Heated Vest

Material:polyester, cotton

Heated Area:Back and front chest

Instructions

Products included:

1pcs heated vest

1pcs 5V 5000mAh polymer battery pack

1pcs 5V 1A charger

Install way:

1.Put on the vest

2.Connect the vest with the power bank with the cable

3.The heated vest will heat up in a minute

The Heating Mode is activated by pressing the black ON/OFF keypad control

button located on the top of the vests for about 3 seconds. The LED light on

the keypad control will then flash and light up, indicating that the vests are in the

Heating Mode.

The initial color of the LED light indicates the present charging status of the battery:

RED indicates that the battery is fully charged.

YELLOW indicates that the battery is halve charged and

GREEN indicates a low battery level and that the battery should be charged before

use!

The temperature can be adjusted by pressing and releasing the keypad control

button.

L - Green LED (34°C/ 93°F with approximate heating time of 4 – 5 hours)

M - Yellow LED (39°C/ 102°F with approximate heating time of 3 – 4 hours)

H - Red LED (44°C/ 111°F with approximate heating time of up to 2 hours)

Please note that the actual heating time always depends on the outside temperature

and if the vests are worn separately, or in conjunction with outer vests or

mittens.