Electronics

elec

Find Electronics from the best B2B online marketplace. Find a reliable Electronics supplier, vendor, manufacturer or distributor to get free quote on HKTDC Sourcing.

Electronics Suppliers and Manufacturers

B K Z Int'l (HK) Enterprise Ltd

This power socket comes with two outlets in one box. It features a rugged construction and incorporates an integrated RCD system which is designed to provide your appliances with ground fault protection. This wall socket makes a safe power option ideal for hand-held electrical appliances and other equipment which moves while in operation. 	 Body material: PC. 	 Double outlets with safety buttons and status light indicator. 	 Rated voltage: 240V-50Hz. 	 Current rating: 13A max. 	 Rated trip current: 30mA. 	 Trip speed: less than 40ms. 	 Type: latching RCD-passive RCD, double pole. 	 Minimum back box depth: 35mm. 	 Standard: CE BS7288, BS1363. 	 Applications: fish tank, battery charger, drill, saw, jack-hammer, electric lawn mower, vacuum cleaner, fridge, freezer, extension lead, hair dryer, kitchen appliances, hand-held electrical appliances and equipment that moves while in operation. 	 Suitable for domestic, commercial and industrial use.  How latching RCDs work:
When the power is lost due to an earth fault, the RCD trips out and isolates the circuit it is protecting. It continuously compares the current flow in both the active (supply) and neutral (return) conductors of the circuit. When the current flow becomes unbalanced, some of the current in the active conductor leaks to earth without returning through the neutral conductor.

RCD Double Power Socket

Shown here is a wall socket that incorporates a built-in residual current device for maximum protection and safety. It has two &ldquo;Test&rdquo; and &ldquo;Reset&rdquo; buttons and a status indicator making it safe and easy to use. Designed to provide protection from the risk of electric shocks and fire, this power outlet is particularly suitable for portable electrical equipment used both indoors and outdoors.   Single power outlet with &ldquo;Test&rdquo; button, &ldquo;Reset&rdquo; button and status indicator.   Type: latching RCD-passive RCD, double pole.   Rated voltage: 240VAC.   Rated current: 13A max.   Frequency: 50Hz.   Trip current: 30mA.   Break time: 40mS max.   Voltage surge: 4K (100kHz ring wave).   Endurance: 3000 cycles/min.   Hit-pot: 2000V/min.   Standard: CE BS7288, BS1363.   Cable capacity: 3 x 2.5mm.   Minimum back box depth: 35mm.   Applications: fish tank, battery charger, drill, saw, jack-hammer, electric lawn mower, vacuum cleaner, fridge, freezer, extension lead, hair dryer, kitchen appliances, hand-held electrical appliances and equipment that moves while in operation.   Suitable for domestic, commercial and industrial use.  How latching RCDs work:
When the power is lost due to an earth fault, the RCD trips out and isolates the circuit it is protecting. It continuously compares the current flow in both the active (supply) and neutral (return) conductors of the circuit. When the current flow becomes unbalanced, some of the current in the active conductor leaks to earth without returning through the neutral conductor.

RCD Socket Outlet

   Rated voltage: 230V, 50Hz.   Current rating: 13A max.   Rated trip current: 30mA.   Trip speed: less than 40m/s.   Type: latching RCD-passive RCD, double pole.   Voltage surge: 4000 (100kHz ring wave).   Endurance: 3000 cycles min.   Hit-pot: 2000V min.   Cable capacity: 3 x 2.5mm&sup2;.   Minimum back box depth: 25mm.   Standard: CE, BS7288, BS1363.   Application: equipment, household appliances, etc.   Latching RCD (sometimes called passive) &ndash; when the power is lost due to an earth fault, the RCD trips out and isolates the circuit it is protecting. Latching RCD&rsquo;s do not trip during power cuts so they are great for fridges and freezers and also for protecting remote/unmanned areas. This would also make them ideal for protecting some heating equipment set to &ldquo;frost protection&rdquo;, fish tanks, battery charging, and the protection of remote or unmanned areas.  How RCDs work: 
   RCDs work on the principle &quot;what goes in must come out&quot;.   They operate by continuously comparing the current flow in both the active (supply) and neutral (return) conductors of an electrical circuit.   If the current flow becomes sufficiently unbalanced, some of the current in the active conductor is not returning through the neutral conductor and is leaking to earth.  Examples of equipment recommended to be protected by an RCD: 
   Hand held electric power tools, such as drills, saws and similar equipment.   Tools such as jack-hammers, electric lawn mowers.   Equipment on construction sites.   Equipment such as appliances which move while in operation, such as vacuum cleaners and floor polishers.   Appliances in wet areas such as kitchens, including kettles, jugs, frying pans, portable urns, food mixers/blenders.   Hand held appliances such as hair dryers, curling wands, electric knives, etc.   Cord extension leads.  

