Automobile & Transport

Find Automobile & Transport from the best B2B online marketplace. Find a reliable Automobile & Transport supplier, vendor, manufacturer or distributor to get free quote on HKTDC Sourcing.

Automobile & Transport Suppliers and Manufacturers

Automobile Electronics

Find Automobile Electronics from the best B2B online marketplace. Find a reliable Automobile Electronics supplier, vendor, manufacturer or distributor to get free quote on HKTDC Sourcing.

Automobile Electronics Suppliers and Manufacturers

Car Amplifiers

automobile

Find Car Amplifiers from the best B2B online marketplace. Find a reliable Car Amplifiers supplier, vendor, manufacturer or distributor to get free quote on HKTDC Sourcing.

Car Amplifiers Suppliers and Manufacturers

Shenzhen Music Way Technology Co.,Ltd.

M4 4-Channel Class D Amplifier with 6-Channel DSP · 340 Watts RMS  Features • Intelligent High Level Input (Error Protection System) • Start-Stop ready, Auto Turn-On • Burr-Brown converters (PCM3168A) and Analog Devices DSP(ADAU1452) • 32bit, 295MIPS DSP technology, controllable via new V3 PC software or Tunest App • Signal-to-noise Ratio ≥90dB • Frequency Response 15 Hz – 22 kHz (-3dB) • THD ≤0,1% (1 kHz, 4Ω, 90% Power) • Controllable AUX input sensitivity, Clipping LEDs • Plug+Play with vehicle-specific cable sets  Specification Power output(RMS) @ 14.4 VDC, 1% THD: 4CH @ 4 Ω：45 W x 4 4CH @ 2 Ω：65 W x4 2CH - (bridged 1/2; 3/4) @ 4 Ω: 145 W x 2 4 x High Level Input,10V RMS 2 x AUX/RCA Input, 0.3-2.6V RMS 4 x Loudspeaker Output amplified 6 x Pre-Amplifier Output/RCA (configurable via DSP) Dimensions: 165 x 41 x 150 mm 

DSP Amplifier

DONGGUAN TIANYI ELECTRONICS CO LTD

This is a car amplifier that comes with a robust housing for enhanced durability. It is well designed to deliver excellent sound quality with high fidelity. This car amplifier is an ideal addition to complete your vehicle.
 
  Power: 1 x 1,200W. 
  Digital class D mono block with a remote control. 
 

Car Amplifier

D1S with plug play cables enhances the sound of factory sound system, just doesn't get any easier than this.  Features • Intelligent High Level Input (Error Protection System) • Start-Stop ready, Auto Turn-On • Burr-Brown converters (PCM3168A) and Analog Devices DSP(ADAU1701),,controllable via PC software • Signal-to-noise Ratio ≥90dB • Frequency Response 15 Hz – 22 kHz (-3dB) • THD ≤0,02% (1 kHz, 4Ω, 90% Power) • Plug+Play with vehicle-specific cable sets  Specification Power output(RMS) @ 14.4 VDC, 1% THD: 4CH @ 4 Ω：25 W x 4 4 x High Level Input 2 x AUX/RCA Input 4 x Loudspeaker Output amplified 6 x Pre-Amplifier Output/RCA (configurable via DSP) Dimensions: 165 x 98 x 32 mm 

The new M4+v3 DSP amplifier can be considered as the little brother of the M6 model. The only difference: The M4+ is coming with four amplified speakers, but still offering more power per channel than the larger M6. The newly engineered Class D technology is particularly immune to EMC interference, which is virtually indispensable in today‘s electronic-packed vehicles.  A key-premise to enjoy interference-free music while driving. With four bridged power outputs, each one providing 135 watts RMS per channel (2 Ω), the M4+v3 offers remarkable output power with a total of 540 watts RMS. M4 + is perfect for tuning original 4-channel sound systems. Four additional DSP-tunable preamp outputs allow the integration of further amplifiers.  Features • Intelligent High Level Input (Error Protection System) • Start-Stop ready, Auto Turn-On • Burr-Brown converters (PCM3168A) and Analog Devices DSP (ADAU1452) • 32bit, 295 MHz DSP technology, controllable via new V3 PC software or Tunest App • Soft-Clipping (power attenuation) in 2 Ohm operation • Signal-to-noise Ratio ≥90dB • Frequency Response 15 Hz – 22 kHz (-3dB) • THD ≤0,1% (1 kHz, 4Ω, 90% Power) • Separately controllable input sensitivity (Channel 1-6, AUX), Clipping LEDs • Plug+Play with vehicle-specific cable sets • External Bluetooth® USB-Dongles BTS, BTS-HD &amp; BTA2 for Audio Streaming &amp; App Control (optional) • Digital remote control DRC1 with OLED display for controlling various DSP functions (optional)  Specification Power output(RMS) @ 13.8 VDC, 1% THD: 4 x 100/135 Watts RMS @ 4/2 Ω or 2 x 270 Watts RMS @ 4 Ω bridged 6 x High Level Input 6 x RCA Low Level Input* 2 x AUX/RCA Input, 1 x Optical Input/Stereo 4 x Loudspeaker Output amplified 4 x Pre-Amplifier Output/RCA (configurable via DSP) Dimensions: 220 x 44 x 150 mm * only with optional MPK-RCA6/MPK-RCA6-PP cable 

