Electronics

Find Electronics from the best B2B online marketplace. Find a reliable Electronics supplier, vendor, manufacturer or distributor to get free quote on HKTDC Sourcing.

Electronics Suppliers and Manufacturers

Parts, Components & Raw Materials

Find Parts, Components & Raw Materials from the best B2B online marketplace. Find a reliable Parts, Components & Raw Materials supplier, vendor, manufacturer or distributor to get free quote on HKTDC Sourcing.

Parts, Components & Raw Materials Suppliers and Manufacturers

Active Components

elec

Find Active Components from the best B2B online marketplace. Find a reliable Active Components supplier, vendor, manufacturer or distributor to get free quote on HKTDC Sourcing.

Active Components Suppliers and Manufacturers

Wanlida Group Co., Limited

Place of Origin: Zhejiang, China (Mainland) Brand Name: SHARKWARD Model Number: SK603 Usage: motion sensor Theory: microwave sensor Output: Switching Transducer Installation: wall/ceiling mounted Plastic: PC Detection: 360&deg; Power supply: 110-130VAC/ 220-240VAC/50-60Hz Light control: 2-2000Lux Reach: 2-10m (dia.) Ajustable Time setting: 8sec.to 30 min. Power consumption: Approx.0.9w warranty: 5 years Rated load: 1200W(220V-240V),600W(110-130V)

SK603 Mini Microwave Motion Sensor

ZHONGSHAN SATTECH ELECTRONIC COMPANY LTD.

 High-power amplifier with multiple controls on the front end, which design uses components that minimize the total noise figure. Equipped with 1 input and 1 output (line). The amplifier is equipped with remote power feeding(it can power or be powered with direct current through the coaxial cable.)     Separate amplification minimizes intermodulation between bands and provides high output levels Designed using Push-Pull technology, which guarantees levels in the 123 dBμV range for terrestrial signals. Includes a high-performance low-power consumption switch-mode power supply High-screening Zamak chassis The design facilitates appropriate cooling 

Broadband multi band amplifier for remote power supply

HK HANGDIN TECH LIMITED

 This series is an Industrial Grade, Gigabit Ethernet, PoE Splitter, designed to deliver data, via RJ-45 Ethernet connector, and electrical power, via screw terminal block, to non-PoE devices. This device saves the high cost of running separate electrical service to edge devices. The device acts as PD equipment and can be powered by standard PoE IEEE802.3af/at PSE (Power Source Equipment) switches or work when paired with LNK-INJ301 PoE Injectors. The data transmission, up to Gigabit speeds, with power output voltages of 12VDC, run simultaneously up to the Ethernet limit of 100 meters. Simple settings of the LNK-INS301-12V, make it a plug and play device, requiring no tools or software configuration, and provides ease of use, with flexible installation and high reliability. Splits power and data from PoE InputOne RJ-45 PoE Port (Data &amp; Power In)One RJ-45 Port (Data Out)One 12VDC Output (2-pin Terminal Block)Support IEEE802.3af/at PoESupport 10/100/1000Base-TDistance up to 100 metersShort-circuit protection for power outputIP40 rugged metal housing and fanlessSupport DIN-Rail &amp; Wall-mount installationExtensive LED indicators for PoE diagnosticsWide operating temperature -40 ~ 80°C

 Industrial 30W PoE Splitter

Shenzhen Luguang Electronic Technology Co Ltd

   BTA41-600B TO-3P.   40A standard TRIAC.   High surge current capability.   Glass passivated PNPN devices.  

TRIAC

United Sources Electronic Components Ltd

2SK, AUIRFS, BSS, IHW, IPA, IPD, IPG, IPP, IPW, IRF, IRFB, IRFBC, IRFD, IRFDC, IRFI, IRFIBC, IRFIBF, IRFL, IRFP, IRFPC, IRFR, IRFRC, IRFS, IRFU, IRFZ, IRGP, IRLML, IRLZ, ITLL, STP, FQP, FQPF, SI, SIHP, SPA, SPW, SPP, SPD, STB, STD, STF, STFI, STFU, STFW, STL, STP, STW, SUD, SUM, SUP Series
Stock is first come first served &amp; price for final reconfirmation

N-Channel Mosfet Transistor with Three Terminals

   Package: TO-92.   High performance.   10 years manufacturing experience.   Collector-base voltage: 50V.   Collector-emitter voltage: 45V.   Emitter-base voltage: 5V.   Collector current-continuous: 800mA.   Collector power dissipation: 625mW.   Very competitive price.   Packing quantity: 1,000pcs/bag or 2,000pcs/tape &amp; box.   Lead time: 2 weeks.  

