Yenaut Industrial Company Limited

Product Introduction: BY-2000V conductive silver paste is a product developed mainly for RFID radio frequency circuits with ultra-low resistance requirements and specific curing process. It is also suitabe for EMI shielding circuits, contactless IC card antenna circuits, etc. General Features: It has good printability, conductivity, oxidation resistance, hardness and strong adhesion. Typical Applications: Mainly used for the silver paste of RFID radio frequency circuits,EMI shielding circuits, contactless IC card antenna circuits, etc. 

Conductive Silver Paste BY-2000V

Blueview Elec-optic Tech Co., Ltd

 MODEL H150-D3-DN4040 H150-D4-DN4040 Digital RGB Flexible Panel TM1914 IC  FEATURES To achieve rich light changes like dreaming color chasing effects with a controllerIPEX terminal wire - small and easy to install, can be rotated 360 degreesFPC material- flexible and can be cut into any shapeCustomize - a variety of specifications, support customization APPLICATION Curving Space, 4-15cm depth lighting Box, Ceiling etc. 

H150 DIGITAL RGB Flexible Panel 

Guangdong South HongMing (HK) Electronic Science & Technology Co Ltd

 	 Varistor is a sort of sensitive component which resistance value can vary with the applied voltage, it is widely used in the instantaneous overvoltage protection and surge absorption of Electronic-electrical equipment.      Features:     	 Great range of varistor voltage:  18V to 1.8KV  	 Fast response to transient voltage (ns) 	 High great withstanding surge current 	 Excellent non-linearity voltage 	 Symmetric V-I characteristics 	 No following-on current 	 Long life      Range of application:     	 Used in surge protection for IC, transistor, diode semiconductor switch circuit. 	 Used in communication, telemetering, electrical control and various electronic equipment. 	 Suppress the instantaneous overvoltage caused by electromagnetic valve and relay. 	 Supprss the instantaneous overvoltage caused by power supply. 	 Suppress the instantaneous overvoltage caused by electronic circuits 	 Lightning protection for various kind of electronic appliances.      Technical conditions:&nbsp;     	 Carry our standard of GB/T10193, GB/T10194, GB/T10195-1997 and SJ/T10348-10349. 	 Measurement conditions For varistors of 05D, 07D, 10D, 14D, 20D Series, voltage across the varistor measured under 1 m A DC. 	 Varistor voltage: The voltage between two terminals with the specified measuring current applied is expressed by letter V. 	 Maximum continuous operating voltage: The maximum sinusoidal RMS voltage or maximum DC voltage that can be applied continuously in the specified environmental temperature range. 	 Working ambient temperature: -40C ~ +85C&nbsp; 	 Storage temperature range: -40C ~ +125C  

MOV Varistor

 	 Varistor is a sort of sensitive component which resistance value can vary with the applied voltage, it is widely used in the instantaneous overvoltage protection and surge absorption of Electronic-electrical equipment.      Recognized Certificate     	 VDE, UL, CQC      Features:     	 Great range of varistor voltage:  18V to 1.8KV  	 Fast response to transient voltage (ns) 	 High great withstanding surge current 	 Excellent non-linearity voltage 	 Symmetric V-I characteristics 	 No following-on current 	 Long life      Range of application:     	 Used in surge protection for IC, transistor, diode semiconductor switch circuit. 	 Used in communication, telemetering, electrical control and various electronic equipment. 	 Suppress the instantaneous overvoltage caused by electromagnetic valve and relay. 	 Suppress the instantaneous overvoltage caused by power supply. 	 Suppress the instantaneous overvoltage caused by electronic circuits 	 Lightning protection for various kind of electronic appliances.      Technical conditions:&nbsp;     	 Carry our standard of GB/T10193, GB/T10194, GB/T10195-1997 and SJ/T10348-10349. 	 Measurement conditions For varistors of 05D, 07D, 10D, 14D, 20D Series, voltage across the varistor measured under 1 m A DC. 	 Varistor voltage: The voltage between two terminals with the specified measuring current applied is expressed by letter V. 	 Maximum continuous operating voltage: The maximum sinusoidal RMS voltage or maximum Dc voltage that can be applied continuously in the specified environmental temperature range. 	 Working ambient temperature: -40C ~ +85C&nbsp; 	 Storage temperature range: -40C ~ +125C  

