Home Products, Lights & Constructions

Find Home Products, Lights & Constructions from the best B2B online marketplace. Find a reliable Home Products, Lights & Constructions supplier, vendor, manufacturer or distributor to get free quote on HKTDC Sourcing.

Home Products, Lights & Constructions Suppliers and Manufacturers

Lights

home

Find Lights from the best B2B online marketplace. Find a reliable Lights supplier, vendor, manufacturer or distributor to get free quote on HKTDC Sourcing.

Lights Suppliers and Manufacturers

NINGBO JIANGDONG FORTUNE IMP & EXP CO LTD

LED lamp with Monitor Camera -30W 85-265v   Support APP application 

LED lamp with Monitor Camera 30w

Kong Lighting Technology Ltd

TV Backlight, for 60-65 inch TV/Monitor Backlight,top quality chip 5050 RGB Built-in IC LED Single PixelControl LEDs are used as light sources, which is special customized by Kong Lighting.Programable Dream Flexible USB LED Light Strip with WIFI App Remote controller ,which will give you a more better color changing and interesting life for Gaming Lights, Ambient Lighting Kit.     

TV Backlight Stirp Light Kit Set 5V USB RGB IC Addressable Strip Light

Huizhou Ledsun Lighting Co Ltd

Material: ABS+AluminumBulb: 48W 3000-6500K 800lmSize: 789x230x600mmColor: BlackPatent: ZL202230796483.6 

Wireless charging LED desk lamp monitor lamp for office home

Wanlida Group Co., Limited

This PIR motion sensor wall switch comes with a stylish and streamlined design. It is professionally engineered to deliver reliable and stable performance. This wall switch boasts a long service life.
 
  Sensor: theory optical sensor. 
  Output switching transducer. 
  Color: white and ivory. 
  Sensor PIR + microphones. 
  Neutral line required: no. 
  Voltage: 110-130V/AC, 220-240V/AC and 277V/AC. 
  Warranty: 5 years. 
  Detection range: 1-15m. 
  Certification: ETL and C-ETL. 
  Pattern: 180 degrees. 
  Time setting: 5s-30min. 
  Power frequency: 50/60Hz. 
  Dual-sensor (PIR + sound) switch. 
  Voltage: 120-277VAC. 
  Auto-on/off. 
  Energy-saving: operation. 
  The SK902 uses the passive infrared (PIR) detection technology to monitor a room for occupancy, any movement by a person will cause the detector to register that movement and energize the lighting. 
  After the primary detector PIR engages then the sound detection system comes into operation to keep the status of the detector as &ldquo;occupied&rdquo; even though there is no detectable movement. 
  The lights will remain ON as long as there is a noise or an occupant movement through the sensor zones. 
  A OFF delay time adjustment prevents the lights from switching OFF when the space is occupied. 
  In order to keep the lights ON, noise must be generated, either from talking or any other activity, at least once during the selected OFF delay time interval. 
  An LED indicator blinks to denote activity is sensed in the sensor zones. 
  When the space being monitored by the sensor is unoccupied for the length of time chosen as the OFF delay interval, the unit will switch the lights OFF. 
 

PIR Motion Sensor Wall Switch

Highstar (HK) Industrial Co Ltd

● Energy saving&amp;eye protection; ● Sensor touch for light on/off ● 3 Levels brigntness adjustment ● Three color mode: Nature-cool-warm light With66 pcs LEDs With dimmer function RA≥90 Lumens ≥130lm CCT:3000K,4000k.5000k Lamp rated power: 4.5W Lux ≥500lux (measured from 40cm distance) 

Home Clip Gaming LED Screen  Light Bar,  Monitor clip Lamp

Worbest (Jiangmen) Technology Co.,ltd

When you do computer work at night but do not want to turn on the lights, use this screen light to achive partial lighting. Computer Monitor Light Computer Monitor Lamp Screen Monitor Light Bar USB Reading LED Task Lamp Desk Lamps   Features: Portability Energy conservation High CRI Does not take up desk space POWERVOLTAGECCTCRILUMENSIZE5WDC 5V3000K-6000K&gt;90150LM450*94.8*83.6MM 