M12 12-Channel Class D Amplifier with 16-Channel DSP · 1440 Watts RMS  Features • Intelligent High Level Input (Error Protection System) • Start-Stop ready, Auto Turn-On • Burr-Brown converters (PCM3168A) and Analog Devices DSP (ADAU1466) • 32bit, 295 MHz DSP technology, controllable via new V3 PC software or Tunest App • Signal-to-noise Ratio ≥95dB • Frequency Response 15 Hz – 22 kHz (-3dB) • THD ≤0,05% (1 kHz, 4Ω, 90% Power) • Separately controllable input sensitivity (Channel 1-6, Channel 7-12, AUX), Clipping LEDs • External Bluetooth® USB-Dongles BTS, BTS-HD &amp; BTA2 for Audio Streaming &amp; App Control (optional) • Digital remote control DRC1 with OLED display for controlling various DSP functions (optional)  Specification Power output(RMS) @ 14.4 VDC, 1% THD: @ 4/2 Ohms 85/120 Watts RMS per channel* @ 4 Ohms bridged 240 Watts RMS per channel pair* 12 x High Level Input 8 – 24 V RMS with EPS 6 x RCA Low Level Input (RCA) 2 – 6 V RMS 1 x RCA AUX Input/Stereo 2 – 8 V RMS 1 x Optical Input/Stereo (PCM, 192 kHz / 24 bit) 4 x RCA Pre-Amplifier Output (configurable via DSP) 12 x Loudspeaker Output amplified Dimensions: 340 x 48 x 171,5 mm * depending on the application 

D8 8-Channel Class D Amplifier with 10-Channel DSP · 600 Watts RMS  Features • Intelligent High Level Input (Error Protection System) • Start-Stop ready, Auto Turn-On • Burr-Brown converters (PCM3168A) and Analog Devices DSP (ADAU1452) • 32bit, 295 MHz DSP technology, controllable via PC software or Tunest App • Signal-to-noise Ratio ≥90dB • Frequency Response 15 Hz – 22 kHz (-3dB) • THD ≤0,1% (1 kHz, 4Ω, 90% Power) • External Bluetooth® USB-Dongles BTS, BTS-HD &amp; BTA2 for Audio Streaming &amp; App Control (optional) • Digital remote control DRC1 with OLED display for controlling various DSP functions (optional)  Specification Power output(RMS) @ 13.8 VDC, 1% THD: 8 x 50/75 Watts RMS @ 4/2 Ohms or 4 x 150 Watts RMS @ 4 Ohms bridged 8 x High Level Input 10 or 18 V RMS 1 x AUX Input/Stereo (RCA) 4 V RMS 1 x Optical Input/Stereo (PCM, 96 kHz / 24 bit) 8 x Loudspeaker Output amplified 2 x Pre-Amplifier Output (RCA) 4 V RMS (configurable via DSP) Dimensions: 127 x 37 x 205 mm 

ONE600 Mono Class D Amplifier·650 Watts RMS  Features Start-Stop ready, Auto Turn-On EPS (Error Protection System) Interference Free Technology, EMC proved PURE IN&gt;OUT Function High and Low Level Inputs Brushed aluminum heat sink and end panels Compact Bass Level Remote Controller  Specification Power output(RMS) @ 14.4 VDC, 1% THD: 1x250/400/650@ 4 Ω/2 Ω/1 Ω Subsonic-Filter 10 - 40 Hz, Lowpass Filter 40 - 150 Hz Bass Boost 0 - 18 dB, Phase 0 - 180° Filter Bypass Function (Pure Amplification) Quick Connect Speaker Output Dimensions: 150 x 45 x 200 mm 

