Home Products, Lights & Constructions

Find Home Products, Lights & Constructions from the best B2B online marketplace. Find a reliable Home Products, Lights & Constructions supplier, vendor, manufacturer or distributor to get free quote on HKTDC Sourcing.

Home Products, Lights & Constructions Suppliers and Manufacturers

Lights

home

Find Lights from the best B2B online marketplace. Find a reliable Lights supplier, vendor, manufacturer or distributor to get free quote on HKTDC Sourcing.

Lights Suppliers and Manufacturers

Quanzhou Smarts Electronic & Technology Co Ltd

Model NumberSMT-C12120-EUVTD-PSMT-C24120-EUVTD-POutputRated Power120WRated VoltageDC12VDC24VRated Current10A5AVoltage Tolerance±0.5VVoltage Regulation±0.5%Load Regulation±1%InputVoltage Range200-240VFrequency Range50/60HzEfficiency (Typ.)87%@230VAC89%@230VACTHDTHD&lt;≤20% (@100% load)Power Factor (Typ.)0.99@ 230VAC (full loading)AC Current (Typ.)0.6AInrush Current (Typ.)&lt;20ALeakage Current&lt;0.5mAProtectionShort CircuitHiccup mode, recovers automatically after fault condition is removed.Over LoadingIntelligently reduce the output voltage, auto-recovery or re-power on to recoveryOver Temperature100℃±10℃shut down o/p voltage, automatically recover after cooling.Protection ClassIIEnvironmentWorking Temp.Tcase=-40℃~ +60℃(Please refer to“OUTPUTLOAD vs TEMPERATURE”section)Working Humidity20 ~ 95% RH non-condensingStorage Temp.-40 ~ +90, 10 ~ 95% RHHumidityTemp. Coefficient±0.03%/℃(0～50℃)Vibration10-500Hz,2G 12 minutes/cycle, Period 72 minutes each along X,Y,Z axesSafety &amp; EMCSafety StandardsEN613471, EN61347-2-13Withstand VoltageI/P-O/P:3KVACIsolation ResistanceI/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RHEMSEN61000-3-2; EN61000-3-3; EN61547EMFEN62493-2010OthersIP RatingIP20Weight0.3KgSizeL185xW56xH19mm

ip20 120w 5 in 1 dimming LED Driver Constant Voltage 24v 12v ac dc led transformer

Model NumberSMT-C12048-EUVTD-PSMT-C24048-EUVTD-POutputRated Power48WRated VoltageDC12VDC24VRated Current4A2AVoltage Tolerance±0.5VVoltage Regulation±0.5%Load Regulation±1%InputVoltage Range200-240VFrequency Range47-63HzEfficiency (Typ.)84%@230VAC85%@230VACTHDTHD&lt;≤20% (@100% load)Power Factor (Typ.)0.95@ 230VAC (full loading)AC Current (Typ.)0.25AInrush Current (Typ.)&lt;20ALeakage Current&lt;0.5mAProtectionShort CircuitHiccup mode, recovers automatically after fault condition is removed.Over LoadingIntelligently reduce the output voltage, auto-recovery or re-power on to recoveryOver Temperature100℃±10℃shut down o/p voltage, automatically recover after cooling.Protection ClassIIEnvironmentWorking Temp.Tcase=-40℃~ +60℃(Please refer to“OUTPUTLOAD vs TEMPERATURE”section)Working Humidity20 ~ 95% RH non-condensingStorage Temp.-40 ~ +90, 10 ~ 95% RHHumidityTemp. Coefficient±0.03%/℃(0～50℃)Vibration10-500Hz,2G 12 minutes/cycle, Period 72 minutes each along X,Y,Z axesSafety &amp; EMCSafety StandardsEN613471, EN61347-2-13Withstand VoltageI/P-O/P:3KVACIsolation ResistanceI/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RHEMSEN61000-3-2; EN61000-3-3; EN61547EMFEN62493-2010OthersIP RatingIP20Weight0.2KgSizeL145xW53xH16.5mm

ac to dc 48w led power supply led lighting transformer 3 CCT triac 0-10v dimmable led driver 12v 24v