PNP Transistor

Ningbo Jiuyi Electronic & Technology Co Ltd

 	 PIR motion sensor adaptor with ON/AUTO/OFF switch &amp; LUX sensor 16A / 3680W  

PIR Adaptor

Huichuan Electric Limited Company of Weifang

Mosfet

Audio Transistor

6821,13001,13002,13003,13005,13007,13009 etc.

Power Transistor

Guangdong Suncom Power Technology Co.,Ltd

Input voltage: 100-270V(Input voltage 100-120V, power decrease into 80%) Output voltage: 100-180V/180-260V Electrical performance parameters:THD&lt;10%/PF&gt;0.95 Protections: Input UVP/out SCP/OVP/OTP Certifications:CCC/CB/ENEC-CE/CUL/UL/FCC/CLASS P Surge protection: 6/10KV Efficiency: 95% IP grade: IP65 5 years warranty 

LED driver-LVS series

Changzhou Pioneer Electronic Co., Ltd.

 Power Entry Module Filters with Fuses Holder and on/off Switch&nbsp;   	 The PE 8400 Series Power Entry Module Filters with Double Fuses Holder and on/off Switch 	 Specification : Rated Voltage: 120/250 VAC Rated Current: 1A 	 ~10A Operating Frequency: 50/60Hz Temperature Range: HPF 25/085/21 Test Voltage ( 1min ): Line to Ground: 2000 VAC Line to Line: 1450 VDC Description : The PE 8400 power entry module combines an IEC inlet, a mains filter with single or dualfuse holder and a 2-pole rocker switch in a small form factor. High conducted attenuation performance,based on chokes with high satur ation resistance and excellent thermal behavior. Rated currents up to 10A Rear/front or snap-in mounting. 	 Single or dual-fuse holder,available for fuses &Oslash;5 x 20mm 2-pole rocker switch. Optional medical version (B type) Snap-in versions (S type) Custom-specific versions are available on request. Typical Applications : Single-phase power supplies, switch-mode power supplies Test and measurement equipment Portable electrical and electronic equipment Consumer goods EDP and office equipment Medical equipment  

Power Entry Module Filters 

High & Low Technology Co Ltd

This power entry module features all the advantages of IEC connectors (IEC 320 socket), fuse holders, EMI/EMC filters, switches, and so on. It boasts a compact design with a strong housing. This module is designed for use in computers, office power supplies, medical grade devices, and so on. 	 All-in-one solution. 	 Long service life.  

Power Entry Module

Continental Device India Ltd

The MELF diode is used for switching power supply. It features durable glass construction for lasting use. This MELF diode is applicable for different electronic devices.   Excellent workmanship.   Available in different designs.  

MELF diode

Crown Rise Electronic Enterprises Limited

This is a series of single-phase EMI filters that delivers reliable performance. It is easy to install and safe to operate. This series is suitable for electronic equipment, measuring instruments and digital systems.   D, DX, DT series: general purpose, easy to install, for electronic equipments and measuring instruments.   K series: high performance filters, good performance of common mode and differential mode interference suppression, for digital systems (particularly for switching power supplies) to suppress the continuity or intermittent pulse interference.   T series: high performance filters, low leakage current, for digital systems (particularly for switching power supplies) to suppress the continuity or intermittent pulse interference, especially for low impedance loads.  

