Electronics

elec

Find Electronics from the best B2B online marketplace. Find a reliable Electronics supplier, vendor, manufacturer or distributor to get free quote on HKTDC Sourcing.

Electronics Suppliers and Manufacturers

Vicimeter Technology (Hong Kong) Co., Ltd.

Features:
1. Handheld metal detector, easy to carry and operate.
2. High sensitivity to easily detect pin-sized metal articles.
3. large detecting area, can detect ferrous and non-ferrous and stainless steel weapons.
4. Red/green LED and sound + vibration alarm.
5. Adjustable sensitivity.
6. Operation temperature: -5C to +55C.
7. Quiescent current: &lt;10mA.
8.. Operation current: &lt;50mA.
9. Low battery indication.
10. Detecting area: width: 80mm, length: 190mm.
11. Standard accessory: manual holster, charger(optional).
12. Package: gift box.
13. Standard package per carton:25pcs.
Carton size:49*26*44CM.
G.W.: 13KG.
&nbsp;

Handheld High Performance Metal Detector

Peace Target Ltd

High Precisions Portable Metal Detector includes the following features : For different types of objects, intelligently adjust the detection distanceFast detection induction, the built-in induction coil (if there is a metal substance) is detected within the detection range, it will immediately alarmStrong and sturdyPush-up switch operation, start-up and test, easy to useWhen the detector detects metal, the buzzer will sound an alarmWhen metal is detected, the indicator light will turns to redThe probe rotates 180°, suitable for more scene measurementOperated by 6F22 9V battery (included)Suitable hospital, airport, concert and stadium, etc.Material : ABS housingSize closed : Extended length of 39.4 cm x Width of 14 cmFolded length of 23.5 cm x Width of 14 cmWeight of 230 grams

High Precisions Portable Metal Detector

High Sensitivity Handheld Metal Detector includes the following features : Alarm indication: steady yellow LED - target detected; blinking green LED - power on; flashing red LED - low voltage indicationTwo alternative alarm options: audio mode (buzzer and red LED) and vibration mode (vibration and red LED)When metal is detected, the indicator light will turns to yellow steadyOperated by 9V battery (included)Battery life: 30 - 40 hours (lithium battery); 28 hours (alkaline battery)Frequency: 25HzReset time: 0.5 seconds, automaticHigh sensitivityLightweight designThe comfortable handle make it easier to use over a long period of timePerfect for security control and detection of prohibited goods, electronic products, metal etc in train stations, border guards, schools, courts, venues and factoriesMaterial : ABS housingSize closed : Length of 37.5 cm x Width of 7.7 cm x Thickness of 2.6 cmWeight of 225 grams

High Sensitivity Handheld Metal Detector

Battery Organizer with Removable Battery Tester (For 72 Batteries) includes the following features : 	 Holds more than 72 batteries - (10 x AAA, 26 x AA, 9 x 9v, 10 x C, 8 x D, 6 x CR and 3 x LR batteries) 	 Batteries not included in this item 	 Easy-to-read slide out battery tester has 3 lights to states power levels 	 Wall mounted design - Designed to fit in drawers or cabinet 	 Can test battery strength with removable battery tester 	 Compact design, lay flat in a drawer or mount on the wall 	 Desk, workshop, tool sets wherever you are, it offers convenience 	 Removable battery tester is powered by the tested battery  Material : 	 ABS plastic body  Size closed : 	 Length of 30.5 cm x Width of 16.1 cm x Height of 3.55 cm  

Battery Organizers

Laser Rangefinder (Distance &amp; Angle Measuring) includes the following features: 	 Height measuring 	 Distance measuring 	 Angle measuring 	 Scan mode 	 Ergonomic design 	 Rainproof construction 	 Low battery indicator 	 Laser indicator 	 Unit change (M/Y) 	 Automatically shut off 	 6 times magnification 	 Objective lens diameter of 25 mm 	 Fully multi-coated (FMC) on lens 	 Measuring Accuracy: =1/-1 M/Y 	 Measuring Time: 0.5-1sec 	 Exit pupil diameter of 3.9 mm 	 Requires CR2 (DC 3V) battery (not included)  Material: 	 ABS plastic housing with rubberized inlay  Size Closed: 	 Length of 10.2 cm x width of 7.1 cm x height of 4.1 cm 	 Weight of 180 grams  Color: 	 Available in various colors  

Laser Rangefinder w/ Angle Measuring

True RMS function.
NCV function.
Torch and backlight function.

