Hardwares (Tools & Parts)

Siborg Systems Inc

LCR-Reader-R2LCR-Reader R2 offers users a fully automatic LCR and ESR meter with a 0.1% basic accuracy at up to 250 kHz test frequency. The R2 uses a different and more powerful MCU than the MPA model, allowing to process measurements at higher frequencies. R2 also has increased stability over other models with the ability to switch the test signal source resistance from 100 Ohms to 1.4 kOhms. The higher source resistance reduces noise when measuring small resistances. The R2 also boasts the ability for Analog Signature Analysis. ASA is a troubleshooting technique that uses an AC Sine Wave across two points of an electronic component or circuit. The resulting waveform is displayed using voltage for the x axis and current as the y axis. The displayed signature is then comparable to determine the health of the tested component or board.Features on LCR-Reader R2Automatic and manual LCR, ESR, LED/Diode measurements0.1% Basic accuracyAnalog Signature AnalysisAutomatic and manual test frequencies, including 100, 120 Hz, 1, 10, 100 and 250 kHzParasitic offset removal using easy Short/Open calibration1.5 Oz weightMeasures components to a 0201 size (0.6 mm)Gold-plated tweezer tipsDisplays active and reactive impedance componentsNIST Traceable calibration certificate

 LCR-Reader R2 High Frequency LCR-meter

Zhangzhou Weihua Electronic Co Ltd

Small capacitance and inductance digital meter DM6243B

LCR-Reader R3 offers users a fully automatic LCR and ESR meter with a 0.1% basic accuracy at up to 100 kHz test frequency. It is the first of its kind tool offering multilingual interface: English, German, French, Spanish, Italian, and Chinese The R3 uses a different and more powerful MCU than the MPA model, allowing to process measurements at higher frequencies. The R3 also boasts the ability for Analog Signature Analysis. ASA is a troubleshooting technique that uses an AC Sine Wave across two points of an electronic component or circuit. The resulting waveform is displayed using voltage for the x axis and current as the y axis. The displayed signature is then comparable to determine the health of the tested component or board. Features on LCR-Reader R3 Automatic and manual LCR, ESR, LED/Diode measurements0.1% Basic accuracyAnalog Signature AnalysisAutomatic and manual test frequencies, including 100, 120 Hz, 1, 10, and 100 kHzParasitic offset removal using easy Short/Open calibration1.4 Oz weightMeasures components to a 0201 size (0.6 mm)Gold-plated tweezer tipsDisplays active and reactive impedance componentsNIST Traceable calibration certificateLCR-Reader-R3 Manual

 LCR-Reader R3 LCR-meter with Multilingual Interface

LCR-Reader-MPA is the prize winners in Plant Engineering's Product of the Year 2020.  LCR-Reader-MPA is a professional Digital Multimeter with a record high 0.1% basic accuracy and an unrivalled selection of test functions. In addition to conventional LCR-ESR measurements it provides LED/Diode test, AC/DC Voltage/Current and Frequency measurements, Oscilloscope and Signal Generator. A wide range of 11 test frequencies, including 100 kHz, allows delivering 0.001 pF and 0.1 nH resolution for inductance and capacitance measurements respectively. Fully automatic &amp; manual LCR, ESR, LED/Diode measurements0.1% Basic AccuracyAutomatic &amp; manual test frequencies; including 100, 120 Hz, 1, 10, 20, 30, 40, 50, 60, 75 &amp; 100 kHzTest signal levels of 0.1, 0.5 &amp; 1.0 VrmsEasy Open/Short Calibration and offset removalAC/DC voltage measurements up to 15 VAC/DC current measurementsLED testing with 3.2 VoltsSignal Generator with Sine wave up to 100 kHzOscilloscope Transient Voltage up to 100 kHz100 Ohms Signal Source ResistanceDisplays active &amp; reactive impedance componentsGrey Backlit LCD displayGold-plated test leads1.4 oz. WeightLi-Po battery &amp; micro-USB charging portHandles components to a 0201 size4-way joystick navigational button1 Year Warranty

LCR-Reader MPA All-in-One Multimeter

Kilter Electronic Institute Co., Ltd.

 	 3 1/2 digits LCD with max. reading of 1999 	 Vector measurement 	 Wide range ,high accuracy 	 Power consumption: less 5.5mA/9V 	 Battery Indication: &quot;LO BAT&quot; appears on display when approximately 10% battery life remains. 	 &nbsp; 	 Specification 	 &nbsp; 	 Specifications 	 Range&nbsp; 	 &nbsp;Accuracy &plusmn; (%rdg+digits) 	 Capacitance &nbsp;200pF 5%rdg+2d 	 &nbsp;2n/20nF 1%rdg+2d 	 &nbsp;200nF 0.5%rdg+2d 	 &nbsp;2&mu;F 1%rdg+2d 	 20&mu; 2%rdg+2d 	 &nbsp;200&mu;F 3%rdg+2d 	 &nbsp;2m/20mF 5%rdg+2d 	 Inductance&nbsp; &nbsp;200&mu;H 5%rdg+2d 	 &nbsp;2mH 3%rdg+2d 	 20m 2%rdg+2d 	 200m 1%rdg+2d 	 &nbsp;2H 2%rdg+2d 	 &nbsp;20H 3%rdg+2d 	 &nbsp;200H 5%rdg+2d 	 &nbsp; 	 Dimensions&nbsp; 180(L) x 82(W) x 38(H)mm 	 Weight 280g 	 pcs\carton 20 	 N.W. 7.2kg 	 G.W. 8.0kg 	 packing carton size 41 x 33 x 30 cm  

LC-9243 LC Meter

Changzhou Fenfei Electronic Co., Ltd

High quality multi-purpose test probe is suitable for the measurement of precision circuit and micro electronic components,especially for the measurement of the widely used SMD chip component. It is the best partner of inductance capacitance meter, LCR bridge multimeter and so on. 

NUELEAD SMD LCR Chip Test Clip Capacitance Inductor Resistance Test Clip Meter L

MCH Instruments Co., Ltd.

This digital LCR meter is designed to offer quick and accurate measurement of inductance, capacitance and resistance of an electrical component. It features a large backlit display and a control panel for ease of operation. The reliable LCR meter boasts a long lifespan and requires little maintenance.

 
  Measuring range: L 0.00001&mu;H&ndash;9.99999kH C 0.00001pF&ndash;999.999mF Z,R 0.00001&Omega;&ndash;99.9999M&Omega; D 0.00001-9.99999 Q 0.00001-99999.9. 
  Durable for use. 
 

My Sourcing

Unfollow this supplier?

Unfollow this supplier?