Home Storage & Organization

MGM Industries & Company

INTRODUCTION Chicken isolator is Positive pressure isolator. BCI-I Chicken Isolator is designed for SPF chicken feeding and poultry disease testing.  ADVANTAGE 1. Automatic feed water system, labor saving. 2. Special sealing design, ensure good sealing performance. 3. Manipulation of the chicken can be realized via gloves from both sides. 4. Adopt full 304 stainless steel material, high quality accessories, such as Butyl gloves, HEPA filter etc. 5. Filtration system, can protect animals, environment and operator. Pre-filter › main HEPA filter › Filter cotton. 6. Three sterilization ways available. (I) UV lamp for sterilization. (II) Reserved hole for hot steam sterilization. (III) Reserved hole for disinfectant        spraying sterilization. 7. Unique defecation system &amp; fecal leakage shelf. Animal wastes drop from shelf to bottom fecal collection film, then pull of collecting film and clean    out wastes conveniently and quickly, reduce the cleaning frequency. 

Chicken Isolator

Puyuan Electronic Illumination Co Ltd

 	 10W outdoor wall LED light waterproof recessed wall light outside wall light 	 This item can used as step light / wall Light/ inground Lights. 	 PVC mounting sleeve. 	 Aluminum housing 6063 (not 6060). 	 20~25 &mu;m thickness of protective Passivated film for housing. (The general die-casting Aluminum housing is only with about 5 &mu;m epoxy powder paint finish film which is easier to be fading and corrosive, and the water can seep into the small holes inside, then damage the fixture.) 	 Frosted tempered glass trim without visible frame or screws design which make it with wonderful light effect. 	 Won&#39;t be glare&nbsp; 	 Waterproof IP67. 	 H05RN-F 2x0.75 mm square cable. 	 PG7 connector + Silicone seal waterproof design. 	 With silicone O-ring to lock the lamp body to the sleeve for fast and easy installation. 	 Professional sales and technicians to serve you.  

LED Stair Step Light

Xiamen Consolidates Manufacture And Trading Co Ltd

Special features: 1.The moth trap capturesand killsclothes moths in your wardrobe, safe and eco-friendly for your family 2.Theodorless pheromone on the trap attracts moths, and trapping them by the sticky glue, won’t escape again 3.You can hang the trapdirectly next to your clothes on the hanger bar  Application situations: Indoor closet  Using steps: 1.Peel off the film paper on the glue 2.Insert the plate into the cleft of the paper trap after folding along the line 3.Insert one rope through the holes and hang it in the wardrobe 

Home Hanging Sticky Glue Pheromone Lure Clothes Moth Trap

Firstsing Co Ltd

Tablet Case for iPad PRO 11'' 2020 The cases compatible with:Apple iPad Pro (11-inch 2nd generation) 2020 A2228Apple iPad Pro (11 inch 2nd generation) 2020 WiFi A2068 A2230 A2231Rotary case with a stand function, dedicated to tablets.After opening the case, we have access to the entire screen, including the webcam.The case does not cover any button or slot, all slots and buttons on the sides are freely accessible.A dedicated case for tablets also acts as a stand in which the tablet can be placed both vertically and horizontally at three different angles.Made of durable ecological leather and reinforced structure perfectly protects the device against accidental damage and abrasions.The case also has a hole for the camera lens, you do not need to take the tablet out of the case to take photos or film. The cover is closed with a flexible rubber strap that prevents accidental opening.