Digital Multimeter

 	 Outer sensor 	 High/Low temperature alarm setting 	 Waterproof 	 1 x AAA battery  

Freezer Thermometer with Alarm

Battery Organizer with Removable Battery Tester (For 96 Batteries) includes the following features : 	 Holds more than 98 batteries - (48 x AA, 24 x AAA, 8 x D Cell, 10 x C Cell, 8 x 9V battery and several button cell batteries) 	 Batteries not included in this item 	 Easy-to-read slide out battery tester (Removable) and no batteries required to operate 	 Wall mounted design - Designed to fit in drawers or cabinet 	 The organizer also can be mounted on the wall of workshop, garage, closet or place it in a drawer 	 Compact design, lay flat in a drawer or mount on the wall 	 Desk, workshop, tool sets wherever you are, it offers convenience  Material : 	 ABS plastic body  Size closed : 	 Length of 34.8 cm x Width of 17.4 cm x Height of 4.45 cm  

Battery Tester Caddy

MGM Industries & Company

Application: Distinguish K value of gold, PT value of platinum, density value, purity percentage can be measured. Pawning house, bank, jewelry shop, precious-metals recovery, jewelry factory, Gemstone Testing Center, precious metals researching, etc. Note: Unable to measure sample which is hollow or with inserted gems.  Features: * Multi-mode, gold mode, platinum mode, other precious metals mode can be switched. * Top and bottom limitation of K value, purity and density of gold. And prompt alarm. * Automatic zero tracking, buzzer warning, and overload warning. * No damage testing, cleaning and environmental protection. * Could be used as precision balance. * Function of solution compensation: necessary if liquid other than water is used as a medium for measuring. * RS-232C is included.   

Precious Metal Tester

 	 Auto power off. 	 Full function protection. 	 Anti-high voltage circuit design.  

 	 AC + DC measuring.&nbsp; 	 True RMS. 	 Computer interface.  

Bench Type Multimeters

BST Caltek Industrial Limited

PD20 ExAcoustic Imaging Camera for Partial Discharge on Chemical Industry  Partial Discharge in a chemical industrial environment can cause loss of assets and life  Partial Discharge (PD) is a failure of part of the insulation system to withstand the electrical field. It can result from poor design, workmanship, defective materials, contamination, or ageing. This failure results in a high frequency, unipolar Discharge and accompanying current that flows through or on the surface of the insulation from the conductor to the ground. This current pulse is low energy due to its short (microsecond) duration, but it can negatively affect the insulation and eventually cause catastrophic failure.  Generally, PD happens on equipment including switchgear, transformers, stator windings, power cables and gas/pipelines. For PD to occur, a gas is present between the two conductors, whether air, sulphur hexafluoride (SF6) or hydrogen. In addition, a high voltage between the two conductors must create electric stress.  The discharge spark erodes the insulation from within through its heat and ionisation. If occurring on the surface, the Discharge also causes the breakdown of air molecules into oxygen (ozone) and nitrogen (nitric oxide). The nitric oxide forms nitric acid, which erodes the insulation from the outside.  When an internal PD occurs within the insulation, there is nothing to give this occurrence away, and the absence of any sound, odour or visual clue to an issue before failure is a real challenge. However, the pressure accumulation can cause a significant, disruptive and dangerous explosion.  Partial Discharge in a chemical industrial environment can cause loss of assets and life. Though it usually starts very small, once it begins, the deterioration of the insulation system is progressive. When voltage stress reaches a critical level, Partial Discharge will "bloom" and create a Corona. The ionised gas of a Corona is chemically active. In the air, this generates corrosive gases and causes extreme damage to the magnetic device and related circuit. Eventually, Partial Discharge will cause a system failure. Due to our policy of continual product development, we reserve the right to amend the specifications of all mentioned products without notice. 

Acoustic Imager for Chemical Industry

Cansum Electronics Limited

METAL DETECTOR FOR SEARCHING UNDERGROUND METALS

Metal Detector 

Zhejiang Aoqi Technology Co., Ltd.

Displayed is a metal detector that comes in the shape of a magnifier for easy use. With a high sensitivity, this metal detector is responsive and accurate. This measuring device also has low battery alarm so that you can always be prepared.
 
  Low battery alarm. 
  High sensitivity. 
  Easy to use. 
 

Metal Detector

Metek Ind'l Co Ltd

 	 Metal, voltage &amp; stud detectors combined in one unit 	 M/V selector switch provides independent metal or voltage detection with great accuracy in detecting hidden metal or wiring 	 4-level LED indications to detect stud precisely 	 Visual (LED) &amp; Audible (Buzzer) indications 	 Powered by one 9V PP3 battery (not included)  

3-in-1 Metal / Voltage / Stud Detector

  Metal, voltage & damp detectors combined in one unit  Instant visual (LED) & audible (Buzzer) warning  Detects, traces and assesses the extent and source of moisture or condensation  M/V selector switch provides independent metal or voltage detection with great accuracy in detecting hidden metal or wiring  Dual-colour LED indicator for metal and voltage detections  Powered by one 9V PP3 battery (not included)  

