Clocks

Zhejiang Qicheng Electrical Equipment Co., Ltd.

 	 Turn-On Light Level: 10-16 Lux 	 Turn ON/OFF Ratio: 1:1.5 to 4 	 Time Delay: 3-15 sec 	 Relay: 30A MOV 	 Surge Protection:320J 	 Electrical Life: 5000 cycles 	 Sensor Type: Silicon Photocell 	 Housing: UV stabilized PC 	 Failure Mode: Fail On 	 Size: 80mm, 74mm  

Electronic Twist Lock Photo Control

AEI Protect-On Systems Ltd

DK-2891 MK-II is a self-contained dual output relay, vandal-resistant and weatherproof Keypad. It combines the digital keypad and proximity EM card reader in one unit. DK-2891A – Dual output surface mount keypad DK-2891B –Dual output surface mount keypad with door bell output The keypad compatible with three operation modes: (1) Stand-Alone Mode – Keypad and Electric Lock (2) Multi-Station Mode – Keypad, Auxiliary Keypad and Electric Lock (3) Split-Decoded Mode – Keypad, Split Decoder and Electric Lock In these three-operation modes, split decode has the highest security protection for home and office. Features: Dual relay output for door lock and equipment controlBuilt-in real-time clock for inhibition modeOptional multi-station, split-decode for expansionDifferent levels of user modeInterlock for dual keypad installationDuress and alarm output for external deviceVisitor password programable with timeOutput relay change be toggle or time modeBuilt-in tamper switchVandal-resistant weatherproof with back-lit metal keytopSuitable installation on wall

Access Control Keypad with Card Reader

    Protects shops, offices, residences, mobile homes &amp; boats, everybody affordable.    Two independent protection zones, instant and delay.    Home or away operation.    Built-in door chime and siren.    Facility for connecting optional remote arm-disarm switch.    Facility for connecting optional remote status indicator.    Facility for connecting door chime buttons.    End-of-line resistor supervisd, compatible with both N.C. &amp; N.O. sensors.    Fixed 60 seconds exit delay, 30 seconds entry delay &amp; 3 minutes alarm time.    Siren driver capable to drive 2 external 8 Ohm siren horns.    12VDC output wet relay contact for other alarm peripheral devices.    12-16VDC operation, 5mA low standby current.    Size: 87(H) x 120(W) x 33(D) mm.    Weight: 180 g.

Alarm Controller 

DK-2811 MK-II is a self-contained signel output relay Keypad. It combines the digital keypad and proximity EM card reader in one unit. The keypad compatible with three operation modes: (1) Stand-Alone Mode – Keypad and Electric Lock (2) Multi-Station Mode – Keypad, Auxiliary Keypad and Electric Lock (3) Split-Decoded Mode – Keypad, Split Decoder and Electric Lock In these three-operation modes, split decode has the highest security protection for home and office. Features: Single relay output for door lockBuilt-in real-time clock for inhibition modeOptional multi-station, split-decode for expansionDifferent levels of user modeVisitor password programable with timeOutput relay change be toggle or time modeBuilt-in tamper switchSuitable installation on wall

DK-2872 MK-II+ is a self-contained three output relay (Wi-Fi) Keypad. It combines the digital keypad and proximity EM card reader in one unit. The keypad compatible with three operation modes: (1) Stand-Alone Mode – Keypad and Electric Lock (2) Multi-Station Mode – Keypad, Auxiliary Keypad and Electric Lock (3) Split-Decoded Mode – Keypad, Split Decoder and Electric Lock In these three-operation modes, split decode has the highest security protection for home and office. Further, the keypad can be upgraded with the Wi-Fi Module to gain more features, such as remote control, receive &amp; record checking and setting password via mobile app.  Features: Three relay output for door lock and equipment controlBuilt-in real-time clock for inhibition modeOptional multi-station, split-decode and Wi-Fi socket for expansion26-bit, 34-bit or 37-bit Wiegand data outputDifferent levels of user modeInterlock for dual keypad installationDuress and alarm output for external deviceVisitor and temporary password programable with timeOutput relay change be toggle or time modeBuilt-in tamper switchBack-lit silicon rubber keytopApp compatible for remote control, receive alarm message and password settingSuitable installation on wall

Wi-Fi Access Control Keypad

XINLING ELECTRIC CO.,LTD

 This time relay is designed with a 3A 220V AC contact capacity. There are various operating voltages available to meet your needs. This robust time relay is sure to service for a long time. 
 
