Screws

Honeytek Instrument (HK) Co.

 This featured insulation tester comes with a large digital&nbsp;display.&nbsp;It features a low-battery indicator for your convenience. It helps test the integrity of windings or cables in motors, transformers and electrical installations.  	 AC voltage: 750V. 	 Accuracy: &plusmn;(1.5%rdg+5d). 	 With backlight.  

Insulation Tester

Meet (China) Ltd

Heavy duty rubberized cabinetInsulation testing up to 1000VInsulation breakdown voltage ramp featureContinuity featureNull function for accuracyBreakdown voltage diagnostic functionHands free function for use with continuity or insulation testsFully protected against accidental connection to mains voltageConnection shown by red LED and an audible warningVisual and audible warning of voltage presentAuto discharge of capacitive circuitsBattery powered : 4 AA (R06 / LR06)

Insulation and Continuity Tester

SHENZHEN VICIMETER TECHNOLOGY CO.,LTD.

VC60B+ Insulation Tester  Features: An accurate, reliable and easy-to-use insulation tester Large LCD display, easy to read Strong anti-magnetic and anti-jamming function Full function protection, anti high voltage circuit design Unit symbol display, easy to use High voltage and short circuit input alarm  Technical Data: Basic function Range Accuracy Resolution Insulation Resistance 250V±10% test voltage 0~200MΩ ±(4.0%+2) 100kΩ 500V±10% test voltage 0~200MΩ 100kΩ 1000V±10% test voltage 0~2GΩ 1MΩ Resistance 0~2kΩ ±(1.0%+5) 1Ω DCV 0~1000V 1V ACV 0~750V ±(1.5%+5) 1V  Special Function: Model VC60B+ Continuity alarm Less than 30Ω±10Ω Low battery indication Less than approx.7.5V Data hold √ LCD backlight Approx.10Sec. Function protection √ Input impedance 1MΩ Sampling rate 3 times/Sec. AC frequency response 50-200Hz Operation mode Manual range Max. display 1999 LCD size 75 x 52mm Power source 1.5V AA battery x6pcs, or external DC 9V power source Power consumption Quiescent current approx.3mA  General Characteristic: Color Orange and Gray Weight 580g (including battery) Meter size 176 (L) x116 (W) x63 (D) mm Standard accessory Test lead, shoulder strap, battery, operation manual Individual packing Gift box Master carton packing 20pcs Master carton size 37.5*36*43CM Master carton weight  17.5KG  

Vicimeter VC60B+ Insulation Tester for Motor, Cable, Electromechanical equipments

Kangtai Electric Co., Ltd.

 Featured is a high-quality voltage tester with a range of up to 250V AC. The tester is well insulated for enhanced safety. This excellent voltage tester is widely used on wall sockets, lamp holders, circuit breakers, cords and cables.     Tester range: 200V to 250V AC.   Reliable performance.  

Voltage Tester

LISUN ELECTRONICS (SHANGHAI) CO., LTD

Impulse Voltage Generators | Impulse Generators | Impulse Withstand Voltage Tester |High VoltageSurge Generator is according to IEC255-5,GB-14711 , GB/T-14598.3, IS-13252-1, IEC60060,IEC60065,GBT17215.301 andGBT17215.322. The insulation performance test is suitable for all kinds of electrical and electronic products (such as energy meter, household appliances, low voltage electrical appliances and small power motors). Standard:IEC255-5 “Relays – Insulation tests”IS-13252-1 “Information technology equipment — Safety Part 1 General requirements”IEC60060 “IEC 60060-1-2010 High-voltage test techniques – Part 1 General definitions and test requirements”IEC60065 ” Audio, video and similar electronic apparatus – Safety-requirements”IEC 60255-5:2000/GB/T-14598.3″Electrical relays – Part 25: Electromagnetic emission tests for measuring relays and protection equipment”GB/T-3048.8 “Test methods for determining electrical properties of electric cables and wires.A.C. voltage tests” LISUN ModelSUG255LXSUG255MXSUG255PXSUG255PX-20KVSUG255PX-25KVSUG255PX-30KVRange of Output Voltage0～12kV0～20kV0～25kV0～30kVImpedance of Generator12Ω and 500Ω38Ω and 500Ω2Ω and 500ΩVoltage Output Waveform1.2 / 50μsPolarity of Output VoltagePositive and NegativeOperation ModeManually and AutomaticTest Repetition1～9999Interval Time3～9999s

