Chung Pak Battery Works Ltd

  This zinc module comes with low content of harmful impurity to meet   the international environmental protection requirements. The stable chemical components and moderate hardness allow the item to be flexible to shape. This metal module has a high squeezing usability rate.    
 
   Accurate and stable measurements.    
   Long storage period.    
   Material: zinc.  
 

Zinc Module

Yuilley Building Materials Co Ltd

   No sanding, dust-free application.   Completely dry within 20 minutes   Gypsum synthetic-based.   Flastsetting plaster.   To close joints of gypsum plasterboards without tapes.   Harderns continuously at every layer thickness.   Does not collapse.   Remains crack-free.   Non-combustible building materials.  

Super Wall Filling Compound (Germany)

   Zinc calot and zinc strip coil.   Stable chemical component.   Moderate hardness.   Great quality.   Long storage period.   Good for manufacturing batteries.  

Zinc Strip Coil

 	 Creates a pocket of constantly circulating air which inhibits mold growth. 	 IIC rating of 68, STC rating of 67, R-Value of 0.39 	 Seals out moisture to protect flooring 	 Superior sound supression between] 	 Corrects minor subfloor imperfections 	 Includes adhesive strip and 4in. overlap film for linking multiple rolls. 	 70-102-1 (630 sq.ft.roll-40&quot; X 189&#39;) 1/cs 	 70-102-12 (100 sq.ft roll - 40&quot; X 30&#39; ) 12/cs  

Underlayment

Optosupply Ltd

 	 1608 chip LED mounted with copper wire 250mm&nbsp; 	 Available in all colors&nbsp; 	 Low current operation 5mA  

1608 Chip LED with Wire

Promotive Ind'l Co Ltd

  silver plate , nickel plate , Tin plate ,gold plate are available  RoHS compliant  

Metal parts

Magfull Int'l (Ind) Ltd

NdFeB (Neodymium-Iron-Boron) magnet is used most popular by people in the industry and our daily life, because it has superior magnetic properties than other kinds of magnetsThe outstanding characteristics are as follows Higher unit magnetic properties than other magnet and assure you of smaller size and lighter weight in designing devicesBeing mostly an iron-based alloy, NdFeB type rare earth magnet is much more prone to surface oxidation or rust. To eliminate such a problem, the user should consider magnet coating, plating, or suitable surface treatmentBeing less prone to chipping during handingLower temperature coefficient of magnetic properties than ceramic but higher than SmCo type rare earth magnetTherefore, this NdFeB type rare earth magnet will suffer irreversible loss at high temperatureThe permanent magnets, which are called the next centurial magnets, are used in a wide range of industries including computers, automobiles, electric machinery, electro-sound devices, automatic control, magnetic force mechanism, microwave communication, petrochemical industry, medical apparatus, and equipment.The magnets are the ideal materials for the subminiature magnetic devices with high function.NdFeB magnets is especially suitable for developing those new products demanding high quality, small volume and light weight.

NdFeB Magnet

Artificial rubber mixed with iron powder.No magnetism.Can be attracted by magnets.Good for sealing the magnetism of magnets.Rectangular shaped sheets.Solid colored surface.Soft and flexible structure.Can be used for magnetic dart boards or any other toys and stationery.

Iron Rubber Sheet

 	 In shape of round, rectangular or regular magnet shape. 	 Magnets are suitable for use in instrument, meter, micro-motor, etc. 	 They can also be used in electro-acoustic device, microwave device and magnetic drive unit. 	 Different shapes, sizes and colors are available.  

Magnet

   It is a special formulated plaster to be used for jointing gypsum boards, hiding screw and nail heads, repairing cracks, as well as preparing lining surface before final painting and decoration for all kinds of surface.   Working time: 45 minutes.   Mixing Ratio (Volume of plaster : Water) 2.5-3.0 : 1.0   Approximate Coverage : 2.6sq.m/kg   Contained Volume : Paper Size 20kg/bag   Storage Method: Keep in a dry place without high humidity condition and direct exposure to heat or sunlight.   Product's shelf life ; 8 months   Easy to work ; Extra-fine compound results in ease of application.&nbsp; Plastering can be applied to all kinds of surface (jointing tape, or on other accessories such as metal angle bead.&nbsp;super bead or edge bead), smoothly and easily.Allow to set dry and then lightly sand to smooth uneven surface.   No Cracking : Crack Free Lining Surface ready for final decoration.  

