Microtech Technology Co Ltd

0.39 inch AMOLED FHD 1920 x1080 MIPI/Type-c Interface OLED Display for AR/VR Head mounted/Near-Eye DisplaysMTL0039FD02A-V1 is a 0.39 inch（1 cm) diagonal, FHD resolution(1920 x1080), active matrix color OLED (Organic Light Emitting Display)panel module based on single crystal silicon backplane . The pixel circuits and driving IC are integrated on the silicon backplane to get the compact size and very low power consumption. (Potential applications: Virtual Reality application（AR/VR）, Head mounted displays, Near-Eye Displays etc.)Small-size, high resolution 0.39 FHD Display PPI=5644  AP Operated Resolution (8*M, M=40~240) x RGB x (8*N, N=30~135)  Full color mode，16.7M colors  Fast response  Thin and light in weight  Color enhancement, Sharpness enhancement  High contrast mode  High fluency mode  Power-saving (PS) mode  Scan direction selection, up or down  Interface，Support MIPI only or MIPI(data)+I2C(CMD) 

0.39 inch AMOLED FHD 1920 x1080 MIPI/Type-c Interface OLED Display for AR/VR Head mounted/Near-Eye Displays

The display is a TFT active matrix electrophoretic display, with interface and a reference systemdesign. The 5.84inch active area contains 768x256 pixels, and has 1-bit white/black 1-bit red fulldisplay capabilities. An integrated circuit contains gate buffer, source buffer, interface, timing controllogic. oscillator, DC-DC.SRAM, LUT VCOM and border are supplied with each panel. 768x256 pixels display High contrastHigh reflectanceUltra wide viewing angle Ultra low power consumption Pure reflective mode Bi-stable display Commercial temperature range Landscape, portrait modes Hard-coat antiglare display surface Ultra Low current deep sleep mode On chip display RAM Waveform can stored in On-chip OTP or written by MCU Serial peripheral interface available On-chip oscillator On-chip booster and regulator control for generating VCOM, Gate and Source driving voltageIC signal master interface to read external temperature sensor Built-in temperature sensor Support partial update mode                          ParameterSpecificationsUnitRemarkScreen Size5.84InchDisplay Resolution768(H)x256V)PixelDPI:138Active Area140.70x46.90mmPixel Pitch0.1832x0.1832mmPixel ConfigurationRectangleOutline Dimension147.6(H)x59.58 (V)x 1.20(D)mmWeight20.6±0.5 

Custom OEM New Product Ultra Thin Low Power 5.84 inch E-paper E-ink LCD Module Display Electronic Label for Price Tags

   Display mode: capacitive touch panel.   Outline dimension: 164 x 100.0mm.   Active area: 154 x 93.05mm.   Remark: 1.0 pitch, 6 pin.  

7.0” Capacitive Touch Panel

Aiketon Electronics Ltd

We offer a full suite of integrated electronics manufacturing services from printed-circuit board (PCB) assembly to original equipment manufacturers (OEMs) including design support, procurement, assembly, final system build, test, and packaging. 

PCB Assembly

Suzhou UIGreen Micro&Nano Technologies Co., Ltd.

ICT wire probes are needle-shaped testing probes used in In-Circuit Testing (ICT), achieving electrical connections by directly contacting the pads on printed circuit boards or the pins of integrated circuits through fine metal wires. 

ICT Wire Probe

MGM Industries & Company

Application: Widely used for bacilli inspection of food, drink, medicine, biological, make-up, health products, water for drink, domestic sewage, and industrial water.  Features: * CMOS integrated circuit and LED digital display. * The special probe counts sensitively and accurately. * It is composed by counter, probe and count pond, etc. * The magnification is variable by adjusting the flectional arm.   