Screen Monitor Light Bar LED Desk Lamp

Auroras InnoTech (Guangdong) Co Ltd

SolarWrap Integrated Solar Pole Systems from Auroras are our most advanced and innovative solar modules for various pole-mounted PV applications. SolarWrap’s patented design, manufactured to high-quality standards, can meet decorative and high-end applications, especially for the area and garden lighting without compromising aesthetics. SolarWrap is the outcome of our constant R&amp;D in Solar Lighting, equipped with highly efficient solar modules in a hexagonal aluminum die-cast structure for maximum performance, strength, and durability in many challenging applications. The innovation can be integrated into any pole shape and dimensions, making the SolarWrap Integrated Solar Pole almost universal. The detachable and lightweight design helps in easy installation for a complete maintenance-free life. The complete solar pole only includes two functional components including vertical solar modules and solar light heads which can be connected to each other directly by MC4 connectors. The battery and solar controller are built inside of the light fixture. The powers of solar light heads are from 20W to 120W to meet most requirements of projects. The vertical solar-led street light pole is a premium and advanced product. It is designed especially for these projects concerning a lot on aesthetical appearance with high luminous flux, durable quality system, and long time use without any maintenance. It could be widely used for outdoor monitors, traffic lights, signal centers etc. It is also an ideal solution to retrofit the traditional street lights whose lighting bulbs are metal-halide. It only needs to attach the SolarWrap vertical solar module to existing poles without setting new poles. This provides a brand new possibility to save energy by solar power for traditional street lights with minimum cost. 

Vertical Solar LED Street Light

● Energy saving&amp;eye protection; ● Sensor touch for light on/off ● Stepless dimmer ● Three color mode: Nature-cool-warm light With66 pcs LEDs lifetime: 30000 hours With dimmer function RA≥95 max illuminous flux≥ 200lm CCT:3000K,4000k.5000k Lamp rated power: 4.5W Max illuminance ≥500lux (measured from 40cm distance) Unit size: 46*10.5*5.3cm 

Monitor screen clip lamp,PC screen light

Zhejiang Fonda Technology Co Ltd

- PLC, Zigbee, LoRa Mesh communication - LCD display. - High-performance 32-bit ARM9 MCU. - Embedded Linux OS platform. - With 10/100M Ethernet interface, RS485 interface, USB interface. - It supports GPRS/4G and Ethernet communication mode. - Firmware upgrading: online, cable and local USB disk. - Built-in smart meter: remotely data reading (including external meter). - Built-in PLC communication module. - Built-in RTC, support local scheduled task. - Built-in 4 DO, 8 DI (6DC IN+2AC IN). - Optional configuration: GPS. - Fully sealed enclosure: anti-interference, withstand high voltage, lightning and high frequency signal interference. -  MOQ: 1 

Smart Street Light Concentrator

CUPOWER EUROPE GMBH

The CUPOWER LINEAR NON-SELV Wireless LED Driver Series is a non-isolated, adjustable power solution designed for a wide range of Class I luminaires. Available in 36W, 75W, and 100W models, each driver offers NFC programmability for easy current adjustments, ensuring maximum flexibility for various lighting applications. With Constant Lumen Output (CLO), these drivers maintain consistent light quality over time by compensating for LED degradation, ensuring long-lasting, high-performance illumination. The i-Data function provides advanced lighting control and monitoring, while the integrated DC emergency feature ensures reliable lighting in critical scenarios. This series is designed with flicker-free dimming (ranging from 1% to 100%) for smooth and comfortable lighting control, making it ideal for applications requiring precision lighting. The anti-glow function prevents unwanted light glow when powered off, ensuring complete darkness when required. Each model supports packing unit programming, enabling multiple drivers to be configured in parallel via NFC for large-scale installations. With a compact design and 5-year warranty, the LINEAR NON-SELV Wireless LED Driver Series offers reliability, advanced functionality, and easy configuration for both commercial and residential lighting systems. All parameters are displayed in the specification table for detailed reference.  Specification Table ModelOutput Current (mA)Max Output Power (W)Input Voltage (V)Product Dimensions (mm)ID ELNCB 36/230/050-400 BH16 NFC CS50-40036W230V278 x 30 x 16ID ELNCB 75/230/050-400 BH16 NFC CS50-40075W230V278 x 30 x 16ID ELNCB 100/230/200-700 BH16 NFC CS200-700100W230V360 x 30 x 16 

LINEAR NON-SELV Wireless LED Driver Series, 36W-100W, 50-700mA, NFC Programmable, Flicker-Free, Constant Lumen Output, DC Emergency, for Class I Luminaires

