Electronics

elec

Find Electronics from the best B2B online marketplace. Find a reliable Electronics supplier, vendor, manufacturer or distributor to get free quote on HKTDC Sourcing.

Electronics Suppliers and Manufacturers

Xiamen Rongta Trade Co., Ltd.

   &nbsp;Print 	Printing Method	9 pins serial impact dot matrix   Printing Speed	4.4lines/sec   Printing density	210 dots(whole dots)/420 dots (half dots)   Effective Printing Width	42CPL(7X9)/35CPL(9X9); 40CPL(7X9)/33CPL(9X9)   Detection Method	Paper out alarm	Support   Overheat protection	Support   Black mark priting	Support   Interface	USB, Serial, Parallel, Ethernet   Drawer port	1 port, DC24V, 1A, 6 line RJ-11 socket   Reliability 	MCBF	9,000,000 lines   Power Supply	DC power supply	Input DC 24V/2.5A   Ribbon	Ribon cassette	ERC-39 color: purple/ black/ red and black double ribbon   Printing Paper	Paper type	High quality 1 layer ordinary continuous paper or 2-3 layers copy paper   Paper width	76&plusmn;0.5 mm   Paper Thickness	Single-layer paper thickness:0.06-0.085mm; Multi-layer paper thickness: 0.05-0.08mm, Total thickness &lt;0.20mm.   Paper roll diameter	75 mm (Outside Diameter); 12 mm (Inside Diameter)   Paper loading way	Not easy loading, with auto feeding function   Paper cutting way	Manual tearing or auto cut   Physical	Operating Temperature (&deg;C)	0 to 50   Operating Humidity (%)	10 to 80 (relative humidity)   Storage Temperature (&deg;C)	-20 to 60   Storage Humidity (%)	10 to 90 (relative humidity)   Dimension	Outer size(L x W x H)	251x160x138 (mm)   Application	Restaurants, Department Stores, Kitchens, Convenience Stores, Specialty Retails, Super markets  

Impact Dot Matrix Printer with Cutter and Double Color Printing

Xiamen Cashino Electronic Technology Co Ltd

This thermal printer comes with a black finish. The paper feeding angle is available at either 90&nbsp;or 180 degrees for enhanced flexibility. The thermal printer operates more quietly and consumes less power than dot matrix printers.

 
  Compact design. 
  90/180 degree paper feeding angle. 
  Low noise. 
 

Thermal Printer

Nito Office Machines Limited

 	 This electronic time recorder guarantees ease of use and installation, and requires little maintenance. 	 This time recording device helps to keep track of the employee&#39;s access. 	 This recorder tells accutare time in large digits for easy-reading. Total hour calculation and 9-pin dot-matrix printer. 7 Kinds of printing languages. Perpetual calendar and daylight-saving Punch hole time recorder  

NT-8300 Electronic Time Recorder

Softland India Limited

Featured is an ultra-compact and rugged serial 24/32 column mini printer for all types of environments. It is compatible with dot matrix/thermal printing technology with superior performance. This multi-purpose mini printer will serve your billing and ticketing needs.&nbsp;
 
  Weight: 400g. 
  Powered&nbsp;by rechargeable battery. 
 

Mini Printer

This is an electronic calculating time recorder that comes with a neat and clean appearance. It is sturdily constructed for enhanced durability. The digital screen displays the information clearly.
 
  Total hour calculation. 
  9-pin dot-matrix printer. 
  7 kinds of printing languages. 
  Perpetual calendar and daylight saving. 
  Punch hole time card. 
 

Electronic Calculating Time Recorder

BIXOLON

  This desktop impact printer comes in a compact design. The reliable-and-fast printing feature promises smooth operation of your business. This printer is suitable for retailers, restaurants, hotels and so on.    
 
   Prints receipts and kitchen orders.    
   Efficient and powerful.  
 

Desktop Impact Printer

MIKI BYORA SCREWS CO LTD

This cost effective printer is able to rewrite tags and cards within easy steps, contributing towards environmental protection. The cards are reinforced for greater durability to support reuse. Mass printing is made possible by loading cards in the designated compartment.   Computerized re-writing of data on the surface is easy to achieve.   By loading cards in the bin, continuous printing is possible. (MT-2100H)   With priority on quality, durability of cards is strengthened.   Environmentally friendly equipment that sets to reduce waste.  