3-In-1 Metal / Voltage / Damp Detector

 	 Metal, voltage and stud detectors are combined into one unit 	 Selectable metal, voltage and stud detection or auto mode can carry 3 functions simultaneously 	 Result is shown by LCD and buzzer 	 Microprocessor control circuits provide precise and accurate detection 	 It is powered by one 9v-pp3 battery but it is not included 	 It is all in red with white instructive display 	 It is suitable for professions of physics and electricity 	 It can be used in manufactures and factories  

3-in-1 Metal/ Voltage/ Stud Digital Detector

  Metal, voltage & stud detectors combined in one unit  Selectable metal, voltage & stud detections or auto mode to carry 3 functions simultaneously  Microprocessor control circuits provide precise & accurate detections  Result shown by LCD & Buzzer  Auto-power-off  Multi-scan-level to pinpoint the exact position  Powered by one 9V PP3 battery (not included)  

Digital 3-In-1 Metal / Voltage / Stud Detector

Shanghai Tianxun Electronic Equipment Co Ltd

Metal Detector No2#

Metal Detector No3#

Metal Detector No1#

Shenzhen Yaoertai Technology Development Co., Ltd.

 The smoke detector is a device used to detect smoke, typically as an indicator of fire. The detector has the function of networking type photoelectric smoke detecting with microprocessor control. The detector is dustproof, mothproof, resistant to the white light interference. 
 
  Automatic reset/interrupt optional. 
  Reset optional. 
  Infrared photo sensor. 
  Networking output N.C/N.O. optional. 
  LED instructions alarm. 
  Metal shields, anti-electro magnetic interference. 
  SMT process manufacturing, high stability. 
  Working voltage: DC9-16V. 
  Static current: &le;mA. 
  Working temperature: -10&deg;C&plusmn;50&deg;C. 
  Operating humidity: &le;95%RH. 
  Alarm mode: networking output/ LED instructions alarm. 
  Monitoring area: 20m&sup2;. 
  Sensitivity level: 1 grade. 
  Alarm output: electric relay output (NC/NO). 
  Product size: &oslash;104 x 49mm.

 &nbsp; 
 

Smoke Detector Series

Qingdao Haohai Network Tech Co., Ltd.

 This is&nbsp;a forest fire detector coming in a metal housing for added durability. It is equipped with thermal imaging heat source recognition to offer long-distance, non-contact temperature detection. This refined detector is highly durable and ensures reliable performance.



 
  Double lenses. 
  Long-distance, non-contact temperature detection. 
  Penetrating fog. 
  Multiple navigation modes. 
  Designed for outdoor use. 
  Support 365 x 24 continuous navigation scan. 
  Resistance: shock, abrasion, dust, water, extreme coldness. 
  Eight patented technology. 
  Auto. alarm. 
  Digital alarm, digital alarm, GIS positioning, fire tracing. 
  Modes: fire recognition, thermal imaging heat source recognition. 
  Metal housing. 
  IP rating: IP66. 
  Self-developed image enhancement technology based on HDR. 
 
 

Forest Fire Detector

Zhongshan Dongbo Financial Devices Co Ltd

Identity and detect any counterfeit currency with this money detector. The equipment features magnetic, metal thread, IR and digital watermark detection functions to verify your banknote quickly and efficiently. Suitable for most currencies in the world, it is excellent for any small business.
   Feature magnetic, metal thread, IR and digital watermark detection functions.   User-friendly and convenient operation.   Excellent currency detector for any small business.   Verify your banknote quickly and efficiently.   Suitable for a wide variety of currencies in the world.   Identity and detect any counterfeit currency with this money detector.  Technical specification:
   Weight: net: 0.75kg; gross: 1kg.   Ambient temperature: 0℃~40℃.   Relative humidity: 30~80%.   Other function: self-diagnostic system.   Memory backup.   Ejection direction: back or front.   Print function: print serial number and report(optional).   Connectivity interface: RJ11(connect to pc or printer).   Insertion direction:   Type A: any direction.   Type B: one direction.   Currency setting: manual or automatic.   Processing speed: &lt;0.5 sec/piece.   Suitable note size: 45 x 90~83 x 185mm.   Display type: LED or graphic LCD.   Discriminating system:   Magnetic detection.   Metal thread detection.   IR detection.   Digital watermarking detection.   UV detection(optional).   Serial number detection (optional).   Power supply:   Adapter: input: AC100V~240V, 50/60hz.   Output: DC12V, 1A.   Battery(optional): lithium ion12V,700mah (about detecting 2500 piece notes, back ejection).   Power consumption: standby: &lt;1W; operation: &lt;10W.   Software update: via to PC by RS232 serial port.  

My Sourcing