Electronics

elec

Find Electronics from the best B2B online marketplace. Find a reliable Electronics supplier, vendor, manufacturer or distributor to get free quote on HKTDC Sourcing.

Electronics Suppliers and Manufacturers

AEI Protect-On Systems Ltd

DK-2872 MK-II+ is a self-contained three output relay (Wi-Fi) Keypad. It combines the digital keypad and proximity EM card reader in one unit. The keypad compatible with three operation modes: (1) Stand-Alone Mode – Keypad and Electric Lock (2) Multi-Station Mode – Keypad, Auxiliary Keypad and Electric Lock (3) Split-Decoded Mode – Keypad, Split Decoder and Electric Lock In these three-operation modes, split decode has the highest security protection for home and office. Further, the keypad can be upgraded with the Wi-Fi Module to gain more features, such as remote control, receive &amp; record checking and setting password via mobile app.  Features: Three relay output for door lock and equipment controlBuilt-in real-time clock for inhibition modeOptional multi-station, split-decode and Wi-Fi socket for expansion26-bit, 34-bit or 37-bit Wiegand data outputDifferent levels of user modeInterlock for dual keypad installationDuress and alarm output for external deviceVisitor and temporary password programable with timeOutput relay change be toggle or time modeBuilt-in tamper switchBack-lit silicon rubber keytopApp compatible for remote control, receive alarm message and password settingSuitable installation on wall

Wi-Fi Access Control Keypad

DK-2865 MK-II+ is a self-contained single output relay (Wi-Fi) Keypad. It combines the digital keypad and proximity EM card reader in one unit. The keypad compatible with three operation modes: (1) Stand-Alone Mode – Keypad and Electric Lock (2) Multi-Station Mode – Keypad, Auxiliary Keypad and Electric Lock (3) Split-Decoded Mode – Keypad, Split Decoder and Electric Lock In these three-operation modes, split decode has the highest security protection for home and office. Further, the keypad can be upgraded with the Wi-Fi Module to gain more features, such as remote control, receive &amp; record checking and setting password via mobile app.  Features: Single relay output for door lockBuilt-in real-time clock for inhibition modeOptional multi-station, split-decode and Wi-Fi socket for expansionDifferent levels of user modeVisitor and temporary password programable with timeOutput relay change be toggle or time modeBuilt-in tamper switchBack-lit tact switch keytopApp compatible for remote control, receive alarm message and password settingSuitable installation on wall

DK-2881 MK-II+ is a self-contained three output relay, vandal-resistant and weatherproof (Wi-Fi) Keypad. It is the digital keypad. DK-2881GA– Three output surface / gooseneck mount keypad DK-2881GB–Three output surface / gooseneck mount keypad with door bell output The keypad compatible with three operation modes: (1) Stand-Alone Mode –Keypad and Electric Lock (2) Multi-Station Mode – Keypad, Auxiliary Keypad and Electric Lock (3) Split-Decoded Mode –Keypad, Split Decoder and Electric Lock In these three-operation modes, split decode has the highest security protection for home and office. Further, the keypad can be upgraded with the Wi-Fi Module to gain more features, such as remote control, receive &amp; record checking and setting password via mobile app. Features: Three relay output for door lock and equipment controlBuilt-in real-time clock for inhibition modeOptional multi-station, split-decode and Wi-Fi socket for expansion26-bit, 34-bit or 37-bit Wiegand data outputDifferent levels of user modeInterlock for dual keypad installationDuress and alarm output for external deviceVisitor and temporary password programable with timeOutput relay change be toggle or time modeBuilt-in tamper switchVandal-resistant weatherproof with back-lit metal keytopApp compatible for remote control, receive alarm message and password settingSuitable installation on wall or mounting on gooseneck post

Yan Chuen Co Ltd

This is a silicon rubber keypad with epoxy keytop pieces. It has a shiny surface due to the metallic coating. Also, it is fire resistant and the safety of usage is assured.
    Commonly used as keypads of remote control  Wearing resistant  

Silicone Rubber Keypad With Epoxy Keytop

  Membrane keypads in small or large sizes for products like computer, calculator and remote control.  Shapes of the keypads are tailor-made according to individual needs.  Different colours are available for the keys.  Membrane keypads require less space and are more comfortable to be used.  Compatible with all products with keys.  