Impulse Voltage Generators | Impulse Generators IEC255-5, IEC60065

SHENZHEN HANYAN ELECTRONICS TECHNOLOGY CO LTD

 	 Maximum display: 1999 	 Operating temperature: 0℃~40℃ 	 Relative humidity: 30%RH~85%RH 	 Overrange display: The highest bit is displayed &quot;1&quot; 	 Size: 175&times;110&times;70mm 	 Weight: about 630g&nbsp;(battery included) 	 Power: 9V (6nos1.5V 5battery)  

The ZY-3 Needle Flamp Test apparatus is mainly used for testing lighting equipment, low-voltage electrical appliances, household appliances, power tools, electronic instruments, electronic meters, etc. Additionally, this instrument is also suitable for testing insulation materials, engineering plastics, and solid flammable materials. The needle flame test apparatus consists of a needle flame burner, a working chamber, and a temperature measuring device. The needle flame test apparatus utilizes a needle-shaped burner with a specified size (Φ0.9mm) and is fueled by a specific gas (butane or propane). The burner is oriented at a angle of 45° and ignited for a predetermined time onto the test specimen, evaluating the ignition hazard of small flames caused by internal fault conditions of the equipment based on whether the test specimen and the ignition pad ignite, the duration of combustion, and the length of the flame. Standard:IEC 60695-2-2:2021 “Fire hazard testing – Part 2: Test methods – Section 2: Needle-flame test”IEC 60695-11-5:2016 “Fire hazard testing – Part 11-5: Test flames – Needle-flame test method – Apparatus, confirmatory test arrangement and guidance”IEC 62368-1:2023 “Audio/video, information and communication technology equipment – Part 1: Safety requirements” Specification:• Angle of burner: 45° (when in test) / 0° (when adjust the flame’s height)• Needle flame burning time: 0~999.9s±0.1s (adjustable, 30s in general)• After-flame time: 0~999.9s±0.1s, auto record and pause manually• Height of flame: 12mm±1mm• Gas: 95% butane (Note: Digital flow meter is optional with extra cost)•Test range of temperature: 0~1000℃• The temperature rises from 100℃±2℃ to 700℃±3℃ within 23.5 seconds±1s• Thermocouple: Φ0.5mm K type• Applied with touch screen and remote control• Number of burns for a single test: single or multiple burns can be set LISUN ZY-3 needle flame tester can run multiple times flame test in a single test automatically according to the Annex S S.1 of the IEC62368-1 standard: 

Needle Flame Test

The ZRS-3H Glow-wire Test Apparatus is used to test the flammability of plastic sheets or other insulating materials. The specimen is exposed to a high temperature glow wire (nickel/chrome wire) through a standard test procedure. It is used to identify whether the insulating material does not reach a certain temperature or ignite to prevent fire hazards around it. What is glow wire test?The Glow wire tester ZRS-3H/ZRS-3HS is mainly used to test the ignition performance, ignition temperature, flammability and flammability index of lighting equipment, electronic products and household appliances. The equipment adopts high-temperature sprayed steel structure and imported instrument display, which is easy to operate and has stable test performance. This equipment is mainly used for flame retardancy testing by QC departments and related enterprises. Standard:IEC 60695-2-1:2021(VDE0471:2019) “Fire hazard testing – Part 2: Test methods – Section 1/sheet 1: Glow-wire end-product test and guidance”IEC 60695-2-11:2021(GB/T5169.10-2006)”Fire hazard testing – Part 2-11: Glowing/hot-wire based test methods – Glow-wire flammability test method for end products (GWEPT)”IEC60695-2-10:2000 “Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure”IEC 60695-2-12:2021 “Fire hazard testing – Part 2-12: Glowing/hot-wire based test methods – Glow-wire flammability index (GWFI) test method for materials”IEC 60695-2-13:2000 “Fire hazard testing – Part 2-13: Glowing/hot-wire based test methods – Glow-wire ignition temperature (GWIT) test method for materials”IEC 60335:2023 “Household and similar electrical appliances – Safety – Part 1: General requirements”UL 746A:2021 “Standard for Polymeric Materials – Short Term Property Evaluations”IEC 829 Specification:• Heating temperature: adjustable continuously within the range of 25~1100°C, the accuracy of temperature is 3°C, the resolution of temperature is ±1°C• Glow-wire time: 0.1-999.9s，±0.1s(time range is adjustable)• Ignition time: 0.1-999.9s (auto record, manual pause)• Flame-out time: 0.1-999.9s (auto record, manual pause)• Glow wire pressure on test specimen: 0.95±0.1N. Limiting pressure depth is 7mm.• Glow wire: φ4 nickel (80％) and chromium (20％). Made in specific dimensions.• Thermocouple: φ1 armored nickel-chromium/nickel-aluminum wire, K Type.• Automatic departure: While reaching specified glowing time, test specimen will depart from glow wire automatically. 

