Baby Care & Nursery

Bestworld Corp Ltd

Specifications :Product name: Vacuum sealing machineVacuum method: electricControl mode: button typeSingle use time: 1-60SStandby time: 30 daysAir pump capacity: 500CCVacuum flow: 3.5LInspiratory MPa:-60kpaAir pump motor:370Air pump motor voltage: 7.4VNoise:&lt;60dbPressure relief method: solenoid valve automatically resetsDisplay mode: battery percentage displayBattery: built-in battery 1200-2000mAHPower supply voltage: DC5V/1A Type-CPower:20W 

Electric vacuum bottle sealer

Adekom (Asia Pacific) Ltd

 Specification of High Pressure Reciprocating Piston Air Compressor 

1.Air capacity:1.5-1.3Nm3/min
2.Discharge pressure: 150-350bar(g)
3.Level of compression:4
4.Cooling method: Air-Cooled
5.Motor power: 15x2
6.Power Supply: 380V/50-60HZ
7.Runnig speed: 630r.p.m

 Features of Reciprocating High Pressure Piston Air Compressor  	 The crankshaft adopts single cantilever support structure, which featureexcellent installation, detachment and maintenance. Main bearingsapply precise columnroller bearings, and special-made needle bearings with the superior loading capacity are used on both ends of the connecting rod. No bearing bush is applied to the whole machine, low friction consumption, strong ability of resistingtough conditions. 	 ADEKOM unique inertia moment balance design and workmanship guarantee extremely low vibration on the whole machine. 	 The inhalation unit adopts ADEKOM patented techniques- impedance compound suction muffler and low-side inlet disposition.Low suction temperature and noise.&nbsp; 	 High efficiency, energy conservation and long working life gas valve. ADEKOM &quot;polygon cylindrical straight-flow valve&quot;adopted at the first stage and second stage; highly efficient combination ring valve, which is researched and developed by ADEKOM after many years operation test and optimization, applied to the third stage and fourth stage.&nbsp; 	 Drainage system employ a masterly combination of Adekom patent large size air-controlling drain valve, solenoid discharge valve, whirlwind air&amp; water separator and electrical timing controller to ensure a swift, thorough and reliable sewage disposal. 	 Redundancy control technology ensuring an unloading start at zero pressure. The diaphragm valve set at the suction port will close air intake within several seconds when the machine starts; all valves for releasing air and pollution will open when machine is at the state of on/off to guarantee zero pressure inside.&nbsp;  

Reciprocating High Pressure Piston Air Compressor

MGM Industries & Company

Flow rate  : 0.5-3L/min adjustable The maximum amount of oxygen  : 3L/min≥90% Power  : 195W Weight  : 8kg Noise  : ≤45decibel Size  : 367L*208W*345H Package size : 400L*260W*370H  NINE CHARACTERISTICS 1. Automatic alarm detection system and photosensitive LED display, oxygen purity monitoring, and cumulative timing, power failure alarm and other functions, easy to operate. 2. Zero friction solenoid valve design, performance and life are more stable and durable. 3. Special high-efficiency Lithium Molecule (Z12-07), 30,000 hours of operation, stable performance and guaranteed. 4. Fully modularized internal design, integrated oxygen module system, ensure quick and convenient installation and maintenance. 5. High-efficiency and low-power design. Oxygen is produced within three minutes after power-on, and the oxygen purity is up to 93%±3%. 6. HEAP high-efficiency filter, can be used continuously for 5000 hours. 7. HEAP high-efficiency bacterial filter (0.3um) to ensure that the oxygen produced is pure and sterile, in line with PM2.5 requirements. 8. Multi-level noise reduction, low noise operation below 40dB. 9. Oil-free patented compressor, lifetime is over 25000 hours.   