Joint Filler/Finish45

	Ferrite(Ceramic) Magnet is manufactured from oxide materials using powder metallurgical process. Ceramic magnet is most widely used because of its low cost, high-energy, good electric insulation and excellent resistance to demagnetization.	The most common type of ceramic magnets are anisotropic strontium, anisotropic barium and isotropic barium magnet.	Ferrite (Ceramic) Magnets are essentially composed of oxide materials with Barium Carbonate or Strontium Carbonate, manufactured under a powder metallurgical process.	The feature of low recoil permeability, along with the high coercive force, makes them highly resistant to demagnetizing fields. In addition, their relatively low specific density and economical cost are also very attractive to the magnet designers.	When designing the ferrite magnets for a particular application, primary consideration should be given to its shape limitation due to the powder metallurgical manufacturing process and the temperature dependence of ferrite materials.	Ferrite Magnets has good anti-corrosion performance, no surface treatment needed. There are two manufacturing process for ferrite magnets:	Dry Process &amp; Wet Process. By dry process, can produce isotropic &amp; anisotropic magnets; by wet process, only anisotropic magnets can be produced. Isotropic ferrite magnets are not oriented and can be magnetized in any direction; anisotropic ferrite magnets are different, they are all oriented in the manufacturing direction, and should be magnetized in the direction of orientation.	For dry process, the tool can be changed and developed easily, while for wet process, it is complicated to change the tool and the tooling charge is much higher.	At present, we have put our emphasis on arc segment magnets for electric motors, disc magnets and block magnets for special applications.

Ferrite Magnet

NdFeB magnet white PTFE (Teflon) coating.The Teflon coating with option of white, grey white, black and grey. Sintered neodymium (NdFeB) magnet.Available from N30 to N54, N30H to N40H, N30SH, N35SH and so on.Durable metallic structure.Superior magnetic property.Versatile and practical.Suitable for application for high performance, miniaturization and less energy consumption.Also suitable for stationery and toy use.Widely used in aerospace, aircrafts, automobiles, electronics and so on.Available in various shapes.

NdFeB Magnet with Teflon Coating

   Fibreglass in roll form.   Sound absorption (Resistant).   Size: 1.2 X 15 m (25mm thick).   1.2 X 15 m (50mm thick).  

Fibreglass

SmCo magnetsSamarium Cobalt holds its standard property in higher maximum temperatures than neodymium, although its maximum strength is less. The cost of SmCo material is the most expensive, so SmCo is recommended only when its performance is a high-temperature environment is a concern.Characteristics &amp; Application of SmCo Permanent Magnet:SmCo permanent magnet has high magnetic energy product and high coercive force. Its properties are better than Alnico, ferrite permanent magnet. Its max. energy product is up to 239kJ/m3 (30MGOe), which is three times of that of Alnico8 permanent magnet, eight times of that of ferrite permanent magnet (Y40). So the permanent magnetic component made from SmCo material is small, light and stable in property. It is widely applied to electro acoustic&amp; telecommunication apparatus, electric motors, measure meters, peg-top, electronic watch, microwave apparatus, magnetic mechanism, sensor and other static or dynamic magnetic routes.The curie temp. of the SmCo permanent magnet is high and its temperature coefficient is low. So it is suitable for use at 300, high temp.SmCo permanent magnet is hear and bristle. Its rigidity strength, tensile strength and press strength are low. So it is not suitable for framework. The main ingredient of SmCo permanent magnet is metal cobalt (Co≥Y99.95%). So its price is high.

Sm-Co Magnet

   8' long.   High quality product with resonable price.  

Gypsum Board Accessories

	Plastic and rubber magnets are made of bonded ferrite magnet powder and other materials.	Anisotropic and isotropic rubber magnet available.	Thickness of rubber magnet is available in maximum 0.15mm.	Width of rubber magnet is available in maximum 800 mm.	Solid colored surface.	Soft and flexible texture.	Strong magnetism.	Rubber magnets are available in different shapes such as strip, coil, sheet, and other shapes.	Widely used in micro-motor, fridge, disinfecting cupboard, toy, stationery, print and so on.	Various colors are available.

Rubber Magnet

Anisotropic ferrite magnet, isotropic ferrite magnet and cutting ferrite magnet are availableBonded ferrite magnet and bonded ferrite magnet are also availableThe raw material of sintered ferrite magnet is oxide, so ferrite magnets will not rustedThe isotropic ferrite magnets can be magnetized in many different directions or in multi-polesThe anisotropic ferrite magnets have better magnetic performance compare with isotropicThe anisotropic ferrite magnets can only be magnetized along a certain directionThe ferrite magnets are suitable used in instrument, meter, electro-acoustic device and micro motorThe ferrite magnets are also suitable for duplicating machine, following machine and stationery use