Glow-wire Test Apparatus

Goldsun Electronics Co., Ltd.

The professional cable tester is designed to identify and trace wires or cables within a group without damaging the insulation. Red and black test leads are provided. It has&nbsp;standard 4-conductor modular cord and plug. It works with any tone generator to identify wires.
 
  Verifies continuity, polarity, and detects faults. 
  Composite tip reduces chock risk. 
  LED signal-strength indication. 
  Adjustable volume control. 
  Earphone jack for noisy environments. 
  Modular jack and test pins for multiple connection options. 
  Ring-tip polarity test indicator. 
  Accessories: BNC/F adapter, 50&Omega; BNC terminator, RG58U cable, 9V battery, carrying case. 
 

Cable Tester

Shenzhen Everbest Machinery Industry Co., Ltd. (CEM)

 	 Rugged multifunction installation tester with 3.5&quot; TFT color LCD display, provides insulation resistance, earth resistance, loop impedance, voltage, RCD, PFG and PSC testing. 	 It is designed with software system and ensure the safety of electrical installations in domestic, commercial and industrial applications. 6650 can ensure the fixed wiring is safe and correctly installed. 	 It is fast sampling and dual display, clear symbols and exceptionally wide viewing angle are for easy and safe readings.  

Multifunction Installation Tester

Zhangzhou Eastern Intelligent Meter Co Ltd

 	 The ground search metal detectors can be used for the detection and identification of the metals underground 	 Alarm Mode: Light, audio (beep or earphone) 	 Adjustable sensitivity 	 Max. Depth: 1.5m 	 Lithium battery 	 Power Source: DC 5V / 0.6W, 1250mAh, lithium battery x 1pc  

Ground Search Metal Detector

Guangzhou Duoyi Electronics Ltd.

Showing is an electrical testing instrument with multi functions. Professional and accurate, this tester provides the auto ranging, data hold and LCD backlight. Together with a well-designed packaging box, this tester is perfect for various electronic product testing. 	 Ground resistance measurements from 0.01ohm to 2000ohms with 0.01ohm resolution. 	 Product net weight approx. 900g.&nbsp; 	 Measure insulation resistance to 2000M ohms. 	 Test voltage 250V, 500V, 1000V. 	 AC voltage measurement to 600V. 	 Check phase sequence and phase status. 	 Auto ranging, data hold, LCD backlight. 	 Low battery warning. 	 Complete with test leads, auxiliary earth bars, phase wire, heavy duty carry case and eight AA. 1.5V dry cells. 	 Earth resistance: 0~20/200/2000&Omega; &plusmn;(2%+5). 	 Testing voltage: 250/500/1000V. 	 Insulation resistance: 0.1~2000M&Omega; &plusmn;(3%+5). 	 Phase rotation check: yes. 	 AC V 700V &plusmn;(2%+5). 	 Auto range: yes. 	 Function symbol display: yes. 	 Data hold: yes. 	 Low battery warning: yes. 	 Max. displays 1999. 	 LCD backlight yes. 	 Power AA1.5V x 8.  

Multi Function Tester

 	 Detect 2&quot;x4&quot; stud upto 0.75&quot; (18mm) thickness of drywall 	 Auto Calibration 	 With sound and light feedback 	 Compact in size and user friendly 	 Operated by 1.5V x 2 pcs. button cell batteries (LR44, AG13, L1154 etc.) 	 Batteries included  

Stud Detector with keychain_

This is a multifunctional metal detector with a sleek and elegant appearance. It is used to detect the presence of metal nearby. This metal detector is easy and safe to operate.

