Watch Box

Shanghai Linsky Electrical Co., Ltd.

Plastic Electrical Outlet Box ExtendersDesigned for precise alignment of wiring devices when the electrical box is set back from the wall surface, our plastic extenders are ideal for walls or ceilings made of concrete, tile, gypsum, plastic, wood, or other combustible materials.Key Features &amp; Benefits:Levels and supports wiring devices for a flush finishCompatible with handy boxes and 4" square electrical boxes with plaster rings for single switches/receptaclesWorks with all standard devices, switches, receptacles, and GFCIsManufactured from 105°C continuous use, 94V-0 rated flame retardant plastic for enhanced safetyAdjustable up to a 1-1/2" box extensionPlastic construction prevents stripping of wire insulation or short circuits caused by screw contactETL Listed (File No. G510519, 2-HR-W-C) with 2 Hour Fire RatingInstallation Notes:For non-combustible surfaces: Box front edge shall not sit back more than 1/4" (6mm) from finished surfaceFor combustible surfaces: Box shall be flush with finished surface or project therefromCut the flanges off the inside box extender as needed for multi-box installations EXR-1 (Single Gang)Product Name: Single Gang Plastic Electrical Outlet Box Extender (ETL Listed)Product Attribute(s):Adjustment:Up to 1-1/2" extensionCompatibility:Single gang devices, switches, receptacles, GFCIsSize:2.43"×4.28"×1.85" (inch), 64×45×26.5 cm (outer box) EXR-2 (Two Gang)Product Name: Two Gang Plastic Electrical Outlet Box Extender (ETL Listed)Product Attribute(s):Adjustment:Up to 1-1/2" extensionCompatibility:Two gang devices, switches, receptacles, GFCIsSize:4.33"×4.28"×1.85" (inch), 64×45×26.5 cm (outer box) EXR-3 (Three Gang)Product Name: Three Gang Plastic Electrical Outlet Box Extender (ETL Listed)Product Attribute(s):Adjustment:Up to 1-1/2" extensionCompatibility: Three gang devices, switches, receptacles, GFCIsSize:6.12"×4.28"×1.85" (inch), 84×43×37 cm (outer box) EXR-4 (Four Gang)Product Name: Four Gang Plastic Electrical Outlet Box Extender (ETL Listed)Product Attribute(s):Adjustment: Up to 1-1/2" extensionCompatibility: Four gang devices, switches, receptacles, GFCIsSize: 7.80"×4.28"×1.85" (inch), 84×45×22 cm (outer box)EXR-5 (Ceiling Box)Product Name: Plastic Ceiling Box Extender (For Slant Block Ceilings, ETL Listed)Product Attribute(s):Adjustment: Up to 1-1/2" extensionCompatibility:Slant block ceilings, ceiling electrical boxesSize:4.92"×4.92"×1.50" (inch), 84×43×38 cm (outer box)