M6 6-Channel Class D Amplifier with 8-Channel DSP · 630 Watts RMS  Features • Intelligent High Level Input (Error Protection System) • Start-Stop ready, Auto Turn-On • Burr-Brown converters (PCM3168A) and Analog Devices DSP (ADAU1452) • 32bit, 295 MHz DSP technology, controllable via new V3 PC software or Tunest App • Soft-Clipping (power attenuation) in 2 Ohm operation • Signal-to-noise Ratio ≥90dB • Frequency Response 15 Hz – 22 kHz (-3dB) • THD ≤0,1% (1 kHz, 4Ω, 90% Power) • Separately controllable input sensitivity (Channel 1-4, Channel 5-6), Clipping LEDs • Plug+Play with vehicle-specific cable sets • External Bluetooth® USB-Dongles BTS, BTS-HD &amp; BTA2 for Audio Streaming &amp; App Control (optional) • Digital remote control DRC1 with OLED display for controlling various DSP functions (optional)  Specification Power output(RMS) @ 13.8 VDC, 1% THD: 6 x 70/105 Watts RMS @ 4/2 Ohms or 3 x 210 Watts RMS @ 4 Ohms bridged 6 x High Level Input 8 – 20 V RMS 6 x RCA Low Level Input* (RCA) 2 – 6 V RMS 1 x AUX Input/Stereo (RCA) 2 – 6 V RMS 1 x Optical Input/Stereo (PCM, 96 kHz / 24 bit) 6 x Loudspeaker Output amplified 2 x Pre-Amplifier Output (RCA) 4 V RMS (configurable via DSP) Dimensions: 150 x 44 x 220 mm * only with optional MPK-RCA6/MPK-RCA6-PP cable set 

FOUR100 4-Channel Class D Amplifier·800 Watts RMS  Features • Class D Technology with very high efficiency • Selected and audiophile tuned components • Interference-free technology (ITF), high EMC • Intelligent High Level Input with Error Protection System • Auto Turn-On, Start Stop ready • Compact brushed aluminum heatsink • Compact Bass Level Remote Controller  Specification Power output(RMS) @ 14.4 VDC, 1% THD: 4x130 W /220W@ 4 Ω/2 Ω or 2x435W @ 4 Ω bridged Highpass Filter 50 - 5000 Hz (CH1/2) Highpass Filter 10 - 500 Hz (CH3/4) Lowpass Filter 50 - 5000 Hz (CH3/4) Bass Boost 0 - 12 dB (CH3/4) Bandpass Function (CH3/4) CH3/4 &gt; CH1/2 Copy Function Input Mode Switch CH2/CH4 RCA Inputs, RCA Outputs High Level Inputs with EPS Auto Turn On Function Bass Remote Controller Dimensions: 150 x 45 x 220 mm  

P2 2-Channel Class D Amplifier ·210 Watts RMS  Specification Power output(RMS) @ 14.4 VDC, 1% THD: 2 x 80/100 Watts RMS @ 4/2 Ω 1 x 210 Watts RMS @ 4 Ω bridged 2 x RCA Input/Stereo Detachable Speaker and Power Connectors Dimensions: 124 x 36 x 75 mm 

ONE1000 Mono Class D Amplifier·1050 Watts RMS  Features Start-Stop ready, Auto Turn-On EPS (Error Protection System) Interference Free Technology, EMC proved PURE IN&gt;OUT Function High and Low Level Inputs Brushed aluminum heat sink and end panels Compact Bass Level Remote Controller  Specifications Power output(RMS) @ 14.4 VDC, 1% THD: 1x435/710/1145@ 4 Ω/2 Ω/1 Ω 1 x 400/650/1050 Watts RMS @ 4/2/1 Ω Subsonic-Filter 10 - 40 Hz, Lowpass Filter 40 - 150 Hz Bass Boost 0 - 18 dB, Phase 0 - 180° Filter Bypass Function (Pure Amplification) Quick Connect Speaker Output Dimensions: 150 x 45 x 240 mm 