Tablet Case for iPad Pro 11''

Bequator Corporation Ltd

***Nikon AF-S NIKKOR 85MM F/1.8G Lens By FedEx*** focal length 85 mm Maximum aperture f/1.8 Minimum aperture f/16 Lens structure 9 groups 9 elements Draw corner Nikon film SLR cameras and FX format digital SLR cameras: 28°30'; Nikon DX format digital SLR cameras: 18°50'; IX240 system cameras: 22°50' Focus Nikon's internal focus (IF) system is equipped with an autofocus function controlled by a quiet wave motor, and a separate focus ring for manual focus The shortest focusing distance 0.8 m (2.62 ft) from focal plane Maximum reproducibility ratio 0.124 times Number of aperture blades 7 (circular aperture hole) Filter interface size 67 mm (P=0.75 mm) size Approximately 80 mm (diameter) x 73 mm (from the edge of the lens mount) weight About 350 g (12.4 oz) Please note that Phone is Free Fed-ex Shipping to USA,Canada,UK,Germany,Australia,Japan !!! Brand New Original, package will be opened one time for testing purposes before shipping out,thanks. Summary of My Selling Policies Payment Payment Method Accepted: PaypalMy preferred payment method is by Verified Paypal (With Confirmed Address) VAT / Import Duty We do not charge any sales taxes and handling fees. In any event, we are not responsible for tax (VAT)/ Import Duties or any equivalent arises from the delivery transaction. Please check your local custom legislation and visit your local customs department website before purchases. Shipping Shipping &amp; Handling Charge Online Tracking numbers for easy tracking FedEx / EMS Free     (North America, Canada, Australia, Japan)Free     (Mexico, United Kingdom,Germany)US$42.00 (South America, Central America, Middle East, Eastern Europe Countries)No exchange will be given if the item is lost in transit by FedEx/UPS unless shipping insurance is bought. Delivery You may expect to receive your item in about 3 to 5 Days time for Fed-ex or UPS Delivery. Replacement No replacementwill be given if the item is damaged, missed during shipping, unless insurance is covered. Warranty The Company warrants that the Goods are of satisfactory quality. Unless stated otherwise, all goods sold by bq_shop Online eBay store varies a 12 months bq_shop international Warranty. The Company shall not be liable for any breach of warranty if the Buyer makes any further use of the Goods after giving such notice or alters or repairs the Goods without the agreement of the Company. Warranty does not cover for accident, water, abuse, misuse or other human error causing the product damage. Buyer is liable for labour and material charges where parts replaced. ContactMe The best way to contact me is through eBay Message.My average respond time to an email is within 24 hours. 

Nikon AF-S NIKKOR 85MM F/1.8G Lens By FedEx

Hana Living

This cutting board is designed in sharp colors for a cheerful mood. It offers durable use with&nbsp;the pure silver and polyester film. The board comes with a hanging hole to save space in kitchens.   Composition: 5ppb of silver ion.   Easy to clean.  

Colored Cutting Board

United Sources Ind'l Enterprises

  The capacitance of the multi layer capacitor is from 1PF to 10,000UF  The applied voltage to the chip capacitor should range from 6.3V to 2KV  The tantalum metal capacitor has package with Through-hole and 5MD  The tolerance of the film capacitor is from +  0.1PF to +80-20%  The electrolytic capacitor is of high quality, suitable for many electronic device  

Capacitor

Rara Electronics Corporation

This power film resistor&nbsp;is a surface-mounted and&nbsp;high-power resistor.&nbsp;It&nbsp;has a large resistance range from 100mΩ to 51KΩ.&nbsp;It is suitable for high-frequency applications and high-speed pulse circuits.&nbsp;It can handle 30W (surface mount) and 35W (through hole) in a compact molded package.
 
  Molded housing. 
  Through-hole or surface-mount techniques. 
  Low 2.3C/W heat resistance.&nbsp; 
  Non-inductive. 
  Offers excellent heat dissipation. 
 

Power Film Resistor

Qindao Jinlong Plastic Compound Color Printing Co Ltd

 This is a rectangular-shaped coffee bag featuring a stand-up style. With a three-side sealed design, the coffee bag can effectively protect coffee from moisture and insect. It can also be plain or printed with customized graphics, logos and texts for promotional use.    With resealable zipper.   With hanger or euro hole.   Shiny or matte finishing.   With tin-tie if needed.   Metallic film or foil.   Quad-sealed with tear notch.  

