Electronics

Find Electronics from the best B2B online marketplace. Find a reliable Electronics supplier, vendor, manufacturer or distributor to get free quote on HKTDC Sourcing.

Electronics Suppliers and Manufacturers

Parts, Components & Raw Materials

Find Parts, Components & Raw Materials from the best B2B online marketplace. Find a reliable Parts, Components & Raw Materials supplier, vendor, manufacturer or distributor to get free quote on HKTDC Sourcing.

Parts, Components & Raw Materials Suppliers and Manufacturers

Active Components

elec

Find Active Components from the best B2B online marketplace. Find a reliable Active Components supplier, vendor, manufacturer or distributor to get free quote on HKTDC Sourcing.

Active Components Suppliers and Manufacturers

Ningbo Pdlux Electronics Technology Co Ltd

This is a high-frequency microwave sensor with a waterproof housing. It is professionally engineered to deliver reliable and stable performance. This high-quality microwave sensor is easy to install. Power Source100-240VACPower Frequency50/60HzRated Load60W Max. (any load)LED Rated Load1WLED Quantity8 PCS (2835)HF System5.8GHz CW Electric Wave, ISM BandDetection Angle360°Detection Range2m-4m-6m-8m (radii.) (adjustable)Time Setting5sec-1min-3min-8min (adjustable)Light-control&lt;20LUXPower Consumption&lt;0.5WInstallationCeiling Mounting, Wall MountingWorking Temperature-15℃ ~ +70℃Lamp Socket TypeE27 (standard)  

PDLUX PDDT-V01 Microwave Sensor Switch 

Shenzhen Merrytek Technology Co Ltd

 	 Operating voltage ：120~277Vac,&nbsp; 50Hz/60Hz 	 Rated load ：&nbsp;400W@120Vac, 800W@220-277Vac (inductive),&nbsp; 800W@120Vac, 1200W@220-277Vac (resistive) 	 HF system ：&nbsp;5.8GHz&plusmn;75MHz, ISM wave band 	 Transmitting power ：&nbsp;&lt;0.5mW 	 Power consumption ：&nbsp;&le;0.8W(standby), &lt;1.5W(operation) 	 Detection zone ：&nbsp;Max.(D x H): 16m x 15m 	 Detection sensitivity ：&nbsp;100% / 50% 	 Hold time ：&nbsp;5s / 30s / 90s / 3min / 20min / 30min 	 Daylight sensor ：&nbsp;50lux / 100lux / 200lux / Disable 	 Stand-by dimming level ：&nbsp;10% / 20% / 30% / 50% 	 Mounting height :&nbsp;15m Max. 	 Motion detection :&nbsp;0.5~3m/s 	 Detection angle :&nbsp;150&deg;(wall installation),360&deg;(ceiling installation) 	 Operating temperature :&nbsp;-35℃~70℃  

Microwave Motion Sensor

Power Source100-277VACPower Frequency50/60HzRated Load800W Max.(100-127VAC)1500W Max.(220-240VAC)1800W (277VAC)Light-control＜5Lux-20Lux(adjustable)Power consumption＜0.5W

Photoelectric sensor

Power Source100-240VACPower Frequency50/60HzRated Load0.5A Max. tungsten.fluorescent &amp; LEDTime Setting1 minLight-control＜10LUXDetection Angle360°Detection range8m(dia.)(22°C）Anti-surge current100A/200uSInstallation height2.5~3.5mWorking temperature-10°C~+40°CWorking humidity＜95%RH 

Infrared Motion Sensor

This is a daylight sensor that is certified to meet various safety standards. It is made of quality material for excellent wear resistance. This daylight sensor is an ideal component for lighting products. 	 With ambient light dependent control. 	 Directly connected to 1-10V interface. 	 Set target light level by the potentiometer.  

Daylight Sensor

Ningbo Hi-Tech Park Sensiti Science & Technology Development Co.,Ltd.

 This sensor lamp is well manufactured with a PIR motion sensor. It diffuses ambient illumination with an ultra-bright bulb. It provides your home with a more efficient, cost-saving lighting solution. 
 
  Easy to install. 
  A white round base.

 &nbsp; 
 

PIR Motion Sensor Lamp

Freelux B. V.

 The smart light sensor is designed to control lamps in an effective way. The sensor can turn several lights on when it starts getting dark. The sensor is easy to fix with high performance. 
 
  Turns the lights off at the end of the evening. 
  Each lamp will be one time turned on randomly after bedtime. 
  No programming needed. 
 