EIGHT100 8-Channel Class D Amplifier·1440 Watts RMS  Features • Class D Technology with very high efficiency • Selected and audiophile tuned components • Interference-free technology (ITF), high EMC • Intelligent High Level Input with Error Protection System • Auto Turn-On, Start Stop ready • Compact brushed aluminum heatsink • Compact Bass Level Remote Controller  Specification Power output(RMS) @ 14.4 VDC, 1% THD: 8x110 W /195W@ 4 Ω/2 Ω or 4x390 W @ 4 Ω bridged Highpass Filter 50 - 5000 Hz (CH1/2 &amp; CH5/6) Highpass Filter 10 - 500 Hz (CH3/4 &amp; CH7/8) Lowpass Filter 50 - 5000 Hz (CH3/4 &amp; CH7/8) Bandpass Function (CH3/4 &amp; CH7/8) Input Selector Dimensions: 150 x 45 x 320 mm 

Features Start-Stop ready, Auto Turn-On EPS (Error Protection System) Interference Free Technology, EMC proved PURE IN&gt;OUT Function High and Low Level Inputs Brushed aluminum heat sink and end panels Compact Bass Level Remote Controller  Specification Power output(RMS) @ 14.4 VDC, 1% THD: 1x925/1500/2040@ 4 Ω/2 Ω/1 Ω Subsonic-Filter 10 - 40 Hz, Lowpass Filter 40 - 150 Hz Bass Boost 0 - 18 dB@ 45Hz, Phase 0 - 180° Filter Bypass Function (Pure Amplification) Quick Connect Speaker Output Dimensions: 320 x 50 x 160 mm 

10-Channel Class D Amplifier with 14-Channel DSP   Features • Intelligent High Level Input (Error Protection System) • Start-Stop ready, Auto Turn-On • Burr-Brown converters (PCM3168A) and Analog Devices DSP (ADAU1466) • 32bit, 295 MHz DSP technology, controllable via new V3 PC software or Tunest App • Signal-to-noise Ratio ≥95dB • Frequency Response 15 Hz – 22 kHz (-3dB) • THD ≤0,05% (1 kHz, 4Ω, 90% Power) • Separately controllable input sensitivity (Channel 1-8, Channel 9-10, AUX), Clipping LEDs • External Bluetooth® USB-Dongles BTS, BTS-HD &amp; BTA2 for Audio Streaming &amp; App Control (optional) • Digital remote control DRC1 with OLED display for controlling various DSP functions (optional)  Specification Output Power @ 13,8 VDC, 1% THD: 8 x 155 Watts RMS @ 2 Ω (Channel 1 - 8 DHR*) + 2 x 220 Watts RMS @ 2 Ω (Channel 9 / 10) 8 x 80/135 Watts RMS @ 4/2 Ω (Channel 1 - 8) + 2 x 120/220 Watts RMS @ 4/2 Ω (Channel 9 / 10) Output Power bridged @ 13,8 VDC, 1% THD: 4 x 310 Watts RMS @ 4 Ω (Channel 1 - 8 DHR*) + 1 x 440 Watts RMS @ 4 Ω (Channel 9 / 10) 4 x 270 Watts RMS @ 4 Ω (Channel 1 - 8) + 1 x 440 Watts RMS @ 4 Ω (Channel 9 / 10) 12 x High Level Input with EPS（CH 1-8: 8 - 24 V/RMS , CH 9-10: 8 - 32 V/RMS) 6 x RCA Low Level Input (RCA) 2 – 6 V RMS 1 x RCA AUX Input/Stereo 2 – 8 V RMS 1 x Optical Input/Stereo (PCM, 192 kHz / 24 bit) 4 x RCA Pre-Amplifier Output (configurable via DSP) 12 x Loudspeaker Output amplified Dimensions: 280 x 45.5 x 166 mm   

SIX100 6-Channel Class D Amplifier·1080 Watts RMS  Features • Class D Technology with very high efficiency • Selected and audiophile tuned components • Interference-free technology (ITF), high EMC • Intelligent High Level Input with Error Protection System • Auto Turn-On, Start Stop ready • Compact brushed aluminum heatsink • Compact Bass Level Remote Controller  Specification Power output(RMS) @ 14.4 VDC, 1% THD: 6x120 W /200W@ 4 Ω/2 Ω or 3x395 W @ 4 Ω bridged Highpass Filter 50 - 5000 Hz (CH1/2) Highpass Filter 10 - 500 Hz (CH3/4 &amp; CH5/6) Lowpass Filter 50 - 5000 Hz (CH3/4 &amp; CH5/6) Bandpass Function (CH3/4 &amp; CH5/6) Bass Boost 0 - 12 dB (CH5/6) Input Selector CH2/CH4/CH6 Dimensions: 150 x 45 x 290 mm  