Ferrite Ring Magnet

Ferrite (Ceramic) Magnet is manufactured from oxide materials using powder metallurgical process. Ceramic magnet is most widely used because of its low cost, high-energy, good electric insulation and excellent resistance to demagnetization.  The most common type of ceramic magnets are anisotropic strontium, anisotropic barium and isotropic barium magnet.  Ferrite (Ceramic) Magnets are essentially composed of oxide materials with Barium Carbonate or Strontium Carbonate, manufactured under a powder metallurgical process.  The feature of low recoil permeability, along with the high coercive force, makes them highly resistant to demagnetizing fields. In addition, their relatively low specific density and economical cost are also very attractive to the magnet designers.  When designing the ferrite magnets for a particular application, primary consideration should be given to its shape limitation due to the powder metallurgical manufacturing process and the temperature dependence of ferrite materials.  Ferrite Magnets has good anti-corrosion performance, no surface treatment needed. There are two manufacturing process for ferrite magnets: Dry Process &amp; Wet Process. By dry process, can produce isotropic &amp; anisotropic magnets; by wet process, only anisotropic magnets can be produced. Isotropic ferrite magnets are not oriented and can be magnetized in any direction; anisotropic ferrite magnets are different, they are all oriented in the manufacturing direction, and should be magnetized in the direction of orientation.  For dry process, the tool can be changed and developed easily, while for wet process, it is complicated to change the tool and the tooling charge is much higher.  At present, we have put our emphasis on arc segment magnets for electric motors, disc magnets and block magnets for special applications. 

Gypsum Board Accessories(Cover Bean)

	Ferrite (Ceramic) Magnet is manufactured from oxide materials using powder metallurgical process. Ceramic magnet is most widely used because of its low cost, high-energy, good electric insulation and excellent resistance to demagnetization.	The most common type of ceramic magnets are anisotropic strontium, anisotropic barium and isotropic barium magnet.	Ferrite (Ceramic) Magnets are essentially composed of oxide materials with Barium Carbonate or Strontium Carbonate, manufactured under a powder metallurgical process.	The feature of low recoil permeability, along with the high coercive force, makes them highly resistant to demagnetizing fields. In addition, their relatively low specific density and economical cost are also very attractive to the magnet designers.	When designing the ferrite magnets for a particular application, primary consideration should be given to its shape limitation due to the powder metallurgical manufacturing process and the temperature dependence of ferrite materials.	Ferrite Magnets has good anti-corrosion performance, no surface treatment needed. There are two manufacturing process for ferrite magnets:	Dry Process &amp; Wet Process. By dry process, can produce isotropic &amp; anisotropic magnets; by wet process, only anisotropic magnets can be produced. Isotropic ferrite magnets are not oriented and can be magnetized in any direction; anisotropic ferrite magnets are different, they are all oriented in the manufacturing direction, and should be magnetized in the direction of orientation.	For dry process, the tool can be changed and developed easily, while for wet process, it is complicated to change the tool and the tooling charge is much higher.	At present, we have put our emphasis on arc segment magnets for electric motors, disc magnets and block magnets for special applications.

   Furring channel and carrying channel.   8'&nbsp; and 10' long.  

Furring Channel and Carrying Channel

Sintered neodymium (NdFeB) magnet.Available from N30 to N54, N30H to N40H, N30SH, N35SH and so on.Durable metallic structure.Superior magnetic property.Versatile and practical.Suitable for application for high performance, miniaturization and less energy consumption.Also suitable for stationery and toy use.Widely used in aerospace, aircrafts, automobiles, electronics and so on.Available in various shapes.

Disc NdFeB Magnet

SmCo magnets	Samarium Cobalt holds its standard property in higher maximum temperatures than neodymium, although its maximum strength is less. The cost of SmCo material is the most expensive, so SmCo is recommended only when its performance is a high-temperature environment is a concern.Characteristics &amp; application of SmCo permanent magnet:	SmCo permanent magnet has a high magnetic energy product and high coercive force. Its properties are better than Alnico, ferrite permanent magnet. Its max. the energy product is up to 239kJ/m3(30MGOe), which is three times of that of Alnico8 permanent magnet, eight times of that of ferrite permanent magnet (Y40).	So the permanent magnetic component made from SmCo material is small, light and stable in the property.	It is widely applied to electro acoustic&amp; telecommunication apparatus, electric motors, measure meters, peg-top, electronic watch, microwave apparatus, magnetic mechanism, sensor and other static or dynamic magnetic routes.	The curie temp. of the SmCo permanent magnet is high and its temp. Coeff. is low. So it is suitable for use at 300, high temp.	SmCo permanent magnet is heard and bristle. Its rigidity strength, tensile strength and press strength are low. So it is not suitable for the framework. The main ingredient of SmCo permanent magnet is metal cobalt(Co≥Y99.95%). So its price is high.

My Sourcing

Unfollow the following supplier?

Unfollow the following supplier?