 Key Specifications/Special Features: 

- Detect metal&nbsp;
- Non-contact AC Voltage: 70-600VAC&nbsp;
- Continuity check: 0-50M ohm&nbsp;
- DC Polarity check: 6 - 36VDC&nbsp;
- Ionizer test&nbsp;
- Foldable sensing arm up to 90o&nbsp;
- Compact in size&nbsp;
- Audible and visible&nbsp;
- Battery powered : &nbsp;2 x 1.5V (L1154 / LR44 / AG13)&nbsp;
- Dimension (LxWxD) mm : 140x30x20&nbsp;
- Worldwide patent pending&nbsp;
- Originated, designed and developed by MEET

&quot;FREE&quot; shipping cost arranged by &quot;First Come First Serve&quot;. Valid to 31 Mar 2018 for samples ordering only.

Multifunctional Metal Detector

Shenzhen Leagend Optoelectronics Co Ltd

Wireless OBDII trip monitor Diagnostic Adapter for Android and iSO phones 	 Wireless Diagnostic Adapter CBlackbox-BT(BLE327)Bluetooth 4.0 	 Operate the diagnose on iphone/iPad and Android Smart phone via Bluetooth 4.0 	 Works with all OBD-II compliant vehicles 	 Wireless (Bluetooth 4.0) in10 meter 	 Software included for Android and iPhone 	 All Apps for Android and iPhone are designed by ourselves, download for free via Internet.  Functions: 	 Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions ). 	 Clear trouble codes and turn off the MIL (&quot;Check Engine&quot; light) 	 Display real-time driving data, including:	 		 Engine RPM, Calculated Load Value, Coolant Temperature, Fuel System Status, Vehicle Speed, Timing Advance, Horsepower,&nbsp; Engine load 	 	 	 All data are counted for each trip as each day, each week, each year. 	 Record every day and every month driving information. 	 Including the driving time, driving mileage, average speed, max speed, max RPM, fuel consumption, fuel cost. 	 Track each trip route in Google Map, including the starting time, stop time, driving time, Max speed, average speed, Max RPM, fuel consumption, Fuel cost. Etc. 	 Maintenance record and remind for oil reset, brake replace, air filter, wheeled transposition. tire, nozzle ,etc 	 Support mobiles: All iOS and Android smart phone with Bluetooth 4.0 	 iOS (iPhone 4S,5, 5C, 5S and later, iPad 2，iPad Air, iPad mini, iPad mini 2 and later) 	 At least Android 4.3 (support for Bluetooth 4.0 phones)  Vehicle Coverage 	 All OBD2 &amp; EOBD compliant vehicles with a 16-pin interface(include all 1996 and newer cars, light trucks and SUVs sold in the United States, all 2000 and newer sold in the Europe, Japan and Asian Area) CAN, VPW, PWM, ISO9141, KW2000 protocols compliant vehicles(including those equipped with the next-generation protocol Control Area Network.)  

Wireless OBDII Trip Monitor Diagnostic Adapter

Astrotech International Ltd

Features:   A simple and accurate electromagnetic (EMF) gauss meter.  Specifications:   Size: 4x1-3/4x7/8 inch.   Weight: 2.5 oz. including battery.   Power: single 1.5V AAA alkaline battery (included).   Display: 10 high visibility LEDs.   Display range: 1.34 to 30 milliGauss.   Detection range: 50-60 Hz.   Accuracy: +/- 3dB over full range calibration traceable to NBS standards.  

