Light Bulbs & Tubes

SHANGHAI XINLONG PLASTIC MANUFACTURING CO.,LTD

 This is a butt connector featuring heat-shrink tubing for safety. Made of copper, this connector is durable with good electricity conductivity. This high quality&nbsp;butt connector is convenient to use. 
 
  Heat shrinkable insulated. 
  Maximum electrical rating: 150 degrees 600V. 
  Terminal body: copper. 
  Insulation: heat-shrink tube. 
 

Butt Connector

Shenzhen Jddtech Co., Ltd

This heat-shrink tube is built with a&nbsp;normal wall. A newly developed environmentally friendly product,&nbsp;this heat-shrink tube is&nbsp;flame-retardant.&nbsp;Uses modified polymer, it is cross-linked by an electronic accelerator.&nbsp;This heat-shrink tube offers an economic and efficient solution for the insulation and protection of cable splices and terminals. 	 High quality. 	 Flame-retardant and durable. 	 Assorted colors are available, including transparent.  

Heat-Shrink Tube

Changyuan Electronic (Shenzhen) Co Ltd

 This heat shrinking tube comes with various colors for your preference. The tube features halogen-free construction for improved strength. This heat shrinking tube boasts a long lifespan. 
 
  Shrink temperature: 90&deg;C. 
  Operating temperature range: -55&deg;C-125&deg;C. 
  Radial shrinking ratio: &gt;=50%. 
  Longitudinal change: &lt;=5%. 
  Tensile strength: &gt;=10.4MPa. 
  Elongation at break: &gt;=200%. 
 

Heat-Shrinking Tube

As shown is a heat-shrinking tube that shrinks at a high temperature. The tube has high tensile strength for excellent durability. Insulate and protect electric cables with this reliable tube. 

 
  Min. shrink temperature: 140&deg;C/155&deg;C. 
  Operation temperature range: -55&deg;C to 150&deg;C/-55&deg;C to 175&deg;C. 
  Tensile strength: &gt;=30MPa/&gt;=34.5MPa. 
  Elongation at break: &gt;=150%/&gt;=150%. 
  Elongation at break after aging: &gt;=100%/&gt;=50%. 
 

These top-quality heat shrink tubes are made from polyester and polyolefin yarns. The unique woven construction makes it extremely flexible for providing excellent abrasion resistance and easy installation onto irregular shapes. These heat shrink tubes are suitable to be used in harsh environments to provide vibration and noise suppression. 	 Heat shrinkable fabric expandable braided sleeving tube. 	 2:1 shrinkable ratio. 	 Flame retardant. 	 Abrasion and corrosion resistance. 	 Mechanical, resistance and weathering UV and abrasion resistance. 	 Operation temperature: -40 to 125℃. 	 Minimum Shrink temperature: 80℃. 	 Minimum fully recovery temperature: 120℃  

Heat Shrink Tube

This heat-shrinking tube showcases high tensile strength for added durability. The excellent fluid resistance guarantees the best protection of the tube wires. Protect electric cables and wires with this protective tube.&nbsp;

 
  Shrink temperature: 110&deg;C. 
  Operating temperature range: -55C-125&deg;C. 
  Radial shrinking ratio: &gt;=50%. 
  Longitudinal change: &lt;=10%. 
  Tensile strength: &gt;=10.4MPa. 
  Elongation at break: &gt;=200%. 
 

Displayed is heat-shrinking tube that shrinks at a high temperature. The tube features a large range of operating temperature, ensuring an extended lifespan. It also features high tensile strength for enhanced durability. 

 
  Min. shrink temperature: 175&deg;C. 
  Operating temperature range: -55&deg;C-200&deg;C. 
  Elongation at break: &nbsp;&gt;=8MPa. 
  Longitudinal change:&nbsp;&lt;=10%. 
  Dielectric strength: &gt;=9kV/mm. 
 

This heat shrinking tube comes in various diameters for different cable sizes. The tube boasts a large range of operating temperature for an extended lifespan. It also features high tensile strength for enhanced durability. 

 
  Shrink temperature: 125&deg;C. 
  Operating temperature range: -55&deg;C-110&deg;C. 
  Tensile strength: 12MPa. 
  Elongation at break: 400%. 
  Dielectric strength: 20kV/mm. 
 

This heat shrinking tube comes with&nbsp;various diameters and sizes. The tube is made of high-grade material to ensure reliable strength. This tube is a protective jacket for electrical wires. 