 &nbsp; 

Smart Light Sensor

Jiashan Changshun Electronics Factory

 	 Item number:CH-PIR-15A 	 Solar panel:165cm x 135cm,Amorphous 	 Lithium battery,3.7V,2000mAh 	 LED Lamp:60SMDx0.066W/Epistar Chip &nbsp;&nbsp; 	 LED Luminous:7Lumen/LED 	 LED Color Temperture:Cool White:5500-6000K;Warm White:2700-3200K 	 Lamp &nbsp;Luminous Flux:420LM 	 Material:ABS + aluminum die casting 	 Cable Length:3m waterproof 	 Operation:Digital PIR motion sensor &nbsp;&nbsp; 	 Working Time:a:Press &quot;Time&quot;button,the delay time can be adjusted from 10s-99s. &nbsp;b:Press &quot;Lux&quot;button,the starting environmental lux can be adjust from 20lux(darkness) to 999lux(day). &nbsp;c:LCD displays the &quot;Time&quot;and &quot;Lux&quot;increasing or reducing and the battery current capacity.&nbsp; &nbsp; 	 Charging Time:empty battery needs 15hours to get full charged 	 Sensor area 10m and 180 degree angle 	 Application:Home security &nbsp;  

Solar Digital Sensor Light 

Hytronik Ind'l Ltd

   This sensor basically has the same spec and function as the standard version with 1 added function: condominium control or multi control.   In many cases, several sensors are connected together to control the same fixture or to trigger on each other, the sudden on/off of the lamp tube causes magnetic pulse.   Which may mis-trigger the sensor, Hytronik condominium sensor is specially designed for that application.  

Condominium Version Microwave Motion Sensor Detector

 With both 1-10V output signal and 220-240V signal, this advanced version microwave motion sensor detector can switch on or off any lighting applications and dim fluorescent lamps, HID lamps as well as LED lamps. It uses microwave motion detection and has a maximum detection range of 8m diameter and 10m height. This sensor detector is the ideal choice for your lighting applications.    1-10V output signal and 220-240V signal.   Can switch on/off any lighting applications and dim fluorescent lamps, HID lamps as well as LED lamps.   Operating voltage: 220-240V+/-10%; 120-277V+/-10%.   Switched power: HC003V&mdash;800W; HC403V&mdash;800/1200W.   Standby power: 0.6W (standby), 1.2W (operation).   Detection area: 10/30/50/75/100%, can be customized.   Hold Time: 5s/30s/180s/300s/15min/25min, can be customized.   Daylight threshold: 2-2000 lux, daylight/twilight/darkness, can be customized.   Sensor principle: microwave motion detector.   Microwave frequency: 5.8GHz+/-75MHz.   Microwave power: &lt;1mW.   Detection range: max. (diameter, height) 8m, 10m.   Detection angle: 30&mdash;150 degree.   Motion detection: 1-20km/h (&lt;3m mounting height); 1-200km/h (&gt;5m height).   Mounting height: 0.5m - 5m.   Operating temperature: -35~70 degree.   IP rating: IP 20 (mounting inside a lamp); IP65 (mounting in Hytronik special box).   
&nbsp; 

Motion Sensor Detector

 With the function of switching on and off halogen transformer non-dimmable fluorescent ballast or non-dimmable LED drivers, this condominium version microwave motion sensor detector has the same spec and works just like a standard version microwave motion sensor detector. What makes it different is the additional function of condominium control or multi control. When several sensors are connected together to control the same fixture or trigger on each other, the sudden on/off of the lamp tube causes magnetic pulse which may mis-trigger the sensor. This condominium sensor is specially designed to handle this issue.    Switching on/off halogen transformer non-dimmable fluorescent ballast or non-dimmable LED drivers.   Same spec and function as the standard version microwave motion sensor detector.   Additional function of condominium control or multi control.   Handles magnetic pulse which may mis-trigger the sensor.  

Microwave Motion Sensor Detector

Shanghai Yucheng Industrial Company Limited

This infrared sensor features a recessed design for easy ceiling mounting. The finely engineered sensor can effectively detect the heat emitted by human body motion within the detection area. It is fitted with a 600W filament bulb for illumination.

 
  Operating voltage: 220-240V/AC. 
  Power frequency: 50Hz. 
  Rated load (max): 600W (filament lamp). 
  Detection distance: &gt;6M (&lt;22&deg;C). 
  Detection range: 360 degree. 
 

Infrared Sensor

Genicom Co Ltd

Feature: 	 AlGaInN-based UV sensor. 	 Housing type. 	 Window: quartz glass. 	 Case material: STS 316-L (1.4404). 	 Water resistance: 10 bar. 	 Cable length: 5m (standard).  Specification: 	 Power supply. 	 DC 9~26V. 	 Output. 	 DC current: 4~20mA. 	 Operating temperature: -30~85&deg;C.  Application: 	 UV water sterilization. 	 UV lamp/UV LED monitoring.  