Keypads

This keypad is made of silicone rubber for high durability. The buttons are in multi-color with silkcreen printing and PU matt coating. It can be widely used for business machiens, calculators, databanks or remote controls. 	 Other designs are available 	 With RoHS compliance 	 Quality products at competitive prices  

Silicone Rubber Keypad

This access controller is a decoder for keypads with split-decoded operation. It decodes the data of EM cards, PINs or codes and functions faithfully from keypads. This professionally made access controller features three simple wire connections for data communication.    Designed for keypads with split-decoded operation.    Decode the data of EM cards, PINs or codes and functions faithfully from keypads.    Three wire connection: data I/O, (+), (-).    Easy to set up link-up code with the keypads and the decoder.    Three independently controlled output relays.    Built-in door chime.    Built-in alarm for tamper, door forced open and door opening in split-decoder mode.    Built-in current limited (750mA) power source for the keypads to prevent sabotage of short circuit.

Split Decoder for Access Control

The wireless keypad kit is supplied with one DK-2310 wireless keypad, one DA-2311 decoder receiver and two DA-12 remote control keyfobs in one package for easy marketing and customer selection convenience. The system provides remote control of door lock, auxiliary equipments and door chime; or even as controller of a garage door opener. It is a flexible and compact access control system for home and office applications. DK-2310 -- WIRELESS KEYPAD FEATURES• Compatible with DA-2311, DA-2800 &amp; AD-2322 Decoder Receivers• Four Control Channels for Outputs 1, 2, 3 &amp; Door Chime• CE-R&amp;TTE and FCC Approval• 30 User Codes of 4-8 Digits for Controlling Output 1, 2 &amp; 3• 10 Visitor Codes for Temporary Staff or Visitors• Super User Code for System Inhibit after Office Hours or Nobody at Home• Master Code for Programming Authorization• Over 1 Million Non-repeated Keypad IDs• Operation Frequency: 433 Mhz• Control Distance: 50 Meters in Open Space• Operation Voltage: 9V Alkaline Battery (Battery Not Included)• Operating Current: 10uA (Quiescent), 10mA (Transmitting)• Weatherproof, IP-55, Indoor or Outdoor Installation• Tact-switch Flat Keypad. ABS Plastic Housing• Operating Environment: -20Deg C to +70 Deg C; 5-95% Relative Humidity DA-2311 -- DECODER RECEIVERDA-2311 is a 4-channel decoder receiver designed to work with the wireless keypad (DK-2310 and keyfob (DA-12) to build up a wireless access control system.It decodes the commands of the four channels from the keypad and or keyfob to control its master relay output, the two auxiliary outputs and the built-in door chime.DA-2311 can also work independently with the two supplied wireless keyfobs and by connecting an optional egress button and door bell button to it to make a compact access control system for home or office applications. FEATURES• Dedicated Receiver for DK-2310 Wireless Keypad and DA-12 Keyfob• High Sensitivity 433Mhz Super-heterodyne Receiver• CE-R&amp;TTE and FCC Approval• Serves Maximum 40 Wireless Keypads and/or Keyfobs• Control Distance: 50 Meters (Keypad); 40 Meters (Keyfob) approx. in Open Space• Compatible with Fail-safe and Fail-secure Door Locks• Form C Relay with Contact Rating of 5A/24VDC for Output 1• Open Collector for Auxiliary Outputs 2 &amp; 3• Built-in Door Chime Operated Remotely Or by Wired External Button• Connection Terminals for External Egress Button and Bell Button• Operation Voltage: 12-24VDC, Auto Adjusting• Operating Current: 60mA (Quiescent); 90mA (Output Relay Active)• Operating Environment: -20 Deg C to +70 Deg C; 5-95% Relative Humidity• ABS Plastic Housing, Indoor Installation Only 