Bacterial Colony Counter

High performance at all stages of anesthesia Anesthesia machine not only can apply to adult, but also to pediatric and infant, The full range of ICU grade ventilation modes feature on anesthesia machine help you meet all the demands through the stages of anesthesia  Visible monitoring helps you provide the best therapy With 15 inch color touch screen, the anesthesia machine is able to show 4 waveforms and 2 loops simultaneously. Besides, Prunus plug-in gas monitoring modules are interchangeable between anesthesia machine system which can provide comprehensive breath analysis.  Integrated breathing circuit ease your work Anesthesia machine is configured with the automatic constant heating function to avoid the condensation water. The By pass function in the circuit makes it poss ible to change the CO2 absorder during surgery without gas leakage. 

Anesthesia Machine

Evergreen (H.K.) PCB Limited

The irregular outline of this PCB is accented with cut-offs and punched holes to ease mounting in various computing devices. It integrates conductive pathways, transistors and capacitors, forming circuits for functional use. The red solder mask finish further promises long-term applications with lasting good looks.

Features:
&bull; Material: FR-4.
&bull; Irregular outline of double layer design.
&bull; Accented with cut-offs and punched holes.
&bull; Integrate conductive pathways, capacitors and more.
&bull; Promise long-term applications.
&bull; Functional piece for electronic and computing devices.
&bull; Layer: 2.
&bull; Thickness: 1.6mm.
&bull; Finishing: HAL.
&bull; Solder mask color: red.

Rigid PCB

General Circuit Int'l Ltd

This ITO touch panel is an interactive input device integrated in&nbsp;electronic displays. The operator can simply give the instructions by touching the panel. It features excellent durability and can stand over 100, 000 touches.

 
  ITO touch panel: matrix, analog-resistance. 
  Max circuit rating: 5VDC, 20mA. 
  Actuation force: 10-100g. 
  Turn key solution. 
 

Touch Panel

Herald Datanetics Limited

The TDSB630755C050ON is a digital temperature probe with Maxim Integrated DS18B20 sensor. It is a popular and widely used digital temperature sensor with 1-Wire communication with the host device. The DS18B20 is known for its simplicity, accuracy, and ease of use, making it suitable for various applications.  The DS18B20 temperature probe utilizes a digital temperature sensor based on a silicon integrated circuit. It is designed to provide accurate temperature measurements with a resolution of up to 12 bits, allowing for temperature readings with precision down to 0.0625 degrees Celsius.  One of the key features of the DS18B20 is its unique 1-Wire interface. This interface enables multiple DS18B20 sensors to be connected to a single data line, simplifying the wiring and reducing the number of pins required for communication. Each DS18B20 sensor has a unique 64-bit serial code, which allows for individual identification and addressing when multiple sensors are connected in a network.  The DS18B20 temperature probe operates over a wide temperature range, typically from -55 degrees Celsius to +125 degrees Celsius (-67 to +257 degrees Fahrenheit). It is capable of measuring temperatures with high accuracy, typically within ±0.5 degrees Celsius in the range of -10 to +85 degrees Celsius.  The probe is housed in a SSU316 stainless steel sheath, which provides mechanical protection and makes it suitable for use in various environments, including industrial, automotive, and outdoor applications.  The DS18B20 temperature probe communicates using the 1-Wire protocol, which allows for simple and low-cost integration with microcontrollers, microprocessors, and other digital devices. It requires only a single data line and a pull-up resistor for communication. The sensor can be powered directly from the data line using parasitic power, eliminating the need for an external power supply in some applications.  To read temperature data from the DS18B20, the host device sends specific commands and receives the temperature values in a digital format. There are software libraries and protocols available that simplify the integration of the DS18B20 into various platforms and programming languages.  Application: Home automationWeather monitoringIndustrial controlScientific research