RCD Metal Socket

 	 BKZ0230SPW RCD BS switch, RCD UK switch, RCD British switch. 	 Type: latching RCD-passive RCD, double pole. 	 The RCD wall socket offers reliable performance over years. 	 The insulated housing ensures high safety. 	 This RCD wall socket is suitable for various electrical applications. 	 Rated voltage: 230V, 50Hz. 	 Rated current: 13A. 	 Trip current: 30mA. 	 Minimum back box depth: 35mm. 	 CE, BS7288 and BS1363 certified. 	 BS standard. 	 Latching RCD (sometimes called passive) &ndash; when the power is lost due to an earth fault, the RCD trips out and isolates the circuit it is protecting. Latching RCD&rsquo;s do not trip during power cuts so they are great for fridges and freezers and also for protecting remote/unmanned areas. 	 This would also make them ideal for protecting some heating equipment set to &ldquo;frost protection&rdquo;, fish tanks, battery charging, and the protection of remote or unmanned areas.  How RCDs work: 	 RCDs work on the principle &quot;what goes in must come out&quot;. They operate by continuously comparing the current flow in both the active (supply) and neutral (return) conductors of an electrical circuit. If the current flow becomes sufficiently unbalanced, some of the current in the active conductor is not returning through the neutral conductor and is leaking to earth.  Examples of equipment recommended to be protected by an RCD: 	 Hand held electric power tools, such as drills, saws and similar equipment. 	 Tools such as jack-hammers, electric lawn mowers. 	 Equipment on construction sites. 	 Equipment such as appliances which move while in operation, such as vacuum cleaners and floor polishers. 	 Appliances in wet areas such as kitchens, including kettles, jugs, frying pans, portable urns, food mixers/blenders. 	 Hand held appliances such as hair dryers, curling wands, electric knives, etc. 	 Cord extension leads.  

RCD BS Switch

Shenzhen eMylo Technology Co., Ltd.

 	 TRANSMITTER: 	 Operating Voltage: DC 12V 	 Operating Frequency: 433Mhz 	 Vibration Resistance: 334 	 Chip Type: 1527/2264 	 Modulation: ASK (Stable, less interference) 	 Encode Type: Group Coding 	 Battery Type:12V 27A(not included) 	 Remote Distance: 20m(Theoretical value) 	 Ambient TEMP: -30℃ -70℃, Humidity&lt;95% 	 Product DIM: 54x30x13mm   RECEIVER:  	 Input Voltage: AC 220V 	 Operating Frequency: 433Mhz 	 Operation Way: Inching/Momentary, Self-locking/Latched, Interlocked/Toggle 	 Coding Way: Intelligent Learning 	 Output Type: Active output 	 Max load: 1000W 	 Ambient TEMP: -20℃ -65℃, Humidity&lt;95% 	 Factory Default: Self locking 	 Board DIM: 69 x 49 x 17mm 	 Case DIM: 75 x 65 x 29mm   PACKAGE INCLUDES:  	 2 x &nbsp;Transmitters 	 1 x &nbsp;Receiver 	 1 x &nbsp;English Manual  
 THREE MODES:  	 Inching: press&amp;hold one button, the reply turns on, release the button, the reply turns off. 	 Self-lock: press the one button, the reply turns on, press the button again, the reply turns off. 	 Interlock: press the one button, the reply turns on, press the next button, the reply turns off.   Steps:  	 Clear:&nbsp;Press&amp;hold the program button on the receiver, the red light will turn on and stay on for about 5 seconds.   Choose the mode:  	 Inter-lock:release the button after the light flashes once. 	 Self-lock:release the button after the light flashes twice. 	 Inching:release the button after the light flashes three times.   Link the remote control:  	 Press the program button on the receiver until the red light turns on, and then release the program button, the red light will stay on. 	 Press a transmitter button, and the red light will flash, at this time, it means finished linking.  

