The Hong Kong Standards And Testing Centre Ltd (STC)

All electrical and electronic products that manufacturers plan to sell in the United States must comply and meet relevant RF and EMC requirements under the&nbsp;Federal Communications Commission (FCC).

FCC&nbsp;testing and authorization involves two approval procedures - &#39;Certification&#39;&nbsp;and &#39;Supplier&rsquo;s Declaration of Conformity (SDoC)&#39;.

The approval procedure required to be used is specified in the applicable&nbsp;FCC&nbsp;rule part(s) that apply to the radio frequency functions of a device or an end product. In general, except when otherwise stated in a rule, intentional radiators(transmitters) arerequired to be approved using the certification procedure,and unintentional radiators (e.g.digital circuitry) are approved using the&nbsp;SDoC&nbsp;procedure.

STC&rsquo;s technical competence meets&nbsp;FCC&nbsp;requirements for various scopes of accreditation for testing performed in support of&nbsp;SDoC&nbsp;and Certification.

  FCC Recognized Accredited Scope   	 Unintentional Radiators&nbsp;(FCC Part15 Subpart B) 	 Intentional Radiators&nbsp;(FCC Part 15 Subpart C) 	 U-NII without DFS Intentional Radiators&nbsp;(FCC Part 15 Subpart E) 	 UWB Intentional Radiators&nbsp;(FCC Part 15 Subpart F) 	 White Space Device Intentional Radiators&nbsp;(FCC Part 15 Subpart H) 	 Industrial, Scientific, and Medical Equipment&nbsp;(FCC Part 18)  If you have any further question, please feel free contact us at&nbsp; enquiry@stc.group &nbsp;or visit our website:&nbsp; https://www.stc.group/en/contact 

FCC Testing

Shenzhen Huachuang hengda Technology,Ltd

The electronics manufacturing services(EMS) we provide cover almost the entire product cycle, from electronic design, prototyping, and PCB assembly, to cable and harness assembly, full system integration, product testing, and supply chain management. Our full-service electronic manufacturing services are characterized by superior quality and fast turnaround times, which enable us to meet the various project needs of our customers. 

Electronic Manufacturing Services

Unitronics Company Limited

We provide our electronic manufacturing services (EMS) to various industries. In PCB Assembly, we utilize most assembly technologies, including Thru-Hole axial/radial assembly and SMT assembly. Our manufacturing stage supports services like small batches (samples), pilot runs, mass production, and logistics management.  PCB Design for Manufacture and Assembly (DFMA)Design for testability (DFT)Quality and TestingLogistics management

Manufacturing Capabilities & Support Services (EMS)

XINGHAI CARGO & TRADING (HK) LIMITED

Free zone logistics Smooth customs clearance, highly professional Value-added service: Free zone one-day-tour, warehousing, tallying, processing, inspection and repairs 

保税物流

Svi Public Co Ltd

Electronic manufacturing service, start from PCBA to Final Assembly. Factories located in Thailand, Austria, Slovakia and Hungary. 	 Audio 	 Medical 	 Telecommunication 	 Industrial 	 Transportation 	 etc.,  

Electronic Manufacturing Service - Audio Equipment

Electronic Manufacturing Service
Our industry focus includes industrial products, high end telecommunications, office automation, professional audio and video products, automotive electronics, medical devices, etc. The advanced solutions are sure to keep you on the cutting edge.

