This custom-fit subwoofer for compatible ZEEKR 009 vehicles combines a low-frequency speaker with a contoured black enclosure. Its shaped housing is intended for a vehicle-specific mounting area, providing a dedicated bass component for a compatible audio upgrade or replacement installation.

The enclosure features mounting tabs and a recessed speaker terminal connection. The subwoofer uses a 40 oz magnet and a 2-inch TIL voice coil with 4-layer winding. With a nominal impedance of 4 ohms, it is rated for 200W RMS power handling and 450W maximum power handling.

Its specified frequency response extends from 30Hz to 600Hz, with a sensitivity of 89dB (1W/1m). These specifications provide reference points for amplifier selection and integration with the vehicle’s existing audio system.

For a ZEEKR 009 bass upgrade, confirm that the enclosure profile, mounting points, and wiring requirements match the specific vehicle. Match the subwoofer to an appropriate amplifier and select crossover settings according to the complete product specifications.

Key Features

• Custom-fit subwoofer intended for compatible ZEEKR 009 vehicles.
• Contoured black enclosure for a vehicle-specific installation.
• Mounting tabs and a recessed speaker terminal connection.
• 200W RMS rated power handling.
• 450W maximum power handling.
• 4 ohm nominal impedance.
• 2-inch TIL voice coil with 4-layer winding.
• 40 oz magnet.
• Specified frequency response of 30Hz–600Hz.
• 89dB sensitivity measured at 1W/1m.

Technical Specifications

Product Type: Vehicle-Specific Subwoofer with Enclosure
Intended Vehicle Application: ZEEKR 009
Nominal Impedance: 4Ω
Rated Power (RMS): 200W
Maximum Power: 450W
Magnet Weight: 40 oz
Voice Coil Specification: TIL
Voice Coil Diameter: 2 Inches
Voice Coil Winding: 4 Layers
Frequency Response: 30Hz–600Hz
Sensitivity: 89dB (1W/1m)
Enclosure Color: Black

Fitment and Installation

Confirm compatibility with the vehicle’s model year, trim, seating configuration, and original audio system before purchase. Verify the designated mounting location, enclosure clearance, fixing points, wiring connections, and amplifier compatibility. Set the crossover and any required filtering according to the complete product specifications and the installation requirements.