Single-Phase EMI Filter

SIFIRST TECHNOLOGIES NANHAI LTD

Features:   Built-in 600V power MOSFET.   Proprietary &ldquo;zero OCP/OPP recovery gap&rdquo; control.   Programmable switching frequency.   Built-in soft start function.   All pins floating protection.   Very low startup current.   High voltage CMOS process with excellent ESD protection.   Frequency reduction and burst mode control for energy saving.   Current mode control.   Built-in frequency shuffling.   Programmable switching frequency.   Built-in synchronous slope compensation.   Cycle-by-cycle current limiting.   Built-in leading edge blanking (LEB).   Constant power limiting.   Audio noise free operation.   VDD OVP &amp; clamp.   VDD under voltage lockout (UVLO).  Applications:   Offline AC/DC fly-back converter for.   AC/DC adapters.   Open-frame SMPS.   Set-top box power supplies.   ATX standby power.   &nbsp;  

PWM Power Switch

Top Dynamic Enterprises Limited

 	 Features: Ultra small package, two or more dies in one package. Simplify circuit design, cost saving and reduce PCB space requirements. 	 Products: Schottky Barrier Diode, Switching Diode, Zener Diode and Transistor. 	 Applications: High density circuit, OLED TV, portable electronics and power supplies.  

SOT-563

Yunpen Electronic Co., Ltd

The EMI filter is an in-line device used to attenuate conducted radio frequencies effectively. The EMI filter is perfect for a variety of power supplies, monitors and other electronic gadgets. Professionally designed, the EMI filter ensures excellent performance.
   IEC connector.   Wide application.   Load: YA, YB, YL (fuse drawer), YO (snap-in), YQ and YR (switch).  

EMI Filter

Features:   Less than 100mW standby power.   Brownout Protection (BOP).   Proprietary &quot;&eta;-BalanceTM&quot; to boost light load efficiency.   Proprietary &quot;Audio Noise Free OCP compensation&quot;.   Proprietary &ldquo;zero OCP/OPP recovery gap&rdquo; control.   Fixed 65KHz switching frequency.   Frequency reduction and Burst Mode Control for energy saving.   Built-in soft start function.   Pins floating protection.   Current mode control.   Built-in frequency shuffling.   Built-in synchronous slope compensation.   Cycle-by-cycle current limiting.   Built-in leading edge blanking (LEB).   Constant power limiting.   Latch plug-off protection.   VDD OVP &amp; clamp.   VDD under voltage lockout (UVLO).  Applications:   Offline AC/DC fly-back converter for.   AC/DC adapters.   Open-frame SMPS.   Set-top box power supplies.   ATX standby power.   &nbsp;  

Pulse Width Modulation Controller

 	 PE5000-3-01 12V 48V 80V 250V DC emi noise waves low pass filter 	 What are the Product details? 	 Designed for DC power line 	 Excellent differential and common-mode attenuation 	 High performance, easy to install 	 Custom design acceptable 	 What are the applications of our EMI filter? 	 Available for all kinds of electronic equipment&rsquo;s and measuring instruments(DC side):switching power supply 	 Private Branch Exchange(PBX) 	 Data communication etc 	 What are the specifications EMI filter? 	 Rated Voltage：12/24/48/80/250VDC 	 Rated Current：600A 	 Operating Frequency：50/60Hz 	 Temperature range：HPF 25/085/21 	 Test Voltage(1 min)： 	 Line to Ground :350VDC 	 Line to Line :500VDC  

Noise Waves Low Pass Filter

Raytac Corp

Raytac&rsquo;s MDBT42 is a BT5 and BT4.2 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF52832 SoC solution, which incorporates: GPIO, SPI, UART, I2C, I2S, PWM and ADC interfaces for connecting peripherals and sensors.