Mean Well (Hong Kong) Holding Limited

 	 Constant power mode, various dimming functions&nbsp; 	 Voltage (V):180-528 	 Power (W):650 	 Types:Horticulture lighting&nbsp; 	 Model: HVGC-650  

Light Power Supply

Shenzhen MicroNature Innovation Technology Co Ltd

MicroNature MN-D60C PLC-RS485 Data Transmission Unit (DTU)utilizes a high-performance CORTEX chip to achieve simultaneous transmission of medium-speed PLC (Power Line Carrier) and traditional RS485 signals, directly transmitting effective communication data content.  MicroNature MN-D60C PLC-RS485 Data Transmission Unit (DTU)is equipped with a built-in isolated power transformer, allowing it to be used simply by connecting it to the power line.  MicroNature MN-D60C PLC-RS485 Data Transmission Unit (DTU)also provides an isolated DC 12V@150mA power output, which can be used to power low-power sensors or actuators. The wiring and usage are simple.    Features:  1.  Easy Installation: Compact size and flexible installation location.  2.  Bidirectional Communication: Supports bidirectional conversion between power line carrier and 485 protocol.  3.  Stable and Reliable: Local storage for scenes, timing, and linkage strategies.  4.  Strong Scalability: Standard Modbus protocol, compatible with various industrial-grade sensors.  5.  Suitable Scenarios: Municipal road lighting, tunnel lighting, industrial lighting, commercial lighting.                           Electrical Parameters     Power Line 100V~240V (AC) RS485 Rate 115200,8,1, EVEN, half-f-duplex Output Power Supply 12V,150mA (DC) Power Dissipation &lt;= 0.500W Surge Protection 4kV,20kA@8/20uS Isolation &gt;2kV               Shenzhen MicroNature Innovation Technology Co., Ltd.is a national high-tech enterprise specializing in PLC-IoT smart industrial lighting solutions. The company integrates design, research and development, manufacturing, and marketing. We haveleading High Speed Power Line Communication (HPLC) technology, anopen SAAS platform,well-established smart hardware systemandabundant experiencein industrial-grade smart lighting solutions such as Municipal Road lighting, tunnel lighting, and factory lighting...   If you are interested in our products, please feel free to contact us. We look forward to hearing from you.  Thank you for watching.   

MicroNature MN-D60C PLC-RS485 Data Transmission Unit (DTU) For Smart Light Industrial Lighting

Shenzhen GuoYing Optoelectronics Co.,Ltd.

Power: &lt;4W/FT;                     Voltage: 120V;                                                Ra: 90+ ;                                              Luminous Flux@4000K: 292LM;                   IP rating: IP65 PVC extrusion process ;                        Cuttable length:1FT;                     Max Run: 164FT;                         Warranty: 5 years warranty.                               Product features:                        1. Dot free and perfectly homogeneous linear LED light line. 2. Constant current design,overvoltage protection. 3. Do not need transformer box to change AC to DC, connect with line voltage directly. 

Driverless 120VAC COB Tape Light

Shine Glory Enterprise Ltd

   Featured here is a rechargeable LED oil lamp resemblance   The oil lamp resemblance can be used as a table lamp,a handheld lamp or it can be secured on a hook   This oil lamp is powerd by a ni-mn or 1100mA power source and it comes with a transformer   The oil lamp has a power output of 240V ac or 6v DC 800mA  

LED Rechargable Oil Lamp

Extra Lighting Manufacturing Limited

Outlined here is a quality device to be paired with your lighting fixtures. This electronic transformer will work well with 12V halogen lamps. For extended use, it is dimmable with leading edge or trailing edge dimmer.
   Compact and lightweight.   Dimmable with leading edge or trailing edge dimmer.   Promises an extended lifespan.   Operates with high efficiency.   Suitable for 12V halogen lamps.   Quality device to be paired with lighting fixtures.  

Electronic Transformer

Power: &lt;14W/M;                     Voltage: 230V;                                                Ra: 80+,90+ ;                                             Luminous Flux@4000K: 1162LM;                    IP rating: IP65 PVC extrusion process ;                        Cuttable length:10 cm;                     Max Run: 50M(SDCM&lt;5);                        Warranty: 5 years warranty indoor use and 3 years outdoor use.                               Product features:                       1. Dot free and perfectly homogeneous linear LED light line. 2. Constant current design,overvoltage protection. 3. Dimmable:TRIAC dimming(15-90%)        4. Do not need transformer box to change AC to DC, connect with line voltage directly. 