RFID Printer

Xiamen PRT Technology Co Ltd

print method:thermal dot line printing Dots per line:576 dots Resolution:8 dots/mm print width:72mm paper width:80mm W*D*H(mm):91.7*32.7*15.5 Weight:91g Maximum printing speed:70mm/s Paper feed pitch:0.0625mm Head temperature detection:Via thermistor

Thermal Printer Mechanism

Print method:thermal dot line printing Dots per line:1728 dots Resolution:8 dots/mm Print width:216mm Paper width:210~217mm Paper feed pitch:0.125mm

Medical Printer Mechanism

Print method:thermal dot line printing Dots per line:640 dots Resolution:8 dots/mm Print width:80mm(Max) 72mm(Recommended) Maximum printing speed:150 mm/s Paper feed pitch:0.0625mm Paper type:Thermal receipt paper/label paper Paper width:80mm Paper thickness:56~150um Head temperature detection:Via thermistor Paper end detection:Via transmission type photo interrupter Black mark detection:Via reflection type photo interrupter Platen open detection:Micro switch Cutter reset detection:Micro switch W*D*H(mm):126.76*91.9*56.4 Weight:503g

Kiosk Printer

Print method:Thermal dot line printing Dots per line:1152dots Resolution:8 dots/mm Print width:144 mm Paper width:150mm W*D*H(mm):180.7*53.8*40.8 Maximum printing speed:85mm/s Weight:422g Paper feed pitch:0.125mm

Shenzhen ZKC Software Technology Co., Ltd.

ZKC5804 Portable bluetooth thermal printer receipt printer is a new printer,The printer uses a larger capacity 1400mAh battery, a charge to use the time longer, and has a larger paper warehouse, while adhering to the ZKC series features: the use of new technologylithium batteries, 32 of ARMCPU the receipt printer high speed printing.

The product is tailor-made,so no inventory is available.

58mm Mobile Android Thermal Printer POS Printer

Dreamjetkorea Co., Ltd

 	 Model name: DREAMJET 600 	 Printing method : Ink Jet (RICOH Piezo Head) 	 Ink color :  1) Cyan, magenta, yellow, black,
Light black, light black, light magenta, light cyan
2) UV : CMYK + white, varnish, LC, LM 	 MAX. Resolution: 1200 X 2400 dpi 	 MAX. Printing size: 600 X 450 mm 	 MAX. Material thickness: 100 mm 	 Printer direction: Artificial intelligence-type Bi directional method 	 Environmental conditions: Temperature 10~35&deg;, humidity 20~80%RH 	 Editing S/W: Photoshop, Illustrator, Corel Draw, Bundle RIP 	 Interface: USB 2.0 	 Warranty: 1 year  

Digital Flatbed Printer

Changzhou Yuanpu Software Technology Co., Ltd.

The featured barcode printer offers a easy-to use and budget choice for industrial barcode printer. It comes with a high-precision design with dual-motor controlling for quality&nbsp;printing. The steel&nbsp;casing ensures stable performance and high durability of the&nbsp;machine.
 
  Sublimation and&nbsp;thermal printing. 
  New technology: 'REID'. 
  Long lifespan: 100km. 
  For heavy industries, like chemical,&nbsp;pharmaceutical, textile and electronic industries, and so on.&nbsp; 
 

Barcode Printer

Schmidt & Co (HK) Ltd

 	 Bring UHF RFID printing to your desktop. This small, easy-to-use printer delivers advanced features in a compact footprint for convenient, simple operation. 	 The ZD500R extends Zebra&rsquo;s broad range of RFID printers by adding UHF RFID printing and encoding to Zebra&rsquo;s line of industry-leading thermal desktop printers. Designed for applications where space is at a premium, the compact ZD500R offers simple, one-touch printing and encoding, straightforward loading, and automatic RFID calibration, making it ideal for applications where technical support staff is not available, such as retail in-store exception tagging. 	 RFID : Supports tags compatible with UHF EPC Gen 2 V1.2/ ISO 18000-6C 	 Print methods:&nbsp; Thermal Transfer or Direct Thermal 	 Programming Language:&nbsp; ZPL 	 Construction:&nbsp; Dual-wall frame 	 Prints and encodes tags with a minimum pitch of 0.6&Prime;/16 mm (without cutter option) 	 Adaptive Encoding Technology simplifies RFID setup and eliminates complex RFID placement guidelines 	 RFID job monitoring tools track RFID performance 	 RFID ZPL&reg; commands provide compatibility with existing Zebra RFID printers 	 Support for industry standard multi-vendor chip-based serialization (MCS) 	 Supports block permalocking of user memory compatible with ATA Spec 2000 	 Integrated ThingMagic&reg; RFID Reader/Encoder  

Zebra RFID Printer

Zebra Xi Series provides superior bar code printing solutions with high performance, longevity and unparalleled reliability in high-volume and mission critical production, ideal for shipping, warehousing and manufacturing use. Its 300 distinct darkness allows the smallest fine-tuning for ultra high quality printing.&nbsp;The upgraded memory also supports various label formats, graphics, fonts and data.&nbsp;170Xi III Plus&nbsp;is designed for&nbsp;printing large numbers of tough, information-rich labels on demand or in batches. 
  Maximum Print Area: Width: 6.6&quot;/168mm; Length: 39&quot;/991mm.  Resolution: 203 dpi/8 dots per mm; 300 dpi/12 dots per mm.  Maximum Print Speed: 203 dpi: 12&quot;/305 mm per sec; 300 dpi: 8&quot;/203 mm per sec.  

