.group/contact. 

EMC FCC Part 15 Toys Testing

Unitronics Company Limited

We provide our electronic manufacturing services (EMS) to various industries. In PCB Assembly, we utilize most assembly technologies, including Thru-Hole axial/radial assembly and SMT assembly. Our manufacturing stage supports services like small batches (samples), pilot runs, mass production, and logistics management.  PCB Design for Manufacture and Assembly (DFMA)Design for testability (DFT)Quality and TestingLogistics management

Manufacturing Capabilities & Support Services (EMS)

PPW Sports & Entertainment (HK) Ltd

This is an action-packed and contemporary animated train TV series for preschoolers that follows the exciting adventures of three young trainees. With them, every day is an adventure as children explore their creativity through imaginative train play. Along the way, they&rsquo;ll learn positive values, empowering them to become the best trainee they can be.

My Sourcing