Wireless Keypad Kit

DK-2890 MK-II is a self-contained single output relay Keypad. It combines the digital keypad and proximity EM card reader in one unit. The keypad compatible with three operation modes: (1) Stand-Alone Mode – Keypad and Electric Lock (2) Multi-Station Mode – Keypad, Auxiliary Keypad and Electric Lock (3) Split-Decoded Mode – Keypad, Split Decoder and Electric Lock In these three-operation modes, split decode has the highest security protection for home and office. Features: Single relay output for door lockBuilt-in real-time clock for inhibition modeOptional multi-station, split-decode for expansionDifferent levels of user modeVisitor password programable with timeOutput relay change be toggle or time modeBuilt-in tamper switchBack-lit silicon keytopSuitable installation on wall

Access Control Keypad with Card Reader

DK-2822 MK-II is a self-contained dual output relay Keypad. It combines the digital keypad and proximity EM card reader in one unit. DK-2822A – Dual output surface mount keypadDK-2822B –Dual output surface mount keypad with door bell outputThe keypad compatible with three operation modes: Stand-Alone Mode – Keypad and Electric LockMulti-Station Mode – Keypad, Auxiliary Keypad and Electric LockSplit-Decoded Mode – Keypad, Split Decoder and Electric LockIn these three-operation modes, split decode has the highest security protection for home and office. Features: Dual relay output for door lock and equipment controlBuilt-in real-time clock for inhibition modeOptional multi-station, split-decode for expansion26-bit, 34-bit or 37-bit Wiegand data outputDifferent levels of user modeInterlock for dual keypad installationDuress and alarm output for external deviceVisitor password programable with timeOutput relay change be toggle or time modeBuilt-in tamper switchBack-lit silicon rubber keytopSuitable installation on wall

This keypad is made of silicone rubber and comes in a two toned design. It has conductive rubber pills and offers 40A ~ 70A hardness. The silicone rubber keypad is suitable for numeral input use and delivers accurate and responsive controls. Material: silicone rubber and 2 color rubber.With conductive rubber pills.Hardness: 40A ~ 70A.Suitable for numeral input use.Deliver accurate and responsive controls.RoHS compliance.

Silicone Rubber Numeral Input Keypad

This keypad is made of silicone rubber and durable to use. It comes with a silicone rubber case and a gasket for waterproof function. It is available as components of controls of various electronic devices. 
   More designs are for options   With RoHS compliance   Quality products at competitive prices  

DK-9380 is a dual relay output, vandal resistant weatherproof keypad. It is a simple function keypad with easy programming method. The keypad has two operation mode, which is Single-User Mode and Multi-User Mode. DK-9380A– Two output surface / gooseneck mount keypadDK-9380B–Twooutput surface / gooseneck mount keypad with door bell outputDK-9380C– Twooutput flush mount keypadDK-9380D–Twooutput flush mount keypad with door bell outputThe keypad compatible with two operation modes: (1) Single-User Mode –Simply require only one each user code for door open. One Code Mode. (2) Multi-User Mode –Up to 100 user code for door open. The code can have length of 4-8 digits for higher security. Features: Two relay output for door lock and equipment controlOptional single or multi-user modeDifferent levels of user code modeInterlock for dual keypad installationDuress output for external deviceVisitor code programable with timeOutput relay change be toggle or time modeBuilt-in tamper switchVandal-resistant weatherproof with back-lit metal keytopSuitable installation on wall or mounting on gooseneck post

Simple Access Control Keypad

DK-2851 MK-II is a self-contained dual output relay, vandal-resistant and weatherproof Keypad. It combines the digital keypad and proximity EM card reader in one unit. DK-2851C – Dual output surface mount keypadDK-2851D –Dual output surface mount keypad with door bell outputThe keypad compatible with three operation modes: (1) Stand-Alone Mode – Keypad and Electric Lock (2) Multi-Station Mode – Keypad, Auxiliary Keypad and Electric Lock (3) Split-Decoded Mode – Keypad, Split Decoder and Electric Lock In these three-operation modes, split decode has the highest security protection for home and office. Features: Dual relay output for door lock and equipment controlBuilt-in real-time clock for inhibition modeOptional multi-station, split-decode for expansionDifferent levels of user modeInterlock for dual keypad installationDuress and alarm output for external deviceVisitor password programable with timeOutput relay change be toggle or time modeBuilt-in tamper switchVandal-resistant weatherproof with back-lit metal keytopSuitable installation on wall or mounting on gooseneck post