  Operating voltage: DC 24V, AC 24V, AC 36V, AC 110V, AC 220V, AC 380V, 50Hz. 
  Scope of allowed voltage fluctuation: 85%-110%. 
  Time delay range: 0.1s-120h (adjustable). 
  Repetitive error: range&ge;1s, Er&le;1% and range&le;1s, Dr&le;50ms. 
  Contact form: DPDT (1 changeover for time delay, 1 changeover for instantaneous acting). 
  Contact capacity: 3A 220V AC (resistive load). 
 

Time Relay

YUEQING KAMPA ELECTRIC CO LTD

This showcased time relay is professionally engineered to deliver high performance. It is designed with a digital display for easy and convenient reading. This time relay is a great choice for various electronic products.
 
  The error of delaying: &lt;1%. 
  Working model: on-delay time. 
  Contact capacity: 5A. 
 

This showcased time relay comes with a digital display for easy reading. It is manufactured under strict QC to promise quality you can rely on. This time relay is sturdily built for extended durability.
 
  The error of delaying: &lt;1%. 
  Working model: on-delay time. 
  Contact capacity: 5A. 
 

McWong International, Inc.

 	 PIR, microwave &amp; ultrasonic sensor 	 0-10V configurable output: Dim-to-off, &nbsp;0%, 10%, 25% or 50% dimming 	 Photocell for ambient light detection 	 Time delay adjustable 5 sec to 30 min 	 LED motion indicator 	 Active high/low outputs for Relay drive 	 Mounting height up to 40ft. 360&deg; coverage pattern  

Bi-Level Dimming Sensor

This time relay comes with a digital display for easy reading. It is professionally engineered to ensure outstanding performance. The robust housing can withstand daily wear and tear.
 
  The error of delaying: &lt;1%. 
  Working model: on-delay time. 
  Contact capacity: 5A. 
 

Jyh-Kuen Industry Co Ltd

  There are electronic timer, power monitoring and protecting relay available  The timers includes din side multi timer, delay on timer, digital counter, recycling timer, etc  The relays are offered in micro processing, self powered, level control and over current types  They may be used for industrial machines in factories and electrical appliances at home and office  

Electronic Timer

This high-quality&nbsp;time relay is widely used in electronic products. It is professionally engineered to deliver reliable and stable performance. The robust structure ensures a long service life.
 
  The error of delaying: &lt;1%. 
  Working model: circle delaying. 
  Contact capacity: 5A. 
 

Quad Element PIR sensor 0-10V configurable output: set to OFF, 0%, 10%, 25% or 50% dimming Photocell for ambient light detection Time delay adjustable 5 sec to 30 min LED Motion indicator Active High/Low outputs for Relay drive Mounting height up to 40ft. 360&deg; coverage pattern

PSC-BL-I-FM-DC0 Bi-level Dimming Sensor

This is a time relay that is well engineered to deliver reliable and stable performance. The over-voltage protection ensures added security. The timing error is lower than 0.01%.
 
  Operating power source: DC 24V, AC 24V, AC 36V, AC 110V, AC 220V, AC 380V/50Hz. 
  Time delay range: 999m59s, 999h59m, 9,999.9m, 9,999.9h. 
  Timing mode: counting. 
  LED display reset mode: reset button or terminal short-circuit. 
  Power failure memory: 10 years. 
  Timing error: &le;0.01%. 
 

Tesor Plus Corp.