Coffee Bag

Faratronic (Hong Kong) Company Limited

  These are film capacitors pulse and interference suppression film capacitors  It has different size to fit in different holes of electrical components  It is classified in different colours which are brown, buff and dark green  It is suitable for manufactures and factories use  

Film Capacitors

Chuo Electric Works Ltd

This&nbsp;two dimensional measuring device uses a CCD camera for automatically measuring the outer shape, line and surface dimensions of attachment holes of planar sheets such as polarizing plates for LCDs, light guide, reflecting and dispersing panels for backlight units and lens sheets, as well as the dimensions and shapes of printing boards, printing matrices and other metal, plastic, rubber and sponge items (some shapes may be semi-automatic). Measurements are accurate regardless of changes in magnification, camera attachment angle and optical image distortion. Measurement results are output to a file in CSV format for reference in Excel, etc.
 
  2D auto measuring equipment. 
  Image inspection system. 
  Two dimensional measurement, dimensional test, quality control, image processing, flat panel, LC film, backlight, polarizing sheet, printing board, tablet, film processing product, smartphone, protection film, CAD, color filter, screen printing, etc. 
 

Measuring Device

Richson Int'l Trading Limited

  HOW 32 W&rsquo;s Softshell Cycling Jacket 
Materials in 100% Polyester 30D Interlock + Bonded + 100% Polyester 30D Interlock, Water Repellent, Wicking, Quick-dry, 150g/m2.
&nbsp;
The jacket has
- Styling with front yoke seam and ventilation folded back yoke
- A stand up collar for wind protection
- Two lower decorative films welded #3 Nylon reversed zip pockets &nbsp; with mesh fabric pocketing bags
- Slanting full-front #5 plastic zipper through stand up collar with zip garage
- Polyester lycra inner cuffs with thumb holes
- Drop &ndash; tail bottom, made with elastic drawcord &amp; cord locks
- Hip length.&nbsp; 

Women's Cycling Softshell Jacket

Zhongshan Leelo Lighting Co.,Ltd

 	 30W multifunctional flood light housing (made in China) 	 Model no.: LEM30W 	 Dimension of body(LxWxT): 185mm x 155mm x 44mm 	 thickness of radiating:&nbsp;fin thick 	 IP rating: IP66 	 Housing material: aluminum ADC12 	 Panel type:&nbsp;metal or aluminum 	 Color: Black/White/Gray 	 Beam angle: 120&deg; 	 Working temperature:&nbsp;-20&deg;C-50&deg;C 	 SMD reflectors hole size: 90mm x 30mm 	 Application :suitable for SMD 	 Standard configuration: light body + tempered glass + reflector + waterproof rubber ring + holder + several screws 	 Notes: The product is only fittings not finished product, couldn&#39;t be light up. If you need finished product, you need driving power and LED chip. The product need to be assembled by professional. Please tear off the protective film from the reflector before make assembly.  

LED Flood Light Housing

 	 50W multifunctional flood light housing 	 Model no.: LEM50W 	 Outline: rectangle 	 Dimension of body(LxWxT): 230mm x 195mm x 45mm 	 thickness of radiating:&nbsp;fin thick 	 IP rating: IP66 	 Net weight: 0.903kg 	 Housing material: aluminum ADC12 	 Panel type:&nbsp;metal or aluminum 	 Color: Black/White/Gray 	 Beam angle: 120&deg; 	 Working temperature:&nbsp;-20&deg;C-50&deg;C 	 SMD reflectors hole size:&nbsp;118mm*38mm 	 Application :suitable for COB or SMD 	 Standard configuration: light body + tempered glass + reflector + waterproof rubber ring + holder + several screws 	 Notes: The product is only fittings not finished product, couldn&#39;t be light up. If you need finished product, you need driving power and LED chip. The product need to be assembled by professional. Please tear off the protective film from the reflector before make assembly.  