AC 220v 1000w 2 Channel Wireless Relay with Transmitter

 	 BKZ0130PW RCD 1 gang socket. 	 Type: latching RCD-passive RCD, double pole. 	 Rated voltage: 230V AC. 	 Rated current: 13A max. 	 Frequency: 50Hz. 	 Trip current: 30mA. 	 Break time: 40m max. 	 Voltage surge: 4K (100kHz ring wave). 	 Endurance: 3000 cycles min. 	 Hit-pot: 2000V min. 	 Approval CE BS7288, BS1363. 	 Cable capacity: 3 x 2.5mm. 	 Minimum back box depth: 35mm 	 Application equipment, household appliances, etc. 	 Latching RCD (sometimes called passive) &ndash; when the power is lost due to an earth fault, the RCD trips out and isolates the circuit it is protecting. Latching RCD&rsquo;s do not trip during power cuts so they are great for fridges and freezers and also for protecting remote/unmanned areas. 	 This would also make them ideal for protecting some heating equipment set to &ldquo;frost protection&rdquo;, fish tanks, battery charging, and the protection of remote or unmanned areas.  How RCDs work: 	 RCDs work on the principle &quot;what goes in must come out&quot;. They operate by continuously comparing the current flow in both the active (supply) and neutral (return) conductors of an electrical circuit. If the current flow becomes sufficiently unbalanced, some of the current in the active conductor is not returning through the neutral conductor and is leaking to earth.  Examples of equipment recommended to be protected by an RCD: 	 Hand held electric power tools, such as drills, saws and similar equipment. 	 Tools such as jack-hammers, electric lawn mowers. 	 Equipment on construction sites. 	 Equipment such as appliances which move while in operation, such as vacuum cleaners and floor polishers. 	 Appliances in wet areas such as kitchens, including kettles, jugs, frying pans, portable urns, food mixers/blenders. 	 Hand held appliances such as hair dryers, curling wands, electric knives, etc. 	 Cord extension leads.  

RCD 1 Gang Socket

   BKZ0230SPW RCD switched socket, switch socket, socket switch.   Type: latching RCD-passive RCD, double pole.   The RCD wall socket offers reliable performance over years.   The insulated housing ensures high safety.   This RCD wall socket is suitable for various electrical applications.   Rated voltage: 230V, 50Hz.   Rated current: 13A.   Trip current: 30mA.   Speed: &lt;40ms.   Minimum back box depth: 35mm.   CE, BS7288 and BS1363 certified.   BS standard.   Latching RCD (sometimes called passive) &ndash; when the power is lost due to an earth fault, the RCD trips out and isolates the circuit it is protecting. Latching RCD&rsquo;s do not trip during power cuts so they are great for fridges and freezers and also for protecting remote/unmanned areas. This would also make them ideal for protecting some heating equipment set to &ldquo;frost protection&rdquo;, fish tanks, battery charging, and the protection of remote or unmanned areas.  How RCDs work: 
   RCDs work on the principle &quot;What goes in must come out&quot;. They operate by continuously comparing the current flow in both the active (supply) and neutral (return) conductors of an electrical circuit. If the current flow becomes sufficiently unbalanced, some of the current in the active conductor is not returning through the neutral conductor and is leaking to earth.  Examples of equipment recommended to be protected by an RCD: 
   Hand held electric power tools, such as drills, saws and similar equipment.   Tools such as jack-hammers, electric lawn mowers.   Equipment on construction sites.   Equipment such as appliances which move while in operation, such as vacuum cleaners and floor polishers.   Appliances in wet areas such as kitchens, including kettles, jugs, frying pans, portable urns, food mixers/blenders.   Hand held appliances such as hair dryers, curling wands, electric knives, etc.   Cord extension leads.  

RCD Switched Socket 

 	 Rated voltage: 230V AC. 	 Rated current: 13A max. 	 Frequency: 50Hz. 	 Tripping current: 30mA. 	 Tripping speed 40m/s max. 	 Type: latching RCD-passive RCD, double pole. 	 Voltage surge: 4K. 	 Endurance: 3000 cycles min. 	 Hit-pot: 2000V min. 	 Approval: CE BS7288, BS1363. 	 Cable capacity: 3 x 2.5m. 	 Minimum back box depth: 35mm. 	 IP rating: IP4X. 	 Application: equipment, household appliances, etc. 	 Latching RCD (sometimes called passive) &ndash; when the power is lost due to an earth fault, the RCD trips out and isolates the circuit it is protecting. Latching RCD&rsquo;s do not trip during power cuts so they are great for fridges and freezers and also for protecting remote/unmanned areas. This would also make them ideal for protecting some heating equipment set to &ldquo;frost protection&rdquo;, fish tanks, battery charging, and the protection of remote or unmanned areas.  How RCDs work: 	 RCDs work on the principle &quot;What goes in must come out&quot;. They operate by continuously comparing the current flow in both the active (supply) and neutral (return) conductors of an electrical circuit. If the current flow becomes sufficiently unbalanced, some of the current in the active conductor is not returning through the neutral conductor and is leaking to earth.  Examples of equipment recommended to be protected by an RCD: 	 Hand held electric power tools, such as drills, saws and similar equipment. 	 Tools such as jack-hammers, electric lawn mowers. 	 Equipment on construction sites. 	 Equipment such as appliances which move while in operation, such as vacuum cleaners and floor polishers. 	 Appliances in wet areas such as kitchens, including kettles, jugs, frying pans, portable urns, food mixers/blenders. 	 Hand held appliances such as hair dryers, curling wands, electric knives, etc. 	 Cord extension leads.  

My Sourcing