Electronics

elec

Find Electronics from the best B2B online marketplace. Find a reliable Electronics supplier, vendor, manufacturer or distributor to get free quote on HKTDC Sourcing.

Electronics Suppliers and Manufacturers

Gen-Worldly Quartz Crystal Co Ltd

For wireless communication applications, medical imaging and ultra sound systems, RF broadcast systems, satellite teleport systems, military telecommunication satellites, advanced radar system etc.

Multi Pole Filter

For wireless communication applications, medical imaging and ultra sound systems, RF broadcast systems, satellite teleport systems, military telecommunications satellites, advanced radar system etc.

Single Pole Filter

 For wireless communication applications, medical imaging and ultra sound systems, RF broadcast systems, satellite teleport systems, military telecommunications satellites, advanced radar system etc. 

Tai-Saw Technology Co Ltd

RF SAW Filter: 100~2800MHz/ 5.0x5.0mm/3.8x3.8mm/3.0x3.0mm RF SAW Filter: 700~2600MHz/ 2.5x2.0mm/2.0x1.6mm/1.4x1.1mm/1.1x0.9mm SAW Duplexer: 400~2655MHz/ 5.0x5.0mm/3.8x3.8mm/2.5x2.0mm/2.0x1.6mm SAW Resonator: 300~2400MHz/5.0x5.0mm/5.0x3.5mm/3.8x3.8mm/3.0x3.0mm/2.5x2.0mm IF SAW Filter: 70~1000MHz/13.3x6.5mm/7.0x5.0mm/5.0x5.0mm

SAW Device: Saw Resonators, SAW Filter, Saw Oscillator, SAW Duplexer, VCSO

Sawnics Inc

These are LNA module antennas for all sorts of various uses. Their various designs are sure to suit patron's needs and requirements no matter what they are. All units are made using expert advice and designs.   High quality of manufacture ensures long product life  Super efficient and dependable  Suitable for all sorts of electronic appliances  

Saw Filter/Duplexer

This product is a Saw Filter/Duplexer for all purpose use. They come in various designs, forms, and sizes to suit consumer needs.   High quality of manufacture ensures long product life  Super efficient and dependable  Suitable for all sorts of electronic appliances  

LNA Module Antenna

The TN0089A is a front-end module (FEM) designed for GNSS including GPS, GLONASS, BeiDou, and Galileo applications. The TN0089A offers low noise figure, high linearity, and high out-band rejection characteristics brought by included high performance pre- SAW filter and low noise amplifier (LNA). The TN0089A can be operated from 1.5V to 3.3V single voltage. The TN0089A offers very small mounting area by included one SAW filter, only two external components, and very small package that is 1.5x1.1mm.

GPS, Glonass, Beidou and Galileo Front-End Module

Pictured is a CSP-type filter in a very compact size. This surface acoustic wave (SAW) filter is typically used in GPS&nbsp;and GLONASS applications. The rugged construction promises years of reliable performance. 	 Input power level: 10dBm. 	 Voltage: 3V DC.&nbsp; 	 Operating temperature: -30&deg;C to +85&deg;C. 	 Storage temperature: -40&deg;C to +85&deg;C.  

CSP-Type Filter

Foshan Amplitec Tech Development Co Ltd

 Features:    Convenient device to provide coverage for weak and blind DCS mobile signal zones to reduce drop/off calls.   Utilitarian design with simplistic yet modern appearance.   Simple installation process.   Suitable for one or two systems simultaneously.   Use advanced high linear IF saw filter technology.   Low consumption, low interference to BTS, high linear design and efficient fashion heat dissipation system.   Lowers cell phone power emissions and extends GSM phone battery life .   Use advanced high linear IF saw filter technology.   ALC can limit output power to ensure stable cell phone signal coverage.   MCG(Manual Gain Control) function, by 1dB/step to make the 1800 Mhz network signal coverage more flexible.   Can be controlled and monitored, via RS232 connects to PC for local control, via GSM modem connects to PC for remote control.   Apply to approximate 120000-520000 square meters coverage.   Perfect wireless outdoor repeater solution of DCS mobile signal extender.  Technical parameters:    Frequency: Uplink (1710-1785MHz), downlink (1805-1880MHz).   Gain: Uplink(85 &plusmn; 2dB), Downlink(90 &plusmn; 2dB).   Output power: uplink (27 &plusmn; 2dBm), downlink (40 &plusmn; 2dBm).   Power Consumption: &lt;150W   Power supply: AC: 220V/50Hz.   RF connector: N-Female.   Weight: &le;40kg.   Size: 400 x 520 x 214mm.  

