Electronics

elec

Find Electronics from the best B2B online marketplace. Find a reliable Electronics supplier, vendor, manufacturer or distributor to get free quote on HKTDC Sourcing.

Electronics Suppliers and Manufacturers

Firstsing Co Ltd

Mobile phone remote printing, not restricted by region, on business trips, office documents, learning materials, picture materials, one-click synchronous printing. Wide range of applications, such as home, study, office, data printing, etc. 24 pages per minute fast printing, first page printing only about 8 seconds Fast and clear printing, high-definition resolution up to 600*600dpi Various paper printing, such as plain paper, thin paper, thick paper, thick paper, cotton paper, colored paper, envelopes, transparencies, preprinted paper, recycled paper, bond paper, etc. 

BlueNEXT Laser printer copy all-in-one office small home students with homework a4 wireless wifi

T K Rich Co

   Ideal for the home &amp; workshop.   Comfort grip handle.   15 seconds heat up.   8 watts.  

Cordless Soldering Iron

Dongguan Longwei Instruments Co Ltd

 3 in 1 soldering station hot air gun and dc power supply&nbsp; 
Specification 	 Machine max power：&le;800W 	 Working temperature：0~40℃/32~104℉ 	 Storage temperature：-20~80℃/-4~176℉ 	 Storage humidity：35%~45% 	 Weight&amp;Size:3.95kg &nbsp;&nbsp;L235*W186*H124mm &plusmn;5mm 	 Hot air 	 Power:650W 	 Air type：Brushless fan is a gentle wind 	 Air flow：&le;120L/min 	 Temperature range：100℃~480℃/212℉~896℉ 	 Temperature stability：&plusmn;1℃（static） 	 Display：digital 	 Soldering station 	 Power:60W 	 Temperature range：200℃~480℃/392℉~896℉ 	 Temperature stability：&plusmn;2℃(static) 	 Tip over the ground voltage：﹤2mV 	 Tip over the ground pressure resistance：﹤20hm 	 Power supply 	 Power:30W 	 Output voltage：DC0V~15V&plusmn;10% 	 Load stability：﹤0.01&plusmn;2mv 	 Temperature coefficient：﹤300ppm/℃ 	 Ripple noise：﹤1mvrms(valid value) 	 Output current:DC 1mA-2A&plusmn;10%  Other function 	 USB output: DC 5V1A 	 Voltmeter:0-50VDC 	 Manual or automatic function:Yes 	 Dormancy:Yes  

3 in 1 Soldering Station

LPKF Laser & Electronics AG

The ProtoMat E33 is barely larger than a size A3 sheet of paper and is an economical and compact circuit board plotter for machining circuit boards without wet chemicals. This makes the system perfect for use in training or for limited budgets. The LPKF ProtoMat E33 will structure single-sided or double-sided circuit boards, drilling holes for through-plating, cutting individual boards from the base material and can even engrave front plates for housings. 	 The system is robust and intended for application areas where time is not particularly of the essence. 	 And yet the LPKF ProtoMat E33 doesn&rsquo;t need to shy away from having its structuring results compared to those of its big brothers. 	 Still the system is easy to use. 	 The &ndash; included &ndash; software effectively supports users with the machining process. 	 Manual tool holder; all common drilling and milling tools are quickly and easily ready for use. 	 33,000rpm spindle speed Like all ProtoMats each ProtoMat E33 is carefully calibrated at the LPKF factory. 	 This ensures it will produce the finest structures in any common material. 	 With a maximum travel speed of 60 mm per second (approx. 2&rdquo;/s) and a spindle speed of 33,000rpm the E33 is the perfect entry-level model for in-house prototyping.  

Circuit Board Plotter

Foshan Golden Milky Way Intelligent Equipment Co Ltd

1.Rolling speed: 2~12r/pm, CVT adjustable.

2.Roller material: 9 Cr2Mo, Roller surface hardness: HRC 65~68

3.Gap adjustment method: Servo motor drive the middle wedge to adjust, mechanical self-locking.
Roller gap adjustment range: 0~2mm

4.Roller gap adjustment accuracy:1&mu;m

5. one year warranty, technicians are available for oversea service.