230V COB Tape Light

Model NumberSMT-12100-EUVTD-LPSMT-24100-EUVTD-LPOutputRated Power100WRated VoltageDC12VDC24VRated Current8.33A4.16AVoltage Tolerance±0.5VVoltage Regulation±0.5%Load Regulation±1%InputVoltage Range200-240VFrequency Range47-63HzEfficiency (Typ.)87%@230VAC89%@230VACTHDTHD≤20% (@100% load)Power Factor (Typ.)0.96@ 230VAC (full loading)AC Current (Typ.)0.5AInrush Current (Typ.)&lt;20ALeakage Current&lt;0.5mAProtectionShort CircuitHiccup mode, recovers automatically after fault condition is removed.Over LoadingIntelligently reduce the output voltage, auto-recovery or re-power on to recoveryOver Temperature100℃±10℃shut down o/p voltage, automatically recover after cooling.Protection ClassIIEnvironmentWorking Temp.Tcase=-40℃~ +60℃(Please refer to“OUTPUTLOAD vs TEMPERATURE”section)Working Humidity20 ~ 95% RH non-condensingStorage Temp.-40 ~ +90, 10 ~ 95% RHHumidityTemp. Coefficient±0.03%/℃(0～50℃)Vibration10-500Hz,2G 12 minutes/cycle, Period 72 minutes each along X,Y,Z axesSafety &amp; EMCSafety StandardsEN613471, EN61347-2-13Withstand VoltageI/P-O/P:3KVACIsolation ResistanceI/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RHEMSEN61000-3-2; EN61000-3-3; EN61547EMFEN62493-2010OthersIP RatingIP20Weight0.42KgSizeL334xW31xH22.5mm

200-240vac led transformer ip20 5 in 1 dimming led driver 12v 24v 100w

ModelSMT-DI100W160-DMXP-TCertificateUL/FCC/CE /ClassP/TYPE HL/SELV/ RoHS / Reach/ENEC/ICES/UKCAOutputRated current160mA-1600mADC Voltage24V-93VRated power100WmaxVoltage Tolerance±30mANo-load voltage(Max.)98VmaxLine Regulation&lt;0.1%Load Regulation&lt;0.1%InputVoltage Range100-277VACFrequency Range47 - 63HzPower Factor@ full load≤0.95THD(Typ.) @ full load&lt;10%Efficiency@ full load&gt;88.5%@120VAC 60Hz   &gt;90.5%@230VAC 50HZ   &gt;90.5%@277VAC 60HZNo load power (Max)&lt;3WStandby power(max.)&lt;0.5WAC Current(Max.)&lt;1.33AInrush Current (Typ.)29.6A, 412us@50%Ipeak120V   56.8A, 120us@50%Ipeak230V68.4A, 580us@50%Ipeak277VLeakage current&lt;0.5mAProtectionShort CircuitHiccup mode,restarts automatically after fault condition is removedOver Load≤120%Hiccup mode or Constant power mode, recovers automatically after fault condition is removedOver temperatureAmbient temp. over 55 ±5℃, output current will be reduced to 50%;Ambient temp.Over 45±5℃,recovers automatically after temp. drops.Ambient temp.over 75 ±5℃, output current will be reduced to 0%;Ambient temp.Over 45±5℃,recovers automatically after temp. drops.EnvironmentWorking TEMP-40~+60℃ (see below derating curve) Working Humidity20 -90%RH non-condensing Storage TEM.,Humidity-40 - +80℃,10 - 95% RHTEMP.coefficient±0.03%/℃(0 - 50℃)Vibration10~500Hz, 2G12min./1 cycle,period for 72min. each along X,Y,Z axesSafety &amp; EMCSafety standardsEN61347-1  EN61347-2-13 (EU) &amp; UL8750 (US)Withstand voltageI/P-O/P:3.75KVAC (EU) &amp; I/P-O/P:1.8KVAC (US)Isolation resistanceI/P-O/P:100MΩ/500VDC/25℃/70%RHEMC EmissionEN55015 EN61000-3-2,3 (EU) &amp; FCC Part 15, Subpart B;ANSI C63.4:2014 (US)EMC ImmunityEN61000-4-2,3,4,5,6,11 EN61547 (EU)Lightning surgeDM:2KV CM:4KVStrobe test standardIEEE 1789 flicker-freeOthersNet Weight0.43KGDimension375.8*34.8*24.1mm(L*W*H)Packing32*24.5*355 50pcs /CTNNotes1. All parameters NOT specially mentioned are measured at rated load and 25℃of ambient temperature.2. To extend the driver's using life,please reduce the loading at lower input voltage.3. LEDdriverMeetstheharmonicemissionsrequirementsofANSIC82.77-10.4. Dimming electrical circuit:Notice: This control circuit is isolated,but didn't evaluate Class 2.Please refer to the installation manual to connect the dimmer.CAUTlON: More than one power supply present.ATTENTION: presence de plusieurs alimentations électriques.

