Maternity Supplies

Rondish Co Ltd

  Protektor&nbsp;II   is a powerful wireless nurse call system. It works with    Zone Protektor    to create a powerful &amp; versatile wireless network. This is achieved by using different frequencies to send the signal long range to the Care Station, allowing low cost and long battery life of the local cell transmitters, while maximizing the system coverage.

A facility consisting of multiple floors, or small campus of buildings, can be covered in a single wireless system.

The&nbsp;   Care Station    displays all alarms on a clear 2x20 English character display showing the calling ID &amp; type of alarm, such as toilet button, bed pad, door alarm and so on.&nbsp;In case of mobile alarms such as wristband transmitter, it shows the nearest zone to indicate where the caller is located.&nbsp;Couple with POCSAG transmitter, the signal can be&nbsp;broadcast&nbsp;to caregiver pagers and LED display.

Protektor II - Wireless Nurse Call System

  Cordless Expander With Interchangeable Plug (CMEX-21)  
The&nbsp;CMEX-21&nbsp;is an multiport interface unit that plugs into the bed head of many common nurse call systems making them able to carry&nbsp;up&nbsp;to 5 wireless fall-prevention sensors and nurse call points.&nbsp;The CMEX-21 comes with a separate cable with plug because there will be&nbsp;some cases where&nbsp;6.3mm (1/4&quot;) plug connection may not fit the existing nurse call system socket.&nbsp;The&nbsp;interchangeable cable plug design allows the flexibility to change the connector types that used by nurse call providers.&nbsp; &nbsp;&nbsp;

  Features :   	 Interchangeable cable plug (NC-03) allows the flexibility for different connector types nurse call systems 	 433MHz receiver&nbsp;allows use of floor mats, bed / chair pad, call cord, wristband transmitter, bathroom alarm, motion sensor &amp; door alarm, up to 5 wireless devices 	 1 x 6.3mm (&frac14;&rdquo;) mono mic jack port for&nbsp;call cord 	 1 x RJ10 port for wired floor mat&nbsp; 	 Cord removal alert (with on/off switch to disable this function) 	 Compatible with normally open or normally closed systems 	 LEDs to indicate the alarm status &amp; error types 	 Button on the top for clearing alarm or pause function under no alarm condition 	 Pause function allows patient removal from bed 	 3 x AAA batteries or 5V DC adapter 	 A hanger clip &amp; a wall mount brcket is included  

Expander - Nurse Call Splitter for Cordless Devices

TFE HK Ltd

Featured here is an anti-tamper dual alarm that can be reset and suspended by infrared remote control. The rubberized housing offers protection against damage caused by dropping onto hard floors. A versatile mounting base and hanger are included for convenient attachment.
   Versions for pull cord operation or with optional sensor pads.   Nurse-call versions will connect to other systems for remote alarm signaling.   &quot;Suspend&quot; mode allows patient repositioning with adjustable stand-by time.   &quot;Reset&quot; mode puts the alarm into stand-by situation until re-activation by next use.   2 alarm sounds and low or high volume settings.   &quot;Silent&quot; mode for use with remote alarm signaling nurse-call systems.   4-digit ID code to match remote control to alarm and eliminate interference.   Easy cleaning of pull cord.  

Nursecall Anti Tamper Dual Alarm

 The anti-tamper car alarm is equipped with a rubberized housing for protection against damage caused by dropping onto hard floors. The compact design allows efficient use of space. The &quot;suspend&quot; mode allows patient repositioning with adjustable stand-by time.  	 Versions for sensor pads only. 	 Tamper-free resetting and suspension by infrared remote control. 	 Nurse-call versions will connect to other systems for remote alarm signaling. 	 &quot;Reset&quot; mode puts the alarm into stand-by situation until re-activation by next use. 	 2 alarm sounds and low or high volume settings. 	 &quot;Silent&quot; mode for use with remote alarm signaling nurse-call systems. 	 4-digit ID code to match remote control to alarm and eliminate interference. 	 Easy cleaning of pull cord. 	 Versatile mounting bass and hanger included.  

