Kong Lighting Technology Ltd

  Showcased here is a collection of LED modules. With a powerful and reliable light output, these LED modules are excellent components for any LED lighting. Easy to assemble.Ideal for Flashlight and latern.Promise a stable performance.Best solution for lighting designers and manufacturers.Long lifetime.Exclusive Design.

LED Module

Nantong Zhongrun Lighting Electrical Co., Ltd.

 	 LED module, non dimmable, dimmable, step dimmable 5W 400LM  

Model no. KL591 (5050RGBYIC LED)
KL591 (RGBYIC LED ) is four channels LED constant current adjustable driver IC with function of internal control synchronizing, which can achieve a wide range of display as MCU inputs one group of data set by constant current and PWM .
When input signal is disconnected, it can realize synchronized fixation of colorful pattern change and prevent in-operation of subsequent cascade chip caused by chip damage. Internal chip is integrated with MCU solidification program and single wire digital interface, data flip-latch, LED constant current driver, circuit, etc.
Internal VDD pin is integrated with 5V regulator with less peripheral devices.
Adopt power CMOS technology
5 V voltage-regulator tube is built into VDD, and the voltage supports 6-24 V after cascading the resistor
Constant current can achieve level 64 adjustment (6.5 mA-38mA)
PWM brightness controls circuit, and 256 brightness is adjustable
Accurate current output value
Single line serial concatenated port
Oscillation mode: build in RC vibration and conduct clock synchronization according to signals&nbsp; on data line. After receiving the data from this unit, it can reproduce follow-up data and send it &nbsp;to lower level through data output end, and signals will not be distorted and reduced along with cascade
Build in power on reset circuit, and after powering on reset, an registers are initialized to zero
External control mode data transmission rate is 800 KHZ
Internal control mode chip sends 1024 points of data&nbsp;
In addition to&nbsp;the existing&nbsp;16777216&nbsp;color, an additional color &quot;yellow Y&quot; has been added in&nbsp;the traditional&nbsp;RGB color,&nbsp;widening the&nbsp;entire&nbsp;gamut, makingLed&nbsp;can be more&nbsp;vividly&nbsp;yellow&nbsp;gold,&nbsp; the color is more realistic comparing with&nbsp;the traditional&nbsp;RGB RGB&nbsp;color, hence,&nbsp;the screen&nbsp;colors look&nbsp;is&nbsp;moredetails, bringing immense visual &nbsp;real color appeal,&nbsp;the quality light is available in different RGBY colors. The LED lighting product can be adopted to upgrade your existing strip lights.
Features:
Voltage: 5V, W: 0.4W
R: 620-630 nm, 2-3 lm/ 16mA
G: 515-525 nm, 6-7 lm/ 16mA
B: 460-470 nm, 1-2 lm/ 16mA
Y: 585-595 nm, 2-3 lm/ 16 mA
&nbsp;
Lens Type:&nbsp; Water Clear
Available in RGBY different colour
&nbsp;
Applications:
Upgrade to New RGBY Light LED strip light.
Applies to guardrail tube, point source and LED decorative products.&nbsp;
Full color&nbsp; Indoor/Outdoor decoration light

Material:
Package: Top SMD

&nbsp;

5050RGBY IC LED

KL592 (RGB IC) : with constant current adjustable driver IC with function of internal control synchronizing, which can achieve a wide range of display as MCU inuts one group of data set by constant current and PWM.&nbsp; 	 5 V voltage-regulator tube is built into VDD, and the voltage supports 6-24 V after cascading the resistor 	 Constant current can achieve 18 MA 	 PWM brightness controls circuit, and 256 brightness is adjustable 	 Single line serial concatenated port 	 Oscillation mode: build in RC vibration and conduct clock synchronization according to signals&nbsp; on data line. After receiving the data from this unit, it can reproduce follow-up data and send it &nbsp;to lower level through data output end, and signals will not be distorted and reduced along with cascade 	 Build in power on reset circuit, and after powering on reset, an registers are initialized to zero 	 External control mode data transmission rate is 800 KHZ 	 Internal control mode chip sends 2048 points of data  &nbsp; Benefits:  	 Comparing with&nbsp;the traditional&nbsp;RGB color, hence,&nbsp;the screen&nbsp;colors look&nbsp;is&nbsp;moredetails, bringing immense visual &nbsp;real color appeal,&nbsp;the quality light is available in different RGB colors. The LED lighting product can be adopted to upgrade your existing strip lights.  
Features:
Voltage: 5V, W: 0.3W
R: 620-630 nm, 2-2.5lm/ 18mA
G: 515-525 nm, 5-6 lm/ 18mA
B: 460-470 nm, 1-1.5 lm/ 18mA