Bar Code Printer 

Shenzhen KingPek Technologies Co., Ltd

This is a high-quality label printer with a heat-transfer print mode. It is professionally engineered to deliver reliable and stable performance. The robust housing can withstand daily wear and tear.
 
  Heat-transfer print mode. 
  Print resolution: 203dpi. 
  Print speed: 51mm/second. 
 

Label Printer

SMARTTECH PRODUCTION

 Print technology 
Direct-to-card dye-sublimation/resin thermal transfer
 Print capabilities &nbsp;
One-sided (simplex) or optional two-sided (duplex) edge-to-edge printing
Full-color and monochrome printing capability in the same printer
Alphanumeric text, logos and digitized signatures; 1D/2D bar code images
Printer pooling/sharing (available soon)
 Print resolution &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
Standard mode: 300 x 300 dots per inch; standard text, bar code and graphics printing
High-quality mode: 300 x 600 dots per inch for enhanced text, bar code and graphics printing; 300 x 1200 dots per inch for enhanced text and bar code printing
256 shades per color panel
 Print speed&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
Full-color: Up to 220 cards per hour, one-sided (YMCKT); up to 165 cards per hour, two-sided (YMCKT-K)
Monochrome: Up to 1,000 cards per hour, one-sided (Black HQ)
 Card capacity &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
Automatic feed: 100-card input for 0.030 in. (0.76 mm) cards; 25-card output standard
Front exception card slot
Separate reject location and holding tray (two-sided printer model only)
Input hopper empty detection

Card Printer - Ribbon

Xiamen Wein Electronic Technology Co., Ltd

 Characters: 

 1. Low voltage supply 
The voltage used to drive the thermal printer head is equal to the logic voltage, or is driven by&nbsp;a 5 V single power line, the range of operating voltage is 4.2V-8.5V, so four to six NI-Cd batteriesor Ni-MH batteries can also be used. Two li-ion batteries can be used.
 2. Low volume Compact and light 
The mechanism is compact and light, dimensions: 68mm (width) * 24mm (depth) * 26mm(height).
 3. Printing with High resolution 
A high-density printer head of 8 dots/mm makes the printing clear and precise.
 4. High speed printing 
According to driving power and sensitivity of thermal paper, setting different printing speeds&nbsp;are required. Max printing speed is 70 mm/ sec.
 5. Easy paper loading 
Detachable rubber roller structure makes the paper loading easier.
 6. Low noise 
Thermal line dot printing is used to guarantee low-noise printing.


 Specifications:  	 &nbsp; 	  Printing method : &nbsp;thermal dot line printing. 	  Dot structure : &nbsp;384 dots/line. 	  Dot pitch : &nbsp;8 dots/mm. 	  Printing width : &nbsp;48mm. 	  Printing speed : &nbsp;70mm/s (max) 	  Paper width : &nbsp;58mm. 	  Paper thickness : &nbsp;60-100&mu;m. 	  Paper loading method : &nbsp;easy paper loading. 	  Paper feed pitch : &nbsp;0.0625mm 	  Printer head life : &nbsp;more than 50Km 	  Pulse activation life : &nbsp;110M pulse 	  Head temperature dectation :&nbsp;Thermister 	  Paper end /head position:&nbsp; Photo interrupter 	  Weight : &nbsp;32g. 	  Dimension : &nbsp;68*24*26 mm 	  Operating temperature : &nbsp;0-50℃. 	  Operating humidity : &nbsp;20-85% RH. 	  Storage temperature : &nbsp;-20-60℃. 	  Storage humidity : &nbsp;10-90% RH.  
&nbsp;

APS Compatible Thermal Printer Mechanism

This highlighted label printer mechanism is designed with a thermal dot line printing method with a resolution at 8 dots/mm and a maximum printing speed at 100 mm/s, so it ensures precise, clear and effective printing. It also supports both thermal label paper and thermal paper, rendering a versatile and multifunctional mechanism. Complete a range of top-quality label printers with this well-designed and premium label printer mechanism. Print method: thermal dot line printing.Paper type: thermal label paper or thermal paper.Print width: 56 mm.Dots per line: 448 dots.Resolution: 8 dots/mm.Paper width (Max): 62mm.Maximum printing speed: 100 mm/s.Paper feed pitch: 0.125 mm.Heater print voltage: 24 V.Life span:150 km.Size (W x D x H): 238.4 x 118.2 x 97.2 mm. 