DCS Outdoor Repeater

Changzhou Pioneer Electronic Co., Ltd.

 	 2-15mm clamp snap on rod EMI ferrite core 	 Description of EMI cable ferrite core 	 Rouble Cable EMI Suppression Core 	 Round Cable Snap-Its 	 ROHS compliance 	 Features of split clamp cable ferrite core 	 Helps reduce EMI on AC power lines. 	 Easy Structure and convenient installation. 	 Just clip it on and you will get clearer signal and faster data transmission. 	 Round cable snap-its can easily accommodate round cable or bundled wires with diameters from 2mm to 15mm. 	 These assemblies are available in four ferrite material classes to suppress differential or common-mode conducted EMI from 1MHz into the GHz region. 	 The polypropylene cases are meeting the ROHS restrictions of hazardous substances and have a flammability rating of UL94-VO. 	 Rouble cable snap-it assemblies are controlled for impedance only. The impedance listed are typical values. Minimum impedance. 	 Application of clamp cable ferrite core 	 All kinds of signal cables and power cables 	 Internal and external power cables 	 Internal cables between PC boards and data connectors 	 Computer peripherals, digital camera 	 DVD, fax machine cables, monitor cables 	 Power supply cables, and printer cables  

Clamp Snap on Rod EMI Ferrite Core

 	 High quality electric black plastic passive pin power line filter for pcb 	 PCB PIN EMI Filter Description  1.The PE1000 PCB filters is a single-phase filters designed for easy and fast PCB-mounting.
2.Rated currents from 0.5 to 10A.
3.Compact unit, light weight ,PCB through hole mounting.
4.High quality components ensure the safety and reliability of filters.
5.Optional metal or plastic housing.
6.Customized acceptable.
7.Optional DC version(D type). 	 PPIN PCB Mounting EMI Filter Application： 	 Single-phase power supplies ,swiych-mode power supplies. 	 Small to medium-sized machines and household equipment. 	 Electrical and electronic equipment. 	 Test and measurement equipment. 	 PIN PCB EMI FILTER Specification： 	 Rated Voltage:120/250VAC 	 Rated current:1A-6A 	 Operating Frequency:DC-60Hz 	 Temperature range:HPF25/085/21 	 Test Voltage(1min):Line to Ground 2000VAC 	 Line to Line:1450VDC  

Power Line Filter for PCB

 	 PE2100-20-06 AC filter single phase EMI EMC noise power filter 	 Features: 	 PE2300 single phase emi filter High performance with differential mode choke 	 Good low frequency attenuation 	 Available for inverter and variable speed motor device, which meet the RFI electromagnetic compatibility of European standards 	 Custom design acceptable 	 Typical Application: 	 Inverter 	 Variable frequency drive 	 Electrical and electronic equipment 	 Building automation 	 Industrial applications 	 Machinery 	 Electronic data processing equipment 	 Various noisy applications requiring good filter performance 	 Specification: 	 Rated Voltage：120/250VAC 	 Rated Current：6A~25A 	 Operating Frequency：50/60Hz 	 Temperature range：HPF 25/085/21 	 Leakage Current(Max)：Line To Ground:@250VAC 50Hz 	 Test Voltage(1 min)： 	 Line to Ground :2000VAC 	 Line to Line :1450VDC  