Temperature Probe - Digital

Peace Target Ltd

Universal Travel Adapter with Type-c &amp; 2 USB Ports includes the following features : 4 Type of folding plugs, compatible in most overseas countries such as UK/Europe/America/Australia1 Type-c output, 2 USB ports are the perfect combinationWith 100-250V wide voltage design that keeps circuit safetyUSB input: 100-250V ~ 1.0A, 50/60HzUSB output (single port): USB-A 5.0V/2.4AUSB-C: 5.0V/2.4AUSB output: 5.0V/2.4A (total)Equipped with integrated fuse for overload protection and safety valve, it will protect people from injury if they directly touch live parts on the socketBaby safety design with dustproof safe shutter, anti-single plug in, anti-electric shockCompatible with USB devices, mobile phones, speakers, headphones, digital cameras, tablets, E-book reader, power banks, music player, etc...Does not convert voltage  CE and Rohs compliantMaterial : PC housingSize closed : Length of 6.7 cm x Width of 5.4 cm x Height of 5.3 cm

Universal Travel Adapter with Type-c & 2 USB Ports

Dongguan Tianyi Electronics Co., Ltd.

 	 4x40W DSP build in amp. 	 With PC control software and Android phone control app. 	 24 bands GEQ plus 7 bands PEQ. 	 With Bluetooth and car harness wire.  

DSP Build in Amp

Foshan Nanhai Keri Electronic Co Ltd

1、Housing ：Material：SUS304 size：255*88.35*27.5 2、Water Level Sensor：H: 20mm，capacitor induction Ball shape 3、Power Indicator：Ø 5 Red LED ，Silicone seal( It is on after the machine being powered) 4、Ceramic Disc： Dimension：Ø20 Frequency：1.7MHz Surface treatment: glass glaze 5、Wire： Inner wire：Red/White；OD=Ø2.2mm; 〔(40/0.18)*2C〕*1C Wrapping：Black；OD=Ø6.2mm  length：1500±50mm  Advantages: 1. The unique formula of atomizing tablet has a service life of 7000 hours; 2. Integrated oscillation circuit, anti-interference and efficient heat dissipation; 3. Integrated IC capacitive water shortage protection switch, safe without dry burning. 

Atomizing plate M1009-2

1、Housing ：Material：SUS304 size：255*8835*27.5 2、Water Level Sensor：H: 20mm，capacitor induction Ball shape 3、Power Indicator：Ø 5 Red LED ，Silicone seal( It is on after the machine being powered) 4、Ceramic Disc： Dimension：Ø20 Frequency：1.7MHz Surface treatment: glass glaze 5、Wire： Inner wire：Red/White；OD=Ø2.2mm; 〔(40/0.18)*2C〕*1C Wrapping：Black；OD=Ø6.2mm  length：1500±50mm  1. With patent know-how ceramic disc formula ,guarantee 7000hrs long life-span.2. Integrated oscillator circuit design, anti-interference, settle heat dissipation.3. Integrated IC capacitive water shortage protection switch, ensure safety not dry-burn. 

Atomizing plate M1007-2

Shenzhen Southking Technology Co Ltd

SK-LP008 10000mAh car jump starter is your reliable roadside emergency helper, solving common vehicle starting troubles including battery loss, aged battery, dead battery, insufficient power in cold weather and long-time idle vehicles. It delivers 400A starting current and 800A peak current to quickly revive your dead 12V vehicle battery. Adopted Lithium Cobalt (LiCoO2) battery with 60C high discharge rate, this jump starter works reliably under extreme temperature range of -20°C ~70°C. Built-in multi-port output design supports charging more than 3 devices at the same time. It features EC5 jump start port, 5V/2.1A USB output and PD Type-C port (5V/3A,9V/12V/15V-2A), which can power laptops, tablets, mobile phones, earbuds, game consoles and other portable electronics. Real-time LED digital display clearly shows remaining battery level. Built-in LED flashlight offers 3 lighting modes: steady bright, emergency strobe and SOS rescue signal. Perfect for night roadside repair, camping, night riding and outdoor emergency rescue. 6 full safety protection systems are integrated: overcharge, over-discharge, high temperature, reverse polarity, anti-charge and short-circuit protection, effectively prevent damage caused by misoperation. The unit will automatically enter sleep mode after 15 seconds of inactivity to conserve battery. Rugged anti-slip shell design provides good shock resistance. Simple 3-step operation, anyone can jump start the car easily. Complete package includes jump starter main unit, smart jumper cable, user manual, Type-C charging cable and durable EVA storage bag. ItemParameterCapacity10000mAh, 60CBattery TypeLithium Cobalt (LiCoO₂)Dimension160*90*35 MMStarting Current400A (&lt;3S)Peak Current800AType-C PD Input5V/3A,9V/12V/15V-2AUSB Output5V/2.1AFull Charging Time3.5 HoursWeight0.97 KGOperating Temperature-20℃ ~ 70℃Cycle Life＜1000 cyclesLED LightingSteady bright / SOS / StrobeSleep ModeAuto sleep after 15 seconds of no operation