Medical Oxygen Concentrator 

Flow rate  : 3L/min adjustable Purity  : 93%±3% Power supply :  220 V/50Hz or 110V/60Hz Power consumption  : 195VA Noise  : 40dB Operation environment :  Temperature: 5℃-40℃ Humidity≤80%                       Atmospheric pressure: 86kPa-106kPa Dimension  : 372x267x405mm Packing Size :  445x390x755mm Net Weight  : 8.5kgs Gross Weight :  9.8kgs Compressor :  Germany imported pure copper oil free compressor Molecular Sieve :  Z12-07, USA imported Filter :  USA imported HEAP high efficiency filter Alarm  : Power failure, Over-heat, Low O2 purity alarm Accessories :  Nasal Cannula, adult mask, humidifier bottle, Oxygen tube, Nebulizer cup(optional) Warranty : Compressor 3 years, Other parts 1 year  NINE CHARACTERISTICS 1. Automatic alarm detection system and photosensitive LED display, oxygen purity monitoring, and cumulative timing, power failure alarm   and other functions, Easy to operate. 2. Zero friction solenoid valve design, performance and life are more stable and durable. 3. Special high-efficiency Lithium Molecule (Z12-07), 30,000 hours of operation, stable performance and guaranteed. 4. Fully modularized internal design, integrated oxygen module system, ensure quick and convenient installation and maintenance. 5. High-efficiency and low-power design. Oxygen is produced within three minutes after power-on, and the oxygen purity is up to 93%±3%. 6. HEAP high efficiency filter, can be used continuously for 5000 hours. 7. HEAP high-efficiency bacterial filter (0.3um) to ensure that the oxygen produced is pure and sterile, in line with PM2.5 requirements. 8. Multi-level noise reduction, low noise operation below 40dB. 9. Oil-free patented compressor, lifetime is over 25000 hours. YS-301 Medical Oxygen Concentrator Overview  PRODUCT OVERVIEW Use period: 8000 hours (cumulative use) or 5 years Factory number, production date: see product label Product structure: Oxygen generator, oxygen suction tube, humidification bottle, oxygen concentration monitor and an atomizing device. An oxygen generator includ-ing compressor, molecular sieve adsorption tower, solenoid valve, control circuit components and flow meter. Scope of application: Use air as raw material, use molecular sieve to transform pressure attach process to produce oxygen with a concentration range of 90%~96% 

YS-301 Medical Oxygen Concentrator

SPECIFICATION Flow rate :  0.5-5L/min adjustable The maximum amount of oxygen  :  5L/min≥90% Power  :  300W Weight  :  14kg Noise  :  ≤45decibel Size  :  373L*322W*605H Package size  :  410L*360W*605H  NINE CHARACTERISTICS 1. Automatic alarm detection system and photosensitive LED display, oxygen purity monitoring, and cumulative timing, power failure alarm and other functions, Easy to operate. 2. Zero friction solenoid valve design, performance and life are more stable and durable. 3. Special high-efficiency Lithium Molecule (Z12-07), 30,000 hours of operation, stable performance and guaranteed. 4. Fully modularized internal design, integrated oxygen module system, ensure quick and convenient installation and maintenance. 5. High-efficiency and low-power design. Oxygen is produced within three minutes after power-on, and the oxygen purity is up to 93%±3%. 6. HEAP high efficiency filter, can be used continuously for 5000 hours. 7. HEAP high-efficiency bacterial filter (0.3um) to ensure that the oxygen produced is pure and sterile, in line with PM2.5 requirements. 8. Multi-level noise reduction, low noise operation below 40dB. 9. Oil-free patented compressor, lifetime is over 25000 hours.  PRODUCT OVERVIEW Product Name: Small medical oxygen concentrator Models: YS-100, YS-100Y, YS-100YW; YS-300, YS-300Y, YS-300YW, YS-500, YS-500Y, YS-500YW Production license No.: Wan Medical Products Administration License No. 20160040 Product registration certificate No.: Wan appliance register authorization No. 20162540272 Product technical requirement No.: Wan appliance register authorization No. 20162540272 Use period: 8000 hours (cumulative use) or 5 years Factory number, production date: see product label Product structure: Oxygen generator, oxygen suction tube, humidification bottle, oxygen concentration monitor and an atomizing device. An oxygen generator including compressor, molecular sieve adsorption tower, solenoid valve, control circuit components and flow meter. Scope of application: Use air as raw material, use molecular sieve to transform pressure attach process to produce oxygen with a concentration range of 90% ~ 96% 