New design 50W SMD Flood Light Housing

 	 20W multifunctional flood light housing 	 Model no.: LEM20W 	 Outline: rectangle 	 Dimension of body(LxWxT):&nbsp;135mm x 115mm x 36mm 	 thickness of radiating:&nbsp;fin thick 	 IP rating: IP66 	 Net weight: 0.332kg 	 Housing material: aluminum ADC12 	 Panel type:&nbsp;metal or aluminum 	 Color: Black/White/Gray 	 Beam angle: 120&deg; 	 Working temperature:&nbsp;-20&deg;C-50&deg;C 	 SMD reflectors hole size: 67mm x 27mm 	 Application :suitable for COB or SMD 	 Standard configuration: light body + tempered glass + reflector + waterproof rubber ring + holder + several screws 	 Notes: The product is only fittings not finished product, couldn&#39;t be light up. If you need finished product, you need driving power and LED chip. The product need to be assembled by professional. Please tear off the protective film from the reflector before make assembly.  

20W SMD Flood Light Housing

 	 150W LED Flood light housing 	 Model No. :LER150W-T 	 Outline :rectangle 	 Dimension of Body(LxWxT) :430mm*325mm*100mm 	 Thickness of radiating :fin Thick 	 IP Rating :IP66 	 Net Weight :5.36kg 	 Housing Material :aluminum ADC12&nbsp; 	 Panel Type :Metal or Aluminum&nbsp; 	 Color :Black/White/Gray&nbsp; 	 Bean angle :120&deg; 	 Working temperature :-20&deg;C-50&deg;C 	 SMD Reflectors hole size :185mm*120mm 	 Difference Thickness of radiating fin are different,so the weight are different 	 Application Suitable for :COB or SMD 	 Standard configuration: Light body+tempered glass+reflector+waterproof rubber ring+holder+sevral screws 	 Notes: The product is only fittings not finished product, couldn&#39;t be light up. If you need finished product, you need driving power and LED chip.The product need to be assembled by professional. Please tear off the protective film from the reflector before make assembly.  

Long-distance Die Casting 150w Led Flood Light

 	 10W/20W Multifunctional Flood Light Housing 	 Model No.: LEM10W,LEM20W 	 Outline: rectangle 	 Dimension of Body(LxWxT): 135mm x 115mm x 36mm 	 Thickness of radiating: fin thick 	 IP Rating: IP66 	 Net Weight: 0.332kg 	 Housing Material: aluminum ADC12 	 Panel Type: Metal or Aluminum 	 Color: Black/White/Gray 	 Bean angle:120&deg; 	 working temperature: -20&deg;C-50&deg;C 	 SMD Reflectors hole size: 67mm x 27mm 	 Application Suitable for: COB or SMD 	 Standard configuration: Light body+tempered 	 glass + reflector + waterproof rubber ring + holder + sevral screws 	 Notes: The product is only fittings not finished product, couldn&#39;t be light up. If you need finished product, you need driving power and LED chip. The product need to be assembled by professional. Please tear off the protective film from the reflector before make assembly.  

10W 20W Die Cast Aluminum LED Flood Light Housing

 	 30W outdoor LED Flood light housing 	 Outline square 	 Dimension of Body(LxWxH) 226mmx221mmx53mm 	 Thickness of radiating fin Thick Medium thick 	 IP Rating IP66 	 Housing Material aluminum ADC12 	 Panel Type Metal or Aluminum 	 Color Black/White/Gray 	 Bean angle 120&deg; 	 Working temperature -20&deg;C-50&deg;C 	 SMD Reflectors hole size 52mmx52mm 	 Difference Thickness of radiating fin are different, so the weight are different 	 Application Suitable for COB or SMD,&nbsp; Better for SMD 	 Standard configuration: 	 Light body+tempered glass+reflector+waterproof rubber ring+holder+sevral screws 	 Notes: The product is only fittings not finished product, couldn&#39;t be light up. If you need finished product, you need driving power and LED chip.The product need to be assembled by professional. Please tear off the protective film from the reflector before make assembly.  