Anti-Tamper Care Alarm

Venture Global Ltd

Enhanced Safety: Detects when a patient turns or gets out of bed, ensuring timely assistance and reducing injury risk.Faster response: Allows the caregiver to quickly respond to emergencies, minimising risks.Seamless integration: Connects easily to nurse call systems for compatibility in hospitals and home care

Bed-Side Alert Transmitter 

The anti-tamper care alarm allows&nbsp;tampering free resetting and suspension by the infrared remote control. The nurse call versions will connect to other systems for remote alarm (included) signaling. The suspending mode allows patient repositioning with the adjustable standby time. 	 Approval: medical device Class 1. 	 Versions for magnetic pull cord operation or with optional sensor mats. 	 Resetting mode puts the alarm into standby until reactivated by next use. 	 2 alarm sounds &amp; low or high volume settings. 	 Silent mode for use with remote alarm signaling nurse call systems. 	 4 digit ID code to match remote control to alarm and elimination interference. 	 Rubberized housing for protection against damage caused by dropping on hard floors. 	 Versatile mounting base and hanger are included. 	 Easy cleaning of the pull cord. 	 Uses 4 x AA batteries (not included) or optional mains adaptor.  

Anti Tamper Care Alarm with Nursecall Jack

  LED Indicator Light   are the nurse call system&rsquo;s basic device for visually signaling the patient calls to medical personnel in corridors. It is mounted above (or next to) the doorway of each patient room or installed at corridor intersections to denote a zone of rooms, the indicator light will produce a bright light and tone that is easily seen and heard both at great distances. As a result, nurses and staff members are quickly directed to the source of a call.&nbsp;

  Features :   	 Dual colored (Red &amp; White) light indication&nbsp; 	 Distinctive appearance &amp; sound, no confuse with fire alarm 	 Adjustable volume 	 Re-transmit wireless signal to extend range to pager or central monitor unit 	 Night light option to illuminate path to toilet 	 Memory for up to 15 wireless devices 	 Battery back-up in case of power loss 	 Low battery indication  

Indicator Light

  BedWatcher&trade;   is an economic bed monitoring system alerts caregiver to help prevent potential fall. It detects and alerts caregiver when a frail &amp; vulnerable patient / elderly rises or moves off the pad.

  Wired Monitor   	 Pause mode gives caregiver 3 mins to re-position the patient without triggering the alarm 	 Low battery / input lost / change pad indications 	 Choice of tones &amp; volume 	 Delay settings 0, 2s &amp; 15 mins 	 Reset button on monitor face 	 Tamper proof caregiver key reset option 	 Port to connect with nurse call system 	 Works with wide range of sensor pads e.g. standard bed / chair pads, floor mats, timed pads &amp; wetness pads.    Standard Sensor Bed Pad   	 USB break-cable to protect monitor 	 Anti-bacterial surface 	 Care instructions printed on the pad 	 The pad is sealed for incontinence protection  

BedWatcher™ - Wired

The voice alert offers a choice of the high volume, low volume or silence mode with flashing light. It allows you to record your own alert messages or instructions with a voice that is familiar to the patient. This piece also enables a caregiver to receive a remote alarm signal if it is connected to an existing nurse call system via a 6.3mm mono jack.   Bed, wheelchair or entrance alarm with voice function.   The alert is activated by the magnetic switch with cord and clip or optional sensor pads via the RJ9 socket.   Dual use with sensor pad option to alarm when the pad is either stepped on or off.   Tampering resistant suspending mode: stop monitoring temporarily to facilitate patient repositioning without triggering an alarm.   Battery low indicator to ensure uninterrupted patient monitoring.   Versatile clip and mounting bracket are included.  

Nursecall Voice Alert

GUARDMAN® Fall Management Monitoring Kit provides an early alert signal to the caregivers or family members living together with the elderly if she / he has potential risks to fall down when gets up from the bed.  - Each set includes 1 pc each of wireless fall monitoring alarm transmitter, bed sensor pad, call button and wireless portable vibrating receiver. The whole alarm set is simple DIY and user friendly to set up. It’s possible to add other GUARDMAN® sensors / transmitters to expand the system. - SUB-1G RF frequency with wireless transmission range up to 300m / 1,000ft (direct line of sight)  Wireless Fall Monitoring Alarm (Transmitter) - Plugs with a Bed sensor pad to transmit a wireless signal to the receiver and triggers an alert sound and flashing light if elderly leaves the bed. Connects with nurse call button can expand the fall monitoring alarm to be a set of wireless alert system. - IP 3X Water splash-proof design - Individual button to control each function includes Power On/Off, Transmission, Flashlight, Siren Alarm - 3 operation modes for sensor pad - Mat/Pad/+3S (i) Mat: alarm being trigger when pressure on (someone step on the mat) (ii) Pad: alarm being trigger when without pressure (leave the sensor pad) (iii) +3: alarm being trigger when without pressure, but delay 3 seconds for reduce false alarm Bed Sensor Pad 30” x 20” - Easy to use, simply plug into the Wireless Fall Monitoring Alarm, no need to setup and install battery - Slip-resistant and non-skin sensitive Universal Nurse Call Button - Simply plug into the Wireless Fall Monitoring Alarm to become a call button - Temper-resistant design Vibrating Pager (Receiver) - Capability to pair up-to 4 different GUARDMAN® sensors / transmitters - With LED indicator icon for each zone / channel - Clear and loud sound with 18 melodies for selection - 3 selectable operating modes: sound / vibrating / sound &amp; vibrating - With built-in belt clip 