YS-500 Medical Oxygen Concentrator Specification

Flow rate:10L/min adjustable Purity:93%±3% Power supply:220 V/50Hz or 110V/60Hz Power consumption:850VA Noise:60dB Operation environmentTemperature : 5℃-40℃ Humidity≤80%                                  Atmospheric pressure: 86kPa-106kPa Dimension:335x320x620mm Packing Size:445x390x755mm Net Weight:19.2kgs Gross Weight:21.7kgs Compressor:Germany imported pure copper oil free compressor Molecular Sieve : Z12-07, USA imported Filter : USA imported HEAP high efficiency filter Alarm : Power failure, Over-heat, Low O2 purity alarm Accessories : Nasal Cannula, adult mask, humidifier bottle, Oxygen tube, Nebulizer cup(optional)  NINE CHARACTERISTICS 1. Automatic alarm detection system and photosensitive LED display, oxygen purity monitoring, and cumulative timing, power failure   alarm and other functions, Easy to operate. 2. Zero friction solenoid valve design, performance and life are more stable and durable. 3. Special high-efficiency Lithium Molecule (Z12-07), 30,000 hours of operation, stable performance and guaranteed. 4. Fully modularized internal design, integrated oxygen module system, ensure quick and convenient installation and maintenance. 5. High-efficiency and low-power design. Oxygen is produced within three minutes after power-on, and the oxygen purity is up to 93%±3%. 6. HEAP high efficiency filter, can be used continuously for 5000 hours. 7. HEAP high-efficiency bacterial filter (0.3um) to ensure that the oxygen produced is pure and sterile, in line with PM2.5 requirements. 8. Multi-level noise reduction, low noise operation below 40dB. 9. Oil-free patented compressor, lifetime is over 25000 hours.  PRODUCT OVERVIEW Product Name: Small medical oxygen concentrator Models: YS-100, YS-100Y, YS-100YW; YS-300, YS-300Y, YS-300YW, YS-500, YS-500Y, YS-500YW Production license No.: Wan Medical Products Administration License No. 20160040 Product registration certificate No.: Wan appliance register authorization No. 20162540272 Product technical requirement No.: Wan appliance register authorization No. 20162540272 Use period: 8000 hours (cumulative use) or 5 years Factory number, production date: see product label Product structure: Oxygen generator, oxygen suction tube, humidification bottle, oxygen concentration monitor and an atomizing device. An oxygen generator includ-ing compressor, molecular sieve adsorption tower, solenoid valve, control circuit components and flow meter. Scope of application: Use air as raw material, use molecular sieve to transform pressure attach process to produce oxygen with a concentration range of 90% ~ 96% 

YS-800 Medical Oxygen Concentrator Specification

Flow rate: 5L/min adjustable Purity: 93%±3% Power supply: 220 V/50Hz or 110V/60Hz Power consumption: 300VA Noise: 52dB Operation environment: Temperature: 5℃-40℃ Humidity≤80%                     Atmospheric pressure: 86kPa-106kPa Dimension: 335x320x620mm Packing Size: 445x390x755mm Net Weight: 16.2kgs Gross Weight: 18.7kgs Compressor: Germany imported pure copper oil free compressor Molecular Sieve: Z12-07, USA imported Filter: USA imported HEAP high efficiency filter Alarm: Power failure, Over-heat, Low O2 purity alarm Accessories: Nasal Cannula, adult mask, humidifier bottle, Oxygen tube, Nebulizer cup(optional)  NINE CHARACTERISTICS 1. Automatic alarm detection system and photosensitive LED display, oxygen purity monitoring, and cumulative timing, power failure  alarm and other functions, Easy to operate. 2. Zero friction solenoid valve design, performance and life are more stable and durable. 3. Special high-efficiency Lithium Molecule (Z12-07), 30,000 hours of operation, stable performance and guaranteed. 4. Fully modularized internal design, integrated oxygen module system, ensure quick and convenient installation and maintenance. 5. High-efficiency and low-power design. Oxygen is produced within three minutes after power-on, and the oxygen purity is up to 93%±3%. 6. HEAP high efficiency filter, can be used continuously for 5000 hours. 7. HEAP high-efficiency bacterial filter (0.3um) to ensure that the oxygen produced is pure and sterile, in line with PM2.5 requirements. 8. Multi-level noise reduction, low noise operation below 40dB. 9. Oil-free patented compressor, lifetime is over 25000 hours.  PRODUCT OVERVIEW Product Name: Small medical oxygen concentrator Models: YS-100, YS-100Y, YS-100YW; YS-300, YS-300Y, YS-300YW, YS-500, YS-500Y, YS-500YW Production license No.: Wan Medical Products Administration License No. 20160040 Product registration certificate No.: Wan appliance register authorization No. 20162540272 Product technical requirement No.: Wan appliance register authorization No. 20162540272 Use period: 8000 hours (cumulative use) or 5 years Factory number, production date: see product label Product structure: Oxygen generator, oxygen suction tube, humidification bottle, oxygen concentration monitor and an atomizing device. An oxygen generator includ-ing compressor, molecular sieve adsorption tower, solenoid valve, control circuit components and flow meter. Scope of application: Use air as raw material, use molecular sieve to transform pressure attach process to produce oxygen with a concentration range of 90% ～96% 