 	 Concealed antenna 2-way LCD display handset. 	 7 colors LCD backlight. 	 1,000 meters (3300 feets) long pager range. 	 LCD icons display: lock, unlock, sensor bypass, silent alarm, valet mode, hood/trunk/door open/sensor/ignition/zone 4 triggers, transmitting mode, in range indicator, out of range indicator, check mode, engine cranking, engine running, timer control start, daily start, temperature start, turbo timer, manual gear, anti-hijack mode, CH1/2/3/4/5/6, time monitor, alarm clock, parking timer, battery level check, beeper/melody/vibration modes, status, car battery voltage, hood temperature, car select, LCD color selection, button lock, power save.&nbsp; 	 Super slim control module with 7-pc super mini hi-power relay build-in. 	 GSM &amp; CAN bus 2 data ports available. It can link to SM200 smartphone tracking system and CAN bus interface module. 	 Include 1-pc 2-Way LCD display HHU and 1-pc 1-way transmitter. 	 Code-hopping, anti-graber, anti-scanner. 	 Code-learning new transmitter codes and erase lost transmitter codes. 	 4-pc engine start relay build-in. 	 Remote engine start. 	 Daily start. 	 Periodically start. 	 Temperature start. 	 Automatic/manual transmission selection. 	 Safety procedure for manual transmission vehicle start. 	 Gasoline or diesel engine selection. 	 RPM learning. 	 &nbsp;RPM/voltage/generator/time delay engine start detection. 	 Push-button start vehicle selection. 	 Turbo timer. 	 Arm with engine running. 	 2-pc door lock relay build-in with 6-wire output for universal door lock interface. 	 1-pc light flash relay build-in. 	 Positive &amp; negative door open/hood open/trunk open/ignition key On/sensors triggers. 	 2-stage shock sensor. 	 2 sensors inputs. 	 Arm and disarm. 	 Lock and unlock. 	 Arm with sensor bypass. 	 Silent arm/disarm. 	 Trigger zone display. 	 Auto rearm. 	 Passive arm/arming reminder/passive lock with passive arm. 	 Immobilizer mode. 	 2-stage unlock. 	 Ignitions lock/unlock. 	 Car finder. 	 Trunk release. 	 Channel 1~6 outputs. 	 Panic. 	 Anti-hijack. 	 Valet mode. 	 Valet switch override. 	 PIN code override and new PIN code programmable. 	 Manual arm. 	 28 programmable functions.&nbsp;  

LCD Display 2-Way Alarm & Starter with Super Slim Module

Zhejiang Yiyuan Electric Co., Ltd.

This voltage regulator automatically corrects brownouts and over-voltages. It offers quick response&nbsp;for instant recovering. The front panel displays the relative input voltage level and alerts you for unstable voltage conditions.
 
  Wide input voltage range. 
  Short-circuit and overload protections. 
  Selectable LED analog meter and display. 
  Selectable delay time: 3-7 seconds or 3-7 minutes. 
  Built-in transformer (relay type). 
  Input phase: single. 
  Input voltage: AC 150-250V, AC 50-130V. 
  Input frequency: 50/60Hz. 
  Output voltage: 220+/- 3%, 110+/- 10%. 
  Output capacity: 4,000W. 
  Low voltage: 184V+/- 4V. 
  Over voltage: AC 246V+/- 4V. 
  Efficiency: &gt;95% (AC-AC). 
  Noise level: &le;50dB. 
  Temperature: -5 to 40&deg;C. 
  Humidity: 20-90%. 
 

Automatic Voltage Regulator

This voltage regulator automatically corrects brownouts and over-voltages. The LED analog display shows users the relative input voltage level and alerts you of unstable voltage conditions. Its low noise level of below 50dB ensures a quiet operation.
 
  Wide input voltage range. 
  Short-circuit and over-load protections. 
  Selectable LED analog meter and display. 
  Selectable delay time: 3-7 seconds or 3-7 minutes. 
  Built-in transformer (relay type). 
  Input phase: single. 
  Input voltage: AC 150-250V, AC 50-130V. 
  Input frequency: 50/60Hz. 
  Output voltage: 220V +/- 3%, 110V+/- 10%. 
  Output capacity: 400W. 
  Low voltage: 184V+/- 4V. 
  Over voltage: AC 246V+/- 4V. 
  Efficiency: &gt;95% (AC-AC). 
  Noise level: &le;50dB. 
  Temperature: -5 to 40&deg;C. 
  Humidity: 20-90%. 
 