Fall Management Monitoring Kit

GUARDMAN® Fall Management Monitoring Kit provides an early alert signal to the caregivers or family members living together with the elderly if she / he has potential risks to fall down when stands up from the chair.  - Each set includes 1 pc each of wireless fall monitoring alarm transmitter, chair sensor pad, call button and wireless portable vibrating receiver. The whole alarm set is simple DIY and user friendly to set up. It’s possible to add other GUARDMAN® sensors / transmitters to expand the system. - SUB-1G RF frequency with wireless transmission range up to 300m / 1,000ft (direct line of sight)  Wireless Fall Monitoring Alarm (Transmitter) - Plugs with a Chair sensor pad to transmit a wireless signal to the receiver and triggers an alert sound and flashing light if elderly leaves the chair. Connects with nurse call button can expand the fall monitoring alarm to be a set of wireless alarm system. - Can be hanged to the wheelchair - Water splash-proof design - Individual button to control each function includes Power On/Off, Transmission, Flashlight, Siren Alarm - 3 operation modes for sensor pad - Mat/Pad/+3S (i) Mat: alarm being trigger when pressure on (someone step on the mat) (ii) Pad: alarm being trigger when without pressure (leave the sensor pad) (iii) +3: alarm being trigger when without pressure, but delay 3 seconds for reduce false alarm Chair Sensor Pad 15” x 10” - Easy to use, simply plug into the Wireless Fall Monitoring Alarm, no need to setup and install battery - Slip-resistant and non-skin sensitive Universal Nurse Call Button - Simply plug into the Wireless Fall Monitoring Alarm to become a call button - Temper-resistant design Vibrating Pager (Receiver) - Capability to pair up-to 4 different GUARDMAN® sensors / transmitters - With LED indicator icon for each zone / channel - Clear and loud sound with 18 melodies for selection - 3 selectable operating modes: sound / vibrating / sound &amp; vibrating - With built-in belt clip 

Fall Management Monitoring System

  BedWatcher&trade;- CordFree  &nbsp;is a cordless bed monitoring system alerts caregiver to help prevent potential fall. It detects and alerts caregiver when a frail &amp; vulnerable patient / elderly rises or moves off the pad.

  CordFree Monitor​ (Cordless)   	 Unique sleep mode allows caregiver to deactivate the alarm if bed occupant does not require fall management 	 Pause mode gives caregiver 3 mins to re-position the patient without triggering the alarm 	 Low battery / input lost / change pad indications 	 Choice of tones &amp; volume 	 Delay settings 0, 2s &amp; 15 mins 	 Reset button on monitor face 	 Tamper proof caregiver key reset option 	 Port to connect with nurse call system 	 Works with numerous wireless sensor devices including bed / chair pads, floor mats, wristband &amp; motion sensors.    Cordless Sensor Bed Pad   	 Couple with our cordless transmitter (TM-01), no cable required between pad &amp; monitor 	 Trigger alarm when patient exits bed 	 Anti-bacterial surface 	 Care instructions printed on the pad 	 The pad is sealed for incontinence protection  

BedWatcher™ - CordFree

  Wireless 5-In-1 Call Point  
It has five buttons, corresponding to Normal call, Emergency call, Nurse presence, Guard presence &amp; Reset. It allows caregiver to identify suitable reaction efficiently.&nbsp;

  Features : &nbsp;  	 Red for normal call / Yellow for emergency / Grey for nurse presence / Blue for guard presence / Green for reset&nbsp; 	 Reassurance LED 	 Input for nurse call handset, RJ12 connection 	 Input for wired bed pad / floor mat, RJ10 connection 	 Comes with removable pull cord 	 Tamper proof caregiver key reset option  

Wireless Nurse Call Button

Contin Technology Ltd

Medical Call Center (MCC) is a light and portable monitoring unit for fall alarms.  Features: Receive wireless signals from up to Warmcare sensor pad (chair/ bed)Alarm tone/ volume available for selection.

Wireless Monitor

Medical Call Center (MCC) is a powerful yet easy to use all-in-one lite version monitoring unit.

Features: 	 Receive wireless signals from up to 8 Warmcare&#39;s devices 	 LCD monitor display different alert icon 	 Assist caregivers with alerts identifying specific source of alarm on the system.  

