Electronics

elec

Find Electronics from the best B2B online marketplace. Find a reliable Electronics supplier, vendor, manufacturer or distributor to get free quote on HKTDC Sourcing.

Electronics Suppliers and Manufacturers

Peace Target Ltd

2-in-1 Car Jump Starter &amp; Air Inflator includes the following features : Capacity of 37Wh (10,000 mAh/3.7V)LCD displayCharging specifications: DC5V/2A, 9V/2A (type-c)Charging time: 3-6 hoursUSB output: 5V/2A MaxStarter current: 600APeak current: 800AAuto 12V emergency starterPowerful USB power bankBuilt-in LED flashlight2 x Intelligent clampsSupports 12V system vehiclesGreat for engine with 5.0L gasoline vehicles &amp; 3.5L diesel vehiclesIntelligent relay wire clamp protection function: Working voltage detection, provides 4 types of protection - reverse charging, short circuit, reverse connection and temperature protectionAir pump: T-type 19-cylinder movementMaximum air pressure: 120psi±5psiRS390-17500 rpmMicro cable and type C cable includedAccessories: 1 x air pump power supply, 1 x charging cable, 1 x 4-piece adapter, 1 x starter battery clamp, 1 x manualMaterial : ABS plastic bodySize closed : Length of 8.96 cm x Width of 4.36 cm x Height of 22.1 cmWeight of 0.77 kgs

2-in-1 Car Jump Starter & Air Inflator

MGM Industries & Company

(WIRELESS CHARGING, ELECTROMAGNETIC CHARGING): Support wireless charging function for cell phones directly on the wireless car charger stand. Note that this wireless charger-only supports cell phones with magnetic wireless charging function. If there is no wireless charging function, please use the data cable for charging.(SMART FAST CHARGING MAKES DRIVING EASIER AND SAFER)：When your phone is put on it, it will be automatically clamped, and after finishing charging, the wireless car charger will automatically turn off to protect your phone battery.(SMART-TOUCH BUTTONS ON BOTH SIDES)：Touches it with your hand to turn it on or off. Thoughtful indicator light to indicate the charging status, the device is powered on, the standby status shows red light, the phone charging status, the indicator light shows blue light.(ADJUSTABLE-BOTTOM BRACKET)：Bottom bracket and left and right clip arm have non-slip silicone pads, left and right clip arm non-slip silicone pads leave the phone button position, will not press the phone button. Silicone pattern design is also very good, regardless of the size of the phone is able to card very tight.(IDEAL VIEWING ANGLE)：360° rotating and turning ball joint can be adjusted to any viewing angle to meet your all-round visual needs.

Car air outlet navigation mobile phone 15W fast charging bracket Fully automatic induction opening and closing car wireless charging bracket

Shenzhen Oceantech Electronics Co Ltd

Clamping 15W Wireless Car Charger ● Input: 9V/3A ● Output: 15W(MAX) ● Cable length: 1m/2A ● Product interfaces: Type-C ● Product weight: 75.3g ● Product size: 51*59*10.2mm ● 15W for Cellphone      

Clamping 15W Wireless Car Charger

Meet (China) Ltd

Cable and Pipe Trace - Single pole transmitting signal through any matallic object, Easy; Safe and Quick to operate!MS-CPTK1AComplete Tracer Kit Set: Transmitter &amp; Receiver with Accesories : Croc Clip, 13A Socket Adaptor, E27 ES Light Fitting Test Adaptor, all packed in Durable &amp; Portable Carrying bag.Advance Features:-Transmitter - MS-78CPT3A-Single pole transmitt the signal-Operated with 9V battery-8 level transmit signal selection-Works on energized or de energized circuit up to 600V AC/DC-Transmit signal greater than 1Km-Transmit signal through any metallic conductor-Croc clip can be clamped on the sheath of the wire or cable transmit signalReceiver - MS-78CPR3-Operated with 9V battery-Auto sensitivity adjust or manually 'REL' adjust-Non-contact AC voltage detection &gt; 100V AC-With white LED torch / flash light-Audible with 7 level signal strength indication-270° rotation with six angle selectable sensing armCroc Clip - MS-LAC-Quick check with wire / cable / metal pipe13A Socket Adaptor - MS-CP (9A)-Quick check with 13A socketE27 ES Light Fitting Test Adaptor - MS-TLAES-Quick check with light fittingTrace:-Cable / Multi-core cable-Wire / Telephone cable-Coaxial cable-Shielded network cable-Armoured cable-Buried wire / cable-Underground water pipe-underground cable-Wires inside PVC / metal conduit / duct / pipe-Metallic air / oil / water pipe-Heating pipe-Buried gas pipe-Ground / Earthing connectionNote: Detectable 2 feet away depending on distance!  

