Camera uses 1/4" extra-sensitive sensor CMOS specially configured for operation in low light conditions - have no "blue" noise, very clear and bright image at night, in poor visibility, in rain or fog.The video signal format switching function allows using the camera in PAL or NTSC. It 10s switch on timer activated when the engine starts and 10s switch off delay activated when the reverse gear is disengaged. Camera has an extra-wide 175° viewing angle and is absolutely free from geometric distortions thahks to special optics with an anti-reflective glass lens. The option to disable parking guide lines and image mirroring allows using the camera both for rear and front view. Camera is compatible with Gazer CAxxx mounts and can be installed instead of license plate light. Gazer mounts are identical with original license plate lights and use the original lamp of license plate light or LED backlight with 2700K warm light. Camera installation is easy and considered. The control and commutation unit for plug&pluy installation included. It consists with special power cable with relay block and LC-filter, commutation unit, wiring (26.2 ft), additional cable with power jack and RCA video out - to plug&play monitor connection. Due to the considered connection, there are no conflicts with the vehicle's electrical system when using the camera. 

Specifications: 

• Sensor CMOS 1/4"; PAL 720x576, NTSC 720x480 
• Resolution PAL 540TVL, NTSC 500TVL 
• Video signal format PAL/NTSC 
• Angle of view 175º 
• Sensitivity 0.1Lux 
• Signal/noise ratio › 46dB 
• Mirror image ON/OFF 
• Guide lines on the image ON/OFF 
• Supply voltage DC 12V 
• Current consumption 85mA 
• Protection level IP67 
• Operating temperature -30° - +70° C