Lithium Battery Rolling Machine

Fujia Machine Equipment Co.,Ltd

Technical Data: 	 Power : AC 220/50HZ 	 Servo Accuracy:&plusmn;0.02mm 	 Air Pressure:0.5-0.7Mpa 	 Temp：0-200℃ (Adjustable) 	 Servo Range:150mm-300mm (Adjustable) 	 Size：750*110*1750mm 	 Machine N.W：200KG  

Headset Outer Ring Folding Machine

 Intelligent Digital Welding Machine, Lead-Free ESD Electric Soldering Station  
Applications:&nbsp; 	 1. Temperature locking. 	 2.&nbsp;Beep alarm function available. 	 3. MCU controlled temperature calibration. 	 4. Simulate bar indicating heating up status. 	 5. Temperature read out in ℃ and ℉ 	 6. Separate iron stand to save room and to make easier deposit. 	 7.&nbsp;User-friendly menu enables system setting easier.. 	 8.&nbsp;Buttons (1,2,3) for pre-setting or switching frequently used temperature. 	 9.&nbsp;Soldering tip designed separate from heater and using exchangeable 900M series to save use-cost.  &nbsp;Feature:&nbsp; 	 1. Automatic sleep to save energy. 	 2. Long life. 	 3. Smart recognition of working or non-working status. 	 4. Automatic standby,shuutdown with smart time setting. 	 5.&nbsp;High performance dual-core wire heater. 	 6. New design with LCD display screen, making control&nbsp;visualization. 	 7. Low-voltage heater separated from power supply to keep soldering work safer.  

Intelligent Digital Welding Machine

The LPKF ProtoMat S103 circuit board plotter for producing PCB prototypes and small batches is configured specifically for RF and microwave requirements. The touchless, pneumatic depth limiter further allows delicate surfaces, soft and flexible substrates to be processed. The ProtoMat S103 also carefully depanels irregularly shaped flexible circuit boards from larger boards. The sophisticated Z-axis drive makes the ProtoMat S103 perfect for finishing front panels and housings as well as depth milling microwave PCBs. Even machining populated PCBs is no problem at all. The ProtoMat S103 is extremely fast and accurate with a spindle speed of 100,000rpm, a maximum travel speed of 150 mm/s and a resolution of 0.5&mu;m. This ensures the accuracy required for drilling and milling ultra fine structures, especially for high-end applications in the RF- and microwave field. CircuitPro turns raw CAD data into a dataset for populating the circuit board with soldering paste with no additional expense. The software wizard guides the user through the individual process steps. An internal computation accounts for the pad shape and size to ensure that each pad has the right amount of soldering paste. This is further achieved through proven process parameters. The paste is applied with the built-in dispenser, all without having to convert the machine. 	 LPKF ProtoMat S103. 	 2.5-dimensional operation with Z-axis control. 	 100,000 rpm spindle motor.  

PCB Plotter

 	 The LPKF ProtoFlow S oven, with lead free capability, has significant advantages over previous models and rich features including a PC control software package. Several user programmable zones between preheating and final reflow enable the LPKF ProtoFlow S to process all reflow profiles up to 320. 	 The reflow process can also be observed through a large glass window assisting the operator to optimize the process parameters. Ideal for prototyping, technology research and pre-production runs the LPKF ProtoFlow S is a high tech, user friendly, reflow oven with many pre-programmed process profiles which can be easily selected via the LCD display and keypad. 	 The intuitive software package enabling process parameters to be conveniently changed, managed and archived on a PC, completes the user friendly control features of this sophisticated desktop reflow oven. 	 An external connection with digital flow meter for inert gas is available for the LPKF ProtoFlow S/N2. The nitrogen atmosphere significantly reduces the oxidation during the soldering process, and ensures better solder joint results. 	 The LPKF ProtoFlow S and ProtoFlow S/N2 can be fitted with a Profile recorder module for measuring temperatures of particular areas or components on the PCB by using four thermocouple probes. The temperature profile is displayed in real time on the PC.  

LPKF ProtoFlow S

Yujin Robot Co Ltd

iRobi Q is a content-customizable intelligence service robot based on the network.&nbsp;It was developed to provide convenient and quality services for kids and the elderly. The service field is thoughtfully customized for various regions owing to the robot application interface, script editor, 3D&nbsp;simulator, etc. Keep in pace with the fast-changing digital age with this network service robot.
 
  Based on Windows XP. 
  High technology. 
 

Network Service Robot

I-BIT CO LTD

Featured is a high speed inspection wafer bump inspection equipment. This equipment is the automatic X-ray equipment&nbsp;that provides void detection of solder bump. The precise and professional design guarantees reliable performance.

 
  This equipment is the automatic X-ray equipment which provides void detection of solder bump.&nbsp; 
  It penetrates by using void (bubble) in the wafer and using X-rays, and the automatic judgment inspection. 
  Quality of void more than a standard value. 
  Done from the transfer imaging for the diameter of void (area). 
 