UV Probe (LW6)

Feature: 	 AlGaN based UVC sensor. 	 Stainless steel case with quartz window. 	 Voltage output. 	 Water proof (10 bar). 	 Thread for mounting: P/T &frac14;&quot;. 	 Power supply: DC 5V. 	 Output: DC 0~5V. 	 Spectral detection range: 220~280nm. 	 Detection power range: 1, 10, 100, 1000mW/cm2. 	 Operating temperature: -30~85&deg;C.  Application: 	 UV water sterilization. 	 UV lamp/LED monitoring.  

UV Probe Water 

 If you need a sensor detector to switch on and switch off your halogen transformer non-dimmable fluorescent ballast or non-dimmable LED drivers, this standard version microwave motion sensor detector is the device you are looking for. Simple and practical, this sensor detects motion with microwave and has a maximum detection range of 8m diameter and 10m height. Due to the inrush current, this detector has a limit of maximum load.    Operating voltage: 220-240V+/-10%; 120V-277V+/-10%.   Switched power: HC001S&mdash;400W; HC401S&mdash;800/1200W.   Standby power: 0.6W (standby), 1.2W (operation).   Detection area: 10/30/50/75/100%, can be customized.   Hold time: 5s/30s/180s/300s/15min/25min, can be customized.   Daylight threshold: 2-500 lux, daylight/twilight/darkness, can be customized.   Sensor principle: microwave motion detector.   Microwave frequency: 5.8GHz +/-75MHz.   Microwave power: &lt;1mW.   Detection range: max. (diameter, height) 8m, 10m.   Detection angle: 30&mdash;150 degree.   Motion detection: 1-20km/h (&lt;3m mounting height); 1-200km/h (&gt;5m height).   Mounting height: 0.5m - 10m.   Operating temperature: -35~70 degree.   IP rating: IP 20 (mounting inside a lamp); IP65 (mounting in Hytronik special box).  

Standard Motion Sensor Detector

 This economy version microwave motion sensor detector functions as well as the standard version microwave motion sensor detector. It can be used to switch on and switch off your halogen transformer non-dimmable fluorescent ballast or non-dimmable LED drivers. This detector is the simplified economy model to the standard version and it is designed for built-in compact lighting fixtures for indoor application.    Exactly function as the standard version microwave motion sensor detector.   Simplified economy model.   Designed for built-in compact lighting fixtures for indoor application.   Operating voltage: HC008S&mdash;220-240V; HC108S&mdash;120V.   Switched power: HC008S&mdash;400W; HC108S&mdash;200W.   Standby power: 0.6W (standby), 1.2W (operation).   Detection area: 10/30/50/75/100%, can be customized.   Hold time: 5s/30s/180s/300s/15min/25min, can be customized.   Daylight threshold: 2-500 lux, daylight/twilight/darkness, can be customized.   Sensor principle: microwave motion detector.   Microwave frequency: 5.8GHz +/-75MHz.   Microwave power: &lt;1mW.   Detection range: max. (diameter, height) 8m, 5m.   Detection angle: 30&mdash;150 degree.   Motion detection: 1-20km/h (&lt;3m mounting height); 1-200km/h (&gt;5m height).   Mounting height: 0.5~5m.   Operating temperature: -10~60 degree.   IP rating: IP 20 (mounting inside a lamp); IP65 (mounting in Hytronik special box).
 &nbsp;  

   This sensor is for the external installation. To attach to the outside of fixture (aluminum Louvre blocks and interfere microwave detection.).   The sensor can switch on/off halogen transformer, non-dimmable fluorescent ballast, non-dimmable LED drivers. However there is a limit of max. load due to the inrush current.  Technical data:
   Operating voltage: 220-240V+/-10%; 120-277V+/-10%.   Switched power: HC001S&mdash;400W; HC401S&mdash;800/1200W.   Standby power: 0.6W (standby), 1.2W (operation).   Detection area: 10/30/50/75/100%, can be customized.   Hold time: 5s/30s/180s/300s/15min/25min, can be customized.   Daylight threshold: 2-500 lux, daylight/twilight/darkness, can be customized.   Sensor principle: microwave motion detector.   Microwave frequency: 5.8GHz+/-75MHz.   Microwave power: &lt;1mW.   Detection range: max. (diameter, height) 8m, 10m.   Detection angle: 30&mdash;150 degree.   Motion detection: 1-20km/h (&lt;3m mounting height); 1-200km/h (&gt;5m height).   Mounting height: 0.5~100m.   Operating temperature: -35~70 degree.   IP rating: IP 20 (mounting inside a lamp); IP65 (mounting in Hytronik special box).  