Cable and Pipe Trace

New Greathouse Electronics Industry Limited

The product is hard wired and powered by your vehicle’s battery. It is convenient, effective and environmentally friendly. You will have no worry of rodent problem from now on. This item will drive marten,rodents away from your car and garage. It emits ultrasonic waves that make the marten feel uncomfortable and run away.This device is supplied with mounting and wiring hardware to connect to the car’s battery. There are two cables. The red cable should be clamped to the positive electrode and the black cable be clamped to the cathode. The unit automatically switch off while the car is running and then automatically switch on emit ultrasonic wave once the car off.Due to containing vibration controller that monitor this. This item has low power consumption. The sounds are hardly perceptible to the human ear and keep the marten rodents away from the vehicle and rooms. It protects cables, wires and other rubber parts from rodent damage. Technical data: Power supply:Car storage battery Working current:28mAh,in standby 20μAh Frequency:12-45KHZ Display:LED indication Advantage:No chemical,easy to use and install  

Car-mounted pest repellent

Dongguan Langming Intelligent Technology Co., Ltd

1) Compatible with PC Windows, Xbox 360/ Xbox One/ Xbox Series X S / PS5/PS4/ PS3/ PC/ Xinput/ Switch/ Android systems 2) 180°-1080° switch freely 3) High-Quality Shifter: 6+1 shifter, high/low Shifting switch 4) 3-In-1 Pedal with Hall Magnetic Induction 5) Double motor vibration for realistic feedback 6) Built-in Hall left and right paddle for precise control 7)LED lights on the steering wheel for an immersive experience Supported platforms: PC/PS5/PS4/PS3/ Xbox-Series X S /Xbox-One/Switch /Xbox 360 /Android TV Box Connection type: wired Interface: USB 2.0 Sensor type: Resistive Rotation angle: 180 to 1080 degrees 2 Vibration motor feedback Steering wheel diameter:25cm D-Pad: 4-way Adjustable sensitivity The type of fastening to the tabletop: 2 clamps The quantity of buttons: 28 Cable length: 1.8M Power supply: Wired USB Connection 

1080° Racing Wheel  Racing Simulator Bundle: PC Gaming Steering Wheel Pedal Set with  Springs & Gear Shift

1) Support P S 5 P S 4 /P S 3 /PC / XBOX Series X S / XBOX 360 / XBOX ONE / NS SWITCH / ANDROID 2) 900 degree Rotation 3) Auto-Gear + Pedal 4) With paddle shifte  Supported platforms: PC/P S 5/P S 4/P S 3/ Xbox-Series X S /Xbox-One/P 3/Switch /Xbox 360 /Android TV box Connection type:wired Interface: USB 2.0 Rotation angle: 180 to 900 degrees 2 Vibration motors feedback Steering wheel diameter : 26cm D-Pad: 4-way Adjustable sensitivity The type of fastening to the tabletop: 2 clamps +suction cup The quantity of buttons: 18 Cable length: 1.8 M Power supply: Wired USB Connection 

8-In-1 900° Racing Wheel  Racing Wheel,P S 5 Steering Wheel Plug and Play Gaming Driving  900° Steering racing wheel with Pedals Shift Bundle,Hall effect sensing,free switching,High grade leather comfortable and delicate  

Vask Components HK Co

- Easy for cord-mounting and installation on wooden devices or light fixtures - Accept a wide-range of Cable types - 1 cable-IN + 2 cable-OUT 

2P Junction Box with Screwless Cable-Clamp & 2-pole Pushwire Connector - TB-01

Dongguan Yacenter Electric Co., Ltd

This is a wire harness that is bounded together by clamps, cable ties, cable lacing, sleeves, and so on. The wire harness transmits information signals or operating currents effectively. It can be used in the automobile alarms.
 
  Highly durable. 
  Good performance. 
 