Single Phase Noise Power Filter

 	 PE7003-63-M6 1~250A feedthrough EMI line filter for shielding 	 Features:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 	 Feedthrough capacitors offer a high insertion loss a broad of frequencies from a few&nbsp; tens of kHz up to the GHz region 	 Very low internal series inductance 	 Very high self-resonant frequency 	 Self-healing dielectric 	 High quality and reliability 	 Through-bulkhead mounting 	 Anti-twist protection 	 Typical Application:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 	 Switching and cellular equipment 	 Computer servers 	 UPS power supplies 	 Increasing system and information security&nbsp; 	 AC Power line filter for 250VAC power lines 	 DC Power line filter for 480VDC battery power 	 Power supplies 	 Medical equipment 	 Shielded rooms 	 Specification: 	 Rated Voltage:80/250VDC 	 Rated Current:1A~250A 	 Operating Frequency: DC 	 Temperature range: HPF 40/085/56 	 Test Voltage(1 min): 	 250VAC@50/60Hz 	 80VDC~600VDC  

Feedthrough EMI Line Filter for Shielding

 	 EMI EMC power entry noise IEC Inlet low pass filter 	 Description&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 	 Compact unit, light weight, low price, easy to install 	 Rear/front or snap-in mounting.(S and S1 type) 	 High quality components ensure the safety and reliability of filters 	 Optional medical versions(B type)comply with the requirements of&nbsp;IEC/EN60601-1 for creepage and clearance, leakage current and high potential testing 	 Wide mounting flanges available 	 Typical Application： 	 Single-phase power supplies, switch-mode power supplies 	 Small to medium-sized machines and household equipment 	 Portable electrical and electronic equipment 	 Test and measurement equipment 	 Medical equipment 	 Specification： &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 	 Rated&nbsp;Voltage：120/250VAC 	 Rated&nbsp;Current：1A~10A 	 Operating&nbsp;Frequency：50/60Hz 	 Temperature&nbsp;range：HPF 25/085/21 	 Test&nbsp;Voltage(1&nbsp;min)： 	 Line&nbsp;to&nbsp;Ground&nbsp;:2000VAC 	 Line&nbsp;to&nbsp;Line&nbsp;:1450VDC  

Power Entry Noise Low Pass Filter

 EMC FILTER Three Phase High Performance Filter for Inverter PE3300 series  	 EMC FILTER Three Phase High Performance Filter for Inverter PE3300 series 	 Specification : Rated Voltage: 250/440/480 VAC Rated Current: 5A~1200 A Operating Frequency: 50/60 Hz Temperature range: 25/085/21 Test Voltage ( 1min ): Line to Ground: 1450 VAC Line to Line: 2700 VDC Leakage Current(Max) Line to Ground: @ 250 VAC 50Hz Description : Excellent interference suppression performance for CM and DM Wide working current range from 5A to 1200A High quality components ensure the safety and reliability of filters Various connection: bolt,busbar terminals Custom design acceptable 	 Typical Applications : High Interference Industrial Environment Three-phase variable speed motor drives and power drive systems(PDS) Inverters and converters Applications comprising energy conversion devices Process automation equipment HVAC equipment, elevators, power supplies, UPS and further three-phase applications  

EMC FILTER Three Phase High Performance Filter 

 Power Entry Module Filters with Fuses Holder and on/off Switch&nbsp;   	 The PE 8400 Series Power Entry Module Filters with Double Fuses Holder and on/off Switch 	 Specification : Rated Voltage: 120/250 VAC Rated Current: 1A 	 ~10A Operating Frequency: 50/60Hz Temperature Range: HPF 25/085/21 Test Voltage ( 1min ): Line to Ground: 2000 VAC Line to Line: 1450 VDC Description : The PE 8400 power entry module combines an IEC inlet, a mains filter with single or dualfuse holder and a 2-pole rocker switch in a small form factor. High conducted attenuation performance,based on chokes with high satur ation resistance and excellent thermal behavior. Rated currents up to 10A Rear/front or snap-in mounting. 	 Single or dual-fuse holder,available for fuses &Oslash;5 x 20mm 2-pole rocker switch. Optional medical version (B type) Snap-in versions (S type) Custom-specific versions are available on request. Typical Applications : Single-phase power supplies, switch-mode power supplies Test and measurement equipment Portable electrical and electronic equipment Consumer goods EDP and office equipment Medical equipment  