Shenzhen MicroNature Innovation Technology Co Ltd

A lamp controller linked with an LED driver, communicates byHigh-Speed Power Line Communication (HPLC). Remotely turn ON/OFF, dimming (0-10V/PWM), data collection, 90-260VAC, 2W, IP66, lightning protection.  Features:- Industrial-grade Quality:Aluminum alloy shell, compact in size, with an IP66 protection rating, and the maximum load is 400W. - Remote Control:Built-in PLC Communication Module, supporting remote switching, dimming (0-10V / PWM), configuration, and OTA upgrades. - Failure Detection &amp; Safety Protection:Supports active protection functions such as overcurrent and overload and can actively provide warnings and report faults. - Precise Measurement:Precise data collecting such as current, voltage, power, energy consumption, and temperature, with an error rate of less than 2‰. - Application Scenarios:Municipal Road lighting, tunnel lighting, and industrial lighting.   The MC-1P Single Light Controller adopts broadband power line communication technology, which uses the existing power lines to realize communication without additional wiring, and reduces the construction cost. The communication speed is fast, and the peak rate at the physical layer can reach 0.507Mbit/s.   MC-1P single light controller uses power line communication to collect data and report input current, voltage, active power, energy, power factor, temperature, on/off light status and so on. It uses Orthogonal Frequency Division Multiplexing (OFDM) modulation technology with strong anti-interference ability. Automatic fast networking is supported. A maximum of 15 level trunks are supported over a long distance.   Key Parameters: * Communication based on PLC (Power Line Carrier Communication) * Dimming: PWM / 0~10V * Operating voltage: 90-260VAC * Frequency: 50-60Hz * Static power: &lt; 2W * Output current: 0-8A±2% * Load power rating: ≤400W * Operating temperature: -40°C~+85°C * Industrial packaging protection: IP66     PLC Single Light Controller can be used with gateway/traditional power supply/streetlight to achieve the role of remote monitoring, control and management of the street lighting network, and ultimately achieve the purpose ofenergy saving,cost reductionandefficiency increase.               N/A DALI KNX Bus RS-485 PLC-IoT Communication Medium TP TP TP Power Line Point-to-point Communication Distance 0.1 km 1 km 1 km 2km Mesh Networking NO NO NO Support Network Node Scale 64 200 32 500 Deployment Cost Requires Rewiring   High Cost Requires Rewiring   High Cost Requires Rewiring   High Cost No Additional Rewiring Economical Maintenance Difficult Difficult Difficult Easy 

HPLC Single Light Controller Dimming (0-10V/PWM), data collection, 90-260VAC, IP66

Products Description:  A lamp controller linked with an LED driver, communicates byHigh-Speed Power Line Communication (HPLC). Remotely turn ON/OFF, dimming(0-10V/PWM), data collection, 85-265VAC, 1-3W, IP66, lightning protection.  Features:  - Industrial-grade Quality:Aluminum alloy shell, compact in size, with an IP66 protection rating, and the maximum load ofsingle-channel is 800W. - Dual-channel control:Each channel can be independently controlled for power driving and data collection.  - Remote Control:Built-in PLC Communication Module, supporting remote switching, dimming (0-10V / PWM), configuration, and OTA upgrades. - Failure Detection &amp; Safety Protection:Supports active protection functions such as overcurrent and overload and can actively provide warnings and report faults. - Precise Measurement:Precise data collecting such as current, voltage, power, energy consumption, and temperature, with an error rate of less than 2‰. - Application Scenarios:Municipal Road lighting, tunnel lighting, and industrial lighting.   The MC-2P Dual Light Controller adopts broadband power line communication technology, which uses the existing power lines to realize communicationwithout additional wiringand reduces the construction cost. The communication speed is fast, and the peak rate at the physical layer can reach0.507Mbit/s.  MC-2P Dual light controller uses power line communication to collect data and report input current, voltage, active power, energy, power factor, temperature, on/off light status and so on. It uses Orthogonal Frequency Division Multiplexing (OFDM) modulation technology withstrong anti-interference ability. Automatic fast networking is supported. A maximum of15level trunks are supported over a long distance.   Key Parameters:  ·Communication based on PLC ·Dimming: PWM / 0~10V  ·Operating voltage: 85V-265VAC ·Overall power consumption: 1-3W ·Single-channel output current: 0-10A±2% Dual-channel output current: 0-20A±2% ·Single Load power rating: ≤800W Dual Load power rating: ≤1600W  ·Operating temperature: -40°C~+85°C  ·Industrial packaging protection: IP66   PLC Dual Light Controller can be used with gateway/traditional power supply/streetlight to achieve the role of remote monitoring, control and management of the street lighting network, and ultimately achieve the purpose ofenergy saving/cost reductionandefficiency increase.                N/A DALI KNX Bus RS-485 PLC-IoT Communication Medium TP TP TP Power Line Point-to-point Communication Distance 0.1 km 1 km 1 km 2km Mesh Networking NO NO NO Support Network Node Scale 64 200 32 500 Deployment Cost Requires Rewiring   High Cost Requires Rewiring   High Cost Requires Rewiring   High Cost No Additional Wiring Economical Maintenance Difficult Difficult Difficult Easy    