Constant Current Plastic case Led Transformer Ip20 100w 1600mA DMX Dimming Led Driver

ModelSMT-DI040W140-CDP-TCertificateUL/FCC/CE /ClassP/TYPE HL/SELV/ RoHS / Reach/ENEC/ICES/UKCAOutputRated current140mA-1400mADC Voltage12-54VDCRated power60WmaxVoltage ToleranceOutput current ± 20mALine Regulation&lt;0.1%Load Regulation&lt;0.1%InputVoltage Range100-277VACFrequency Range50/60HzPower Factor (Typ.)&gt;0.99@120VAC 60Hz  &gt;0.98@230VAC 50HZ  &gt;0.95@277VAC 60HZNo load power (Max)&lt;1.5WStandby power (Max)&lt;0.5WTHD(Typ.) @ full load&lt;11%@120VAC  &lt;9%@230VAC  &lt;10%@277VACEfficiency @ full load&gt;85.4%@120VAC 60Hz  &gt;86.8%@230VAC 50HZ  &gt;86.8%@277VAC 60HZAC Current(Max.)0.5A@100VAC 60HzInrush Current (Typ.)28.8A, 256us@50%Ipeak@120V   55.2A, 130us@50%Ipeak@230V66.5A, 259us@50%Ipeak@277VLeakage current&lt;0.5mAProtectionShort CircuitHiccup mode,recovers automatically after fault condition is removedOvervoltageHiccup or constant power mode,reboots automatically after fault condition is removedOver temperatureAmbient temp. over 50±5℃, output current will be reduced to 50%;Ambient temp.Over 40 ±5℃,recovers automatically.Ambient temp.over 60 ±5℃, output current will be reduced to 0%;Ambient temp.Over 40 ±5℃,recovers automatically.EnvironmentWorking TEMP-40~+45℃ (see below derating curve) Working Humidity20 -90%RH non-condensing Storage TEM.,Humidity-40 - +80℃,10 - 95% RHTEMP.coefficient±0.03%/℃(0 - 50℃)Vibration10~500Hz, 2G12min./1 cycle,period for 72min. each along X,Y,Z axesSafety &amp; EMCSafety standardsEN61347-1  EN61347-2-13(EU) &amp; UL8750 (US)Withstand voltageI/P-O/P:3.75KVACStrobetest standardIEEE 1789 Flicker freeSurge Immunity TestAC Power Line:Differential Mode 2KV,Isolation resistanceI/P-O/P:100MΩ/500VDC/25℃/70%RHEMC EmissionEN55015  EN61000-3-2,3(EU) &amp; FCC Part15 Subpart B; ANSI C63.4:2014(US)OthersNet Weight320gDimension324.7*34.8*24.1mm(L*W*H)Packing340*270*195  50pcs /CTNNotes1. All parameters NOT specially mentioned are measured at rated load and 25℃of ambient temperature.2. To extend the driver's using life,please reduce the loading at lower input voltage.3. LEDdriverMeetstheharmonicemissionsrequirementsofANSIC82.77-10.4. Dimming electrical circuit:Notice: This control circuit is isolated,but didn't evaluate Class 2.Please refer to the installation manual to connect the dimmer.CAUTlON: More than one power supply present.ATTENTION: presence de plusieurs alimentations électriques.