This voltage regulator automatically corrects brownouts and over-voltages. The front panel displays the relative input voltage level and alerts you&nbsp;of unstable voltage conditions. It corrects frequent tap changing, which reduces wear on the relays for a longer lifespan and quiet operation.
 
  Wide input voltage range. 
  Short-circuit and over-load protections. 
  Selectable LED analog meter and display. 
  Selectable delay time: 3-7 seconds or 3-7 minutes. 
  Built-in transformer (relay type). 
  Input phase: single. 
  Input voltage: AC 150-250V, AC 50-130V. 
  Input frequency: 50/60Hz. 
  Output voltage: 220+/- 3%, 110+/- 10%. 
  Output capacity: 1,200W. 
  Low voltage: 184V+/- 4V. 
  Over voltage: AC 246V+/- 4V. 
  Efficiency: &gt;95% (AC-AC). 
  Noise level: &le;50dB. 
  Temperature: -5 to 40&deg;C. 
  Humidity: 20-90%. 
 

2210NR 	 2-way LCD display handset with multi-channel pager 	 Pager range up to 1000 meters (3300 feets) in open area 	 LCD icons display: TX/RX mode, disarm/unlock, arm/lock, mute arm/disarm, anti-hijack, valet mode, light or heavy shocking, hood/trunk, door, ignition &amp; brake triggers, vibration or melody alert, melody select, low batter, car call&hellip; 	 Including 1-pc 2-way transmitter &amp; 1-pc 1-way transmitter 	 External 2-way transceiver antenna  &nbsp;
Other Functions: 	 Comes with GSM Smartphone port can work with SM200 Smartphone tracking &amp; security system to can be remote controlled by Smartphone too, also comes with CANBUS port can work with CANBUS interface module to link to car CANBUS 	 Code-hopping, anti-grabber, anti-scanner 	 Code-learning &amp; lost transmitter code erase 	 Door, hood/trunk &amp; ignition trigger inputs 	 Negative &amp; positive door trigger inputs 	 2-stage shock sensor 	 2-sensor inputs 	 Arm with sensor bypass 	 Mute arm/disarm 	 Refresh icons status 	 Status check 	 Car locating 	 Panic 	 Anti-hijack 	 Manual arm/disarm without transmitter 	 Valet mode 	 Override by valet switch or PIN code 	 New PIN code programmable 	 False trigger mode 	 Siren stop 	 External starter disable relay 	 Build-in door lock relays for door lock universal interface 	 Build-in relay for light flash indication 	 Programmable CH1/2/3 outputs 	 Valet switch &amp; status LED included 	 Programmable central lock timing, 2 pulse unlock, chirp on/off, ignition lock/unlock &amp; footbrake lock, passive arm/lock, auto rearm on/off, siren/horn output, dome light delay, sensor delay, anti-hijack on/off, factory setting 	 Customer required functions developing are also welcome  

Remote Alarm with GSM Smartphone and CANbus 2 Dataports

 	 2-way LCD display handset with multi-channel pager 	 Pager range up to 1000 meters (3300 feets) in open area 	 LCD icons display: TX/RX mode, disarm, unlock, arm, lock, mute arm/disarm, light or heavy shocking, valet mode, low battery, anti-hijack, trunk, hood, door ignition separate triggers, vibration or buzzer alert, car call 	 Including 1-pc 2-way transmitter &amp; 1-pc 1-way transmitter 	 2-way transceiver antenna with car call button &amp; status LED 	 Code-hopping, anti-grabber, anti-scanner 	 Code-learning &amp; erase lost transmitter codes 	 Door, hood/trunk &amp; ignition trigger inputs 	 Negative &amp; positive door trigger inputs 	 2-stage shock sensor 	 Arm with sensor bypass &nbsp; 	 Mute arm/disarm 	 Refresh icons status 	 Status check 	 Keep engine running 	 Car locating 	 Panic 	 Turbo timer 	 Anti-hijack 	 Manual arm/disarm without transmitter 	 Valet mode 	 2-type valet switch override &nbsp; 	 False trigger mode 	 Siren stop 	 External relay starter disable 	 Build-in relay for light flash indication 	 Build-in door lock relays for universal interfacing 	 CH2/CH3/CH4 programmable multifunction channel outputs 	 Valet switch &amp; status LED included 	 Programmable functions: IG On lock, IG Off unlock, Passive arm, auto immobilizer, CH2, CH3, CH4, Chirps confirmation, PIN or Valet override, anti-hijack, lock timing, dome light delay, return&nbsp;&nbsp; factory setting 	 Customer required function developing are also welcome  