PLC Dual Light Controller, Dimming(0-10V/PWM), data collection, 85-265VAC, IP66

HONGKONG JINYI LIGHTING LIMITED

Product FeaturesDual Configurations: Split-Type: External emergency power unit (integrated inverter and battery) for recessed mounting. Integrated-Type: All-in-one design with internal inverter and battery for surface mounting.Lens Options: Round Lens: Uniform light for open areas. Elliptical Lens: Focused beam for corridors.High-Performance Battery: LiFePO4 battery, 2000–4000 cycles, eco-friendly. Safety &amp; Compliance: CE, RoHS certified; V-0 PC flame-retardant material. Self-Test Feature: Automatic diagnostics with LED status indicators.Performance DescriptionLighting Duration: ≥3 hours in emergencies, per BS EN 1838:2013. Efficiency: Low power use with LED and LiFePO4 technology. Temperature Range: Reliable from 0°C to 40°C, with excellent thermal stability. Self-Discharge: &lt;1%/month, ideal for standby use. Durability: IP20 standard, upgradable to IP65 with waterproof box.InstallationSplit-Type: Recessed with ceiling cutout; external unit wired separately. Integrated-Type: Surface-mounted via screws, fully contained. Lens Selection: Interchangeable lenses fitted on-site. Wiring: Supports maintained/non-maintained modes; professional installation advised.Application ScopeOpen Areas (Round Lens): Hotel lobbies, shops, offices. Corridors (Elliptical Lens): Hotel hallways, stairwells, escape routes. Versatility: Indoor (IP20) like schools; outdoor (IP65) like entrances. Target Markets: Europe, Middle East, with CE/RoHS compliance.MaintenanceSelf-Test Monitoring: Automatic diagnostics reduce manual testing needs; monthly 30-second and annual 90-minute tests are recommended to comply with NFPA 101 or local regulations, with faults indicated via LED signals. Battery Longevity: LiFePO4 battery requires replacement every 5–10 years, depending on usage, far outlasting traditional batteries (e.g., NiCd’s 3–5 years), with easy access in split-type models. Cleaning: Wipe the lens and housing with a dry or damp cloth to maintain light output; avoid harsh chemicals to preserve the V-0 PC material integrity. Periodic Inspection: Check wiring and mounting stability annually to ensure continued performance, especially in high-traffic or dusty environments.Competitive EdgeVs. Market: Dual designs and lens options outshine single-type competitors (e.g., LightHub); V-0 PC and LiFePO4 exceed NiCd-based models (e.g., Clevertronics). User Benefits: Self-test reduces costs; versatile installation suits diverse needs.  

Emergency Downlight with lens

Zhejiang Topmb Electrical Lighting Co Ltd

LED Screen lamp , PROFESSIONAL ANTI- GLARE, LIGHT DEGREE 45° ,LAMP BAR IN 40CM,HAVE PATENT. Mini remote control INPUT 100-240VAC LED 5W 255LM RA&gt;95, PF&gt;0.5 Lux:30cm:900Lux/40cm:700Lux Stepless Dimmable+CCT light change with 2Hours Echo timer , light Sensor function and memory function with 5V 1A USB cable  No apdator include  Color: BLACK/WHITE 

PHX007 Smart led monitor lamp  with remote

● Energy saving&amp;eye protection; ● Sensor touch for light on/off ● Stepless dimmer ●Timer (40mins) ● Three color mode: Nature-cool-warm light ●Optical light sensor With 40 pcs LEDs With dimmer function RA≥80 Lumens ≥150lm CCT:2700-6500K Lamp rated power: 4W Lux ≥350lux (measured from 35cm distance) 