Automatic X-Ray Equipment

This automatic X-Ray equipment features an in-line design, which&nbsp;enables defect detection of invisible part of PCB. It allows the automatic inspection of solder bump by using X-ray. This inspection equipment is&nbsp;a helpful and user-friendly addition to your business.
 
  Automatic X-ray inspection equipment in-line type FX-355. 
  Enable the automatic inspection of solder bump of either BGA or CSP by using X-ray. 
  This back chip is deleted, it inspects, and the&nbsp;body part is extracted individually. 
 

X-Ray Automatic Inspection Equipment

Progroup Cellular

This is an LCD digitizer separator for repairing LCD products. In a sturdy housing, this professionally designed LCD digitizer separator is efficient and accurate. This high quality LCD digitizer separator features a user-friendly control panel.
 
  Repair LCD products. 
  High quality. 
  Easy to use. 
 

LCD Digitizer Separator

Donguan Province Changan Sanyuen Hardware Machine Business Department

According to American Federal Standard, a clean room is &ldquo;a room in which the quantity of particles floating in the air and, when necessary, the temperature, humidity, and pressure, can be controlled, the main objective of the dust in given room is determined according to the requirements of the products to be handled in the room.

(A) Cleanliness and the number of ventilation cycles. The cleanliness of the room depends upon the number of ventilation cycles performed per unit time. The structure should be contrived so that the air flow os disturbed as little as possible and due care should be taken to prevent the accumulation of dust on surfaces anywhere in the clean room, In order to maintain the cleanliness of the room, the inflow of contaminating particles from outside must be prevented. To obtain the required room pressure, outside air of appropriate quality and quantity is necessary.

(B) Material and auxiliary equipment for clean room Material that is not susceptible to cracking or the adherence of particles and which creates little dust is employed for the ceiling, walls and floor. When necessary, such auxiliary equipment as air showers in the entrances and pass-boxes in the walls must be installed.

(C) Control of personnel and materials Personnel, and materials brought, are the main sources of dust in clean rooms, so adequate controls must be adopted. For example, all personnel should be made to pass through air showers and change into dust-free clothes before entering clean rooms.

(D) Other facilities According to the work to be performed water supply and drainage facilities and electricity and gas supplies may be necessary. There facilities and related equipment should be easy to use should be designed in such a way as to avoid and deterioration in the air cleaning performance of the system. Because Clean Room is completely closed, measures to take in case of emergencies such as a fire, a power failure, must be fully considered.

(E) The first decision you&rsquo;ll face is choosing between a manufactured modular cleanroom and a conventional construction cleanroom. A manufactured modular cleanroom is custom built at the vendor&rsquo;s factory and assembled at your facility, while a conventional construction cleanroom need and consider the return on your investment.

(F) To determine usage requirements, estimate how many people will work in the cleanroom and how often they will enter and exit. The size and amount of furniture and equipment must also be considered. These requirement will help you to determine the size of cleanroom you need.

Clean Room

Hong Kong Loobot Technology Limited

 	 Loobot Elderly care robot provides a holistic solution for elderly people with different levels of disabilities.  

Pandabot Dementia Therapy Robot

Psychological &amp; physical health care AI solution 	 Emotion monitoring 	 Dementia therapy 	 Memory practice 	 Entertainment  Voice Chat 	 Entertainment 	 Video call  Smart Photo Album 	 Memory game 	 SNS platform  Emotion monitoring engine
--Mental health maintenance

Mental health monitoring and interfering

Care APP: 	 Emotional diary 	 Health monitoring 	 SOS alarm  

Elderly Robot

Dogugonggan Co., Ltd.

 	 We, Dogugonggan have been developing autonomous vehicles and special-purpose autonomous mobile robots. Our main competitors include Autonomous Stuff and Polysync for autonomous vehicle development, and Knightscope for security robots. 	 With Autonomous Stuff (A Stuff) and Polysync, there is a difference in the type of vehicle we are supporting. 	 A Stuff&#39;s autonomous car remodeling and development are made up of cars from such as Lexus and Lincoln, but we are developing autonomous driving vehicles using Hyundai-Kia Automotive products. Together with e-Autobahn, a partner in Korea, we are remodeling and developing more than 30 autonomous vehicles per year. 	 At CES, I would like to introduce it as a self-driving car after market product for the first time from Korea.&nbsp; 	 The special purpose of the autonomous mobile robot is a security robot. They are self-driving technology based teleoperating robot platform which is one step ahead from fully autonomous mobile robot such as Knightscope. 	 We have original patents and technology. Our clients can connect robots and control robots safely and without any sense of difference if they have designated authority anywhere in the world.  