30W Outdoor LED Flood Light Housing

 	 Classical Type High Lumens 100W SMD Flood Light Housing 	 100W multifunctional flood light housing 	 Model no.: LEM100W 	 Outline: rectangle 	 Dimension of body(LxWxT): 285mm x 240mm x 55mm 	 thickness of radiating:&nbsp;fin thick 	 IP rating: IP66 	 Net weight: 1.34kg 	 Housing material: aluminum ADC12 	 Panel type:&nbsp;metal or aluminum 	 Color: Black/ White/ Gray 	 Beam angle: 120&deg; 	 Working temperature:&nbsp;-20&deg;C-50&deg;C 	 SMD reflectors hole size: 168mm x 50mm 	 Application: suitable for COB or SMD 	 Standard configuration: light body + tempered glass + reflector + waterproof rubber ring + holder + several screws 	 Notes: The product is only fittings not finished product, couldn&#39;t be light up. If you need finished product, you need driving power and LED chip. The product need to be assembled by professional. Please tear off the protective film from the reflector before make assembly.  

100W SMD Flood Light Housing

 	 200W LED Flood light housing 	 Model No. :LER200W-TS LER200W-TM LER200W-TL 	 Outline :rectangle 	 Dimension of Body(LxWxT) :430mm*325mm*100mm 415mm*345mm*110mm 455mm*385mm*115mm 	 Thickness of radiating :fin Thick&nbsp; 	 IP Rating :IP66 	 Net Weight :5.36kg 6.8kg 8.1kg 	 Housing Material :aluminum ADC12 	 Panel Type :Metal or Aluminum 	 Color :Black/White/Gray 	 Bean angle :120&deg; 	 Working temperature -20&deg;C-50&deg; 	 SMD Reflectors hole size :185mm*120mm 200mm*85mm 200mm*108mm 	 Difference 200w flood light has three types with different size and weight. 	 Application Suitable :for COB or SMD 	 Standard configuration: Light body+tempered glass+reflector+waterproof rubber ring+holder+sevral screws 	 Notes: The product is only fittings not finished product, couldn&#39;t be light up. If you need finished product, you need driving power and LED chip.The product need to be assembled by professional. Please tear off the protective film from the reflector before make assembly.  

Ip65 die casting led Flood Light Housing Light cover

FOSHAN SUCCESS JEWELLERY CO LTD

Introduced here is a round and slender pendant made with sturdy stainless steel. On the pendant features delicate leaf-inspired pattern, while the background is coated with light-tone epoxy to accentuate the motif. The slide bail at the top allows you to pair it with any types of chain. 	 Material: stainless steel and epoxy. 	 Round and slender pendant. 	 Cut-out hole at the center. 	 Delicate leaf pattern. 	 Pattern coated with light-tone epoxy. 	 Slide bail for threading chain. 	 Laidback style for refined attires. 	 Color: silver, IPB or IPG plating.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;  Sale terms: 	 OEM, ODM design available. 	 New designs are welcome. 	 One year quality guaranteed. 	 Laser/engraving logo service provided upon request. 	 MOQ: 100 piece(s). 	 Leading time: 35-60 days. 	 Packaging: PP bag, static film, gift box.  Payment terms: 	 Price terms: ex-works, FOB. 	 30% deposit, 70% before shipping. 	 Payment way: TT, Western Union, Money Gram, Pay pal. 	 Fast delivery and low shipping cost. 	 Obtains discount from DHL, FedEx, UPS, TNT, EMS, etc. 	 Attentive service and smooth export procedure.  