2-Way LCD Display Remote Alarm 

 	 2220RS 	 2-way LCD display handset with multi-channel pager 	 Pager range up to 1000 meters (3300 feets) in open area 	 LCD icons display: TX/RX mode, disarm/unlock, arm/lock, mute arm/disarm, light or heavy shocking, sensor bypass, auto arm, auto immobilizer, remote start, periodical start, clock start, temperature start, valet mode, low batter, anti-hijack, trunk/hood/door/ignition triggers, vibration or buzzer alert, parking time countdown, car call 	 Including 1-pc 2-way transmitter &amp; 1-pc 1-way transmitter 	 External 2-way transceiver antenna 	 Comes with GSM Smartphone port can work with our SM200 GPS/GSM Smartphone tracking &amp; security system to can be remote controlled by Smartphone too, also comes with CANBUS port can work with CANBUS interface module to link to car CANBUS 	 Code-hopping, anti-grabber, anti-scanner 	 Code-learning &amp; lost transmitter code erase 	 Remote engine start 	 Daily start 	 Periodical start 	 Temperature start 	 Safety procedure for manual transmission car start 	 Gasoline or diesel engine selection 	 Rpm/voltage/generator/time delay engine start detection 	 Rpm learning 	 Turbo timer 	 Keep engine running 	 Door, hood/trunk &amp; ignition trigger inputs 	 Negative &amp; positive door trigger inputs 	 2-stage shock sensor 	 2-sensor inputs 	 Arm with sensor bypass 	 Mute arm/disarm 	 Refresh icons status 	 Car locating 	 Status check 	 Panic 	 Anti-hijack 	 Manual arm/disarm without transmitter 	 Valet mode by valet switch or by transmitter 	 Valet switch or PIN code override 	 New PIN code programmable 	 False trigger mode 	 Siren stop 	 Starter disable by external relay 	 Disarm/arm outputs 	 Ignition lock/unlock and footbrake lock selection 	 4 programmable channel 1/2/3/4 outputs for trunk open, window close, factory pulse arm output, 2nd unlock, factory pulse disarm output, home light output, start2 output 	 Programmable central lock timing, 2 pulse unlock, turbo timer, ignition lock/unlock, footbrake lock, passive arm/lock, auto rearm, siren or horn output, dome light delay, sensor 1/2 delay, anti-hijack on/off, override by valet switch or PIN code, different temp, start, engine warm up timing, start success lamp flash, engine start detection, auto/manual transmission, push-button start, factory setting  

Remote Alarm & Starter with GSM Smartphone and CANbus 2 Dataports

Staba Electric Co Ltd

 	 Technology:&nbsp;Solid state relay (Triac) tap change + Zero cross transfer technology 	 Response Time:&nbsp;&lt; 50ms 	 Material of Front Panel: Plastic&nbsp; 	 Material of Cabinet:&nbsp;Metal 	 Input Voltage: 140-270V / 100-270V 	 Input Frequency:&nbsp;45-65Hz 	 Output: 	 Rated Output Voltage:&nbsp;220V / 230V 	 Output Voltage Range:&nbsp;&plusmn;4% / &plusmn;10% 	 Output Frequency: Same as input frequency 	 Green LED: Power On 	 Yellow LED: Delaying&nbsp;(Output is being suppressed) 	 Red LED: Protecting (Output is cut off) 	 Protection: Over voltage, under-voltage, overload, over-temperature of Triac &amp; transformer, short circuit, out of frequency 	 Operating Temperature: 0&deg;C ~ +40&deg;C 	 Storage Temperature:&nbsp;-15&deg;C ~ +45&deg;C 	 Operating Humidity:&nbsp;10%-90%, non-condensing  