Lens Type:&nbsp; Water Clear
Available in RGB different colour
&nbsp;
Applications:
Upgrade to New RGB Light LED strip light.
Applies to guardrail tube, point source and LED decorative products.&nbsp;
Full color&nbsp; Indoor/Outdoor decoration light

Material:
Package: Top SMD

5050RGB IC LED

Shenzhen Lingbenyang Industry Co., Ltd.

Displayed here is an LED module in a petite and concrete structure. The module is available three as a unit. Its simple design allows you to pair it up with other gadgets to create different lighting effects.
 
  Power: 12V DC. 
  Available in other designs. 
 

Pictured here is a CCT adjustable LED which is manufactured with high quality in mind. It will deliver excellent performance with a high color rendering index. Users can enjoy variable and innovative LED layout designs and combinations with the highlighted product.

Features: 	 5050 BW_WT CCT adjustable LED (2 CCT in 1 LED). 	 White light - warm light adjustable. 	 BW: 18-22 lm/ 60mA. 	 WT: 17-21 lm/ 60mA. 	 Cri: 80-90Ra. 	 Lens type: water clear. 	 Viewing angle: 120 degree.  
Applications: 	 Apply to CCT adjustable LED light. 	 For indoor or outdoor decoration. 	 Signal light engine or industrial light engine. 	 Also suitable for commercial display.  
Benefits: 	 High color rendering index. 	 Ideal for LED lighting application to avoid multi-shadows. 	 Higher heat conductivity for better thermal management. 	 Provide variable and innovative LED layout designs and combinations. 	 High lumen-performance per dollar cost.  
Material: 	 Package: top SMD. 	 Capsulated resin: silicone resin with silicate phosphor. 	 Chips: 2-chip packed in cavity.  

5050 CCT Adjustable LED 

This collection of COB chips are built with the latest technology of LED packaging. Boasting an energy-saving feature with very long life span, these will be excellent replacement for traditional light sources.   Fitted with Ceramic/ Aluminium circuit board.&nbsp;   Various types are available.&nbsp;   ​Insignificant glare.   More energy-efficient than incandescent, halogen and some fluorescent lamps.   Extremely low thermal resistance.   Lumen maintenance of greater than 70% after 50,000 hours.   Long operating life.   Low forward voltage operated.   Instant light (less than 100ns).   Lead free product.   RoHS compliant.   UV-resistant.  Applications:   Automotive interior/exterior lighting.   Automotive signal lighting.   Spot lights, down lights, high bay lights, desk lamps and more.   General torch.   Architectural lighting.   Projector light source.   Traffic signals.   Task signals.   Decorative/pathway lighting.   Remote/solar powered lighting.   Household appliances.  

COB LED Chip

Guangdong HHHLED Optoelectronic Technology Co., Ltd.

 	 Lumen: 60-65lm 	 Currency: 150mA 	 Wattage: 0.5W 	 CRI&gt;80 	 Chip size: 15*30mil  

SMD 2835 LED 60-65lm

Youlumi ( HK) Co, Ltd.

 	 40W-360W 	 MMW driver 	 5 years warranty  

LED Retrofit Kit

Optosupply Ltd

 	 Diameter (outer): 52.5mm. 	 Diameter (inner): 18.75mm. 	 LEDs: 36pcs. 	 Volts: 12-15V DC. 	 IR power on CDs auto control. 	 Color transparent type. 	 Superior UV resistance. 	 Directly use on line voltage. 	 Low power consumption, high intensity. 	 Excellent beam control. 	 Application: pickup device, monitoring devices, remote controlling.  