Electronic Manufacturing Service

Electronic Manufacturing Service - Industrial Product

Brilliant Design & Build Limited

Fitting Out with ESG in Mind: Aligning Interiors and Sustainability In today’s rapidly evolving marketplace, interior “fitting out” has emerged as a critical component of corporate social responsibility, encapsulating the alignment of workspace design with foundational Environmental, Social, and Governance (ESG) principles. By integrating resource-efficient materials, eco-friendly construction methods, and community-focused project planning, organizations can significantly reinforce their commitment to sustainability.  SITE ASSESSMENT   A robust fitting out initiative begins with a Site Assessment, which explores the spatial layout and structural features of your facility. This evaluation identifies opportunities to minimize surplus material usage, optimize daylight, and reuse existing E &amp; M system with minor alteration during the construction phase. Such proactive measures help decrease environmental impact, enhance resourcefulness, and foster risk awareness across internal teams.  PROJECT MANAGEMENT Supervising safety to protect both on-site personnel and project stakeholders. Facilitating waste recycling through responsible material procurement and disposal. Ensuring quality control, mitigating the risk of rework and the associated resource consumption. By embedding ESG metrics in day-to-day coordination, we keep sight of both design aesthetics and ecological priorities  MAINTENANCE  Through preventive Maintenance, material longevity is enhanced, reducing the environmental footprint associated with frequent replacements. In particular, “green” fittings—like energy-efficient lighting or sustainably sourced flooring—perform at their peak when supported by a diligent maintenance regime. Among the notable advantages are: Extending service life of key fixtures and systems. Mitigating risk by preemptively identifying potential design or structural flaws. Documenting review status to maintain transparency during audits and future planning.  VIP SYSTEM  The cornerstone of our integrated approach is our VIP System, designed to streamline data management, scheduling, and client communication. Its highlights include: Paperless records that limit paper consumption and simplify documentation. History review for a scientifically grounded feedback loop, leading to continuous improvement. Service booking to ensure timely follow-up actions and swift issue resolution. Why Choose Our ESG-Aligned Fitting Out Services Our evidence-based methodologies, combined with a passion for innovative design, directly advance your corporate sustainability objectives while elevating the quality of your interiors. Whether you aim to gain trust among environmentally conscious investors or provide a healthier, more engaging workspace for employees, our holistic approach—encompassing Site Assessment, Project Management, Maintenance, and the VIP System—keeps both style and sustainability in balance. 

ESG  SOLUTION   SYSTEM   FOR INTERIOR DESIGN      & FITTING OUT WORKS    PROJECT

Electronic Manufacturing Service - Medical Product

Shenzhen Winwai International Exhibition & Advertising Co., Ltd

Shenzhen Winwai International Exhibition &amp; Advertising Co., Ltd.mainly for domestic foreign trade enterprises to explore the international market, adhere to the customer enterprise as the core, and build a service bridge for the enterprise's international market. The company has established a long-term close cooperative relationship with major exhibition organizers in the world, and is also an authorized agent recognized by the Hong Kong Trade Development Council, providing services for domestic enterprises to promote overseas and assisting in signing up for various international exhibitions of the Hong Kong Trade Development Council. Including the popular Hong Kong TDC Spring and Autumn Electronics Show, Hong Kong International Jewellery Show, Hong Kong TDC Spring and Autumn Lighting Show and Hong Kong TDC Gifts and Gifts Show, and is responsible for the domestic marketing business of HKTDC's B2B platform, HKTDC's trade magazines, which plays a significant role in promoting the international market share and brand effect of Chinese enterprises' products. We take "customer supreme, meticulous service" as the concept, and provide accurate, high-quality, efficient and thorough exhibition services for every enterprise with sincere attitude. Foreign international exhibition advertisements hope to join hands with TDC to provide more opportunities for domestic foreign trade enterprises and manufacturers and expand more overseas markets. 深圳市汇外国际展览广告有限公司主要为国内外贸企业开拓国际市场，坚持以客户企业为核心，为企业国际化市场铸造服务桥梁，公司与世界各大展览主办机构建立了长期紧密的合作关系，同时也是香港贸易发展局国内认可授权代理，为国内企业海外推广提供服务，协助报名参加香港贸发局的各类国际性展览，包括热门的香港贸发局春秋季电子展、香港国际珠宝展、香港贸发局春秋季灯饰展及香港贸发局礼品及赠品展、并负责香港贸发局网络 B2B 平台贸发网及贸发局行业杂志国内营销业务，为我国企业的产品提高国际市场占有率和提升品牌效应起到显著的促进作用。我们以"客户至尊，精心服务"为理念，以真诚的态度为每家企业提供精确、优质、高效、周密的展览全程服务。汇外国际展览广告希望携手贸发局为国内外贸企业厂商提供更多机会，拓展更多海外市场。 

Exhibition subsidy

HONGKONG YILAW INSPECTION AND TESTING TECHNOLOGY CO., LIMITED

FCC (US)Ensure your electronic products meet U.S. Federal Communications Commission requirements before entering the market. Service Highlights Identify applicable FCC rules for electronic and wireless products Conduct electromagnetic interference (EMI) and radiofrequency (RF) testing Prepare and review technical documents, test reports, and labeling Manage certification submission to FCC-recognized bodies Reduce risk of border rejections or costly recalls Why Choose ECQA Specialists in U.S. regulatory compliance and documentation Partnership with accredited FCC-recognized testing laboratories Detailed guidance on labeling, documentation, and certification workflows Streamlined coordination for faster market entry About ECQAECQA is a third-party inspection and quality control service provider operating across Asia, Europe, and other major global manufacturing hubs. We offer product inspections, factory audits, testing, and certification to ensure quality and compliance. Book FCC Certification Services TodayAchieve FCC compliance and enter the U.S. market with confidence. Contact us for a quotation. 