Access Control Keypad

  This membrane keyboard features overlay, spacer, metal domes, lower circuit, LEDs  Overlay: pc or pet  Circuit: pet, carbon or silver paste  Adhesive: 3m  Simple for using in gadgets like handheld calculators, domestic remote control keypads,  microwave ovens, and other similar devices where the amount of typing is minimal  Suitable for use in electronic gadgets  Design and keys can be customized to suit your needs  

Membrane Keyboard

CD-272 is a dual function device that combines Cellular Dialer and Gate Opener in one unit. It is compatible with all Alarm Control Panel and Access Control Keypad for feature enhancement. It can make alarm report to 5 preset phone numbers and remote control the access control keypad via mobile App "Gate Plus". Dialer &amp; Gate Opener Common Features Master Code for System Feature Programming AuthorizationMaster Code, Owner's Contact Phone Number, System Operation Mode and SIM Card Testing Interval Settings are Authoried with (MSA) Switch (Master-Setting-Authorization)Programmable 1-6 Weeks SIM Card Active TestingDialer Performs Signal Strength Testing with SMS Testing CommandFunction and Feature Programming with SMS from Mobile PhoneMaximum 30 Characters Including Space SMS TextExecute Dialing Immediately for Alarm Notification after Opener Comment Finish While System Has Been Busy in Dialer + Opener Mode. Dialer Section Five Telephone Numbers (1 Owner + 4 Auxiliary) for Receiving Alarm SMS and Ring Call. The Owner Number Also Receives System Status SMS.Telephone Number Can be 30 Digits MaximumThree Alarm Notification Formats: 1) SMS + Ring, 2) SMS Only, or 3) Ring OnlyTwo Isolated Input Terminals for Alarm Event Triggers. e.g. Burglar, Fire or OthersInput Terminals Independently Selectable for Ring Only to Prevent SIM Card ChargesInput Terminals Response Time Programmable between 1-10 Seconds to Prevent Arm-Disarm Ring Back Signal or Interference from External Alarm Control PanelProgrammable Inactive Timer after Dialing Prevents Undesirable Repeat TriggeringOne Alarm Output Relay with NC and NO Output Contacts to Drive External Device Gate Opener Section Operate with or without Authorization Phone Number1000 Authorization Phone Numbers Maximum to Operate The Gate OpenerText to Open for Pedestrian GateText to Keep Main Gate And Pedestrian Gate Temporarily Open with Super User CodeText to Temporarily Stop Operation of The Opener Section During The Time of After Office Hour or Nobody at HomeTwo Relay Outputs for Main Gate (O/P 1) And Pedestrian Gate (O/P 2) ActuationRelay Outputs Are Programmable for 2 – 60 Seconds (default 2 sec)Two Auxiliary Egress Button for Main Gate and Pedestrian Gate Actuation for Emergency Case