YS-501 Medical Oxygen Concentrator

Yueqing Kanghong Electronic Co., Ltd.

 This is a solenoid valve with a built-in filter screen. Professionally designed, this solenoid valve has&nbsp;a non-return function. This high quality solenoid valve is durable and easy to use. 
 
  Non-return function. 
  Built-in filter screen. 
  Inserting type. 
 

Solenoid Valve

 This is a solenoid valve with a pilot action way. Professionally designed, this solenoid valve can work under a wide range of pressure levels. This high quality solenoid valve is durable and easy to use. 
 
  Action way: pilot type. 
  Working pressure: 0.02MPa-0.8MPa. 
  Connection way: four-tenths male thread. 
 

SHENZHEN SKOOCOM ELECTRONIC CO.,LTD

This is a mini solenoid valve with a long lifespan. It features low noise and low energy consumption design. This solenoid valve ensures high-quality performance.
 
  Apply to air. 
  Available in assorted models. 
 

CEME Spa

This is a series 88 solenoid valve. The valve is supplied with a three-pole plug connector (UNI ISO 6592). It is suitable for industrial systems. 
    Sealing: NBR on request FPM, EPDM, EPDM-KTW  Body: brass  Internal parts: stainless steel  Fluids: water, air  

Ningbo JLT Electric Co., Ltd.

The solenoid valve offers reliable performance over years. The certification from a recognized institution ensures high safety. This solenoid valve is a great choice for your machine designs.

 
  Voltage:&nbsp;24V. 
  Wattage:&nbsp;9W. 
  CE&nbsp;certified. 
 

This is a series 4413 solenoid valve. It has 2/2 way angle valve N.C. The product has direct control R 1/8 R 1/8 (conical gas) outlet
 hose bib: orifice size DN 2,0 with safety
 valve. 
 
    AC: 230V, 50Hz  Class: H  

 Featured is a&nbsp;solenoid valve with a quality construction.&nbsp;It provides outstanding performance with exceptional stability. The high durability makes it stand above the rest. 
 
  Voltage:&nbsp;230V, AC. 
  CE&nbsp;certified. 
 

This solenoid valve is designed specifically for coffee machines (HF series). It is a component for coffee machine's vibration pump. The component is made of high quality material. 
   Voltage (HF): 100V, 120V, 220V, 230V   Voltage (HF2): 120V , 230V   Class: F  

Xiamen Conjoin Electronics Technology Co., Ltd

 	 Solenoid valve: rated load 40~1,000kPa. 	 Rated voltage: 3~24V DC. 	 Customization based on specific customer requirements available.  

CJV23 Solenoid Valve

Ningbo Jiayin Electro Mechanical Technology Co., Ltd.

 Featured is a&nbsp;high-quality solenoid valve&nbsp;with stable and reliable performance. The robust construction guarantees lasting durability to stand daily wear and tear. It is perfect for a wide range of electronic applications.    Power supply: AC 230V, 50Hz, 9-12VA.   ED: max. 100%.  

Tenders G & M Co Ltd

Operating with an electromechanical principle, this solenoid valve regulates the transfer of liquid and gas. This valve allows you to conveniently shut off, release and mix fluids. This solenoid valve accommodates various uses in hydraulic systems and sprinkle systems.