Electrosensor (Electromagnetic Field Detector)

  Introduction :  

External wireless connectivity moisture meter is designed for use in wide applications, such as : 	 For locating water leaks behind walls, above ceilings and below floors. 	 For wood working, measure moisture content before finishing, painting processing. 	 For textile industries, regular check moisture content of fabrics and leathers, quality check to prevent mold. 	 For printing industries, check moisture content of paper before printing. 	 One of the most advantages of the meter is wirelessly connect to Smart phone / Tablet / PC to view data, record reading, capture picture with data on it and send the information to headquarter.  
  Key Specifications/Special Features :   	 Sense type : Spherical / pin-point non-destructive / remote pin 	 External output jack for pin type measurement 	 Replaceable sense stick &amp; stainless steel pins with protective cover 	 Auto zero calibration and self-calibraton check 	 Measuring : 6.0-87.6 (% WME) or 0.1-99.9 REL 	 Relative reading (Rel) 	 Large LCD with backlight display + Color 32 dot LED (bar type)&nbsp; 	 User pre-set selectable mode that is APO, alarm&nbsp; 	 Measure wood / concrete moisture&nbsp; 	 5V (DC) input 	 Auto Power Off when below 5.5V within : &lt; 10 secs. 	 Non-destructive measuring depth : 100mm / 4.0 inches max. 	 Low battery indication : &lt; 6.5V 	 Operating current : &lt; 70mA max. 	 Freeze / Hold reading 	 Audible sound 	 Standalone mode : without external wireless module 	 Wireless connectivity transmit data to Smart phone/Tablet with iOS APPS or Android APPS(require external wireless module MS-WMB1, sold separately) 	 Data logger compatible (require external wireless with memory module MS-WMBM1, sold separately) 	 Battery powered : 1 x 9V (6F22 / 6LR61 / 1604)&nbsp; 	 Dimension (LxWxD) mm : 240x70x40 	 Weight (approx.) grams : 205 (without battery)&nbsp;  

Wireless Connectivity Moisture Meter with pin type and sense stick 

VC4060B Inductance Insulation Multimeter Features: 1.  New type holster, streamlined design, comfortable handle; 2.  Large LCD display makes reading clear; 3.  Strong antimagnetic and anti-interferential performance, full function protection; 4.  Auto power off when there is no measurement in 15 minutes; 5.  Unit symbol display, easy to read backlight display; , 6.  Insulation Resistance Test, True RMS, NCV, inductance, frequency/duty cycle, and data hold function.  Technical specifications: Basic function Range Accuracy DCV 600mV/6V/60V/600V/1000V ±(0.5%+5) ACV 6V/60V/600V/750V ±(0.8%+10) DCA 6mA/60mA/600mA/6A/20A ±(1.0%+5) ACA 6mA/60mA/600mA/6A/20A ±(1.5%+10) Resistance 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ ±(0.8%+2) Inductance 6mH/60mH/600mH/6H/60H/100H ±(1.5%+5) Capacitance 60nF/600nF/6uF/60uF/600uF/6mF/60mF ±(2.5%+5) Frequency 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz ±(0.5%+4) Insulation 2000MΩ for 1000V ±(4.0%+2) Temperature -40℃～1000℃ /-40℉～1832℉ ±(1.0%+5)  Special function:    Max. display 6000 Safety level CAT. III 600V True RMS √ NCV √ Function Protect √ Diode test √ Continuity test Warning sound when less than 50Ω Duty cycle measuring √ Data hold √ Backlight display √ Max-Min MAX., MIN. value and difference value between MAX and MIN Auto power off Approx.15minutes Low battery indication Approx. less than 7.6V Input impendence 10MΩ Sampling rate 3times/s AC frequency response 40Hz-2kHz Operation way Manual or auto range Max. display 6000 LCD size 65×40mm Power 6x1.5V AA battery Power dissipation Quiescent current approx. 6mA  General Info: Color Orange holster and Grey device Weight 480g (including battery) Meter size 200mm×92mm×50mm Standard accessory Test leads, crocodile clips, temperature probes, battery, manual, handbag Packing Gift box Quantity per carton 20pcs Carton size 46.5*31.5*29.0cm GW per carton 15kg   

