My Sourcing

LanguageEnglish

Please enter a valid keyword with 2 or more characters / numbers.

ETCR Electronic Technology Co Ltd
Enquire

Disclaimer

Some links on this website may take you to other third-party sites and you acknowledge and agree that HKTDC and the HKTDC Affiliates have no responsibility for the accuracy or availability of any information provided by those linked websites.

Links to other websites do not constitute an endorsement by HKTDC of such websites or the Information, products, advertising, or other materials available on those websites.

Share this page
Phase Detector
Share this page
Model No.:
ETCR1000A
Brand:
ETCR
Colour:
Red
Size:
70 x 75 x 30mm
Port:
Guangzhou
Type of Payment:
T/T
Description
Contact Supplier
Description

Presented is a phase detector which is manufactured for positive and negative phase detection. The phase detector is designed to perform phase sequence checks and live line checks of a 3-phase circuit using a static induction voltage clip. The main console features a LED display for showing test status.

  • Function: phase detection positive/negative.
  • Display: LED.
  • Weight (g): 270.
  • Continuously using 200 hours.
  • The static induction voltage clips are used to be able to clip on a clayed wire.
  • Meets IEC-10101 (EN61010), CAT Ⅲ (600V) safety requirement.
  • Red LED lamps are used to make the indication visible in dimly lit areas.
  • The direction of phase sequence can be checked easily using the LED lamps, which blink in order.
  • Technical functions: phase detection (normal phase, reverse phase and phase deficiency), live wire examination, simple power detection, breakpoint location and line maintenance.
  • Power supply: DC 3V AA Mn batteries (R6P) x 2pcs, continuously working for 200 hours.
  • Live voltage range: AC0~600V, 40~70Hz (Sine Wave Continuous Input)
  • Clamp wire size: diameter ø18mm, insulated wire available (equivalent to wire cross-sectional area 120mm²).
  • LED display.
  • Positive phase: four lights of phase detection rotate in clockwise direction, with intermittent short beeps.
  • Reverse phase: four lights of phase detection rotate in counterclockwise direction, continuous beep.
  • Live power: R-S and S-T lights on within voltage setting range.
  • Phase deficiency: R-S, S-T lights do not flash.
  • Open circuit: R-S, S-T lights do not flash.
  • Boot indication: boot indication light turns on after booting.
  • Auto power off after 3 minutes, the meter automatically cut off power supply.
  • Clamp lead length: 0.5m.
  • Meter weight: 180g (with battery).
  • Working temperature and humidity: -10℃~55℃; below 80% RH.
  • Storage temperature and humidity: -20℃~60℃; below 90% RH.
  • Maximum measured voltage: AC 600V.
  • Dielectric strength: 5.4kVrms.
  • Maximum rated power: 100mVA.
  • Safety provisions: EN61010-1: 2001, EN61010-031: 2002, pollution level 2, CAT III (600V), transient over-voltage 6000V.
  • Meter: 1 piece.
  • Carrying case; 1 piece.

ETCR Electronic Technology Co Ltd

ETCR Electronic Technology Co Ltd

Guangdong, Mainland China

Manufacturer

You may also like

Unfollow the following supplier?