Car Alarm Wire Harness

This is a car wire harness that is bounded together by clamps, cable ties, cable lacing, sleeves, conduit etc. The wire harness transmits informational signals or operating current effectively. It can be used in the automobile and construction machinery.   Material: PVC.   Good performance.  

Car Wire Harness

Changzhou Pioneer Electronic Co., Ltd.

 	 2-15mm clamp snap on rod EMI ferrite core 	 Description of EMI cable ferrite core 	 Rouble Cable EMI Suppression Core 	 Round Cable Snap-Its 	 ROHS compliance 	 Features of split clamp cable ferrite core 	 Helps reduce EMI on AC power lines. 	 Easy Structure and convenient installation. 	 Just clip it on and you will get clearer signal and faster data transmission. 	 Round cable snap-its can easily accommodate round cable or bundled wires with diameters from 2mm to 15mm. 	 These assemblies are available in four ferrite material classes to suppress differential or common-mode conducted EMI from 1MHz into the GHz region. 	 The polypropylene cases are meeting the ROHS restrictions of hazardous substances and have a flammability rating of UL94-VO. 	 Rouble cable snap-it assemblies are controlled for impedance only. The impedance listed are typical values. Minimum impedance. 	 Application of clamp cable ferrite core 	 All kinds of signal cables and power cables 	 Internal and external power cables 	 Internal cables between PC boards and data connectors 	 Computer peripherals, digital camera 	 DVD, fax machine cables, monitor cables 	 Power supply cables, and printer cables  

Clamp Snap on Rod EMI Ferrite Core

Zhejiang Jinyu Wire & Cable Co., Ltd

This finely manufactured cable effectively transmits electric currents. The high-quality cable delivers great performance. It is sturdily constructed for a long service life.
The application characteristics of products: 
&bull;	Cost saving 
&bull;	Safe operation performance 
&bull;	Easy installation 
&bull;	Well protection 
&bull;	Durable 
&bull;	Theft-proof 
&bull;	Fire-proof

Application areas: 
&bull;	YJHLV6 lays with open wire or concealed laying in non humid environment, and has the same properties of pipe laying mode. 
&bull;	YJHLV62 lays with open wire or concealed laying in dry and wet environment; it uses support/ ladder/ tray/ cable clamp indoor and directly burial/ cable trench/ tunnel outdoor for laying. 
&bull;	YJHLV lays indoors or in tunnel/ piping/ cable trench/ loose soil, but cannot bear external mechanical forces. 
&bull;	YJHLV22 can bear external mechanical forces, which lies in the underground.



Aluminum Alloy Cable

H.K. Li Sheng Electronics Co., Ltd

Features 	 25 mm(1 inch) Mylar tweeter. Carefully selected for its smooth response and power handling. 	 165 mm(6.5 inch) polypropylene cone bass/mid driver. Good bass extension and seamless mid range integration with tweeter. 	 Integral mounting bracket. Offers 360 degree multi-angle mounting options with good cable access to speaker terminals. 	 Paintable. -The tough, moulded enclosure is fully weather resistant and paintable.  Applications 	 Patio, Poolside, Sauna, Yacht 	 Multi Room systems 	 Home Theatre systems 	 Lounges, Bars, Boutiques 	 Boardrooms &amp; Offices 	 Airports, Convention Centres, Hotels 	 Live Theatre/Concert Hall fill-in 	 Houses of Worship 	 Sports Arenas  Product contains 	 1 pair of speakers with bracket (one active+one passive) 	 One power cable 	 One audio cable 	 Colour gift box 	 Manual (provided by customer)  Specifications 	 Speaker Loudspeaker system: 2-way 	 Woofer: 6.5 inch Polypropylene 	 Tweeter: 1 inch Mylar 	 Magnet Size: 14.19Oz 	 RMS Power: 40W 	 Frequency Response: 55Hz-20 kHz 	 SPL 1W/1m: 89dB 	 Max SPL 1m: 101dB 	 Nominal Impedance: 8 Ohms 	 Amplifier Power Output: 2x17.5W @ 8 ohms 	 Frequency Response: 20Hz-20kHz 	 Equalization: 2bands EQ&plusmn;10dB 	 Gain: 39dB(max) 	 Terminals: cable clamps up to &Oslash;5mm(0.2in.) conductor 	 Wireless: Bluetooth V 4.0(supply with remote control) 	 Transmission Distance: 10m (line of sight) 	 Dimensions (H x W x D): 306*197*209mm 	 Net Weight (1 pair): 8.2kg 	 IP Rating: IP X6  