Custom-Made Pendant 

LPKF Laser & Electronics AG

   The LPKF ProtoLaser S laser system structures complete PCBs in minutes-with a layout area of approximately 229 x 305 x 10mm (9&quot; x 12&quot; x 0.4&quot;). The huge time savings mean that different layouts can be tested quickly and simply. Prototypes and small production batches can also be produced on short notice if required. The system requires no chemicals and is easy to operate.   The LPKF ProtoLaser S is even more precise than the mechanical systems and is therefore ideal for HF and microwave circuits, as well as digital and analog circuits. It produces precise geometries on a whole range of substrates such as copper-clad FR4, aluminum-coated PET films, ceramics, duroid and PTFE.   Alignment for two-sided prototypes increases tremendously with the fiducial recognition camera. This camera allows the LPKF ProtoLaser S to visually inspect and properly align the workpiece.   For drilling through-holes in printed circuit boards, an LPKF ProtoMat is a perfect complement to a LPKF ProtoLaser S.  

LPKF ProtoLaser S

Babyguard Sanitary Products Co Ltd

   Breathable backsheet: cloth-back film with four color printing carton.breathable backsheet makes the air runs out off baby buns,keeps baby dry.   Fluff magic frontal tape: high quality 3M velvet tapes reduce tear voice and more fastness to fix diaper around baby body.   Waist band:PU elastic waist band softly compact on baby back,your baby is allowed to move freely.   Elastic grip tabs:resilience tapes allowed baby move more freely, tapes are easy to companct on baby belly,and the elastic parts makes breathing more comfortable.   Topsheet:we have pure cotton sheet perforated and use it on baby diaper,the cotton sheet more soft than others and absorp quickly,hundreds holes circle the air quickly from buns to keep body dry and clean.   Aloe oil:we extract aloe oil and spread on diaper top sheet,the pure essential effectively avoid diaper rush to baby.   3D leaking guards:3D cutting makes leaking protector more efficiently,the guards could hold at least three times baby urine.   Leg cuffs:elastic leg cuffs circle around baby legs.   S shapes cutting: human shape cutting is more fit to baby.  

Baby Diapers

WENZHOU SINMORS PAPER PRODUCTS CO LTD

Reusable PVC Printing Wall Decal Peel and Stick Adhesive Removable 3D Butterfly Wall sticker

  Reusable PVC Printing Wall Decal Peel and Stick Removable Adhesive Wall sticker  
1.Colorful and various design can choose.
2.Easy to apply and remove,non-toxic.
3.Can apply to anywhere you like , such as book, wall, door, window, room etc.&nbsp;&nbsp;
4.After it&nbsp;is&nbsp;removed carefully,there is no dirt left.
5.Nice gifts for children,home decoration.
6.Any design and size can be made.
7.The final price is according to client&#39;s&nbsp;quantity and&nbsp;requirements.

  Purpose:   The butterfly has a variety of uses, including home decoration, shop window displays, wedding marriage room, holiday decorations and promotional activities and the shooting scene decorative props. Available in different colors or the same color butterfly put on a variety of shapes, very beautiful.&nbsp;
  Size:     30*30cm/ 50*70cm/60*90cm or as customer&#39;s requirements
  Material:   PVC sticker
  Printing:   Any color of Pantone, as customer requirement
  Surface disposal:   Glossy lamination +UV coating , matt lamination , glossy vanishing, hot stamping,
  Packaging:   According to customer&#39;s requirement
Machine for production: Film exposure machine , JENKY stickers   printing machine;&nbsp;   roll slitter machine , label cutting machine, computer holes machine , hot stamping machine
  Quality control:   Materials selected, pre-printing checked, IPQC, finished goods all QC passed
  Sample time:   3-5 working days
  Mass production time:   7-15 days after sample confirmed&nbsp;
  MOQ:    500&nbsp;pcs 
  Monthly supply :   1000,000pcs
  Payment term :   By T/T, L/C, Western Union, Cash, PayPal.

My Sourcing

Unfollow the following supplier?

Unfollow the following supplier?