New design 10000mAh capacity jump starter

Cixi Fenry Electrical Appliances Co., Ltd.

●1.5Kw Ceramic fan heater
●Off/Warm/Hot
●Integrated overheat protection
●ABS plastic housing
●150m cable with plug
●Indicator light
●Tilt circuit breaker
●DC motor for lower noise
●Slim&amp;New model
●Unit size:165x95x215mm
●Certi:CE/GS/EMC/RoHS/SAA/ETL

Ceramic Heater, with ERP approval

SUPERNIC LTD

Highlighted is a radio with a clock function.&nbsp;This clock&nbsp;radio&nbsp;is AC-power operated. Designed with a low-power integrated circuit, this digital clock radio ensures&nbsp;lasting performance.&nbsp;&nbsp; 	 12 bands design. 	 Durable construction.  

Digital Clock Radio

Fenghua (Hong Kong) Electronics Ltd.

The chip capacitor features&nbsp;a single-layer or multilayer monolithic capacitor constructed in a chip form, with metallized terminations to facilitate direct bonding on hybrid integrated circuits. The chip capacitor comes with excellent solderability and resistance to soldering heat. It is suitable for flow and reflow soldering.
 
  Wide capacity range. 
  Low inductance of capacitor for high-frequency application. 
  Available in different sizes. 
 

Chip Capacitor

This multi-functional 16000mAh LiFePO4 jump starter is your reliable emergency helper for vehicle breakdowns. It delivers 600A starting current and 1200A peak current, capable of starting all 12V vehicles up to 10.0L, including cars, SUVs, motorcycles, yachts, snowmobiles and lawn mowers. Built with LiFePO4 battery, it supports over 1000 charge cycles and performs stably under extreme temperatures from -20°C to 70°C. Equipped with multiple output ports, it can charge more than 3 electronic devices simultaneously. Dual 5V/2.1A USB ports and Type-C PD port (5/9/12/15/20V-3A) power laptops, tablets, mobile phones, earbuds and small fans anytime. Real-time LED digital display shows remaining power clearly. Integrated LED flashlight features 3 modes: steady bright light, emergency strobe and SOS rescue signal, ideal for night roadside repairs, camping and outdoor emergency rescue. 6 comprehensive safety protections are built in: overcharge, over-discharge, high temperature, reverse polarity, anti-charge and short-circuit protection, to avoid risks caused by misoperation. The unit will automatically enter sleep mode after 15 seconds of inactivity to save battery power. Compact and lightweight at only 0.55kg, it is easy to carry. Simple 4-step operation, anyone can jump start a dead car battery quickly. Complete package includes jump starter host, smart jumper cable, user manual, Type-C charging cable and durable storage bag. ItemParameterCapacity16000mAh / 59.2WhBattery TypeLiFePO4Dimension176*87*37 MMStarting Current600A (&lt;2S)Peak Current1200AType-C Input5/9/12/15/20V-3AType-C Output5/9/12/15/20V-3AUSB Output5V/2.1A ×2Charging Time4 hours with 110V wall chargerWeight0.55 KGOperating Temperature-20℃ ~ 70℃Cycle Life＞1000 cyclesLED LightingSteady bright / SOS / StrobeSleep ModeAuto sleep after 15 seconds of no operation