Outdoor Bluetooth Wall Speaker

Features 	 19 mm(0.75 inch) silk film dome tweeter. Carefully selected for its smooth response and power handling. 	 102 mm(4 inch) polypropylene bass/mid driver. Good bass extension and seamless midrange integration with tweeter. 	 Integral mounting bracket. Offers both vertical and horizontal mounting options with good cable access to speaker terminals. 	 Paintable. -The tough, moulded enclosure is fully weather resistant and paintable.  Applications 	 Patio, Poolside, Sauna, Yacht 	 Multi Room systems 	 Home Theatre systems 	 Lounges, Bars, Boutiques 	 Boardrooms &amp; Offices 	 Airports, Convention Centres, Hotels 	 Live Theatre/Concert Hall fill-in 	 Houses of Worship 	 Sports Arenas  Product contains 	 1 pair of speakers with bracket (one active+one passive) 	 One power cable 	 One audio cable 	 Colour gift box 	 Manual (provided by customer)  Specifications 	 Speaker Loudspeaker system: 2-way 	 Woofer: 4 inch paper cone rubber edge 	 Tweeter: 0.75 inch silk film dome 	 Magnet Size: 13.1Oz 	 RMS Power: 60W 	 Frequency Response: 80Hz-20 kHz 	 SPL 1W/1m: 88dB 	 Max SPL 1m: 104dB 	 Nominal Impedance: 8 Ohms 	 Amplifier Power Output: 2x30W @ 8 Ohms 	 Frequency Response: 20Hz-20 kHz 	 Equalization: 2bands EQ&plusmn;10dB 	 Gain: 30dB (max) 	 Terminals: cable clamps up to &Oslash;5mm (0.2in.) conductor 	 S Signal Input Connectors(x2): Unbalanced RCA 	 Wireless: Bluetooth V.40 (10m line of sight) WIFI 2.4GHz (110m in open area) 	 Dimensions (H x W x D): 200*180*161mm 	 Net Weight (1 pair): 2.1kg 	 IP Rating: IP X6  

Outdoor WiFi & Bluetooth Wall Speaker

Features 	 25 mm(1 inch) silk film dome tweeter. Carefully selected for its smooth response and power handling. 	 165 mm(6.5 inch) glass fiber cone bass/mid driver. Good bass extension and seamless midrange integration with tweeter. 	 HF output can be increased through alternative terminal connection to compensate for grill coverings. 	 Purpose built for flush mounting into walls. The tough, moulded enclosure is fully weather resistant and paintable.  Applications 	 Multi Room systems 	 Home Theatre systems 	 Lounges, Bars, Boutiques 	 Boardrooms &amp; Offices 	 Airports, Convention Centres, Hotels 	 Houses of Worship 	 Sports Arenas  Product contains 	 1 pair of speakers with bracket (one active+one passive) 	 One power cable 	 One audio cable 	 Colour gift box 	 Manual (provided by customer)  Specifications 	 Speaker Loudspeaker system: 2-way 	 Woofer: 6.5 inch glass fiber cone 	 Tweeter: 1 inch silk film dome 	 Magnet Size: 14.4Oz 	 RMS Power: 30W 	 Frequency Response: 60Hz-20kHz 	 SPL 1W/1m: 89dB 	 Max SPL 1m: 101dB 	 Nominal Impedance: 8 Ohms 	 Amplifier Power Output: 2x25W @ 8 Ohms 	 Frequency Response: 20Hz-20kHz 	 Equalization: 2bands EQ&plusmn;10dB 	 Gain: 30dB(max) 	 Terminals: cable clamps up to &Oslash;5mm (0.2in.) conductor 	 Wireless: Bluetooth V 4.0(supply with remote control) 	 Transmission Distance: 10m ( line of sight) 	 Paintable powder-coated magnetic metal grill 	 Dimensions (Diameter x Depth ): &Oslash; 245*110mm 	 Cutout size :&Oslash;227mm 	 Net weight(1 pair): 3.95kg  

My Sourcing