Gaming laptop clip lamp, monitor clip light bar

Computer Screen Lamp 

- PLC, Zigbee, NB-IoT, LoRaWAN, LoRa Mesh, LTE, Solar - Standard NEMA 7-PIN interface. - Remotely turn ON/OFF, built-in 16A relay. - Photocell auto control. - It supports dimming interface: DALI and 0-10V. - It supports remote reading of electricity data: current, voltage, power, power factor and consumed energy. - It supports recording total energy consumed and resetting. - Lamp failure detection and automatic reporting to the server. - Optional module: GPS, tilt and RTC. - Lightning protection. -MOQ: 1 

Smart Street Light Lamp Controller NEMA

 	 LCD display 	 High-performance 32-bit ARM9 MCU; 	 Embedded Linux OS platform; 	 With 10/100M Ethernet interface, RS485 interface, USB interface; 	 Support GPRS/4G and Ethernet communication mode； 	 Firmware upgrading: online, cable and local USB disk; 	 Built-in smart meter: remotely data reading (including external meter); 	 Built-in PLC communication module; 	 Built-in 4 DO、8 DI (6DC IN+2AC IN); 	 Built-in RTC, support local scheduled task; 	 Optional configuration: GPS; 	 Fully sealed enclosure: anti-interference, withstand high voltage, lightning and high frequency signal interference;  

Street Lighting Control Data Concentrator

 	 1.Zigbee wireless communication, automatic MESH function; 	 2.Remote switch on/off, maximum internal 10A relay outputs; 	 3.With DALI dimming output interface, 20mA current limit control; 	 4.With current, voltage, power, power factor, power remote reading functions; 	 5.With energy accumulation, remote cleaning function; 	 6.With LED lamp failure detection function; 	 7.With active fault information reporting functions; 	 8.Lightning protection function; 	 10.With 40mm height, suitable for LED manufacturers.  

Smart Wireless Street Lighting Lamp Controller Zigbee

Smart Street Lighting Lamp Controller Zigbee box type

1. LoRa wireless communication, support LoRaWan standard.
2. Remote switch on/off, maximum internal 16A relay outputs.
3. With PWM, 0-10V and DALI dimming output interface.
4. 0-10V and Dali dimming using same line, switched by software.
5. With current, voltage, power, power factor, power remote reading functions.
6. With energy accumulation, remote cleaning function.
7. With LED lamp failure detection function.
8. With active fault information reporting functions.
9.&nbsp;IP67,Frequency range:470MHz,Protocol standard:LoRaWan,Communication mode:CLASS-C.

Street Lighting Lamp Controller LoRa  Embedded

 	 PLC transmission 	 Standard NEMA 7-PIN interface, plug and play； 	 Remotely turn ON/OFF, built-in 16A relay; 	 Support dimming interface: 0-10V(default) and PWM (customizable); 	 Remotely read electrical parameters: current, voltage, power, power factor and consumed energy; 	 Support recording total energy consumed and resetting. 	 Lamp failure detection: LED and HID lamp; 	 HID power failure and compensation capacitor failure; 	 Automatically report failure notification to server; 	 Automatically locate its father node(RTU); 	 Lightning protection; 	 Waterproof: IP65;  

Street Lighting Lamp Controller PLC NEMA

1. Built-in NB-IoT communication module.
2. Standard NEMA interface, easy to install.
3. Remote switch on/off, maximum 16A relay outputs with dimming interface: 0-10V(PWM can be customized).
4, NEMA standard with 5PIN interface with current, voltage, power, power factor, power remote reading functions.
5. With energy accumulation, remote cleaning function.
6. With LED lamp failure detection function.
7. With active fault information reporting functions.
8.&nbsp;IP65,Frequency range:50-60Hz,Frequency:900MHz.​
9. Lightning protection.

Street Lighting Lamp Controller NB IoT NEMA 

Shenzhen Carvan Electronics Co., Ltd.

 	 13.3INCH ANDROID ROOF MOUNT MONITOR WITH FM USB HDMI BT 	 13.3 inch HD LED Roof-mount Monitor with Android System, 6.0 O.S System: PAL/NTSC​ 	 With IPS Panel 	 Panel Pixel:1920(W)*3(RGB)*1080(H)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 	 1 way video input, 1 way audio output&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 	 Built-in USB/TF Card reader, support 1080P video decoding 	 With built-in bluetooth for BT Headphone 	 Built in FM Transmitter&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 	 With HDMI input 	 With built-in dual speakers and roof light&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 	 Power supply: DC 12V 	 3 colors available: Beige, Black, Grey  

My Sourcing