 
  Operating temperature range: -55&deg;C-135&deg;C. 
  Tensile strength: &gt;=14.1MPa. 
  Elongation at break: 329%. 
  Aging in circulation air oven: 175&deg;C +/- 2.0&deg;C, 168hr. 
  Dielectric strength: 24kV/mm. 
 

As shown is a heat-shrinking tube with various diameters for your needs. The tube exhibits high impact resistance and a large range of operating temperature which ensure an extended lifespan. Insulate and protect electric cables with this reliable tube. 

 
  Operating temperature range: -40&deg;C-125&deg;C. 
  Minimum full recovery temperature: 110&deg;C. 
  Longitudinal change: 0-10%. 
  Eccentricity: 20%. 
  Tensile strength: 12PMa (min). 
  Elongation at break: 400%. 
  Deformation resistance: 50% (min). 
 

Made from modified polymers and cross-linked by electronic accelerators, these top-quality tubes are eco-friendly, flame-retardant and heat-shrinkable. They offer an economic and efficient solution for the insulation and protection of cable splices and terminals. These durable heat shrink&nbsp;tubes can withstand daily wear and abrasion. 	 Material: chemical, cross-linked (by radiation), thermally stabilized flame retarded polyolefin. 	 Operation range: -55℃-125℃. 	 Shrinking temperature: starting at 70℃, and shrink totally at 110℃ (CB) or 115℃. 	 Shrink ratio: 2:1. 	 Approvals: UL/CSA/SGS/ROHS. 	 Color: black, red, yellow, green, blue, white, purple, gray  

WuJiang Tuoyan Electronic Materials co.,Ltd

 	 heat shrink tube for fishing rod 	 Rohs/UL certificated 	 flame retardant: VW-1 	 Flexible,non-halogen 	 shrink ratio:2:1 	 &nbsp; 	 &nbsp; 	 &nbsp;  

Featured are marker sleeves for heat shrinking tubes. The sleeves boast an&nbsp;excellent adhesive property for sticking on tubes reliably. The sleeves help you organize cables and wires in a convenient way. 

 
  Operating temperature range: -55&deg;C-135&deg;C.&nbsp; 
  Tensile strength: &gt;=10.3MPa. 
  Ultimate elongation ratio at break: &gt;=200%. 
  Dielectric strength: &gt;=19.7KV/mm. 
 

Heat-Shrinking Tube Marker Sleeves

Union Polymer Material Co., Ltd.

A1 wire splice heat shrink tube 
Features
&bull;	Flame retardant (Black only)
&bull;	Operating temperature: -40~135 ℃
&bull;	High shrink ratio (4:1)
&bull;	Shrink temperature: 135 ℃
&bull;	Semi-rigid polyolefin outer layer
&bull;	RoHS compliant 
&bull;	Polyamide adhesive liner
&bull;	Voltage Class：600 V
Typical application
&bull;	Ideal for wire to metal splices and wire to wire joints in automotive industry
&bull;	Clear tubing is specially designed for sealing and insulation of components where see-through inspection is required
Ordering 
&bull;	 Standard color : black ,clear 
Cross reference
&bull;	Raychem/Tyco : ES1000/ES2000
Dimensions 
Reference As supplied(mm)After recovered(mm)Standard length
UPM A1 ID min. ID max. WT nom. m/spool
5.7/1.3 5.7 1.3 1.2 100 
7.4/1.7 7.4 1.7 1.4 100 
10.8/2.5 10.8 2.5 2.0 100 
17.8/4.4 17.8 4.4 2.3 50 


Wire Splice Heat Shrink Tube 

1.Operating&nbsp;Temperature:-55~&nbsp;125&nbsp;centi&nbsp;degree;&nbsp;


2.Shrinking&nbsp;Temperature:Start&nbsp;at&nbsp;70&nbsp;centi&nbsp;degree,and&nbsp;shrunk&nbsp;totally&nbsp;at&nbsp;110centi&nbsp;degree&nbsp;


3.halogen&nbsp;free,&nbsp;flexible,flame&nbsp;retardant;&nbsp;


4.Certificate:&nbsp;SGS&nbsp;test,&nbsp;Rohs,&nbsp;UL,&nbsp;Reach,&nbsp;ISO.&nbsp;