Cellular Dialer + Gate Opener

HA-266 is a compact auto-dialer alarm control panel with 6 hardware protection zones and 2 software zones for panic and duress alarms, which is designed for home and office protections. The system gives local alarm warnings as like the traditional alarm systems as well as sending voice message to 4 telephones of pre-set numbers when alarm occurs. The auto dialer is compatible with all the public telephone systems. The control panel comes with a built-in full feature control console for ready installation.Auxiliary control consoles can be purchased separately. Both types of consoles are back lighting and have the same function except the built-in microphone for message recording is not available on the auxiliary control console.Features for Alarm 6 Zones, Programmable for Instant, Delay (2 delay time available), 24 Hour Instant or 24 Hour Silent Alarm ReportingProgrammable Master Code and 8 User CodesAll User Codes with Duress FunctionProtection Zones are Programmable for Single or Multiple TriggeringProgrammable Time for Exit, Entry (2 timings) and Alarm DurationArm-Disarm Control from Keypad or Remotely from Any DTMF Telephone mobile PhoneEach Protection Zone is Programmable for Response TimeExit and Entry Warning Beeps On-Off OptionsArm-Disarm Ring Back Indication On-Off OptionsInstant Arming Codes for Home and Away OperationsBuilt-in Dynamic Battery Charger and Tester with Auto or Manual Testing OptionsTwo On Board Software Zone for Panic and Duress AlarmsMaximum 2 Control Keypads Can Be ConnectedHome or Away OperationForced to Arm or Arm Prohibited OptionsHandover Option for The Instant ZonesFacilities for Driving Siren/Bell, Satellite Siren and Strobe LightPower Low Watchdog Resets SystemNon-Volatile MemoryCan be Arm-Disarmed by Conventional Key SwitchFull Feature Default Values in System for Ready Use12V / 1.2Ah Back-up Battery (Not Included)12-16VDC OperationWeight: 1.2 Kg (The Control Panel); 220 g (The Keypad)Dimensions: 116(H) X 180(W) X 67(D) mm (The Control Panel); 117(H) X 117(W) X 27(D) mm (The Keypad)Features for Auto-dialer Four 32 Digit Telephone Numbers for Auto-DialerTwo 32 Digit Telephone Numbers for CommunicatorCommunicator Data in DTMF Format with Check-sumTone or Pulse DialingProgrammable Pause Time between Any DigitsVoice Message and Numeric Message are Possible20 Seconds Non-Volatile User Programmable Voice MessageControllable Listen-in DurationBack-up or Non-back-up Dialing for Alarm ReportingAutomatic Telephone Line Fault DetectionProgrammable Dialing Attempts, 8 MaximumProgrammable Message Repeats, 8 MaximumTelephone Numbers can be Tested Individually

Alarm Control Panel 

  This electric door lock comes in the standard design for added user-friendliness during installation. The built-in MOV absorbs the electric spikes and the back EMF from the solenoid in the actions of striking and releasing to ensure the smooth operation. This electric door lock is often associated with electronic devices such as digital access control keypad system.        Fail-safe feature.       Operation voltage: 12V DC.       Rated current: 200mAh.       Zinc alloy face plate.       CE approved.   

Electric Door Lock

HA-263D &amp; HA-263K is a high performance local alarm control panel with 8 hardware protection zones in two partitions. The main advantage of it is all the main features are accomplished by direct jumper settings on the main circuit board. It is absolutely simple to set up and no learning is required. It is an ideal system for both “Do-It-Yourself” and professional users.The system is designed with two partitions in one enclosure. The two partitions are independently controlled for arm-disarm just like two alarm control panels, which gives the maximum flexibility for users convenience and protection arrangement. The lobby protection zone in the Common Partition is armed while both partition 1 and 2 are armed to give maximum protection; and it is disarmed while one of the partition is disarmed. This allows either partition to arm, while leaving the lobby for access into the other partition.The HA-263D comes with a Digital Keypad for arm-disarm control with user codes, which also offers additional features via programming through the keypad. The system can also work with key-switch and digital keypad in mixed operation.The HA-263K comes with one Key Switch Control Station for combined arm-disarm control of the whole system. Independent control of the two partitions requires two key switch control stations. The system can also work with key-switch and Digital Keypad in mixed operation.Features: Arm-disarm Controlled by Digital Keypad 8 Zones in Two Partitions Independently Programmable User Codes for Partition 1, 2, &amp; The Whole System User Codes Can Be 4-6 Digits Programmable Time for Entry Delay and Alarm Duration Each Protection Zone is Independently Programmable for Response Time Exit and Entry Warning Beeps On-Off Options Arm-Disarm Ring Back Indication On-Off Options Instant Arming Codes for Home and Away Operations Built-in Dynamic Battery Charger and Tester with Auto or Manual Testing On Board Software Zone for Panic Alarms Maximum 4 Control Keypads or Key Switches Can Be Connected Home or Away Operation Forced to Arm with The Faulty Zone(s) Bypassed Handover Option for The Instant Zones Facilities for Driving Siren/Bell, Satellite Siren and Strobe Light Power Low Watchdog Resets System Non-Volatile Memory 12V / 6.5Ah Back-up Battery (Not Included) 16.5VAC Operation Weight: 2.5 Kg (The Control Panel &amp; The Keypad) Dimensions: 270(H) X 265(W) X 78(D) mm (The Control Panel); 117(H) X 117(W) X 27(D) mm (The Keypad) 