Universal Regulated Switching Power Supply Constant Current Hight Pfc 0-10v 40w 1400mA Dimmable Led Driver

Model NumberSMT-12030-EUVTD-PSMT-24030-EUVTD-POutputRated Power30WRated VoltageDC12VDC24VRated Current2.5A1.25AVoltage Tolerance±0.5VVoltage Regulation±0.5%Load Regulation±1%InputVoltage Range200-240VFrequency Range47-63HzEfficiency (Typ.)80%@230VACPower Factor (Typ.)0.65@ 230VAC (full loading)AC Current (Typ.)0.25AInrush Current (Typ.)&lt;20ALeakage Current&lt;0.5mAProtectionShort CircuitHiccup mode, recovers automatically after fault condition is removed.Over LoadingIntelligently reduce the output voltage, auto-recovery or re-power on to recoveryOver Temperature100℃±10℃shut down o/p voltage, automatically recover after cooling.Protection ClassIIEnvironmentWorking Temp.Tcase=-40℃~ +60℃(Please refer to“OUTPUTLOAD vs TEMPERATURE”section)Working Humidity20 ~ 95% RH non-condensingStorage Temp.-40 ~ +90, 10 ~ 95% RHHumidityTemp. Coefficient±0.03%/℃(0～50℃)Vibration10-500Hz,2G 12 minutes/cycle, Period 72 minutes each along X,Y,Z axesSafety &amp; EMCSafety StandardsEN613471, EN61347-2-13Withstand VoltageI/P-O/P:3KVACIsolation ResistanceI/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RHEMSEN61000-3-2; EN61000-3-3; EN61547EMFEN62493-2010OthersIP RatingIP20Weight0.1KgSize125x45x14.5mm

Cul Ul Certificate Power Supply Christmas Led Lights Electronic Plastic Lighting Transformer 12v 30w Led Driver

Kong Lighting Technology Ltd

High Volt Flexible 2835 LED Strip 220V Without Any AC/DC Transformer

Zhongshan Zhonghong Electrical Appliance Company Ltd.

 This cob LED down light features an aluminum base and a plastic cover for durability. It adopts the Taiwan Epistar chips for high brightness. This novel LED down light promises an over 35,000 hours long lifespan when working with high quality transformers. 
 
  Material: aluminum (base), plastic (cover). 
  Voltage: AC 86-265V. 
  Shape: round. 
  Light source: LED. 
  Certificate: CE and RoHS. 
  Power: 10/20/30W. 
  CRI: 85. 
  Color temp.: 2,650-6,500K. 
  Shipment terms: FOB/CIF. 
  2-year warranty. 
  Efficient heat dissipation and air-cooling. 
  Excellent thermal interface material. 
  No UV, IR radiation, good for health. 
 

LED Down Light

Liteharbor Lighting Technology Co., Ltd

Features: 
   Available in white, black or bronze die-cast aluminum or machined 316 stainless steel. Custom finishes available by special order. Consult factory.   High temperature silicone O-ring provides water tight seal.   Easy re-lamping with lamp cover held by hex locking screw.   Integral knuckle provides 196 degree of vertical aiming and 360 degree of horizontal rotation. Tamper proof hex screw ensures precise aiming.   Lamp cover is sealed with a static O-ring tempered clear glass.   1/2&quot; pipe thread for mounting to junction box (by others) or optional stake mount.   Integral: 18 AWG teflon coated wire 600V 250degree. 5' lead beyond fixture included.   Transformer: for use with 12V AC remote transformer. Not included.   Lamp: 12V MR16 50W 270.   Socket: GU5.3 base.  Finish: 
   Aluminum: die-cast aluminum available in white, black O bronze powder coat. Custom finishes available by special order.  Hardware: 
   Stainless steel tamper-proof screws are flush mounted. Set of alloy keys included with every fixture.  Accessories: 
   LH3: lens cap accommodate accessory holder LH3. Allows the use of up-to (3) 1-5/8&quot; media/color filters. Filters must be ordered separately.   IPV100: directional shield provides 45 degree cutoff. Available in aluminum or stainless steel. Specify at the end of part number.   IPVS6: 6&quot; stake mount accessory available in anodized aluminum or 316 stainless steel. &frac12;&quot; coupling included.  Listing: 
   NRTL listed for wet locations. NRTL listed to US and Canadian standards.  

