Guangdong South HongMing (HK) Electronic Science & Technology Co Ltd

STANDARD ATMOSPHERIC CONDITIONS FOR MAKING MEASUREMENTS AMBIENT TEMPERATURE : 15oC to 35oC(If there is any doubt on the results, the measurements shall be made at +20 +/- 5oC.)RELATIVE HUMIDITY (R.H.) : 45% to 75% (If there is any doubt on the results, the measurements shall be made at 60% to 70%.)AIR PRESSURE : 86 kpa to 106 kpa.OPERATING TEMPERATURE RANGE : -40oC to +105oC for which the capacitor can be operated continuously at rated voltage.ELECTRICAL CHARACTERISTICS Withstand Voltage (TV) : Between Terminals, Apply 150% of rated voltage for 60 sec., or 175% of rated voltage for 1~5 sec. at +20 +/- 5oC.The charging current must be &lt;= 1 Amp. Between Terminals &amp; Enclosure, Apply 200% of rated voltage for 2 to 5 sec.Insulation Resistance (I.R.) : &gt;= 7,500 MOhm (C &lt;= 0.33 uF), &gt;= 2,500 MOhm*uF/C (C &gt; 0.33 uF) Apply Vt +/- 15% for 60 +/- 5 sec. at +20 +/- 5oC. Vt = 50 VDC if rated voltage &lt;= 100 VDC; Vt = 100 VDC if 100 VDC &lt; rated voltage &lt;= 500 VDC; Vt = 500 VDC if rated voltage &gt; 500 VDC.Capacitance (CAP) : Within the tolerance specified. (at +20 +/- 5oC).Measuring Frequency : 1 KHz +/- 10%.Measuring Voltage : &lt;= 1 Vrms.max.Dissipation Factor (DF) : &lt;= 0.010 (1.0%) at 1 KHz. Measuring Frequency : 1KHz+/- 10% Measuring Voltage : &lt;= 1 Vrms.max.Connection of Element : Shall be no open nor short-circuiting. The connection shall be stable. DF shall be &lt;= 0.010 (1.0%) at 1 KHz. Apply 200% of rated voltage for 10 times.Solderability : More than 90% of circumferential surface of lead wire shall be covered with new solder.Testing method per IEC 68-2-20 Ta. Soldering temperature : +260 +/- 5oC.Immersion duration : 2 +/- 0.5 secs 

MOV 14D102K

MOV 10D431K

STANDARD ATMOSPHERIC CONDITIONS FOR MAKING MEASUREMENTS	AMBIENT TEMPERATURE : 15oC to 35oC(If there is any doubt on the results, the measurements shall be made at +20 +/- 5oC.)	RELATIVE HUMIDITY (R.H.) : 45% to 75% (If there is any doubt on the results, the measurements shall be made at 60% to 70%.)	AIR PRESSURE : 86 kpa to 106 kpa.	OPERATING TEMPERATURE RANGE : -40oC to +105oC for which the capacitor can be operated continuously at rated voltage.ELECTRICAL CHARACTERISTICS	Withstand Voltage (TV) :Between Terminals, Apply 150% of rated voltage for 60 sec., or 175% of rated voltage for 1~5 sec. at +20 +/- 5oC.The charging current must be &lt;= 1 Amp.Between Terminals &amp; Enclosure, Apply 200% of rated voltage for 2 to 5 sec.	Insulation Resistance (I.R.) : &gt;= 7,500 MOhm (C &lt;= 0.33 uF), &gt;= 2,500 MOhm*uF/C (C &gt; 0.33 uF) Apply Vt +/- 15% for 60 +/- 5 sec. at +20 +/- 5oC. Vt = 50 VDC if rated voltage &lt;= 100 VDC; Vt = 100 VDC if 100 VDC &lt; rated voltage &lt;= 500 VDC; Vt = 500 VDC if rated voltage &gt; 500 VDC.	Capacitance (CAP) : Within the tolerance specified. (at +20 +/- 5oC).	Measuring Frequency : 1 KHz +/- 10%.Measuring Voltage : &lt;= 1 Vrms.max.	Dissipation Factor (DF) : &lt;= 0.010 (1.0%) at 1 KHz. Measuring Frequency : 1KHz+/- 10% Measuring Voltage : &lt;= 1 Vrms.max.	Connection of Element : Shall be no open nor short-circuiting. The connection shall be stable. DF shall be &lt;= 0.010 (1.0%) at 1 KHz. Apply 200% of rated voltage for 10 times.	Solderability : More than 90% of circumferential surface of lead wire shall be covered with new solder.	Testing method per IEC 68-2-20 Ta. Soldering temperature : +260 +/- 5oC.	Immersion duration : 2 +/- 0.5 secs