Alarm Control Panel

Epomaker Inc

 EK21 VIA Gasket Numpad Elevate your typing experience with the EK21 VIA Gasket Number Pad, a versatile and highly functional numeric keypad perfect for professionals and gamers alike. Featuring an advanced layout with 20 keys and a premium aluminum alloy knob, this hot-swappable numpad excels in both performance and aesthetics. With its robust construction, customizable RGB lighting, and exceptional battery life, the EK21 is designed to enhance productivity while offering seamless compatibility across various operating systems, including Windows, Mac, and Android. Experience the future of typing with a product that combines cutting-edge technology with user-centric design  A Tailored Experience for Your Workflow In response to community feedback, the EK21 numpad offers robust programmability through VIA software, empowering you to fully customize and personalize each key according to your unique workflow and preferences. This innovative feature allows you to create intricate macros, effortlessly remap keys, and fine-tune your typing experience with ease. With the intuitive interface of VIA, you can take control of your productivity like never before. Whether you need to streamline repetitive tasks or optimize your gaming setup, the EK21 numpad provides versatility and adaptability to any situation  Triple Modes&amp;1000mAh Large Capacity Battery The EK21 offers exceptional versatility with its triple connectivity options. Choose from wired, Bluetooth, or 2.4GHz wireless modes to suit your preferences and enhance your productivity. This numpad is not just about connectivity; it also features a robust 1000mAh battery capacity, providing you with extended usage time without the inconvenience of frequent recharging. Enjoy consistent performance and stay focused on your tasks throughout the day, knowing that the EK21 is designed to keep up with your demands. Whether you're working at your desk or on the go, this device ensures seamless operation tailored to your needs  A Comfort-First Design The EK21 keyboard has been meticulously crafted with your comfort as a top priority. Featuring a Poron bottom layer, this innovative design incorporates sandwich foam along with an IXPE switch pad to deliver an exceptionally cushioned typing experience. This thoughtful combination not only alleviates strain on your fingers during prolonged use but also significantly reduces noise, allowing for a quieter workspace. Say farewell to fatigue and distractions; the EK21 enables you to type with unparalleled ease and precision  

EK21 VIA Gasket Number Pad with 1000mAh Battery, BT 5.0/2.4GHz/Wired Hot-Swap Numpad with Aluminum Alloy knob, Programmable for Win/Mac/Gaming

DA-12 is a 4-channel remote control keyfob working on 433Mhz. It is compatible with the decoder receivers DA-2311, DA-2800 and AD-2322 to operate their 4 outputs remotely. FEATURES Four Control Channels A, B, C &amp; D for Output 1, 2, 3 &amp; Door ChimeOver 1 Million Non-repeated IDsCE-R&amp;TTE and FCC ApprovalOperation Frequency: 433 MhzControl Distance: 40 Meters in Open SpaceOperation Voltage: 12V Alkaline Battery, Type 27A (Battery Not Included)Operating Current: 0mA (Quiescent); 10mA (Transmitting)ABS Plastic HousingOperating Environment: -20Deg C to +70 Deg C; 5-95% Relative HumidityDimensions: 55(H) X 38(W) X 12(D) mmWeight: 32gs 

Remote Control Keyfob

DK-9866 is a three relay output keypad. It is a simple function keypad with easy programming method. The keypad has two operation mode, which is Single-User Mode and Multi-User Mode. The keypad compatible with two operation modes: Single-User Mode –Simply require only one each user code for door open. One Code Mode.Multi-User Mode –Up to 100 user code for door open. The code can have length of 4-8 digits for higher security.Features: Three relay output for door lock and equipment controlOptional single or multi-user modeDifferent levels of user code modeInterlock for dual keypad installationDuress output for external deviceVisitor code programable with timeOutput relay change be toggle or time modeBuilt-in tamper switchSuitable installation on wall