Multi-Functional 12V Car Emergency Jump Starter

Mecca Electronics Co Ltd

This is a sample OEM product of SMT production. Components are assembled and mounted onto the surface of printed circuit boards to made electronic circuits according to customer requirement. This kind of product can be applied to various type of electronics.   OEM only  Include circuit testing and automatic optical inspection  RoHS & WEEE compliance   

SMT Production

The SK-JP30N-24v heavy-duty 24V truck jump starter is engineered for large vehicles up to 16L, delivering instant power to revive dead vehicle batteries in seconds. It is capable of starting 8.0L gasoline engines and 5.0L diesel engines, compatible with motorcycles, passenger cars, SUVs, small trucks, diesel lorries, yachts and all vehicles under 24V on the market. It resolves most common starting failures: battery loss, damaged batteries, aged batteries, fully dead batteries, insufficient power in frigid weather, and vehicles left idle for a long time. Built with premium lithium cobalt-ion battery, this 64000mAh / 236.8Wh power unit performs reliably under extreme temperatures from -20°C to 70°C. It outputs 1500A starting current (within 2 seconds) and 5000A peak current for powerful jump-start performance. This unit comes with rich multi-output ports for versatile power supply: dual 5V/2.1A USB ports, PD3.0 30W Type-C port, dual 12V auxiliary DC ports and cigarette lighter 12V/4A output, plus AC output for 100~230V mains power, supporting multiple devices to charge at the same time. Equipped with 48 LED work lights featuring 3 lighting modes: steady flashlight, emergency strobe and SOS rescue signal, ideal for roadside breakdown repairs, off-road trips, camping and night emergency rescue. Comprehensive multi-layer safety protection system including overcharge, over-discharge, high-temperature, reverse polarity, short-circuit and anti-charge protection to guard against misoperation and short-circuit risks. The digital LED display clearly shows remaining power. It automatically enters sleep mode after 15 seconds of inactivity to conserve battery capacity. Simple 3-step operation allows anyone to safely jump start vehicles. Compact rugged housing with integrated carry handle for easy transport, an essential emergency rescue tool for truck fleets, construction teams and long-haul drivers. ItemParameterModelSK-JP30NCapacity64000mAh / 236.8WhBattery TypeLithium-Ion CobaltDimension274*110*270 MMStarting Current1500A (&lt;2S)Peak Current5000AWeight5.06 KGOutput Ports2×USB:5Vdc 2.1A 2×12Vdc Aux Port:10A 1×USB-C PD3.0 30WCigarette Lighter Output12V /4AAC Output100/110/120/127/220/230V, AC ±10%, 50/60HzOperating Temperature-20℃ ~ 70℃Cycle Life＞5000 cyclesLED Light48 LED lights, 3 modes: Flashlight / Emergency Strobe / SOSSleep ModeAuto sleep mode after 15s of no operation

 24V large-capacity heavy-duty truck emergency starting power supply with battery clip, LED, mobile device charging function