MR16 & LED Low Voltage Landscape Bullet

Leomay Technology Company Limited

This strip light is made of quality materials for a long service life. It is fitted with a reliable LED light source for excellent illumination. This LED strip light is easy to install and requires little maintenance.
 
  CE certified. 
  High voltage flexible LED strip. 
  Input voltage: 110 or 220V AC. 
  Color: white, warm white, cold white, red, green, blue and yellow. 
  Power: 11.5W per meter. 
  LED type: SMD 5050. 
  LED quantity: 28pc/meter. 
  Length of maximum usage: 100 meters. 
  Package: 50m/roll. 
  Cutting unit: 1 meter. 
  View angle: 120&deg;. 
  IP rating: IP65. 
  Directly contact to 110 or 220V AC without a transformer. 
  The maximum length of SMD 5050 new generation strip could be 100m without pressuring the drawdown. 
  Easy to install. 
  Save cost on the power supply. 
  0.5mm 2  copper wire is more flexible. 
  Eco-friendly transparent PVC, no yellowing in 3 years. 
  24 months longer warranty time. 
  CE and RoHS certified. 
  Widely used for advertising lights, sign lights, architectural decorative lighting, indoor and outdoor decoration lighting. 
 

LED Strip Light

 This is an LED strip light that supports high voltages. With 60 SMD LEDs, this strip light consumes only 4.8W per meter. This eco-friendly strip light offers multiple light colors to create desired effects. 
 
  High voltage. 
  60 SMD3528 LEDs. 
  Flexible&nbsp;strip. 
  Input voltage: 110V or 220V AC. 
  Light&nbsp;color: white, warm white, cold white, red, green, blue and&nbsp;yellow&nbsp;(RGB). 
  Power: 4.8W per meter. 
  LED type: SMD 3528. 
  LED quantity: 60pc/meter. 
  Length of maximum usage: 200 meters without pressure drawdown. 
  Package: 100m/roll. 
  Cutting unit: 1m. 
  View angle: 120&deg;. 
  IP rating: IP65. 
  Directly connect to 110V or 220V AC, no need of transformer. 
  New generation. 
  Easy installation and save cost on power supply. 
  0.5mm2 copper wire with more flexibility. 
  Eco-friendly transparent PVC, no yellowing in 3 years. 
  24-month long warranty. 
  CE and&nbsp;RoHS certified. 
  Widely used in advertising lighting, sign lighting, architectural decorative lighting, indoor and outdoor decoration lighting. 
 

Foshan Nanhai Renying Lamp Accessories Co.,Ltd.

Adaptor

Sealite Co., Ltd.

The lightweight and compact transformers bestow loop-in and loop-out designs with big terminals for easy linking.&nbsp;They come with SAA approval for guaranteed performance. These reliable transformers are&nbsp;suitable for the C-Bus system and also can be used with downlights.
 
  Input voltage: 230V, 50Hz. 
  Input current: 0.27A. 
  Output voltage: 11.6V-eff. 
  Ambient temperature: max. 50&deg;C. 
  Case temperature: max. 85&deg;C. 
  Available in different colors. 
 

Lamp Transformers

This adaptor is finely manufactured for one-phase tracks with three conductors. With a compact yet robust construction, the device is both safe and easy to operate. The adaptor is great for completing any track lighting system. 
   Adaptor for 1-phase 3 conductor tracks.   Compact yet robust construction.   Manufactured with high quality in mind.   Both safe and easy to operate.   Great for completing any track lighting system.  

Adaptor for 3-Wire Track 

Shenzhen Merrytek Technology Co Ltd

This is an innovative and active motion detector with an HF system. This sensor is particularly designed for the lights which have limited spaces. This item is finely designed to ensure easy installation. 	 No shadow. 	 Maximum mounting height: 6m.  