Attachable Version Microwave Motion Sensor Detector

   This sensor has exactly the same function as the economy version. It is a simplified cost effective model to the standard version and it is designed for built-in compact lighting fixtures for consumer home lighting application.  Technical data: 
   Operating voltage: HC004S&mdash;220-240V; HC104S&mdash;120V.   Switched power: HC004S&mdash;400W; HC104S&mdash;200W.   Standby power: 0.6W (standby), 1.2W (operation).   Detection area: 10/50/100%, can be customized.   Hold time: 5s/45s/1min/3min/5min, can be customized.   Daylight threshold: 5-50 lux, daylight/twilight/darkness, can be customized.   Sensor principle: microwave motion detector.   Microwave frequency: 5.8GHz+/-75MHz.   Microwave power: &lt;1mW.   Detection range: max. (diameter, height) 20m, 3m.   Detection angle: 30&mdash;170 degree.   Motion detection: 1-20km/h (&lt;3m mounting height); 1-200km/h (&gt;5m height).   Mounting height: 0.5~5m.   Operating temperature: -10~60 degree.   IP rating: IP 20 (mounting inside a lamp); IP65 (mounting in Hytronik special box).  

Domestic Version Microwave Motion Sensor Detector

   This sensor has exactly the same function as the standard version. It is a simplified economy model to the standard version and it is designed for built-in compact lighting fixtures for indoor application.  Technical data:
   Operating voltage: HC008S&mdash;220-240V; HC108S&mdash;120V.   Switched power: HC008S&mdash;400W; HC108S&mdash;200W.   Standby power: 0.6W (standby), 1.2W (operation).   Detection area: 10/30/50/75/100%, can be customized.   Hold time: 5s/30s/180s/300s/15min/25min, can be customized.   Daylight threshold: 2-500 lux, daylight/twilight/darkness, can be customized.   Sensor principle: microwave motion detector.   Microwave frequency: 5.8GHz+/-75MHz.   Microwave power: &lt;1mW.   Detection range: max. (diameter, height) 8m, 5m.   Detection angle: 30&mdash;150 degree.   Motion detection: 1-20km/h (&lt;3m mounting height); 1-200km/h (&gt;5m height).   Mounting height: 0.5~5m.   Operating temperature: -10~60 degree.   IP rating: IP 20 (mounting inside a lamp); IP65 (mounting in Hytronik special box).  

Economy Version Microwave Motion Sensor Detector

   The sensor can switch on/off halogen transformer non-dimmable fluorescent ballast, non-dimmable LED drivers. However there is a limit of max. load due to the inrush current.  Technical data:
   Operating voltage: 220-240V+/-10%; 120V-277V+/-10%.   Switched power: HC001S&mdash;400W; HC401S&mdash;800/1200W.   Standby power: 0.6W (standby), 1.2W (operation).   Detection area: 10/30/50/75/100%, can be customized.   Hold time: 5s/30s/180s/300s/15min/25min, can be customized.   Daylight threshold: 2-500 lux, daylight/twilight/darkness, can be customized.   Sensor principle: microwave motion detector.   Microwave frequency: 5.8GHz +/-75MHz.   Microwave power: &lt;1mW.   Detection range: max. (diameter, height) 8m, 10m.   Detection angle: 30&mdash;150 degree.   Motion detection: 1-20km/h (&lt;3m mounting height); 1-200km/h (&gt;5m height).   Mounting height: 0.5~10m.   Operating temperature: -35~70 degree.   IP rating: IP 20 (mounting inside a lamp); IP65 (mounting in Hytronik special box).  

Standard Version Microwave Motion Sensor Detector

TELTRON

This is a power saving motion detector. The motion detector can be applicable to all kinds of lamps. The power saving switch will only turn on the light if there are moving human beings within 20m and it is insensitive to dust, light and ambient temperature.
    Attached CdS detects if environmental light is dark enough for a necessary lighting  Parallel circuit installation is possible if the total power consumption is less than 1100W  In case of higher electricity consumption, an external solid state relay switch should do  Adjustable detection range and response level  Motion detection coverage can be widened by parallel connection of motion sensors  

Power Saving Motion Sensor

Beyond Group (HK) Co Ltd

Solar Wall Light with PIR Sensor

Solar Wall Light With PIR Sensor

Dongguan Evolt Electronics Co Ltd

 	 For use with DALI version 2 application controller; Light control based on ambient light and motion detection 	 Available as surface&amp; recessed mount, and as a plug_in moudle; Multi-master compatible/ Multiple control devices per line 	 Control scenes/ groups/ actions/ events with a zen control system; Suitable for up to 32 devices per DALI line.  

My Sourcing