Vici VC4060B  New Energy Vehicle Repair Insulation Inductance Test Multimeter

VC4060A Insulation Multimeter   Features: 1.  New type holster, streamlined design, comfortable handle; 2.  Large LCD display makes reading clear; 3.  Strong antimagnetic and anti-interferential performance, Full function protection; 4.  Auto power off when there is no measurement in 15 minutes; 5.  Unit symbol display, easy to read; backlight display; 6.  Insulation Resistance Test, True RMS, non-contact voltage detection, frequency/duty cycle, and data hold function.  Technical specifications: Basic function Range Basic accuracy DCV 400mV/4V/40V/400V/1000V ±(0.5%+5) ACV 4V/40V/400V/750V ±(0.8%+10) DCA 400uA/4000uA/40mA/400mA/4A/20A ±(1.0%+5) ACA 400uA/4000uA/40mA/400mA/4A/20A ±(1.5%+5) Resistance 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ ±(0.8%+2) Capacitance 40nF/400nF/4uF/40uF/400uF/4mF/40mF ±(2.5%+5) Frequency 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz ±(0.5%+4) Insulation 2000MΩ for 1000V ±(4.0%+2) Temperature -40℃～1000℃/-40℉～1832℉ ±(1.0%+5)  Special function:  Max. display 4000 Safety level CAT.III 600V True RMS √ NCV √ Function Protect √ Diode test √ Continuity test Warning sound when less than 50Ω Duty cycle measuring √ Data hold √ Backlight display √ Max-Min MAX., MIN. value and difference value between MAX and MIN Auto power off Approx.15minutes Low battery indication Approx. less than 7.6V Input impendence 10MΩ Sampling rate 3times/s AC frequency response 40Hz-2kHz Operation way Manual or auto range LCD size 65×40mm Power 6x1.5V AA battery Power dissipation Quiescent current approx. 6mA  General Info: Color Orange holster and Grey device Weight 480g (including battery) Meter size 200x92x50mm Standard accessory Test leads, crocodile clips, battery, manual, TP01 temperature probe Packing Gift box Quantity per carton 20pcs Carton size 46.5*31.5*29cm GW per carton 15kg  

Vici VC4060A  New Energy Motor Cable Checking Insulation Multimeter

The LS9955/LS9956Automatic Safety Test System (electrical safety analyzer) combines the following functions: Withstand Voltage Test (AC / DC), Insulation Resistance Test (IR), Leakage Current Test (LLC), Grounding Resistance Test (GR) and Power Test (LS9956 includes Power Test, LS9955 does not include Power Test). The equipment is mainly used for lighting fixtures, household appliances and motor tools safety test on the production line or in the R&amp;D laboratory. Standard:IEC/EN 60335-1:2023/GB 4706.1-2024 “Household and similar electrical appliances – Safety – Part 1: General requirements”UL 60335:2022 “Standard for Safety of Household and Similar Appliances, Part 1: General Requirements”IEC 60598:2024/GB 7000-2023 “Luminaires – Part 1: General requirements and tests”IEC 60950:2020 “Information technology equipment Safety –Part 1: General requirements “IEC 62368-1:2023/GB 4943-2022 “Audio/video, information and communication technology equipment – Part 1: Safety requirements”IEC 60601-1 3.1:2012/ GB 9706.1-2020 “Medical Electrical Equipment – Part 1: General Requirements For Basic Safety And Essential Performance” Specification:• Remote control device and can control by software (Optional)• Display all setting parameters and testing results in the same big LCD screen• PASS/FAIL limit values can be set.If the object fails the test, there will be a light/sound alarm• Test mode is programmable; 50 groups settings are available, 8 test steps per group• Quick discharge. Support 50Hz and 60Hz frequency; Electric safety wall detecting feature• The LS9955 can test Withstand Voltage (AC/DC), Insulation Resistance (IR), Leakage Current (LLC) and Ground Resistance (GR)• The LS9956 can test Withstand Voltage (AC/DC), Insulation Resistance (IR), Leakage Current (LLC), Ground Resistance (GR) and Power Withstand Voltage Test (AC/DC)Insulation Resistance Test (IR)Voltage RangeAccuracyCurrent RangeIR RangeAccuracyVoltage Range100~4000V± (5%+3V)AC: 0.10~20.00mADC: 0.10~12.00mA1.00~2000MΩ5% + 0.5MΩDC100~1000VLeakage Current Test (LLC)Grounding Resistance Test (GR)LLC RangeAccuracyVoltage RangeGR RangeAccuracyOutput Current0.10~20mA± (0.3%+5uA)AC10.0~300.0V0~600mΩ± (5%+2mΩ)AC1.00~30.00APower TestVoltageCurrentPowerPFAccuracyTest Time10~300V0.010~20.00A1.0~6000.0W0.2~1.0Class 0.50~999.9sP.S. The LS9955/LS9956 of Leakage Current Test (LLC) needs to work with LISUNITEU-SP1KS or ITUS-SP1KS Isolation Transformer (The Output is 1.06times of the input). The LS9955/LS9956 of Leakage Current Test (LLC) and Power Test need to work with LISUNLSP-1KVARC orLSP-1KVAS AC Power Supply. 