MOV 20D821KJ

MOV 10D331K

 STANDARD ATMOSPHERIC CONDITIONS FOR MAKING MEASUREMENTS  	 AMBIENT TEMPERATURE : 15oC to 35oC(If there is any doubt on the results, the measurements shall be made at +20 +/- 5oC.) 	 RELATIVE HUMIDITY (R.H.) : 45% to 75% (If there is any doubt on the results, the measurements shall be made at 60% to 70%.) 	 AIR PRESSURE : &nbsp;86 kpa to 106 kpa. 	 OPERATING TEMPERATURE RANGE : -40oC to +105oC for which the capacitor can be operated continuously at rated voltage.    ELECTRICAL CHARACTERISTICS   	 Withstand Voltage (TV) :&nbsp;&nbsp;Between Terminals, Apply 150% of rated voltage for 60 sec., or 175% of rated voltage for 1~5 sec. at +20 +/- 5oC.The charging current must be &lt;= 1 Amp.&nbsp;Between Terminals &amp; Enclosure, Apply 200% of rated voltage for 2 to 5 sec. 	 Insulation Resistance (I.R.) : &gt;= 7,500 MOhm (C &lt;= 0.33 uF), &nbsp;&gt;= 2,500 MOhm*uF/C (C &gt; 0.33 uF) Apply Vt +/- 15% for 60 +/- 5 sec. at +20 +/- 5oC. Vt = 50 VDC if rated voltage &lt;= 100 VDC; Vt = 100 VDC if 100 VDC &lt; rated voltage &lt;= 500 VDC; Vt = 500 VDC if rated voltage &gt; 500 VDC. 	 Capacitance (CAP) : Within the tolerance specified. (at +20 +/- 5oC).&nbsp; 	 Measuring Frequency : 1 KHz +/- 10%.Measuring Voltage : &lt;= 1 Vrms.max. 	 Dissipation Factor (DF) : &lt;= 0.010 (1.0%) at 1 KHz. Measuring Frequency : 1KHz+/- 10% Measuring Voltage : &lt;= 1 Vrms.max. 	 Connection of Element : Shall be no open nor short-circuiting. The connection shall be stable. DF shall be &lt;= 0.010 (1.0%) at 1 KHz. Apply 200% of rated voltage for 10 times. 	 Solderability : More than 90% of circumferential surface of lead wire shall be covered with new solder. 	 Testing method per IEC 68-2-20 Ta. Soldering temperature : +260 +/- 5oC. 	 Immersion duration : 2 +/- 0.5 secs    

Metal Film Capacitor

MOV 14D561KJ

Metal Film CapacitorMPP105J2W190611600

Metal Capacitor

Metallized Polyester Film Capacitor

Film Capacitor

BAST Lighting Co Ltd

As shown are ballasts for T5 lamp applications. These ballasts are lightweight and compact. The ballasts have an extra high frequency. They are ideal for high switching frequency operations.
    High power factor (PF)  Low total harmonic distortion (THD)  Energy saving up to 25-30%  Lamp life increase by up to 50%  No starter and capacitor necessary  Flicker free ignition and operation  Stable and comfortable light output  Silent operation without humming noise  Low heat dissipation reducing air-conditioning load  Suitable for emergency lighting systems  Automatic re-start after lamp change  "End-Of-Life" protection  

Ballast

Guangdong Fengming Electronic Tech Co Ltd

   Pin capacitor for air conditioners.   Made of electrical class metalized polypropylene film.   Thickened metalized electrode.   94V level flame-resistant plastic box.   Enveloped with epoxy resin.   Welded by tinned copper wire.   Automatic production.   Good uniformity and high stability.  Technical specifications:
   Safety approvals: UL, VDE, CQC.   Implemented standard: GB/T3667, UL810, EN 60252.   Climatic category: 25/70/21, 25/85/21, 40/70/21, 40/85/21.   Rated voltage: 450V AC (50/60Hz).   Capacitance range: 1&mu;F~3.5&mu;F.   Capacitance tolerance: &plusmn;5% (J), &plusmn;10% (K), &plusmn;105% (U).   Testing voltage between terminals: 2 x UN (V AC)/60s.   Between terminals and case: 2 x UN + 1000 (V AC)/60s (&ge;2000V AC).   Insulation resistance (20℃) between terminals and case: &ge;2000M&Omega; (500V DC, 60s).   Tangent of loss angle (20℃): &le;0.002 (100Hz).  