USLINSKY Outlet Box Extender

1-Gang BMC New Work Switch and Outlet Box with Stud Mount "Z" Hanger Bracket🔧 Product OverviewThis 1-gang new work electrical box is expertly crafted from high-quality Bulk Molding Compound (BMC), a premium material renowned for its exceptional durability, heat resistance, and non-deforming properties. Designed for North American residential and light commercial electrical projects, the box comes equipped with an integrated "Z" Hanger Bracket (Stud Mount) for stable, hassle-free installation, making it an ideal choice for new construction, retrofitting, and wiring upgrades.📋 Core SpecificationsModel Options: FGB120-1/4B, FGB120-1/2B, FGB122-1/2B (multiple offset/depth variants to meet diverse project needs)Material: High-strength BMC (Non-metallic, corrosion &amp; crack-resistant)Capacity: 20.5 cu in (FGB120 series) / 22.5 cu in (FGB122 series)Dimensions:FGB120-1/4B &amp; FGB120-1/2B: 2-1/4" W × 3-13/16" D × 3-1/4" LFGB122-1/2B: 2-1/4" W × 3-27/32" D × 3-9/16" LBracket Type: Integrated "Z" Hanger Bracket (1/4" / 1/2" offset options available)Fire Rating: 2-Hour fire resistance (meets strict North American safety standards)Certification: ETL Certified (Intertek Test No. 5010519 2-HR-W-C)Voltage Compatibility: 120/277V AC (suitable for standard North American electrical systems)✅ Key AdvantagesSuperior Durability: BMC material resists warping, cracking, and heat damage, ensuring long-term reliability even in high-temperature environments.Effortless Installation: Pre-installed "Z" hanger bracket allows for quick alignment and hammer-driven mounting to studs—no complex tools or professional wiring experience required.Enhanced Safety: 2-hour fire rating provides critical fire protection, while non-metallic construction eliminates electrical conductivity risks, complying with the National Electrical Code (NEC).Versatile Compatibility: Works seamlessly with standard 1-gang GFCI outlets, light switches, dimmer switches, and standard wall plates, suitable for kitchens, bedrooms, living rooms, and light commercial spaces.Cost-Effective Solution: Reduced installation time and labor costs thanks to user-friendly design, perfect for both DIY projects and large-scale construction contracts.🏠 Wide Application ScopeIdeal for residential buildings (single-family homes, apartments, condos), light commercial properties (offices, small retail stores, garages), and renovation projects. Perfect for wiring switch boxes, outlet boxes, GFCI receptacle boxes, and dimmer switch boxes in both new construction and retrofitting scenarios.

USLINSKY Box with Z-Hanger

LINSKY Non-metallic New Work Plastic Boxes are purpose-built for residential and light commercial electrical new construction, delivering a cost-effective, easy-to-install alternative to metal boxes. Crafted from durable non-metallic plastic, these 1-gang nail-on boxes are engineered for use with non-metallic sheathed (NM) cable, featuring captive nails for secure, fast mounting to wall studs. All models carry ETL listing (Intertek 5010519 2-HR-W-W-C) and a 2-hour fire rating, meeting strict safety and code requirements for indoor dry-location installations. APB118N： LINSKY APB118N is a 18 cubic inch 1-gang nail-on non-metallic new work plastic box, optimized for standard residential electrical installations. With a compact 2-7/8" depth and four knockouts, it provides efficient, code-compliant space for basic 1-gang wiring (e.g., standard outlets, light switches). The captive nail mounting system enables quick, secure attachment to wall studs, while the durable non-metallic plastic construction offers corrosion resistance and eliminates the risk of metal-related short circuits. ETL listed (Intertek 5010519 2-HR-W-W-C) and rated for 2-hour fire resistance, this box is ideal for use with non-metallic sheathed (NM) cable in new construction residential and light commercial projects.APB120N： LINSKY APB120N is a 20 cubic inch 1-gang nail-on non-metallic new work plastic box, designed for applications requiring increased internal wiring capacity. Featuring a 3-1/4" depth and four knockouts, it accommodates bulkier cables, additional devices, or moderately complex wiring configurations while maintaining a standard 1-gang faceplate footprint for seamless compatibility with standard wall plates. The captive nail mounting ensures secure stud attachment, and the non-metallic plastic construction delivers corrosion resistance and enhanced safety by eliminating metal contact risks. ETL listed with a 2-hour fire rating, this box is suitable for new work residential and light commercial installations using non-metallic sheathed (NM) cable. APB123N： LINSKY APB123N is a 23 cubic inch 1-gang nail-on non-metallic new work plastic box, the largest capacity model in the series, engineered for complex electrical installations. With a deep 3-1/2" profile and four knockouts, it provides ample internal space to handle multiple devices, thick gauge wiring, or advanced configurations while adhering to code fill requirements. The captive nail mounting system allows for fast, secure attachment to wall studs, and the non-metallic plastic construction offers corrosion resistance and eliminates the risk of short circuits from accidental metal contact. ETL listed (Intertek 5010519 2-HR-W-W-C) and rated for 2-hour fire resistance, this box is the premium choice for new work residential and light commercial projects using non-metallic sheathed (NM) cable.  