About the module: 	 1. Dual Transmission mode of BLE &amp; 2.4Ghz RF upon customer preference. 	 2. Compact size with (L) 13.8 x (W) 8.8 x (H) 1.9 mm. 	 3. Low power requirements, ultra-low peak, average and idle mode power consumption. 	 4. Be compatible with a large installed base of mobile phones, tablets and computers. 	 5. Fully coverage of BLE software stack 	 6. BLE &amp; RF transmission switching helps products fit all operation system and most hardware. 	 7. BT5 &amp; BT4.2 Bluetooth Specificaiton Certified 	 8. FCC/IC/CE/Telec/KC/SRRC safety regulation certification granted.FeaturesMulti-protocol 2.4GHz radio 	 32-bit ARM Cortex &ndash; M4F processor 	 512KB flash programmed memory and 64KB RAM 	 Software stacks available as downloads 	 Application development independent from protocol stack 	 On-air compatible with nRF51, nRF24AP and nRF24L series 	 Programmable output power from +4dBm to -20dBm 	 RSSI 	 RAM mapped FIFOs using EasyDMA 	 Dynamic on-air payload length up to 256 bytes 	 Flexible and configurable 32 pin GPIO 	 Programmable peripheral interface - PPI 	 Simple ON / OFF global power mode 	 Full set of digital interface all with Easy DMA including: 	 3 x Hardware SPI master ; 3 x Hardware SPI slave 	 2 x two-wire master ; 2 x two-wire slave 	 1 x UART (CTS / RTS) 	 PDM for digital microphone 	 I2S for audio 	 Quadrature demodulator 	 12-bit / 200KSPS ADC 	 128-bit AES ECB / CCM / AAR co-processor 	 Lowe cost external crystal 32MHz &plusmn; 40ppm for Bluetooth ; &plusmn; 50ppm for ANT Plus 	 Lowe power 32MHz crystal and RC oscillators 	 Wide supply voltage range 1.7V to 3.6V 	 On-chip DC/DC buck converter 	 Individual power management for all peripherals 	 Timer counter 	 5 x 32-bit 	 3 x 24-bit RTC 	 NFC-A tag interface for OOB pairing  

&nbsp;

Nordic nRF52832 BLE Module

 	 PE7003-63-M6 1~250A feedthrough EMI line filter for shielding 	 Features:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 	 Feedthrough capacitors offer a high insertion loss a broad of frequencies from a few&nbsp; tens of kHz up to the GHz region 	 Very low internal series inductance 	 Very high self-resonant frequency 	 Self-healing dielectric 	 High quality and reliability 	 Through-bulkhead mounting 	 Anti-twist protection 	 Typical Application:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 	 Switching and cellular equipment 	 Computer servers 	 UPS power supplies 	 Increasing system and information security&nbsp; 	 AC Power line filter for 250VAC power lines 	 DC Power line filter for 480VDC battery power 	 Power supplies 	 Medical equipment 	 Shielded rooms 	 Specification: 	 Rated Voltage:80/250VDC 	 Rated Current:1A~250A 	 Operating Frequency: DC 	 Temperature range: HPF 40/085/56 	 Test Voltage(1 min): 	 250VAC@50/60Hz 	 80VDC~600VDC  

Feedthrough EMI Line Filter for Shielding

Features:   Proprietary &quot;&eta;-BalanceTM&quot; to boost light load efficiency.   Proprietary &quot;zero OCP/OPP recovery gap&quot; control.   Built-in soft start function.   All pins floating protection.   Very low startup current.   High-voltage CMOS process with excellent ESD protection.   Frequency reduction and burst mode control for saving energy.   Current mode control.   Built-in frequency shuffling.   Programmable switching frequency.   Built-in synchronous slope compensation.   Cycle-by-cycle current limiting.   Built-in leading edge blanking (LEB).   Constant power limiting.   Audio noise-free operation.   VDD OVP &amp; clamp.   VDD under voltage lockout (UVLO).  Applications:   Offline AC/DC fly-back converter.   AC/DC adapters.   Open-frame SMPS.   Set-top box power supplies.   ATX standby power.  

AC/DC PWM Controller

 	 EMI EMC power entry noise IEC Inlet low pass filter 	 Description&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 	 Compact unit, light weight, low price, easy to install 	 Rear/front or snap-in mounting.(S and S1 type) 	 High quality components ensure the safety and reliability of filters 	 Optional medical versions(B type)comply with the requirements of&nbsp;IEC/EN60601-1 for creepage and clearance, leakage current and high potential testing 	 Wide mounting flanges available 	 Typical Application： 	 Single-phase power supplies, switch-mode power supplies 	 Small to medium-sized machines and household equipment 	 Portable electrical and electronic equipment 	 Test and measurement equipment 	 Medical equipment 	 Specification： &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 	 Rated&nbsp;Voltage：120/250VAC 	 Rated&nbsp;Current：1A~10A 	 Operating&nbsp;Frequency：50/60Hz 	 Temperature&nbsp;range：HPF 25/085/21 	 Test&nbsp;Voltage(1&nbsp;min)： 	 Line&nbsp;to&nbsp;Ground&nbsp;:2000VAC 	 Line&nbsp;to&nbsp;Line&nbsp;:1450VDC  

My Sourcing