Varistor Mov Φ10d

 	 Varistor is a sort of sensitive component which resistance value can vary with the applied voltage, it is widely used in the instantaneous overvoltage protection and surge absorption of Electronic-electrical equipment.      Features:     	 Great range of varistor voltage:  18V to 1.8KV  	 Fast response to transient voltage (ns) 	 High great withstanding surge current 	 Excellent non-linearity voltage 	 Symmetric V-I characteristics 	 No following-on current 	 Long life      Range of application:     	 Used in surge protection for IC, transistor, diode semiconductor switch circuit. 	 Used in communication, telemetering, electrical control and various electronic equipment. 	 Suppress the instantaneous overvoltage caused by electromagnetic valve and relay. 	 Suppress the instantaneous overvoltage caused by power supply. 	 Suppress the instantaneous overvoltage caused by electronic circuits 	 Lightning protection for various kind of electronic appliances.      Technical conditions:&nbsp;     	 Carry our standard of GB/T10193, GB/T10194, GB/T10195-1997 and SJ/T10348-10349. 	 Measurement conditions For varistors of 05D, 07D, 10D, 14D, 20D Series, voltage across the varistor measured under 1 m A DC. 	 Varistor voltage: The voltage between two terminals with the specified measuring current applied is expressed by letter V. 	 Maximum continuous operating voltage: The maximum sinusoidal RMS voltage or maximum DC voltage that can be applied continuously in the specified environmental temperature range. 	 Working ambient temperature: -40C ~ +85C&nbsp; 	 Storage temperature range: -40C ~ +125C  

MOV Varistor Dipped

Varistor is a sort of sensitive component which resistance value can vary with the applied voltage, it is widely used in the instantaneous overvoltage protection and surge absorption of Electronic-electrical equipment.

    Features:    
- Great range of varistor voltage:  18V to 1.8KV 
- Fast response to transient voltage (ns)
- High great withstanding surge current
- Excellent non-linearity voltage
- Symmetric V-I characteristics
- No following-on current
- Long life

    Range of application:    
- Used in surge protection for IC, transistor, diode semiconductor switch circuit.
- Used in communication, telemetering, electrical control and various electronic equipment.
- Suppress the instantaneous overvoltage caused by electromagnetic valve and relay.
-&nbsp;Supprss the instantaneous overvoltage caused by power supply.
- Suppress the instantaneous overvoltage caused by electronic circuits
- Lightning protection for various kind of electronic appliances.

    Technical conditions:&nbsp;    
- Carry our standard of GB/T10193, GB/T10194, GB/T10195-1997 and SJ/T10348-10349.
- Measurement conditions For varistors of 05D, 07D, 10D, 14D, 20D Series, voltage across the varistor measured under 1 m A DC.
- Varistor voltage: The voltage between two terminals with the specified measuring current applied is expressed by letter V.
- Maximum continuous operating voltage: The maximum sinusoidal RMS voltage or maximum Dc voltage that can be applied continuously in the specified environmental temperature range.
- Working ambient temperature: -40C ~ +85C&nbsp;
- Storage temperature range: -40C ~ +125C

Varistor

Varistor Taping Type

Varistor is a sort of sensitive component which resistance value can vary with the applied voltage, it is widely used in the instantaneous overvoltage protection and surge absorption of Electronic-electrical equipment.

    Features:    
- Great range of varistor voltage:  18V to 1.8KV 
- Fast response to transient voltage (ns)
- High great withstanding surge current
- Excellent non-linearity voltage
- Symmetric V-I characteristics
- No following-on current
- Long life

    Range of application:    
- Used in surge protection for IC, transistor, diode semiconductor switch circuit.
- Used in communication, telemetering, electrical control and various electronic equipment.
- Suppress the instantaneous overvoltage caused by electromagnetic valve and relay.
-&nbsp;Supprss the instantaneous overvoltage caused by power supply.
- Suppress the instantaneous overvoltage caused by electronic circuits
- Lightning protection for various kind of electronic appliances.

    Technical conditions:&nbsp;    
- Carry our standard of GB/T10193, GB/T10194, GB/T10195-1997 and SJ/T10348-10349.
- Measurement conditions For varistors of 05D, 07D, 10D, 14D, 20D Series, voltage across the varistor measured under 1 m A DC.
- Varistor voltage: The voltage between two terminals with the specified measuring current applied is expressed by letter V.
- Maximum continuous operating voltage: The maximum sinusoidal RMS voltage or maximum DC voltage that can be applied continuously in the specified environmental temperature range.
- Working ambient temperature: -40C ~ +85C&nbsp;
- Storage temperature range: -40C ~ +125C

ZHONGSHAN DMINDS LIGHTING TECHNOLOGY CO.,LTD.