Power Entry Module Filters 

 EMI FILTERS Single Phase High Performance 250VAC 1A-1600A  	 Single phase EMI FILTER low pass filter PE2300-10-06 Rated Voltage 120/250VAC Rated Current 10A Operating Frequency 50/60Hz Temperature range HPF 25/085/21 Features: PE2300 single phase emi filter High performance with differential mode choke Good low frequency attenuation Available for inverter and variable speed motor device,which meet the RFI electromagnetic compatibility of European standards Custom design acceptable 	 Typical Application: Inverter Variable frequency drive Electrical and electronic equipment Building automation Industrial applications Machinery Electronic data processing equipment Various noisy applications requiering good filter performance  

EMI FILTERS Single Phase 

 	 PE5000-3-01 12V 48V 80V 250V DC emi noise waves low pass filter 	 What are the Product details? 	 Designed for DC power line 	 Excellent differential and common-mode attenuation 	 High performance, easy to install 	 Custom design acceptable 	 What are the applications of our EMI filter? 	 Available for all kinds of electronic equipment&rsquo;s and measuring instruments(DC side):switching power supply 	 Private Branch Exchange(PBX) 	 Data communication etc 	 What are the specifications EMI filter? 	 Rated Voltage：12/24/48/80/250VDC 	 Rated Current：600A 	 Operating Frequency：50/60Hz 	 Temperature range：HPF 25/085/21 	 Test Voltage(1 min)： 	 Line to Ground :350VDC 	 Line to Line :500VDC  

Noise Waves Low Pass Filter

Thai Lin Radio Coil Mfy Ltd 

 	 Encapsulated Common Mode Filter TL21~29 /TL81~29 Series 	 Specifications description 	 Current range: 0.3 - 12 mH 	 Inductance range: 0.2 - 82 mH 	 Rated Voltage: 250Vac 	 Dielectric Strength: 2500Vrms 	 Agency Approvals: VDE  

Encapsulated Common Mode Filter 

Hong Kong Caiqin Electronics Elements Co Ltd.

This dielectric resonator cavity filter (DRCF) is designed for selection of certain frequencies. It is suitable for use in many applications such as microwave telecommunication. It provides multiple options&nbsp;of&nbsp;frequencies for users to choose from. 	 For microwave telecommunication, radar, electronic counterwork, aviation and spaceflight, navigation, etc. 	 3G: 1,920-2,170MHz. 	 DCS: 1,710-1,825MHz. 	 GSM: 885-954MHz.  

Dielectric Resonator Cavity Filter

 	 Characteristic 	 Wide frequency range: DC~ 4GHz 	 0.05dB Chebyshev function 	 3dB standard bandwidth 0.5%-150% 	 Series：2~12 stages 	 Easy soldering, good solderability 	 Small size, stable reliable performance 	 Light weight  

LC Filter

This dielectric filter is specially manufactured with the options of dual channels or a single channel. It can selectively transmit one wavelength while reflecting others and can also allow you to select narrow-band and wide-band operations. The dielectric filter flaunts great design and quality and comes with 1 to 10 poles for maximum user convenience. Connection: 900MHz, 1,575MHz, 1,800MHz, 2,400MHz, 5,800MHz.Specially manufactured with the options of dual channels or a single channel. Can selectively transmit one wavelength while reflecting others.Allow you to select narrow-band and wide-band operations. Come with 1 to 10 poles for maximum user convenience.Great design and quality.

Dielectric Filter

Alink Co., Ltd.

 	 Metal coated conductive filter module 	 Filter materials: Aluminum coated conductive filter 	 Filter area: 0.07 square meter 	 Cleanable air volume: 1.3 cubic meter per minute 	 Application: air cleaning system  

Conductvie Filter Module

Shaanxi Huaxing Electronics Group Co Ltd

Good stop-band attenuation performance. Fluctuation band of small , low insertion loss. Good wide temperature performance, &nbsp;High reliability, vibration resistance &nbsp;Widely used in the defense and aerospace in a variety of electronic equipment and instruments

&nbsp;

My Sourcing