 
  Versatile design. 
  Consists of a solenoid and a valve.

 &nbsp; 
 

 Featured here is&nbsp;a&nbsp;high-quality solenoid valve that offers reliable performance over years. It has a robust construction to stand daily tear and wear. This solenoid valve is a great choice for your machine designs. 
 
  Action method: straight movement. 
  Form: normally closed. 
  Pressure difference: 0.02-1.0Mpa. 
  Diameter: 1.5-3mm. 
  Working medium: water, steam. 
  Fluid temperature: 0-160 degrees Celsius. 
  AMB temperature: 0-140 degrees Celsius. 
  Power supply: AC 230V, 50Hz, 9VA. 
  Protection degree: IP00. 
  Insulation class: H. 
  Install method: direct control ZG 1/8&quot; conical outlet. 
 

Ningbo Bosen Fala Capacitor Co.,Ltd

This is emergency solenoid valve use for GAS pipe link gas detector, the detector will send signal to solenoid valves by connecting cables, and solenoid valves will close when LPG or LNG leakaging in the house.

With wrought aluminum or brass alloy for body

More size: 1/4inch (10mm) 1/2inch(15mm) and 3/4inch(20mm) 1inch(25mm) 1 1/4inch(32mm)
The details as follows:
Technical Data
*Suitable gas types: town gas *Closing modes: current impulse or manual
*Body: wrought aluminum or brass alloy *Driving Voltage: DC 9-24V
*Sealing material: NBR rubber
*Close time :&lt;1sec
*Operation temperature:-10~50&deg;C
*Explosion proof mark: Exmb ||T4
*Pressure max :150kpa
*Lead wire :0.4m
*Connection: G1/4&quot;,G1/2&quot;,G3/4&quot;,G1&quot;, G1 1/4&quot;
*Turn on :manual&nbsp; .

LOWEST PRICE SUPPLY.
We will supply best quality, fast delivery time, best service and reasonable price to establish long cooperate with you...OEM and ODM are welcome.
PLEASE NOTE: the fast delivery time, such as 20000pcs will finish them with in 1 month when we have agreement.


We will supply free sample to let you check the quality first. CE approved
Welcome to send inquiry, we will send our catalog to you by email.


&nbsp;

Gas Emergency Solenoid Valve

High Intelligence Technology Limited

This solenoid valve is professionally engineered for excellent durability. The iron housing is tough and robust. It is compatible with a wide range of medical equipment.&nbsp;

 
  Material:&nbsp;iron. 
  Can be custom-made. 
 

Showcased is a round-shape solenoid valve made of solid metal. The protruding center part is laser cut with round patterns. The surface is finely polished with a burnished touch.
 
  Wide application. 
  Available in various designs. 
 

 The high-quality solenoid valve&nbsp;offers reliable performance over years.&nbsp;The robust construction promises lasting durability.&nbsp;This solenoid valve is a great choice for your machine designs. 
 
  Action method: straight movement. 
  Pressure difference: 0.02-1.0Mpa. 
  Working medium: water, steam. 
  AMB temperature: 0-140 degrees Celsius. 
  Protection degree: IP00. 
  Install method: direct control ZG 1/8&quot; conical outlet. 
  Form: normally closed. 
  Diameter: 1.5-2mm. 
  Fluid temperature: 0-160 degrees Celsius. 
  Power supply: AC 230V, 50Hz, 9VA. 
  Insulation class: H. 
 

 The high-quality solenoid valve boasts a rugged construction for years of guaranteed service.&nbsp;The H-class insulation&nbsp;ensures reliable application.&nbsp;This solenoid valve is a great choice for your machine designs. 
 
  Action method: straight movement. 
  Pressure difference: 0.02-1.0Mpa. 
  Working medium: water, steam. 
  AMB. temperature: 0-140 degrees Celsius. 
  Protection degree: IP00. 
  Install method: direct control ZG 1/8&quot; conical outlet. 
  Form: normally closed. 
  Diameter: 1.5-3mm. 
  Fluid temperature: 0-160 degrees Celsius. 
  Power supply: AC 230V, 50Hz, 9VA. 
  Insulation class: H. 
 

My Sourcing

Unfollow the following supplier?

Unfollow the following supplier?