5 .Standard&nbsp;color:black,white,red,yellow,green,blue,&nbsp;more&nbsp;colors&nbsp;available&nbsp;upon&nbsp;request

&nbsp;

6.Shrink ratio: 2:1&nbsp;(3: 1 and 4:1 available. ) 	 &nbsp;  

S3PS heat shrink tube for fiber optic dome closure
Features
&bull;	Heavy wall cross-linked polyolefin 
&bull;	Operating temperature: -55~110℃
&bull;	Innovative locking mechanism, hermetically sealed 
&bull;	Shrink temperature: 125 ℃
&bull;	Spiral polyamide adhesive, mirror like adhesive optional 
&bull;	Shrink ratio: 4:1
&bull;	Excellent UV, corrosion, mechanical damage resistance
&bull;	Thermo-chromatic paint changes color for proper installation

Typical application
&bull;	 Ideal for aerial and underground applications, especially in Fiber Optic Dome Splice Closure 

Ordering 
&bull;	 Standard color : Black 
&bull;	 Special colors (e.g. Clear) are available on request 
&bull;	 Standard packaging is 150mm/pc
Reference
UPM S3PS
28/6
30/6
33/8
38/9
43/9
45/10
55/16
75/22
95/25
105/30


Heat Shrink Tube for Fiber Optic Dome Closure

Shenzhen Woer Heat Shrinkable Material Co Ltd

    Medium-wall adhesive-lined heat shrinkable tubing.    Suited for a variety of low voltage electrical and mechanical applications.   Combines a lighter weight and greater flexibility.   Seals and protects cable splices and terminations.   High resistance to impact and abrasion.   Optional thermoplastic adhesive liner for complete environmental protection and insulation.   Continuous operating temperature: -45&ordm;ċ to 125&ordm;ċ .   Shrink temperature:125&ordm;ċ.   Size: 1mm-200mm.   UL, CSA, SGS, Rohs certified  

Medium Wall Heat Shrink Tube

A2 Protective Heat Shrink Tube with air groove for Water or Rubber Pipe	Abrasionresistancepolyolefinmaterial	Heatshrinksleevewithinnerairgroove	Smoothshrinkage,air-tightsealwhenbent	Halogenfree	Operatingtemperature:-55~125℃	Shrinktemperature:125℃	Shrinkratio:2:1	RoHScompliantTypicalapplication	IdealforexternalprotectionofautomotivewaterorrubberpipesOrdering	Standardcolor:Black

A2 39/13 51/17 Protective Heat Shrink Tube with Air Groove For Automotive Water Or Rubber Pipe

   Single-wall heat shrinkable tube composed of insulated material.   Ranges from 1mm-300mm.   Protective tube wall for enhanced durability.   RSFR-H tubes of fine quality and durable coating to adapt for your various needs.   Meets different environmental demands.   Offers electrical insulation and protection from dust, solvents and other foreign materials   Combines strain relief and fire resistance.   Flexible.   Zero halogen.   Flame-retardant.   Low smoke generation on burning.   Continuous operating temperature:-45℃ to 125℃.   Shrink temperature:120℃.   RoHS and sony compliant.   1mm-300mm.  

Halogen Free Single Wall Heat Shrink Tubing

  6~24 KV Halogen Free Bus Bar Insulation Heat Shrink Tube
Retangular or round shape bare bus bar protector or insulator&nbsp;

Features   	 Medium wall cross-linked polyolefin 	 Bus bar insulation and protection 	 Reduces bus bar clearance requirement 	 Halogen free, RoHS compliant 	 Protects against short circuit and electrical leakage caused by small animals 	 Operating temperature: -40~105 ℃ 	 Shrink temperature: 125 ℃ 	 Shrink ratio: 2.5:1    Typical application   	 Suitable for insulation and protection of bus bar against accidental flashover up to 24 KV 	 Ideal for using in switchgears cabinets where space is limited and air spacing between bus 	 bars need to be kept at minimal    Cross reference   	 Raychem/ Tyco : BPTM   Dimension:&nbsp; 
 25/10 25m/roll&nbsp;
30/12 25m/roll
40/16 25m/roll
50/20 &nbsp;20m/roll
65/25&nbsp;  20m/roll
75/30&nbsp;20m/roll
85/35&nbsp;20m/roll
100/40&nbsp;20m/roll
120/50&nbsp;20m/roll
150/60&nbsp;20m/roll
175/75&nbsp;20m/roll

 Properties  
 1.holding air test: More than 3 bendings on the bus bar, after heat shrink, there is no air gap between tube and the bare bus bar.
2.Low temperature: -40℃/4 hours, no cracking.
3.Pass the cutting test,5mm length along the longitudianl, after 110 ℃/168 hours,after shrinking,no cracking. 