Motion Sensor

HONGKONG JINYI LIGHTING LIMITED

 	 220-240V 50/60Hz 	 For 6-80W LED light 	 3 hours for emergency  

Emergency Power Kit

Kinglumi Co Ltd

This DALI MCU(Microcontroller) with DALI output for dimming of luminaires or transformers with DALI interface. Flush-mounted Rotary Dimmer for DALI DT6 and DT8 Tunable White applications, integrated DALI bus power supply of 92mA which can power DALI bus while connected to AC mains. While not connected to AC mains, the DALI rotary dimmer can be powered by DALI bus. Programmable Minimum Brightness Level Can control and power up to 46 DALI-devices from one dimmer Possible to extend installation with up to 4 dimmers and 100 DALI-devices. Supplied without knob and front frame but compatible with most of the European frames, 5-year warranty. Features Works with both DALI-2 DT6 and DALI DT8 Tc(Tunable White)0.1% -100% dimming range2000K - 10000K color temperature tuning range with DALI DT8Switch-on with last brightness or saved switch-on brightnessSwitch-on brightness can be saved permanently92mA integrated DALI bus power supply when connected to AC mainsEach DALI dimmer can control up to 46 DALI ECGsControl up to 92 DALI ECGs with maximum 2 active DALI dimmers powered by AC mains and 2 passive dimmers powered by DALI busEcoDesign Directive (EU) 2019/2020 compliantFits to European Flush boxesWorking Ta=0°C ~ +50°CFive-year factory guarantee and lifetime technical supportBenefits Less inventory thanks for 2in1 dimming designSupport both Master mode(powered by AC mains), and Slave mode(powered by DALI bus).No extra power supply requestEnergy savings due to standby power&lt;0.30WGreat compatibility with common European dimmer coversConnection Interfaces DALI-2(DA+, DA-)Protection Functions Over currentOver voltageShort circuitOver temperatureApplication For indoor lighting control with DALI compliant ECGs 

Digital Dali 2in1 Rotary Dimmer(DT6, and DT8 Tunable White)

LISUN ELECTRONICS (SHANGHAI) CO., LTD

EMI receiver system is for EMI (Electromagnetic Interference) radiation conduction or conducted emissions testing. The EMI-9KB EMI receiver is made of full closure structure and strong electro-conductibility material, which has high shielding effect. Due to the new technology for theEMI Test System, it solved the instrument self-EMI problem. The test results are according to the international format test report. Standard：CISPR15:2018/GB17743 “Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment”CISPR16-1 “Specification for radio disturbance and immunity measuring apparatus and methods – Part 1-1: Radio disturbance and immunity measuring apparatus – Measuring apparatus”EN55015 “Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment.”EN55022 “Radio disturbance characteristics – Limits and methods of measurement” System Configuration:• EMI-9KC Test System includes: EMI-9KC EMI Receiver built-in Attenuator (9K-1GHz), LISN Artificial Network Power, CDNE-M316 Coupling/Decoupling Network for Emission, Isolation Transformers and cables.• EMI-9KB Test System includes: EMI-9KB EMI Receiver (9K-300MHz), LISN Artificial Network Power, CDNE-M316 Coupling/Decoupling Network for Emission, Isolation Transformers, Attenuator and cables.• EMI-9KA Test System includes: EMI-9KA EMI Receiver (9K-30MHz), LISN Artificial Network Power, Isolation Transformers, Attenuator and cables. Optional instruments to work with the EMI-9KC, EMI-9KB and EMI-9KA EMI receivers:•LISUN LSP-500VARC/LSP-1KVARC Pure Sine Wave AC Power Source for EUT•LISUN SDR-2000B Magnetic Shielding Cabinet for the EMI Receiver System•LISUN VVLA-30M Three Loop Antenna to test 9k-30MHz radiation•LISUN AB-CLP Absorbing Clamp to test the home applications &amp; motor tools•LISUN VOL-CP RF Current Probe to the conducted disturbance voltage Specification:• Detection frequency range: 9kHz~1GHz (EMI-9KC), 9kHz~300MHz (EMI-9KB), 9kHz~30MHz (EMI-9KA)• Frequency stability: 1×10^-6• Frequency resolution: (9kHz~150kHz) 30Hz; (150kHz~30MHz) 1kHz• Test Tolerance: ±2 dB• Measure and Detection method: PK, QP and AV• Measure range: 20dBμV~140dBμV• Frequency scanning step frequency: 20Hz~2MHz• Sweep bandwidth: 200Hz; 9kHz; 120kHz• Connect PC via USB cable and software can run on Win7, Win8, Win10, Win11 

My Sourcing