Automatic Safety Test System

VC4060AT Insulation Multimeter Features: 1.   New type holster, streamlined design, comfortable handle; 2.   Large LCD display makes reading clear; 3.   Strong antimagnetic and anti-interferential performance, full function protection; 4.   Auto power off when there is no measurement in 15 minutes; 5.   Unit symbol display, easy to read; backlight display; 6.   Insulation Resistance Test, True RMS, NCV, temperature, Frequency, duty-cycle, and data hold function.  Technical parameters: Basic function Range Accuracy DCV 600mV/6V/60V/600V/1000V ±(0.5%+5) ACV 6V/60V/600V/750V ±(0.8%+10) DCA 6mA/60mA/600mA/6A/20A ±(1.0%+5) ACA 6mA/60mA/600mA/6A/20A ±(1.5%+10) Resistance 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ ±(0.8%+2) Capacitance 60nF/600nF/6uF/60uF/600uF/6mF/60mF ±(2.5%+5) Temperature -40~1000℃ | -40~1832℉ ±(1.0%+5) Frequency 10Hz/100Hz/1kHz/10kHz/50kHz ±(1.0%+3) Insulation 300MΩ, 500MΩ, 2000MΩ ±(4.0%+2)  Special function Max. display 6000 Safety level CAT. III 600V True RMS, NCV √ Function Protect √ Diode test √ Continuity test Warning sound when less than 50Ω Duty cycle measuring √ Data hold, Backlight display √ Max-Min MAX., MIN. value and difference value between MAX and MIN Auto power off Approx.15minutes Low battery indication Approx. less than 7.6V Input impendence 10MΩ Sampling rate 3times/s AC frequency response 40Hz-2kHz Operation way Manual or auto range LCD size 65×40mm Power 6x1.5V AA battery Power dissipation Quiescent current approx. 6mA  General Info: Color Orange holster and Grey device Weight 480g (including battery) Meter size 200mm×92mm×50mm Standard accessory TL98A test leads, TL1358 alligator clip test leads, TP01 temperature probes, battery, manual, handbag, color box Quantity per carton 20pcs Carton size 46.5*31.5*29.0cm GW per carton 17kg    

VC4060AT 300MΩ/250V 500MΩ/500V  2000MΩ/1000V Insulation Test Multimeter

Widely used in electro-optical source, research teaching, industry inspection as well as agriculture researching and illumination control
Large LCD display 	 Backlight LCD display 	 Data-hold function  Specifications 	 Range:1~50000 Lux in 3 ranges 	 Sampling Rate: About 2 times/sec 	 Sensor: Silicon photodiode &amp; filter 	 Weight: 198g 	 Power Source: 9V (6F22) battery x 1pc  

Digital LUX Meter

 	 With earphone 	 Desensitize button 	 Vibration alarm 	 LED light alarm 	 Audio alarm 	 E-SUN metal detectors have ever been used in the &quot;16th Congress&quot; &amp; &quot;Two Congress&quot;, being designated by Guard Department as security instruments at Tiananmen (Beijing, China) district  

Hand-Held Metal Detector

Zhangzhou Huayi Electronics Co Ltd

  - This clamp meter has a handle which makes it very handy for use.  - It is suitable for electricians and handymen.  - It is equipped with a continuity beeper and can carry out insulation test.  - It can also hold the data measured.  - DCV: 1000V +/- (0.5%+1).  - ACV: 750V +/- (1%+4).  - ACA: 200A - 1000A +/- (2%+5).  - OHM: 200 - 20k onm +/- (2%+2).  - Power supply: 9V 6F 22.  - Maximum display: 1999.  - Product size: 230x90x37mm.  

My Sourcing

Unfollow this supplier?

Unfollow this supplier?