White LED Module

Surmountor Lighting Co Ltd

N1020C RGB LED NEON Light 24vdc, 12vdc, are avaible Model No.N1020C- 5050FRGB60IC-24VDCNameFlexible led neon lightVoltage24vdcLength5m/pcs, maximun 10m/rollLED coloraddressable RGB color Other single color are avaible to customization. Silicone tube and end caps and mounting clips are ok to offer .   

N1020  RGB led neon light 24vdc

Xuyu Optoelectronics (Shenzhen) Co., Ltd.

This is an LED module that is made of top-quality material for enhanced durability. The high-power LED light source allows superior lighting performance. This LED module boasts an extra-long service life. 	 Integrated design. 	 Power: 70W.  

Lucky Light Electronics (Asia) Co., Limited

SMD LED/Reverse Mount Chip LED  Luckylight offers an extensive range of high quality reverse mount chip LEDs which are small in size, high efficiency and low power consumption. Reverse mountable chip LEDs are for lighting the non-component side of a PCB board. In this reverse mounting configuration, this LED emits light through a small cut-out hole in the PC board.  Reverse mount chip LEDs packages are available in popular SMD 1206 and wing lead type with different feature options in size, shape, viewing angle and color combination. Colors are available in blue, green, yellow, orange and red etc. These devices are packaged in automation-friendly tape and reel to increase productivity and reduce assembly cost.  The small size, narrow footprint, and low profile make this kind of LED excellent for backlighting, status indication, and front panel illumination application. 

3.2x1.25mm SMD Chip LED Square with Flat Lens

C5050 provides the leading Chip on Ceramic type of LED technology for high efficiency solidstate&nbsp;lighting solutions. It offers excellent uniformity, flexibility and cost efficiency along with&nbsp;compact size and wide range of color selections. All components are produced by packing highperformance,&nbsp;LED chips and silicon resin with proprietary phosphors.

 Features and Benefits 
. Ideal for LED lighting application to avoid multi-shadows
. Higher heat conductivity for better thermal management
. Provide variable and innovative array LED layout designs and combinations
. Reduce the initial development cost and time
. High lumen-performance per dollar cost
. Lead free reflow solder compatible with RoHS compliant

 Dimensions and Materials 
. Dimensions: 3.45 mm x 3.45 mm
. Packages: Ceramics
. Capsulated Resin: Silicone Resin with Silicate Phosphor
. Electrodes: Ag Plating
. Chips: 1 chip packed in a cavity in single cup

 Applications 
. Solid State Lighting
. Indoor/Outdoor/Decoration
. Signal Light Engine
. Commercial Display
. Industrial Light Engine

C5050 Ceramic White Light LED 

1. Sourced by high output SMD2835, good color conformity and no spot.
2. 9.99% gold thread, pure copper bracket coated with silver.
3. SDCM less than 5 each BIN.
4. Special lens design, 170&deg;beaming angle with even light.
5. 30/50 pcs Max.(constant current) /20 pcs Max.(constant voltage) in a series connection.
6. CE, ROHS and UL certified.
7. Overmoulded: anti-dusting, anti-moisture, waterproof, anti-shock.
8. Constant current driving technology guarantees stable performance of product.
9. Color:&nbsp;​W.R.G.B

Backlit LED Module

3216 Reverse Mount Chip LED with Lens

COB light source special-shaped COB-CL5029-BW flip chip

The bi-color SMD LEDs are available in a wide range of color combinations. The tri-color SMD LEDs provide the freedom to achieve any combination of colors by mixing the 3 primary colors, which yields a wide variety of colors to suit every application and product theme. These products use the industry standard footprint with top-mount, reverse-mount, and right angle-mount packaging options, and frame type choices including PLCC LED (reflector) and Chip LEDs (PCB). 