PRODUCT SPECIFICATION-- MODEL NO.: DM--5V-5050-144D-10mm-RGB+IC LED CHIPS: 144D/M PCB SIZE: 10mm POWER: 12W VOLTAGE: 5V COLOR TEMPERATURE: RED/BLUE/GREEN/YELLOW/GOLD/ICE BLUE/ORANGE/RGB/ RGB+W/ RGB+CW/ RGB MAGIC CRI: RA&gt;80 LUMENS: 100-120LM/W CUT SIZE: 2.5/5cm BACK TAPE：3M MATERIAL: ELECTROYTIC DOUBLE LAYER COPPER PLATE APPLICATION: IP20 INDOOR ENVIREONMENT CERTIFICATION: CE/ROHS/UKCA/SASO/ETL/UL/CCC   PRODUCT FEATURES-- -A variety of colorful lighting effects ; -PIXEL mode : Monochrome, gradient, water running, horse racing running, text, numbers, chasing, English letters, pictures, animations, videos, etc. -Extend LED color:RGB/ RGB+W/ RGB+CW/ RGB MAGIC color; -Classical big size 5050 SMD LED strip; -5V Low voltage 12W high power; -High quality bright LED light source chips, with high luminous efficiency; -Low light atenuation and high color redering to RA90; -Ultimated creativity and free cut modeling; -Thickened FPC double layercopper electrolytic plated.  APPLICATION-- -Indoor ceiling install directly; -Used as light source, insert intall in linear profile or luminairous fixtures.   led strip light, strip l  

LED Light Strip

Foshan Shunde Guanyuda Power Supply Co Ltd

 	 Adapter Shell Size: 78 x 45 x 30mm (3.07&quot; x 1.77&quot; x 1.18&quot;). 	 Casing: GV18W (UL.CCC.VDE.KETI are available). 	 Input voltage: AC100-240V 	 Output voltage: DC 5V, 7.5V, 9V, 12V, 15V, 24V 	 Compatible DC plug: 3.5 x 1.35, 4.0 x 1.7, 5.5 x 2.1, 5.5 x 2.5, 6.5 x 3.0, 3.5 stereo and some special plugs.  Technical Data: 	 Features:	 		 Super mini size and easy portable. 		 Light &amp; convenient plug in. 		 LED indication, newest IC, non-load power consumption less than 0.3W, stable performance. 	 	 	 Application:	 		 Digital camera. 		 CD-ROM HUB ADSL AP. 		 Communication terminals. 		 Tester machine. 		 Any portable device or machine. 	 	  Input / Output Specifications: 	 Input Voltage: AC 100 - 240V,50/60Hz. 	 Range Voltage: AC 90 - 264V,47/63Hz. 	 Output Power: 18W. 	 Output Voltage: 5 V -24V. 	 Over Voltage Protection: 120%min. 	 Over Current Protection: 120%min. 	 Short Protection: Auto recovery. 	 Load Regulation: &plusmn; 5%.  DC12V1.5A Power Adapter with Europe Standard
Environmental specification: 	 Operating Temperature: 0 - 40℃. 	 Storage Temperature: -20 - 85℃. 	 Operating Relative Humidity: 5 - 95%RH.  Safety Specification: 	 UL / CUL PSE GS BS CE CB FCC SAA CCC BSMI C-TICK.  