Autonomous Security Robot

Ekaly Toys Trading Limited

 	 Alloy recording robot with light &amp; sound  

Talking Robot

 150W Lead-free antistatic advanced electric welding machine
High Frequency Soldering Station 
Applications:&nbsp; 	 1. Digital soldering station with new appearance design, big LED screen, for clear and convenient reading. 	 2. PID power control loop with constant temperature set by MCU computer for more precision temperature control. 	 3. Imported temperature-beard materials electromagnetic heater, high frequency eddy current heating, large heating power, and quickly back to the temperature. 	 4. It is convenient that the device adopt three programmable knobs in different condition. 	 5. Display the temperature between Fahrenheit and Celsius flexibly , convenient for the type of operators. 	 6. Computerized temperature calibration can correct the difference between the actual and display temperature quickly. 	 7. Heating element malfunction alert.  Feature:&nbsp; 	 1. HD LCD, display with backlight, visualized control and easy to use. 	 2. High frequency eddy-current heating, high power design, fast temperature rise and temperature returning. 	 3. Immediate temperature access facility and quick switch of service temperature. 	 4. Digital temperature correction, and simple and easy to operate. 	 5. Intelligent temperature-controlled fan, and suitable for the operation of strength welding. 	 6. Automatic dormancy and fault display function.  &nbsp;Technical Specification:&nbsp; 	 1. Power consumption:150W 	 2. Input voltage:220VAC&plusmn;10% 50Hz(110VAC 60Hz optional) 	 3. Heater voltage:28VAC 	 4. Temperature range: 150&ordm;C~500&ordm;C(302&ordm;F~932&ordm;F) 	 5. Calibration range:-50&ordm;C~+50&ordm;C(-58&ordm;F~+122&ordm;F) 	 6. Temperature stability:&plusmn;2&ordm;C(still air,no load) 	 7. Temperature accuracy:&plusmn;10&ordm;C 	 8. Tip to ground impedance:&lt;2&Omega; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 	 9. Tip to ground potential:&lt;2mV 	 10. Setting manner:buttons 	 11. Heater:150DH high frequency eddy current heating element 	 12. Dimension:L161 x W126 x H102mm 	 13. Net weight:1.8kg  

High Frequency Soldering Station

P & N Technology (Xiamen) Co., Ltd.

  parmeter:PCmax:71w Current:3.8A Voltage:2.4v Fan position:hot&amp;cold side Power Input:91w COP:0.78
Ambient:-10~52℃
Packaging &amp; Delivery  Packaging Detail:  Loaded into trays(hard pearl cotton) and packed into cardboard boxes for peltier cooler. 
 Delivery Detail:  within 2-15days for peltier air conditioner    Specifications 
 peltier air conditioner,&nbsp;
environmental protection, light weight, no wear, no noise, no refrigerant lea
  Features:   
  1.&nbsp;higher&nbsp;cooling&nbsp;efficiency&nbsp;and&nbsp;longer&nbsp;working&nbsp;time.  
  2.&nbsp;Top&nbsp;quality&nbsp;&amp;&nbsp;competitive&nbsp;price.&nbsp;  
  3.&nbsp;Small&nbsp;size&amp;Easy&nbsp;to&nbsp;operate,&nbsp;Eco-friendly.&nbsp;  
  4.&nbsp;&nbsp;All&nbsp;products&nbsp;are&nbsp;RoHS&nbsp;and&nbsp;REACH&nbsp;compliant.  
  5.&nbsp;SGS&nbsp;ISO9001&nbsp;verified.&nbsp;  
  6.&nbsp;Customizable&nbsp;  
  --------------------------------------   