The SK-JP60N heavy-duty truck jump starter is a powerful 12V &amp; 24V dual-voltage emergency starting power source built for large vehicles. It can jump-start dead batteries in seconds, perfectly suited for gasoline and diesel trucks, heavy machinery, engineering vehicles, trailers and more. It solves common vehicle starting troubles including battery depletion, damaged/aged batteries, dead batteries, low power in cold weather, and vehicles parked idle for extended periods. Boasting a huge 80000mAh /296Wh capacity, this unit delivers outstanding starting performance: 3000A starting current &amp; 15000A peak current under 12V mode; 2000A starting current &amp; 6000A peak current under 24V mode. It works reliably in extreme environments from -20°C up to 80°C. Equipped with abundant multi-output ports, it can charge 8-9 electronic devices simultaneously. It features 2×USB QC3.0 ports, 2×Type-C ports(max 30W), dual DC output ports and 12-16.8V cigarette lighter output, meeting charging needs for laptops, mobile phones, power tools and other equipment on road trips or worksites. The built-in 48-LED floodlight supports 3 lighting modes: steady illumination, emergency strobe and SOS rescue signal, ideal for roadside breakdown repairs, off-road camping and emergency rescue at night. Multiple comprehensive safety protections are integrated: overcharge, over-discharge, over-temperature, reverse polarity, short-circuit and anti-charge protection, effectively preventing risks caused by mis-operation. The digital LED display clearly shows power status. It automatically enters sleep mode after 15 seconds of inactivity to conserve battery energy. Rugged heavy-duty housing with portable carry handle for easy transport. Simple 3-step operation makes jump starting easy for everyone. This heavy-duty jump booster is the must-have emergency rescue tool for truck drivers, fleets, mining, construction and off-road teams. ItemParameterModelSK-JP60NBattery TypeLithium-ion CobaltCapacity80000mAh / 296WhStarting Current12V:3000A; 24V:2000APeak Current12V:15000A; 24V:6000ADimensions356*128*418MMNet Weight8.35KGDC Input18V/2AType-C Input &amp; Output5V/9V/12V/15V/20V, Max 30WUSB Output ×23.7-12V Max 18W, QC3.0Type-C Output ×25V/9V/12V/15V/20V, Max 30WDC Output ×212-16.8V/4ACigarette Lighter Output12-16.8V/10AOperating Temperature-20℃ ~ 80℃Cycle Life＞1000 cyclesLED Light48 LED lights, 3 modes: Steady / Strobe / SOSSleep ModeAuto sleep after 15s without operation

12v/24v 80000mAh Heavy duty jump booster for big truck

Goldsun Electronics Co., Ltd.

   The integrated circuit voice network provides the ideal receive and the transmit signal level.   The hi-impedence monitor will not disturb data, conversation or signaling.   Durable cloth covered cord equipped with securely anchored strain relief and modular RJ11X plug.   The test set is water resistant and has two five-way test clips.   The set has the function of last number redial for maximum 31 digital.   The set can store up to 15 phone numbers in repertory dialer.  

Water Resistant Lineman's Test Set

Huizhou Lirui Technology Co.,Ltd.

Redefine Driving: 12.95"Intelligent Android Car Stereo Smooth Android Operating System Enjoy rock-solid GPS signals and a stable network for seamless navigation and connectivity with the 12.95-inch Android car navigation system. Redefine your drive.  DAB+ tuner with DAB ;DAB service following ,MOT slideshow,DLS-text and comfort scan Multiple digital radio stations with tons of channels to choose from Adopt audio coding technology, signal stability Seamless integration of navigation commands with DAB   Connects two mobile phones and other devices simultaneously with extremely fast pairing and transfer speeds, secure instant calls, and seamless switching between music and navigation Fast connection, fast transfer speeds Remote control, more than two devices can be connected  Equipped with a high-performance audio processor, supporting 6-channel high-fidelity outputs Dolby Digital Surround Sound technology Multi-band graphic equalizer Active Noise Reduction Technology  Adopts 8-layer printed circuit board. Signal processing speed and stability is stronger, multi-layer design greatly improves signal stability and reduces signal interference Stable transmission of high-speed signals Multi-domain signal isolation technology  Park with confidence, drive with peace of mind, 360 panoramic image Omni-directional vision, worry-free parking, safer driving   Parameter specifications OSAndroid11RAM2+32G 4+32G 4+64G and other optionalScreenIPS /QLED screen up to ultra 2K 2000*1200 resolutionRadioFM/AM/RDS OE grade tunerWIFI5G and 2.4G dual wifi connectNavigatorGPS/GLONASS/BEIDOUAudio out4.2Channels 4V RCA outputVideo outputCVBS video outputStorage-30℃ ~ 80℃   

My Sourcing

Unfollow this supplier?

Unfollow this supplier?