Power Adapter with Europe Standard

Shenzhen LX Electronics Company Limited

Products introduction TRAN01 is a cutting-edge dual-mode Bluetooth 5.4 LE audio dongle that leverages the advanced Qualcomm QCC3086 chipset. This dongle is optimized for gaming, video, and enterprise applications. The TRAN01 Bluetooth dongle is built upon the QCC3086 WLCSP chipset, which integrates a single chip radio and baseband IC for Bluetooth 2.4 GHz systems. This fully qualified single-chip dual-mode Bluetooth v5.4 system provides a complete 2.4 GHz Bluetooth solution. By adopting the QCC3086 chipset, LX offers a powerful and versatile dongle to unlock the full potential of LE Audio and Snapdragon Sound, delivering exceptional wireless audio experiences across various applications and devices. The innovative TurboCast™ technology, which supports music sharing and complies with LE Audio's Auracast standard, has a broadcast delay of as low as 20ms and can share 48K 24-bit HD stereo music. Highlights ● Qualified to Bluetooth v5.4 specification. ● Ultra-low power ● Support Bluetooth® LE Audio ● Lossless and High-performance 24-bit stereo audio ● TurboCast™ technology ● Input interfaces: USB 2.0, Aux 3.5 ● A2DP Codec: SBC, aptX™, aptX Adaptive, aptX LL and aptX HD Audio ● Voice Codec: mSbc, aptX Voice ● LE Codec: LC3 General specification BT Version：V5.4 Bluetooth features：A2DP, HFP, HSP, AVRCP, SPP, LE Unicast, LE Broadcast Size：105*65*15mm Distance： &gt;30M LED：Blue, Red Battery：3.7V 180mAh Codec：SBC, AAC, APTX, APTX HD, APTX Adaptive,LC3, LDAC (optional) TurboCast™Support Audio input：USB 2.0, Aux 3.5 Charging type：USB Type-C Control interface：Physical key controls PIN code：0000 Model name：TRAN01 Technical specification Button: Power key LED: Blue and Red Chipset: QCC3086 External storage: NO Charging type: USB Type-C Antenna: SMA external antennas, 50 ohms Crystal: 2016 16M 9PF +-10PPM Work temperature range: -10 to +55 ℃ Storage temperature range: -20 to 60 ℃ Charging: 5V+/-0.25V 1A 

LE AUDIO AURACAST TRANSMITTER BROADCAST BREDR DUAL MODE LC3 CODEC TRAN01

Products introduction TRAN01R is a cutting-edge dual-mode Bluetooth 5.4 LE audio dongle that leverages the advanced Qualcomm QCC3086 chipset. This dongle is optimized for gaming, video, and enterprise applications. The TRAN01 Bluetooth dongle is built upon the QCC3086 WLCSP chipset, which integrates a single chip radio and baseband IC for Bluetooth 2.4 GHz systems. This fully qualified single-chip dual-mode Bluetooth v5.4 system provides a complete 2.4 GHz Bluetooth solution. By adopting the QCC3086 chipset, LX offers a powerful and versatile dongle to unlock the full potential of LE Audio and Snapdragon Sound, delivering exceptional wireless audio experiences across various applications and devices. The innovative TurboCast™ technology, which supports music sharing and complies with LE Audio's Auracast standard, has a broadcast delay of as low as 20ms and can share 48K 24-bit HD stereo music. Highlights ● Qualified to Bluetooth v5.4 specification. ● Ultra-low power ● Support Bluetooth® LE Audio ● Lossless and High-performance 24-bit stereo audio ● TurboCast™ technology ● Input interfaces: USB 2.0, Aux 3.5 ● A2DP Codec: SBC, aptX™, aptX Adaptive, aptX LL and aptX HD Audio ● Voice Codec: mSbc, aptX Voice ● LE Codec: LC3 General specification BT Version：V5.4 Bluetooth features：A2DP, HFP, HSP, AVRCP, SPP, LE Unicast, LE Broadcast Size：105*65*15mm Distance： &gt;50M LED：Blue, Red Codec：SBC, AAC, APTX, APTX HD, APTX Adaptive,LC3, LDAC (optional) TurboCast™Support Audio input：USB 2.0, Aux 3.5 Charging type：USB Type-C Control interface：Physical key controls PIN code：0000 Model name：TRAN01R Technical specification Button: Power key LED: Blue and Red Chipset: QCC3086 External storage: NO Charging type: USB Type-C Antenna: SMA external antennas, 50 ohms Crystal: 2016 16M 9PF +-10PPM Work temperature range: -10 to +55 ℃ Storage temperature range: -20 to 60 ℃ Charging: 5V+/-0.25V 1A 