Semiconductor Parts

 3 in 1 soldering station hot air gun and suction tin device&nbsp; 
Application 	 1.&nbsp;industrial production of electronic products assembly 	 2.research department for product development 	 3.all enterprises and institutions electrician for soldering operation 	 4.&nbsp;teaching practice 	 5.electronic product maintenance repair industry 	 6.list for electronic assembly technology enthusiasts  Feature
Soldering station 	 1.soldering station with silver alloy thermal conductive materials and thermal conduction mode, high speed back to temperature, only takes 10 seconds to boot from room temperature to 350 ℃. 	 2.welding head and heater fission design, saving the cost. 	 3.&nbsp;sensor front, high precision temperature control, temperature stability is good. 	 4.the welding handle light, use comfortable. &nbsp;  Suction tin soldering station 	 1.absorption tin soldering station heater with 36 vac output low voltage power supply and main power supply is a transformer isolation, safe and reliable. 	 2.&nbsp;the built-in vacuum pump, the suction is strong. &nbsp;  &nbsp;Hot air desoldering station 	 1.intelligent cooling system, automatic shutdown can delay supply, greatly prolong the service life of heater and the handle. 	 2.using spiral heater, longer service life. 	 3.&nbsp;the heat gun handle parts, blow out the air volume is more even, and not easy to damage, easy to maintain and storage.  Specification: 	 MODEL： 	 LW-800 	 Input voltage： 	 220VAC&plusmn;10% &nbsp;&nbsp;50/60HZ 	 Machine power： 	 800W（Max） 	 Noise： 	 &lt;52Db(A) 	 Working temperature： 	 0℃~40℃ 	 Type： 	 Hot air desoldering station 	 Soldering station 	 Suction tin soldering station 	 Power: 	 550W&nbsp;,pump25W 	 90W 	 150W,pump 15W 	 Temperature range： 	 100℃~500℃ 	 100℃~500℃ 	 300℃~500℃ 	 School Tem range： 	 &plusmn;50℃ 	 &plusmn;50℃ 	 &plusmn;50℃ 	 Temperature stability 	 &plusmn;5℃ 	 &plusmn;2℃ 	 &plusmn;2℃ 	 Heater voltage： 	 24VAC 	 Tip over the ground impedance： 	 &lt;2&Omega; 	 Tip of reactance： 	 &lt;2mV 	 Suction nozzle to ground impedance： 	 &lt;2&Omega; 	 The suction nozzle of reactance： 	 &lt;2mV 	 Vacuum pressure： 	 600mmHg 	 Tin suction pump 	 diaphragm 	 Max air flow： 	 23L/min 	 Air gear： 	 020~99gear 	 Air supply type： 	 Diaphragm chamber air pump 	 Dormancy： 	 1-99min can be set 	 1-99min 	 Packing size&amp;N.W. 	 48.5&times;39.3&times;26（cm  

Hangzhou NeoDen Technology Co Ltd

Technical parameters 	 Items 	 NeoDen&nbsp; PM3040 	 Dimensions 	 580&times;320&times;260(mm) 	 Platform Size 	 300&times;400(mm) 	 PCB Size 	 250&times;300(mm) 	 Template Size 	 370&times;470(mm) 	 Printing speed 	 Labor control 	 PCB Thickness 	 0~100(mm) 	 PCB Tuning range 	 Front/ Side +10mm 	 Platform height 	 180(mm) 	 Repeatability 	 &plusmn;0.01mm 	 Positioning mode 	 Outside/Reference hole 	 Fine Adjustment Range 	 Z-axis &plusmn;45mm&nbsp; X-axis &plusmn;35mm&nbsp; Y-axis &plusmn;45mm 	 Weight 	 14Kg  

PM3040 NeoDen High Precision Stencil Printer

GUANGZHOU YI TONG MACHINERY IND'L CO LTD

 	 Table size (mm): 600x500. 	 Travel longitude(X) (mm): 600. 	 Travel crossward (Y) (mm): 500. 	 Travel vertical (Z) (mm): 250. 	 Gantry width (mm): 760. 	 Spindle taper: ER20/ER25 or BT30. 	 Spindle rotation speed (rpm): 500-24000. 	 Spindle motor (kw): 3.2/4.0/5.5. 	 X Y Z axis servo motor (kw): 0.85. 	 Distance between tool head and table (mm): 50-300. 	 X Y Z axis feed speed (m/min): 8. 	 X Y Z axis rapid speed (m/min): 10. 	 Net weight (kg): 2800. 	 Maximum load of table (kg): 300. 	 Stock available: 100.  CNC Engraving machine
HIGH SPEED,HIGH PRECISION AND DURABLE QUALITY

High quality die casting,gantry frame with high rigid finning design which applicable for fast speed running.

Independent coolant system of spindle to assure stability and durability of spindle.

Imported brand linear guidway,ball screw,Japan servo motor and drive to assure high accurancy and stable performance.

4 axis and 5axis could be customized.

CNC Engraving Machine

1.High revolution speed, linear speed up to 23M/s.
Low noise, one meter away noise &lt; 80 dBA.

2. High sealing. Three sets of mechanical sealing along with soft and hard sealing.

3. Low clearance (2L----1500L)&nbsp; Clearance between stirrer and stirrer: 2--7mm,
Clearance between Stirrer and vessel wall: 2--7mm, Stirrer and vessel bottom: 2--6mm.

4. One year warranty. Technicians are available for oversea service.

My Sourcing