Bi-Color SMD Chip LEDs

Diameter (outer): 44mm&nbsp;
LEDs: 18pcs&nbsp;
850nm or 940nm&nbsp;
Each LED watts: 0.12W&nbsp;
Total Watts:1.6W&nbsp;
Volts: 12-15Volts DC&nbsp;
For CCTV camera, IR camera

LED Modules

Shibakawa (Hong Kong) Ltd

We are Japanese company, we have Moulding machine production lines in Zhuhai city China &amp; Thailand factory, we can do one-stop service from tooling, moulding injection, SMT mounting, parts assemble, etc., it can be for the different business market, such as electronic of the home appliance, computer, hot water machine, automatic water tap, communication product, OA machine, CCTV, automotive, etc.  Moreover, we can suggest an idea according to customer's design and scheme.We design a best assemble and inspecting processing according to produce quantity and inspecting spec.The pictures are LED flash for camera or mobile phone or CCTV.We can specially separate to moulding injection for transparent parts if needing.We have 30 to 180tons of moulding machines, SMT machines, reflow machines, soldering machines, AOI machines in China and Thailand factories.In addition, we have CELL style to different processing in mass production from few semi-parts to products in the factories.If you have any inquiries, please contact us. 

OEM Camera Lens Moulding & Assemble with PCB for LED Flash

Outstanding Brightness 3216 SMD Chip LED with Lens

Voltage Detector LED, which is designed for detecting the voltage at the specified value.&nbsp;
There is no extra circuit needed for this new LED which has all in one function to simplify product design &amp; cost saving, it can be widely used for voltage monitor and battery case etc.&nbsp;

●Current consumption is low
●All in one function to simplify product design
●Detector Voltage:&nbsp;2.7V; 2.9V; 3.3V; 3.6V; 3.9V; 4.2V Typ.

Voltage Detector LED

Luckylight offers an extensive range of high quality Single color chip LED which are small size, high efficiency and low power consumption.  Single color chip LED products are available in standard and high brightness colors. We adopt our proven AlGaAs, AlInGaP and InGaN technology and provide the broadest range of colors from well-known LED chip suppliers. These products use the industry standard footprint, with top-mount, reverse-mount, and right angle-mount packaging options. We offer lights with such colors like and color choices include green, red, yellow, white, blue and orange.  Single color chip LEDs are used in a variety of applications including automotive interior and indication lighting, LCD and push button backlighting, white goods and appliances, industrial measurement and control systems, and for symbol lighting and status indication in computer peripherals and consumer goods.  Low power consumption, small size and easy assembly make the Chip LED ideal for backlighting smartphone handsets as well as backlighting industrial displays. 

Single Color SMD Chip LEDs

SMD LED/White SMD LED  Luckylight offers an extensive range of high quality White SMD LEDs which are small in size, high efficiency and low power consumption.  White SMD LED products are divided into Chip LEDs (PCB) and PLCC LEDs (reflector) configurations. These products use the industry standard footprint with top-mount, reverse-mount, and right angle-mount packaging options, and white ranges choice including cool white, neutral white and warm white, and color temperature range from 2600K to 11000K. Customized color temperature is available.  White SMD Chip LEDs products include 0402 series, 0603 series, 0805 series, 1206 series, Wing Lead series, etc. White SMD chip LEDs are used in a variety of applications including automotive interior and status indication, LCD and push button backlighting, white goods and appliances, industrial measurement and control systems, and for symbol lighting and status indication in computer peripherals and consumer goods.  White SMD PLCC LEDs products include V020 series, V335 series, R3014 series, R2835 series, R5730 series and R5050 series, etc. White SMD PLCC LEDs are perfectly suited for a variety of cross-industrial applications due to its small package outline, durability and superior brightness. Its versatility and reliability make it a preferred choice for automotive interior lighting specifically as instrumentation panel, central console and cabin backlighting. Besides, Top view PLCC LED combines performance and innovation effectively, making it a perfect choice for office automation, home applications, various decorations lighting, 

My Sourcing

Unfollow the following supplier?

Unfollow the following supplier?