FCC (US)

We provide a wide variety of inspection services for all types of consumer products. We also provide factory audit services. We have a worldwide network of co-operation with inspection bodies in Asia, Europe and USA. Reasonable prices.Good reputation.To know more or enquire any specific service, please visit https://www.stc.group and fill in our enquiry form on https: www.stc.group/contact. 

Inspection Service

Hong Kong Fashion Designers Association

The Hong Kong Fashion Designers Association (HKFDA) was founded in 1984 by a group of successful and enthusiastic local fashion designers. As a non-profit making and self-financing organization, it aims to unite fashion designers, with both professionalism and expertise, to develop and better both their careers and the industry within and beyond the territory. With supports from the industry and fellow designers in the past 26 years, the Association has evolved to a key platform to share ideas and experiences through organizing fashion events.&nbsp;

 
  Events include&nbsp;catwalk shows, seminars, interviews, etc. 
  Promote the growth of local fashion industry. 
 

Event Organization

Drawing on a complete understanding of government regulations and policy that apply to electrical and electronics industry, STC can help you to test Radio Frequency (RF) and ElectroMagnetic Compatibility (EMC) in accordance with various international standards.  European (&amp; Australia / New Zealand) EMC Test:  A. Components (with external antenna jack) ReceiverReceiver with CD/VCD/DVD playerB. Components (without external antenna jack) DC Operated AM/FM RadioDC Operated AM/FM Radio with AuxAC/DC Cassette RecorderAC/DC AM/FM Radio with AuxAC/DC with CD &amp; Radio + (Optional Aux)Hi-Fi + CD + Radio + Amp + (Optional Aux)AC/DC SpeakerC. Household equipment DC with motor/electric w/o electronicDC with electronic which is less than 15MHzDC with motor and electronic which is less than 15MHzAC/DC with electric but w/o electronic and thermal switchAC/DC with electric and thermal switch but w/o electronicAC/DC with electronic and motor but w/o thermal switchAC/DC with electronic less than 15MHz and with thermal switchAC/DC with electronic more than 15MHz and thermal switchD. Information technology equipment No data transfer, No electronic (EN61000-6-3, EN61000-6-1)No data transfer, with electronic (EN61000-6-3, EN61000-6-1)With data transfer, with electronicE. Lighting Equipment DC w/o electronicsAC/DC w/o electronicsDC with electronicsAC/DC with electronics but w/o fluorescent lampAC/DC with electronics with fluorescent lampEnergy saving lampElectronics ballastF. Toys DC with motor/electric w/o electronicDC with electronic less than 15MHz w/o motorDC with electronic less than 15MHz with motorDC with electronic more than 15MHz w/o motorDC with electronic more than 15MHz with motorDC racing car on track, no electronicsAC/DC racing car on tracks, no electronicsGame controller for console [e.g. Playstation, Dreamcast, N64, etc.]G. Generic Products DC operated without infra red e.g. calculator, clock, camera, solar panel etc.DC operated with infra red e.g. calculator, clock, camera, solar panel etc.AC operated calculator, clock, fan (use in computer) etc.To know more or enquire any specific service, please visit https://www.stc.group and fill in our enquiry form on https: www.stc.group/contact. 

EMC Tests for European Standards

 	 Full service EMS 	 Including Product Design/Development 	 PCBA to System Build, advanced production automation &amp; test 	 Cleanroom assembly 	 PLM services  

EMS services - Medical and Automotive

PassTo Technolody Ltd

Solveyour cross-border payouts with a single, powerful solution. Weconnectyou to licensed partners in China toprocessRMB payments andhandleall regulatory compliance.Streamlineyour payroll, supplier payments, and international expenses. PASSTO supports multi-channel and T+1 transactions. 