USLINSKY  Non-metallic  Plastic Box 

USLINSKY 2-1/2" Deep Galvanized Steel Non-Gangable Masonry Boxes with Conduit KO's (UL Listed E501003)Material: Galvanized SteelApplication: These masonry boxes are used for mounting switches, plugs, outlets and other electronic and electrical devices in masonry, brick and block walls. The non-gangable versions offer fixed configuration options. Use 2-1/2" deep boxes in 4" block walls.Advantages: This extra deep design allows for deep devices, numerous wires, switches and other electronic and electrical devices.Certification: UL ListedConduit Knockouts: Pre-punched side and bottom knockouts in 1/2"~3/4" sizes for flexible wiring installation.LT690 (1 Gang)Model No.: LT690Description: 1 Gang non-gangable masonry boxSide Conduit: (6) 1/2"~3/4"Dimension W×H: 3.75"×2"Bottom Conduit: (2) 1/2"~3/4"Application: Ideal for single electrical device installations (e.g., single switch, single outlet) in masonry walls, suitable for small residential rooms or compact commercial spaces.LT691 (2 Gang)Model No.: LT691Description: 2 Gang non-gangable masonry boxSide Conduit: (8) 1/2"~3/4"Dimension W×H: 3.75"×3.81"Bottom Conduit: (4) 1/2"~3/4"Application: Designed for dual electrical device installations (e.g., switch + outlet, two switches), commonly used in living rooms, bedrooms and office areas.LT692 (3 Gang)Model No.: LT692Description: 3 Gang non-gangable masonry boxSide Conduit: (10) 1/2"~3/4"Dimension W×H: 3.75"×5.62"Bottom Conduit: (6) 1/2"~3/4"Application: Suitable for triple electrical device combinations (e.g., three switches, switch + two outlets), ideal for larger rooms or high-traffic commercial areas requiring multiple control points.LT693 (4 Gang)Model No.: LT693Description: 4 Gang non-gangable masonry boxSide Conduit: (12) 1/2"~3/4"Dimension W×H: 3.75"×7.44"Bottom Conduit: (8) 1/2"~3/4"Application: For four electrical device setups (e.g., combination of switches and outlets), perfect for commercial spaces, conference rooms or large residential areas with high electrical demand.LT694 (5 Gang)Model No.: LT694Description: 5 Gang non-gangable masonry boxSide Conduit: (14) 1/2"~3/4"Dimension W×H: 3.75"×9.25"Bottom Conduit: (10) 1/2"~3/4"Application: Designed for five electrical device installations, suitable for commercial kitchens, retail spaces or utility rooms where multiple electrical controls and power outlets are required.LT960 (6 Gang)Model No.: LT960Description: 6 Gang non-gangable masonry boxSide Conduit: (16) 1/2"~3/4"Dimension W×H: 3.75"×11.06"Bottom Conduit: (12) 1/2"~3/4"Application: For six electrical device combinations, ideal for industrial control panels, large commercial facilities or specialized electrical rooms requiring extensive device mounting in a single enclosure.

USLINSKY  Masonry Boxes

Luen Yick Electrical Mfg Co Ltd

Metal clad 3-4G grid surface mount boxCE and RoHS certifiedMeets all UK and EU RegulationsGray Features: A full range of front loading grid switches and outlets modules Easy to upgrade or replace without the need to remove the mounting frameAvailable from 1 gang to 12 gang metal front plates with Stainless Steel, Polished Chrome, Molded white and Metal Clad finishes Pre-printed switch covers replaceableMetal and Molded white rocker switchesIdeal for domestic, industrial and commercial installationsAvailable with 1-2G grid surface mount box  #metalbox, #bottombox, #gridsystem, #modularsystem, #multifunctionpanel, #switchoutlet, #poweroutlet, #socketoutlet, #freematch , #easyinstall,   

Metal Clad Grid Surface Mount Box – Gray

SHENZHEN ECO-NEWLEAF CO.,LTD.