Wireless Medical Call Center (Multiple Connection & Pair with CMU Touch)

Provide Patients The Best Comfort INTELLIGENTSENSOR BED PAD can adjust itself to work under different mattresses  The InvisaPad is discreetly placed under the mattress, making it non-intrusive and comfortable. It works with most mattress types and sizes, seamlessly integrating into your existing bed setup without compromising your comfort. This can be especially useful for those who have a tendency to wander.   32" x 9.5" (81 x 24cm) Foldable design, reduce your transportation cost Cordless solution with built-in control box Works underneath the mattress, invisible to patient Auto calibration technology, zero up the weight of a mattress Optional Early-Alert feature. It can be enabled inside of the control unit 12-mth warranty Patents  

InvisaPad - Patent Fall prevention bed pad under mattress

Unique design adopted on the call button and central monitoring unit interface allows the monitor unit to manage all emergency signal of the user. It helps to notify the caregivers and allow them to manage multiple users at the same time.  Features: New generation powerful performanceDetailed alarm and history informationDistance device monitoringImpressive case designFlexible combination

Intelligent Call Bell System

Medical Call Center (MCC) is a powerful yet easy to use all-in-one lite version monitoring unit.  Features: Connected to Warmcare sensor pad for fall managementDifferent tone/ volume selection

 Wired Monitor

Wireless Bedside Call Point With Handset Wireless Call &amp; Reset 2-in-1 unit allows patients in health care settings to alert a nurse remotely of their need for help.  WCP-11c Red for normal call, Green for resetCompletely wireless, hassle-free installationLED call reassurance indicatorLow battery alertReplaceable battery4P4C connection for nurse call handset [NEC-12(M)]NEC-12 (M) Easy to press big red call buttonLED call reassurance indicatorStandard cable with USB break point and 4P4C connectorComes with wall-mounted bracket Certified with FCC, CE ISO 13485:2016 ISO 9001:2015    

Wireless Bedside Call Point W/ Handset

Features:
- Bed, wheelchair or entrance alarm with voice function.
- Choice of High / Low volume or silence mode with flashing light.
- Record your own alert message or instructions in a voice that is familiar to
&nbsp;&nbsp; the patient.
- Alert activated by the magnetic switch with cord and clip or optional sensor&nbsp;
&nbsp;&nbsp; pads via the RJ9 socket.
- Dual use with sensor pad option to alarm when the pad is either stepped on
&nbsp;&nbsp; or off.
- Enables caregivers to receive a remote alarm signal if connected to an
&nbsp; existing Nursecall system via the 6.3mm mono jack.
- Tamper Resistant Suspend Mode will stop monitoring temporarily to facilitate
&nbsp;&nbsp; patient repositioning without triggering an alarm.
- Battery low indicator to ensure uninterrupted patient monitoring.
- Versatile clip and mounting bracket included. &nbsp;
&nbsp;

Voice Alert with Nurse Call Jack

Wireless Portable Nurse Call Handset Best fit for a surge in bedding needs. NEC-05 M Easy to press big yellow call buttonGrey button to resetLED call reassurance indicatorBattery operated, (2 x AAA)Comes with lanyard clip and plastic wall-mounted bracketPortable to use at anywhere within the detected areaBatteries Frequency Range Tracking Size Weight433.92MHz100m (line-of-sight) 20min   115 x 42 x 25mm85g (without batteries)   

Portable Nurse Call Handset (Wireless)- New Version 

Blue button is used when a patient is not feeling well or request for a help, he/ she can press the button to trigger the alarm. The caregiver will receive an alert from the nurse call station monitor to provide assistance.

Features: 	 Portable Advanced Call and Reset Button Silicone protection and pullproof ability 	 Multi - usage and attachability 	 Easy battery replacement Simple steps to re-program ID 	 Flexible composition 	 Applicable for those temporary periods or newly built beds  

Blue Button

By using wireless sensor pad, it effectively monitor the patients who need to stay in a bed for a long period. The transmitter will send an alert to the Alarm Monitor/ Medical Call Centre.<br>
<br>
Features:
<ul>
	<li>Available in cored or cordless sensor pad options</li>
	<li>Simple to full-featured signal devices</li>
	<li>Quickly alert staff when patients exit</li>
	<li>Simple installation</li>
	<li>Economy choice</li>
</ul>


Fall Management System

It is an ideal product for elderly or patient care. It provides an early alert signal to the caregivers or family members when the elderly or patient tries to get up from the bed or chair. Plugs in a universal nurse call button allow the elderly to call for a helping hand without a single word. 

My Sourcing

Unfollow this supplier?

Unfollow this supplier?