TVR-131 Wall Mount

Gazer Limited

Camera uses 1/4&quot; extra-sensitive sensor CMOS specially configured for operation in low light conditions - have no &quot;blue&quot; noise, very clear and bright image at night, in poor visibility, in rain or fog.The video signal format switching function allows using the camera in PAL or NTSC. It 10s switch on timer activated when the engine starts and 10s switch off delay activated when the reverse gear is disengaged. Camera has an extra-wide 175&deg; viewing angle and is absolutely free from geometric distortions thahks to special optics with an anti-reflective glass lens. The option to disable parking guide lines and image mirroring allows using the camera both for rear and front view. Camera is compatible with Gazer CAxxx mounts and can be installed instead of license plate light. Gazer mounts are identical with original license plate lights and use the original lamp of license plate light or LED backlight with 2700K warm light. Camera installation is easy and considered. The control and commutation unit for plug&amp;pluy installation included. It consists with special power cable with relay block and LC-filter, commutation unit, wiring (26.2 ft), additional cable with power jack and RCA video out - to plug&amp;play monitor connection. Due to the considered connection, there are no conflicts with the vehicle&#39;s electrical system when using the camera.&nbsp;

 Specifications :&nbsp; 	 Sensor CMOS 1/4&quot;; PAL 720x576, NTSC 720x480&nbsp; 	 Resolution PAL 540TVL, NTSC 500TVL&nbsp; 	 Video signal format PAL/NTSC&nbsp; 	 Angle of view 175&ordm;&nbsp; 	 Sensitivity 0.1Lux&nbsp; 	 Signal/noise ratio &rsaquo; 46dB&nbsp; 	 Mirror image ON/OFF&nbsp; 	 Guide lines on the image ON/OFF&nbsp; 	 Supply voltage DC 12V&nbsp; 	 Current consumption 85mA&nbsp; 	 Protection level IP67&nbsp; 	 Operating temperature -30&deg; - +70&deg; C&nbsp;  

HD Universal Waterproof Car Front/Rear View Backup Camera

SHENZHEN JISIWEI INTELLIGENT TECHNOLOGY CO LTD

1.WIFI + 3G/SMS touch keypad alarm system
2.Android + IOS APP application easily control, Easy to give authorization.&nbsp;
3.Free charges through WiFi network. When there is no WIFI, the host will work &nbsp;with 3G network. If there is neither WiFi nor 3G network ,then the alarm host will send alarm SMS and make alarm call. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;4.Work with IP camera, The IP camera APP embeds in the host APP.
5.Workable with maximum 100pcs smart socket/wireless relay output to control simple home appliances.Relay outputs name and sockets name can be revised by users
6. 8 scene settings and 20 ifttt settings.&nbsp;
&nbsp; &nbsp;Advanced home automation functions for perfect smart home life.
7.Workable with RFID wireless keypad
8.20s Leaving message remotely in APP.&nbsp;
9.Information push promptly when AC power lost or recovered or detectors in low voltage
10.Self-checking windows/doors status and chime reminds if door open
11.100 wireless defense zones, Zone names can be revised by users
12. &rdquo;ding dong&rdquo; doorbell function,when someone press doorbell,the APP application will pop up push message&quot; someone is pressing your doorbell&quot; ,if user installed the YOOSEE IP camera in front of door,can open the IP camera to two way talk.
13.Can store 6 alarm call phone No.+2 alarm SMS phone No
14.Arm/alarm Delay for each defense zone. Timed arm/disarm function
15.Built-in rechargeable battery&nbsp;
16.The host support Monitoring and two-way intercom function.

 Packaging  	 standard package : 	 ①alarm host*1pcs
	②wireless motion sensor*1pcs
	③wireless door/window contact*1pcs
	④ remote controller *2pcs
	⑤ Doorbell button*1pcs
	⑥ AC power adapter*1*1pcs  

My Sourcing

Unfollow this supplier?

Unfollow this supplier?