DK-2882 MK-II+ is a self-contained three output relay, vandal-resistant and weatherproof (Wi-Fi) Keypad. It combines the digital keypad and proximity EM card reader in one unit. DK-2882GA– Three output surface / gooseneck mount keypad DK-2882GB–Three output surface / gooseneck mount keypad with door bell output The keypad compatible with three operation modes: (1) Stand-Alone Mode –Keypad and Electric Lock (2) Multi-Station Mode – Keypad, Auxiliary Keypad and Electric Lock (3) Split-Decoded Mode –Keypad, Split Decoder and Electric Lock In these three-operation modes, split decode has the highest security protection for home and office. Further, the keypad can be upgraded with the Wi-Fi Module to gain more features, such as remote control, receive &amp; record checking and setting password via mobile app.  Features: Three relay output for door lock and equipment controlBuilt-in real-time clock for inhibition modeOptional multi-station, split-decode and Wi-Fi socket for expansion26-bit, 34-bit or 37-bit Wiegand data outputDifferent levels of user modeInterlock for dual keypad installationDuress and alarm output for external deviceVisitor and temporary password programable with timeOutput relay change be toggle or time modeBuilt-in tamper switchVandal-resistant weatherproof with back-lit metal keytopApp compatible for remote control, receive alarm message and password settingSuitable installation on wall or mounting on gooseneck post

WiFi Access Control Keypad with Card Reader

HA-278 is an 8+16 zone alarm control panel that comes with auto-dialer and communicator. The dialer sends voice message / SMS to four preset telephone number and communicator has two channels for sending alarm reports to two stand alarm monitor stations of Contact ID format.The protection zones and the alarm output facilities are compatible with most of the sensors and output devices on the market. HA-278 is expandable to 24 zones; it is ideal security system for business and residential protections. HA-278 is not app controlled. End-user can remote arm, disarm and checking alarm status on their mobile phone. Here are the QR code for the app control. Welcome to download the app to learn more. Features for HA-278 Alarm 8+16 Zones, Programmable for Instant, Delay (2 delay time available), 24 Hour Instant or 24 Hour Silent Alarm ReportingCompatible to HX-2716 16-Zone ExpanderContact ID®Format Communicator, For Communication to MS-270 Monitor StationLCD Display Easy Programming KeypadProgrammable Master Code and 8 User CodesAll User Codes with Duress FunctionProtection Zones are Programmable for Single or Multiple TriggeringProgrammable Time for Exit, Entry (2 timings) and Alarm DurationArm-Disarm Control from Keypad or Remotely from Any DTMF Telephone mobile PhoneEach Protection Zone is Programmable for Response TimeExit and Entry Warning Beeps On-Off OptionsArm-Disarm Ring Back Indication On-Off OptionsInstant Arming Codes for Home and Away OperationsBuilt-in Dynamic Battery Charger and Tester with Auto or Manual Testing OptionsTwo On Board Software Zone for Panic and Duress AlarmsMaximum 4 Control Keypads Can Be ConnectedHome or Away OperationForced to Arm or Arm Prohibited OptionsHandover Option for The Instant ZonesFacilities for Driving Siren/Bell, Satellite Siren and Strobe LightPower Low Watchdog Resets SystemNon-Volatile MemoryCan be Arm-Disarmed by Conventional Key SwitchFull Feature Default Values in System for Ready Use12V / 6.5Ah Back-up Battery (Not Included)16.5VAC / 24VDC OperationWeight: 2.2 Kg (The Control Panel); 250 g (The Keypad)Dimensions: 268(H) X 263(W) X 78(D) mm (The Control Panel); 125(H) X 188(W) X 23(D) mm (The Keypad)Features for Auto-dialer Four 32 Digit Telephone Numbers for Auto-DialerTwo 32 Digit Telephone Numbers for CommunicatorCommunicator Data in DTMF Format with Check-sumTone or Pulse DialingProgrammable Pause Time between Any DigitsVoice Message and Numeric Message are Possible20 Seconds Non-Volatile User Programmable Voice MessageControllable Listen-in DurationBack-up or Non-back-up Dialing for Alarm ReportingAutomatic Telephone Line Fault DetectionProgrammable Dialing Attempts, 8 MaximumProgrammable SMS Message Repeats, 8 MaximumTelephone Numbers can be Tested Individually

My Sourcing