Features • Intelligent High Level Input (Error Protection System) • Start-Stop ready, Auto Turn-On • Burr-Brown converters (PCM3168A) and Analog Devices DSP (ADAU1452) • 32bit, 295MIPS MHz DSP DSP technology, controllable via new V3 PC software or Tunest App • Separately adjustable input sensitivity (CH1-4, CH5-6, AUX) • High quality full aluminum housing • External Bluetooth® USB-Dongles BTS, BTS-HD &amp; BTA2 for Audio Streaming &amp; App Control (optional) • Digital remote control DRC1 with OLED display for controlling various DSP functions (optional)  Specification 6 x High Level Input 3 – 21 V RMS 6 x Low Level Input (RCA) 1 – 5 V RMS 1 x AUX Input/Stereo (RCA) 1 – 5 V RMS 1 x Optical Input/Stereo (PCM, 96 kHz / 24 bit) 8 x RCA Output 6,5 V RMS Dimensions: 181 x 41 x 124 mm 

DSP Processors

Musway Mono Class D Car Audio Amplifier ONE600:      

Elite Audio Co., Ltd.

This is a power amplifier. The vacuum tube part features two pieces of CV4010 pentode. The vacuum part is made in England.
    Power Source: DC 12.5V (11-14.4V)  Output power @4 ohm 2 channel: 100 Watts x2  Damping factor : > 200  Signal to noise ratio "A" Wtd : 100 db  

Vacuum Tube Power Amplifier

Cadence Acoustics, Ltd.

 Featured&nbsp;is an amplifier in sharp golden color.&nbsp;This entry-level amplifier is provided with high power.&nbsp;The bold amplifier suits modern audio systems. 
 
  Made of reliable and durable components. 
  High capability. 
 

Amplifier

Shenzhen Musway Technology Co Ltd

  D1  ／4-channel Class AB Amplifier With 6-channel DSP

4CH Class AB amplifier Built－In 6CH DSP, plug &amp; Play enhances the sound of an original sound system just doesn&#39;t get any easier than this.&nbsp;
&nbsp;
  Features   	 Each channel is allocated output power 30W. 56-bit DSP main chip supports 10-band EQ, digital crossover and time correction. 	 6-CH low-level output, 4-CH power output. 	 Built-in 4-CH high-performance high-to-low converter, Hi-Fi sound quality, low noise. 	 Advanced power amplifier control circuit can eliminate the impulsive sound at start and stop. 	 For cars without ACC wire, speaker wire can be used to control the start and stop of machine. 	 Optional module：CSR Bluetooth Audio Streaming module.  

4-channel Class AB Amplifier With 6-channel DSP

Featured is a full-range 2-channel amplifier with high-speed power supply. The amplifier comes with an adjustable subsonic filter and capable bass band. The high-performance amplifier is easy to install.
 
  Power: 350W. 
  2 channels. 
 

  D8  /8-channel amplifier with 10-channel DSP

D8 opens up new horizon for lossless upgrading high-medium-end car sound system, especially for BMW, Mercedes-Benz, etc.

  Features   	 Developed for high-medium-end cars, lossless install by Plug&amp;Play harness wire.&nbsp; 	 Eight speaker outputs with up to 75 Watts RMS into 4 Ohms, settable in bridge mode. 	 2-channel Pre-amp output for the connection of additional amplifiers. 	 Dual 32bit，330MIPS DSP，10-band EQ and digital time delay. Extremely powerful DSP with virtually limitless sound adjustment options freely configurable via PC software. 	 Inputs: 8-channel High level, 2-channel AUX input, any of the input channels can be configured and mixed. 	 Perfect protection and heat dissipation guarantees reliable and stable performance of machine. 	 Optional module：CSR Bluetooth Audio Streaming module.  

8-channel Amplifier with 10-channel DSP

Soundmagus Int'l Ltd

This powerful amplifier comes in a rectangular shape with two sides highlighted by black edges. This mono bass amplifier can reproduce louder sound. Being a full-range amplifier, it can respond to the widest range of frequency. Get&nbsp;this great amplifier and enjoy music.   High-quality amplifier.   An essential part in an automobile.  

SK Series regulated power supply car amplifier 	 150W RMS X4 (4ohm stereo, less than 1% THD+N) 	 300W RMS X4 (2ohm stereo, less than 1% THD+N) 	 600W RMS X2 (4ohm Bridged, less than 1% THD+N)  

My Sourcing