🛠️【 Easy Installation】- Hassle-Free Setup: Simply install the ECO-NEWLEAF receiver between the devices to be controlled and the power supply. You can effortlessly switch your lights on and off from anywhere using the convenient remote control panel. Expand your lighting system freely without disrupting the existing setup.  🔄【 Programmable and Expandable】- Tailored to Your Needs: With just one ECO-NEWLEAF wireless receiver, you can easily link up to 10 ECO-NEWLEAF wireless switch panels, creating a perfect and seamless home lighting control system.  🔄【No Battery and Safety】- Self-powered switch no batteries required or external power connecting, children touching is very safe and ideal switch(IP65) for damp environments application, such as outdoor, kitchen, bathroom, etc  💡【 Versatile for Various Occasions】- Perfectly Fits Multiple Settings: The small-sized ECO-NEWLEAF receiver easily integrates into control boxes such as canopies, distribution boxes, and electrical boxes. Ideal for offices, hotels, restaurants, factories, and more. Operating temperature: -25℃ to +65 ℃.  💡【 Long Life and 24-Month Warranty】- Reliable and Certified: CE, FCC, and RoHS approved. The ECO-NEWLEAF Switch is tested for up to 400,000 times. Enjoy peace of mind with our no-hassle 24-month warranty and friendly 24-hour customer service.  🛠️【EXTRA SWITCH】【1 Gang Switch】ASIN--B0BDGB6TB5;【2 Gang Switch】ASIN--B0BW827Y69;【3 Gang Switch】ASIN--B0BW81V8HG  ⚠️【 KINDLY NOTE】- Exclusive Compatibility: Only ECO-NEWLEAF master wireless switch panels are designed to efficiently control multiple receivers. Please be aware that ordinary wireless switch panels may not function properly when used with multiple receivers. 

Wireless Kinetic Switch

B K Z Int'l (HK) Enterprise Ltd

 	 BKZ0130PW RCD 1 gang socket. 	 Type: latching RCD-passive RCD, double pole. 	 Rated voltage: 230V AC. 	 Rated current: 13A max. 	 Frequency: 50Hz. 	 Trip current: 30mA. 	 Break time: 40m max. 	 Voltage surge: 4K (100kHz ring wave). 	 Endurance: 3000 cycles min. 	 Hit-pot: 2000V min. 	 Approval CE BS7288, BS1363. 	 Cable capacity: 3 x 2.5mm. 	 Minimum back box depth: 35mm 	 Application equipment, household appliances, etc. 	 Latching RCD (sometimes called passive) &ndash; when the power is lost due to an earth fault, the RCD trips out and isolates the circuit it is protecting. Latching RCD&rsquo;s do not trip during power cuts so they are great for fridges and freezers and also for protecting remote/unmanned areas. 	 This would also make them ideal for protecting some heating equipment set to &ldquo;frost protection&rdquo;, fish tanks, battery charging, and the protection of remote or unmanned areas.  How RCDs work: 	 RCDs work on the principle &quot;what goes in must come out&quot;. They operate by continuously comparing the current flow in both the active (supply) and neutral (return) conductors of an electrical circuit. If the current flow becomes sufficiently unbalanced, some of the current in the active conductor is not returning through the neutral conductor and is leaking to earth.  Examples of equipment recommended to be protected by an RCD: 	 Hand held electric power tools, such as drills, saws and similar equipment. 	 Tools such as jack-hammers, electric lawn mowers. 	 Equipment on construction sites. 	 Equipment such as appliances which move while in operation, such as vacuum cleaners and floor polishers. 	 Appliances in wet areas such as kitchens, including kettles, jugs, frying pans, portable urns, food mixers/blenders. 	 Hand held appliances such as hair dryers, curling wands, electric knives, etc. 	 Cord extension leads.  

My Sourcing

Unfollow this supplier?

Unfollow this supplier?