Thermal Dot Line Printing Label Printing Mechanism 

Heng Yu Technology (HK) Ltd

This 58mm receipt printer comes in a miniature size and is easy to set up and use. It is compatible with ESC/POS system and can print at 50mm / sec or 14 rows / sec. The receipt printer is excellent for using in stores and ensures clear and fast printing. 	 Character density: 32 characters per 384 dots. 	 ASCII characters: 12 x 24 dots, 1.25mm x 3.00mm. 	 Chinese characters: 24 x 24 dots, 3.00mm x 3.00mm. 	 Speed: 50mm/sec or 14 rows/sec. 	 Interface: serial/parallel. 	 ESC/POS compatible. 	 Paper width: 57.5 +/-0.5mm (printable width: 48mm). 	 Max roll diameter: 65mm. 	 Paper thickness: 0.06mm ~ 0.08mm. 	 Power: DC 8.5V / 3A. 	 Cash drawer power: DC 12V / 1A. 	 MCBF: 500 million rows. 	 Miniature size.&nbsp; 	 Easy to set up and use.&nbsp; 	 Clear and fast printing. 	 Excellent for using in stores. 	 Weight: 0.8kg. 	 Support Win9X, WinME, Win2000, WinXP, compatible with EPSON, SAMSUNG driver.  

Mini Receipt Printer

The highlighted receipt printer is compatible with ESC/POS systems and can print 80mmj receipts. It offers simple buttoned operation and has excellent printing quality. This receipt printer is equipped with an automatic cutter and is ideal for retailing and restaurant use. 	 Character density: 48 characters per 576 dots. 	 ASCII characters: 12 x 24 dots, 1.25mm x 3.00mm. 	 Chinese characters: 24 x 24 dots, 3.00mm x 3.00mm. 	 Supported barcode: UPC-A, UPC-E, JAN13 (EAN13), JAN8 (EAN8), CODE39, ITF, CODABAR, CODE93, CODE128. 	 Speed: 220mm/sec or 58 rows/sec. 	 Interface: serial/parallel/USB/RJ-45. 	 ESC/POS compatible. 	 Paper width: 79.5 +/-0.5mm (printable width: 72mm). 	 Max roll diameter: 83mm. 	 Paper thickness: 0.06mm ~ 0.08mm. 	 Power: DC 24V / 3A. 	 Cash drawer power: DC 24V / 1A. 	 With fully/half automatic cutter. 	 MCBF: 3800 million rows. 	 Simple buttoned operation. 	 Excellent printing quality.&nbsp; 	 Ideal for retailing and restaurant use. 	 Weight: 1.4kg. 	 Support Win9X, WinME, Win2000, WinXP, compatible with EPSON, SAMSUNG driver.  

Receipt Printer

Featured here is a receipt printer for printing 58mm receipts. It is designed to support ESC/POs systems and is easy to set up. This receipt printer flaunts a high printing speed and is excellent for retail stores, supermarkets, restaurants, etc. 	 58mm receipt printer. 	 Character density: 32 characters per 384 dots. 	 ASCII characters: 12 x 24 dots, 1.25mm x 3.00mm. 	 Chinese characters: 24 x 24 dots, 3.00mm x 3.00mm. 	 Bar code supported: JAN13 (EAN13), JAN8 (EAN8), CODE39. 	 Speed: 90mm/sec or 24 rows/sec. 	 Interface: serial/parallel. 	 ESC/POS compatible. 	 Paper width: 57.5 +/-0.5mm (printable width: 48mm). 	 Max roll diameter: 75mm. 	 Paper thickness: 0.06mm ~ 0.08mm. 	 Power: DC 8.5V / 3A. 	 Cash drawer power: DC 12 / 1A. 	 MCBF: 500 million rows. 	 Easy to set up.&nbsp; 	 High printing speed&nbsp; 	 Excellent for retail stores, supermarkets, restaurants, etc. 	 Weight: 1.1kg. 	 Support Win9X, WinME, Win2000, WinXP, compatible with EPSON, SAMSUNG driver.  

Baoshare Electronic Co., Limited

 	 Connection Type: Bluetooth + USB 	 Commands: ESC / POS / TSPL / CPCL 	 Printing Width: 58 mm  

My Sourcing