Wall mounted electric heating controller intended for control of radiators or electric heating coils. It is a complete controller with built-in sensor and setpoint adjustment. It pulses the whole load on/off and utilises time-proportional triac control. Both automatic control function adaptation, P- or PI-control and supply voltage adaptation, 230 V / 400 V.

Technical data

Supply voltage:230...400 (210 - 415 V ~ 50/60 Hz 16 A)

Pulse period:60 s

Mounting:Wall

Power dissipation :20 W of heat at full load

Protection class:IP20

P-band:20 K (rapid temperature changes), 1.5 K (slow temperature changes)

I-time:6 min (rapid temperature changes)

Ambient temperature :0...30 °C

Ambient humidity: Max. 90 % RH, non-condensing

Storage temperature :-40...+50 °C

Dimensions:95 x 153 x 41 mm

Cable connection :Cage clamp

Inputs/outputs (I/Os)

Output load:Resistive load, max 16 A, min 1 A

Sensor inputs :External main sensor and external sensor for temperature limitation

Sensor element:NTC Regin standard

Setpoint range:0...30 °C (the external sensor determines the temperature range)

Setpoint alternatives :Either internal setpoint potentiometer or external setting device

Night setback:0...10 K

Indication:Red LED that is lit when power is pulsed to the heater

Article

PULSER-M :Electric heating controller with min./max. limitation

PULSER-ADD :Add-on unit