S1(n)-10    6~24 KV Halogen Free Bus Bar Insulation Heat Shrink Tube

 S3(n)-U bolt medium wall halogen free heat shrink tube for u bolt 
  Features  
&bull; Medium wall cross-linked polyolefin
&bull; Operating temperature: -55~105℃
&bull; High resistance to abrasion and impact
&bull; Shrink temperature: &ge;150 ℃
&bull; RoHS compliant
  Dimensions  

&bull; 12/4 0400
&bull; 19/6 0750
&bull; 28/9 1100&nbsp;
&bull; 33/8 1300
&bull; 38/12 1500
&bull; 43/12 1700
&bull;&nbsp;55/16 2050
&bull;&nbsp;65/19 2750

  Typical application  
&bull; Suitable for U-bolt corrosion and mechanical protection.

  Ordering  
&bull; Standard color : Black
&bull; Standard packaging is 15m/spool
&bull; Please specify specification, quantity when ordering
&nbsp;

S3(n)-Ubolt Medium Wall Halogen Free Heat Shrink Tube for U-Bolt 

&bull;	C106 semi-conductive/insulation/electrometric insulation tri-layer heat shrink tube
Features 
&bull;	Cross-linked heavy wall tubing
&bull;	Operating temperature: -55~105℃
&bull;	Tri-layer design with high recovery forces
&bull;	Shrink temperature: 135-150℃
&bull;	Co-Extrusion technology
&bull;	Voltage class: 10-35 KV
&bull;	Eliminates partial discharge
&bull;	Halogen free ,RoHs Compliant
&bull;	Enable the joint to follow the thermally induced dimensional changes of cable insulation.
Typical application
&bull;	Ideal for insulation of power cable joint up to 42KV
Ordering
&bull;	Standard color : Black/Red/Red
&bull;	Standard packaging is 1m/pc or 1.22m/pc
&bull;	Please specify specification, quantity when ordering
Cross reference
&bull;	Raychem/ Tyco: ERIT/ERIC/ERIH Reference
UPM C106
35/13
45/17
50/21
63/26
75/34
85/34
95/42
110/52
125/62



C106 Semi-Conductive/Insulation/Electrometric Insulation Tri-Layer Heat Shrink Tube

 Heavy Wall Halogen Free Heat Shrink Tube UL Approved 
  Features   	 Heavy wall cross-linked polyolefin 	 Operating temperature: -55~105℃ 	 Thermal melt adhesive liner 	 Shrink temperature: 125 ℃ 	 High resistance to abrasion and impact 	 Shrink ratio: 3:1 	 Halogen free 	 Customized size available. 	  UL approved, UL file no.:354671     Typical application   	 Ideal for insulation,sealing, protection of cable joints,gas pipeline and low voltage electrical wiring 	 Designed to withstand severe mechanical, direct buried installation requirements    Ordering   	 Standard color : Black 	 Special colors (e.g. Red, Clear) are available on request 	 Standard product is adhesive lined, tubes without adhesive are available on request. 	 Standard packaging is 1.22m/pc 	 Please specify specification, color, quantity when ordering    Cross reference   	 Raychem/ Tyco :MWTM /BSTS/ SST-M    Dimensions3:1  
 ReferenceAs&nbsp;supplied(mm)After&nbsp;recovered(mm)Standard&nbsp;length
UPM&nbsp;S3(n) &nbsp;ID&nbsp;min. &nbsp; ID&nbsp;max. &nbsp;WT&nbsp;nom. m 
9/3 &nbsp;9 &nbsp;3 &nbsp;2.6 &nbsp;1.22&nbsp;
12/4 &nbsp;12 &nbsp;4 &nbsp;2.8 &nbsp;1.22&nbsp;
16/5 &nbsp;16 &nbsp;5 &nbsp;3.0 &nbsp;1.22&nbsp;
19/6 &nbsp;19 &nbsp;6 &nbsp;3.0 &nbsp;1.22&nbsp;
22/6 &nbsp;22 &nbsp;6 &nbsp;3.25 &nbsp;1.22&nbsp;
25/8 &nbsp;25 &nbsp;8 &nbsp;3.25 &nbsp;1.22&nbsp;
28/6 &nbsp;28 &nbsp;6 &nbsp;3.25 &nbsp;1.22&nbsp;
33/8 &nbsp;33 &nbsp;8 &nbsp;3.25 &nbsp;1.22&nbsp;
35/12 &nbsp;35 &nbsp;12 &nbsp;3.95 &nbsp;1.22&nbsp;
40/12 &nbsp;40 &nbsp;12 &nbsp;3.95 &nbsp;1.22&nbsp;
45/13 &nbsp;45 &nbsp;13 &nbsp;3.95 &nbsp;1.22&nbsp;
55/16 &nbsp;55 &nbsp;16 &nbsp;4.05 &nbsp;1.22&nbsp;
65/19 &nbsp;65 &nbsp;19 &nbsp;4.05 &nbsp;1.22&nbsp;
75/22 &nbsp;75 &nbsp;22 &nbsp;4.05 &nbsp;1.22&nbsp;
85/25 &nbsp;85 &nbsp;25 &nbsp;4.05 &nbsp;1.22&nbsp;
95/25 &nbsp;95 &nbsp;25 &nbsp;4.05 &nbsp;1.22&nbsp;
105/30 105 30 4.05 1.22&nbsp;
115/34 115 34 4.05 1.22&nbsp;
130/36 130 36 4.05 1.22&nbsp;
140/42 140 42 4.05 1.22&nbsp;
160/50 160 50 4.05 1.22&nbsp;
175/58 175 58 4.05 1.22&nbsp;
200/65 200 65 4.05 1.22&nbsp;
230/75 230 75 4.05 1.22&nbsp;
260/85 260 85 4.05 1.22&nbsp;
350/110 350 110 4.25 1.22