Air Conditioner Capacitor

Changzhou Huawei Electronic Co.,Ltd

This is a screw capacitor. The aluminium electrolytic capacitor is very heavy duty and durable. Depending on the model, some can resist high temperature and with long life. Screw type capacitors for air conditioners are available. 
   Models available:   CD135 - 85&deg;C 2000hrs, standard   CD136 - 105&deg;C 2000hrs, standard   CD137 - 85&deg;C 5000hrs, long life   CD138 - 105&deg;C 5000hrs, wide temperture, long life   CD2N - 85&deg;C 5000hrs, U lug, especially for air conditioner  

Electrolytic Capacitor Screw Type

Wenling Shanshi Capacitor Manufactory

This motor run capacitor is commonly used in household appliances such as air conditioners, spa pumps and forced air heat furnaces. It is compliant with the CE certificate to ensure a high degree of safety. The high stability of this capacitor guarantees reliable operation of your devices.
 
  Rating capacitance: 30&mu;F &plusmn; 5%, SH,PO. 
  370V-10,000h/cl.B, 450V-120/50. 
  450V-3,000h/cl.C, 500V-120/10. 
  25/70/21 C, -25/70, 50/60Hz. 
  CE certificate. 
 

Motor Capacitor

TENTA ELECTRIC INDUSTRIAL CO.,LTD.

This motor run capacitor is designed for use in household appliances such as air conditioners. Good stability of this capacitor guarantees safe operation of your devices. This product is also available in different types for you to choose from.
 
  MPR: 1,000V-1,600V DC 0.1-4.7uF. 
  MPF: 250V-1,600V DC 1.0-60uF. 
 

Motor Run Capacitor

Shenzhen Liron Electronics Co., Ltd.

 	 LKG high operating termperature snap in aluminum electrolytic capacitor can be used in switching power, frequency converter, air conditioning,for welder and PCB mounting etc. 	 105℃， 400V， 680&mu;f 	 materials:aluminum, electrolytic paper. 	 size:35*50mm  

Liron LKG snap in Type Aluminum Electrolytic Capacitors

Liaoning Haili Film Electronics Co.,Ltd

This polypropylene film is one the key and basic product models to make film capacitors. It comes with metallized aluminum coating without a heavy edge. It is applied to capacitors for power systems, refrigerators and air conditioners.
 
  Base film: polypropylene film. 
  Resistivity: 1.5 -2.3ohm with tolerance 30%. 
  Thickness: 3.0 micron-15 micron. 
  Standard width: 4.5mm, 5mm,5.5mm, 100mm and so on. 
  Free margin: 0.25mm, 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm. 
  Winding core: 75mm. 
  Outside diameter: 130-180mm. 
  Packing: vacuum packing. 
 

Aluminum Metallized Polypropylene Film

This electrical capacitor is especially designed and made for air conditioners, refrigerators, generators and illuminating lamps. The reliable explosion-proof feature helps guarantee added safety during uses. This electrical capacitor also has an extra-long serving time. 	 Capacity volume variance: &plusmn;5%, &plusmn;10%. 	 Testing voltage: between leading-out 1.75UR, 10S no breakdown. 	 Between leading-out end and shell: 2,200VAC, 10S no breakdown. 	 Insulation resistance: between leading-out ends: &ge;3,000M&Omega;. &micro;F. 	 Between leading-out end and shell: &ge;1,000M&Omega;. 	 Loss tangent: &le;0.002(50Hz). 	 CQC, TUV, UL, VE, RoHS approved.  

Electrical Capacitor

   Air conditioner capacitor with grey housing.   Made of electrical class metalized polypropylene film.   Explosion protection safety capacitor for air conditioners.   Safety metalized electrode.   94V level flame-resistant plastic box.   Enveloped with epoxy resin.   Led by standard terminals.   Adopt special manufacturing process.   Stable performance.   Safety function.   Explosion protection.   Explosion-proof class: P2.   Applied in high-end air conditioners.  Technical specifications:
   Safety approvals: UL, TUV, CQC.   Implemented standard: GB/T3667, UL810, EN 60252.   Climatic category: 25/70/21, 25/85/21, 40/70/21, 40/85/21.   Rated voltage: 250V AC, 450V AC (50/60Hz).   Capacitance range: 1&mu;F～8&mu;F.   Capacitance tolerance: &plusmn;5% (J), &plusmn;10% (K), &plusmn;105% (U).   Testing voltage between terminals: 2 x UN (V AC)/60s.   Between terminals and case: 2 x UN + 1000 (V AC)/60s (&ge;2000V AC).   Insulation resistance (20℃) between terminals and case: &ge;2000M&Omega; (500V DC, 60s).   Tangent of loss angle (20℃): &le;0.002 (100Hz).  

Explosion Protection Safety Capacitor

   Made of electrical class polypropylene film, zinc-aluminum metalized electrode.   High-quality engineering plastic box.   Sturdy black housing in box shape.   Enveloped with epoxy resin, led by soldering lug.   Small in size and high cost performance.   Safety approvals UL, VDE, CQC, TUV.  

My Sourcing

Unfollow this supplier?

Unfollow this supplier?