PASSTO Payment gateway

Amit Lakshmi Sai Manufacturing

   Sourcing Agent   Shipping Agent   China Agents, Sourcing Agent   export agent   Apparel agent   Mobile phone agent   Services: seach suppliers, visit factory  

Sourcing Agent 

Leading global provider of full turnkey box-build contract electronics manufacturing and design services to the industrial and professional electronics sectors. We have 4 factories located in Thailand, Austria, Slovakia and Hungary with 3,300 employees. 	 Industrial 	 Automotive 	 Telecommunication 	 Medical 	 Audio/video 	 etc.,  

EMS Electronic Manufacturing Services

Sun Wing Technology Co

   We provide electroplating service.   Different kinds of electroplating available such as 16K, 18K &amp; 23K micron gold; Swiss color standard including 1N, 2N, 3N, rose gold; micron palladium, PNP, silver; black ruthenium, rhodium, gun color, titanium color; antique red, white &amp; green copper, antique silver, CSP, full color and transparent elecoat, etc.  

Electroplating Service

Ching Luen Printing Co Ltd

  This post-press service uses the advanced science and technologies for added efficiency. The different types of folding machines, automatic saddle stitching systems and other machines offer a stable and reliable performance. This service is especially suitable for professional uses. With experienced management team.With excellent after-sales supports.

Post-Press Service

Although these advertising materials are relatively inexpensive, their manufacturing quality should meet certain standards and regulations set in different markets to ensure that these products are safe for use.  With our technical expertise, STC offers different types of testing services on Gift &amp; Premium items to manufacturers, retailers, suppliers, and distributors.  Our Gift &amp; Premiums Testing services include: Chemical Analysis Azo DyesFormaldehydeLead ContentPhthalatesRelease of NickelFlammability Testing Fabric &amp; Textile MaterialsSoft &amp; Hard ToysMicrobiological Testing Microbial Limit TestAnti-microbial Preservative EffectivenessPhysical &amp; Mechanical Testing Sharp Points &amp; Sharp EdgesSmall Parts &amp; Small BallsMagnetElectrical Safety &amp; EMC Testing Battery-operated ItemRemote Controlled ItemTransformerElectronic GamesInternational Standards Global(ISO 8124)America(ASTM F963)Australian(AS / NZS ISO 8124)Chinese(GB)Europe(EN 71 &amp; REACH)Japanese(JIS)If you have any further question, please feel free contact us or visit our website: https://www.stc.group/en/contact To know more or enquire any specific service, please visit https://www.stc.group and fill in our enquiry form on https: www.stc.group/contact. 

Gifts and Premiums Testing

Pre-Shipment Inspection (PSI) For Electrical &amp; Electronic ProductVerify product quality and packaging before shipment to reduce customer complaints. Service Highlights Random sampling of finished products for visual and functional checks Confirm packaging, labeling, and accessory completeness Inspect product appearance, dimensions, and performance Ensure shipping cartons and palletization are secure Provide pass/fail reports with detailed photo evidence Why Choose ECQA Experienced inspectors across key sourcing regions Standardized inspection procedures for consistency and reliability Transparent inspection reports with photos, checklists, and defect analysis Flexible scheduling to match your shipment timeline About ECQAECQA is a third-party inspection and quality control service provider operating across Asia, Europe, and other major global manufacturing hubs. We offer product inspections, factory audits, testing, and certification to ensure quality and compliance. Book Pre-Shipment Inspection TodaySafeguard your order before it leaves the factory. Contact us for a quotation. 

Pre-Shipment Inspection For Electrical & Electronic Product

V-Trust Inspection Service Co., Ltd

 	 Some tests should be done in the professional laboratory instead of testing at factory because of accuracy or special testing equipments required. 	 As a leading inspection service supplier in China, V-Trust has a long-term cooperative relationship with many accredited laboratories, so we can provide you more competitive prices and professional testing arrangement. 	 V-Trust can efficiently manage the testing of samples in liaison with qualified and accredited laboratories when you need formal certification or professional test. 	 We can go to the factory and select samples randomly on site instead of letting the factory choose them. 	 We can select the best laboratories, based on price and lead-time, for each type of test or certification, such as CE, EMC, EN71 and RoHS etc.  

Testing Arrangement

Leconcepts Holdings Co Ltd

     We are an experienced manufacturer which is good at produce plastic goods with fine paintings.   Some of our productions are sold in the museums and heritages.   Services include hand painting, spray painting, tempo painting and so on.   We an OEM company which is strong in developing customers' ideas/concepts in the production.   We have steady cooperation with many brands and designers for product development.   Fully comply with the international safety requirements, if any.   More photos and samples can be available upon request from qualified buyers.    

My Sourcing