Heavy Wall Halogen Free Heat Shrink Tube for Cable Joint Protection, Sealing

S1(n)-10 Bus bar insulation protective heat shrink tubing Halogen-free and environmentally friendly polyolefin material, can be applied in 6kV to 24kV power switchgear, providing insulation enhancement, protection against flashover or accidental discharge. Especially suitable for switchgear with limited space, it can be used for circular and rectangular copper or aluminum busbars.     DimensionSizeAs supplied (mm)After recovered (mm)Standard length(m)S1(n)-10Inner diameterD (min.)Inner diameterd (max.)Wall thicknesst (nom.)25/1025102.502530/1230122.702040/1640162.702050/2050202.702065/2565252.902075/3075302.902085/3585352.9020100/40100402.9020120/50120502.9020150/60150603.0020175/75175753.0020                            Products SlectionBus Bar Size (mm)Single Layer Bus BarDouble Layer Bus Bar20×3, 25×3Φ25/10Φ30/1230×3, 30×4Φ30/12Φ40/1630×10, 40×4Φ40/16Φ50/2040×10, 50×5, 50×6Φ50/20Φ65/25 (Φ75/30)50×8, 50×10, 60×6, 60×8Φ65/25 (Φ75/30)Φ75/30(Φ85/35)60×10, 80×6, 80×8, 80×10Φ75/30(Φ85/35)Φ100/40(Φ120/50)100×8, 100×10, 100×12Φ100/40(Φ120/50)Φ120/50150×12, 150×15Φ150/60Φ175/75S1(n)-35 Halogen Free Bus Bar Insulation Heat Shrink Tube Halogen-free and environmentally friendly polyolefin material, can be applied in 6kV to 36kV power switchgear, providing insulation enhancement, protection against flashover or accidental discharge. Especially suitable for switchgear with limited space, it can be used for circular and rectangular copper or aluminum busbars.     FeaturesOperating temperature: -40 to 105°CMinimum full recovery temperature: 125°CVoltage class: 6kV to 36kVHalogen-free, RoHS compliantShrink ratio: 2.5:1Standard Color: RedDimensionSizeAs supplied (mm)After recovered (mm)Standard length(m)S1(n)-35Inner diameterD (min.)Inner diameterd (max.)Wall thicknesst (nom.)25/1025103.501530/1230123.601540/1640163.601550/2050203.601565/2565253.601575/3075303.701585/3585353.7015100/40100403.7015120/50120503.8015150/60150603.8015175/75175753.8015  

My Sourcing

Unfollow this supplier?

Unfollow this supplier?