 LE AUDIO AURACAST HIGHT PERFORMANCE STADIUM REPEATER 50M TRAN01R

Products introduction TRAN01R is a cutting-edge dual-mode Bluetooth 5.4 LE audio dongle that leverages the advanced Qualcomm QCC3086 chipset. This dongle is optimized for gaming, video, and enterprise applications. The TRAN01 Bluetooth dongle is built upon the QCC3086 WLCSP chipset, which integrates a single chip radio and baseband IC for Bluetooth 2.4 GHz systems. This fully qualified single-chip dual-mode Bluetooth v5.4 system provides a complete 2.4 GHz Bluetooth solution. By adopting the QCC3086 chipset, LX offers a powerful and versatile dongle to unlock the full potential of LE Audio and Snapdragon Sound, delivering exceptional wireless audio experiences across various applications and devices. The innovative TurboCast™ technology, which supports music sharing and complies with LE Audio's Auracast standard, has a broadcast delay of as low as 20ms and can share 48K 24-bit HD stereo music. Highlights ● Qualified to Bluetooth v5.4 specification. ● Ultra-low power ● Support Bluetooth® LE Audio ● Lossless and High-performance 24-bit stereo audio ● TurboCast™ technology ● Input interfaces: USB 2.0, Aux 3.5 ● A2DP Codec: SBC, aptX™, aptX Adaptive, aptX LL and aptX HD Audio ● Voice Codec: mSbc, aptX Voice ● LE Codec: LC3 General specification BT Version：V5.4 Bluetooth features：A2DP, HFP, HSP, AVRCP, SPP, LE Unicast, LE Broadcast Size：105*65*15mm Distance： &gt;30M LED：Blue, Red Codec：SBC, AAC, APTX, APTX HD, APTX Adaptive,LC3, LDAC (optional) TurboCast™Support Audio input：USB 2.0, Aux 3.5 Charging type：USB Type-C Control interface：Physical key controls PIN code：0000 Model name：TRAN01R Technical specification Button: Power key LED: Blue and Red Chipset: QCC3086 External storage: NO Charging type: USB Type-C Antenna: SMA external antennas, 50 ohms Crystal: 2016 16M 9PF +-10PPM Work temperature range: -10 to +55 ℃ Storage temperature range: -20 to 60 ℃ Charging: 5V+/-0.25V 1A 

 LE AUDIO AURACAST HIGHT PERFORMANCE REPEATER BROADCAST 50M(PA 200M) DISTANCE LC3 CODEC TRAN01R

Solar Nation Powertech Enterprises Co Ltd

Configuration &amp; Specifications: Amorphous silicon solar panelLithium rechargeable battery12pcs of bolded C7 type lamp head with E12 screw holder inside12pcs of G50 type clear bulb with multi-colors fairy LEDs(Red /Green / Blue) insideG50 type clear PET plastic bulb with E12 screw cap, replaceableTotal length 886cm/29ftON/OFF switch and lighting mode switch on the back of solar panelTurn on automatically at dusk and stay on for up to 8 hours then turn off automatically as programmedUse IR remote control or lighting mode switch to select 4 differentlighting modes: Fast Flashing /Slow Flashing / Breathing / Constantly OnWith ground mounting spike and wall mounting kitsWatertight connectors on the cableWaterproof IP65Product Features: SOLAR STRING LIGHT ADDING REMOTE CONTROL, THE FUNCTION AND PERFORMANCE ARE:On back of solar panel there is ON/OFF switch.OFF means only function is solar panel can charge battery (in daytime).ON means:1) solar panel can charge battery (in daytime)2) turn string light on for 5 hours3) get ready to receive signal from remoteAfter the string light stays on for 5 hours, it will turn off automatically according to the program of IC. The next day if you want to turn string light on again, you can:1) Simply push the switch back to OFF position and then push to ON again, then the string light will stay on for 5 hours again.Or2) Press the remote to turn the string light on for 5 hours. So there is no Dusk till Dawn feature (i.e. auto turn on at night and auto turn off in the morning).Applications: Good choice for yard, front door, fence, lawn, garden, porch, balcony, and many other places. Mode Information. Please don't scratch the solar panel with sharp items like knife, or it will affect the conversion of solar panel.Please don't hesitate to contact us if you are interested in our products, we will offer you the best purchasing experience.  

12 Bulbs Solar String Lightwith Multi-Colors Fairy LED With Remote Control

Configuration &amp; Specifications: Power source:AC120V/240V, 50Hz/60Hz12 bulbs with vintage filament style LED inside,2700~3200 Kelvinwarm whiteE26 screw type bulb with clear PC plastic S14 globe, replaceableBetween each 2 lamp heads on the string light there are 5pcs ofwarm white LED braided in cable,2700~3200 KelvinTotal length 732cm/24ftLighting mode switch on the on-line control boxUse RF remote control or lighting mode switch to select 3 differentlighting modes:Only 12 bulbs stay on, all the LEDs braided in cable stay offOnly the LEDs braided in cable stay on, all 12 bulbs stay offAll the bulbs and LEDs stay on togetherWaterproof IP65Product Features: SOLAR STRING LIGHT ADDING REMOTE CONTROL, THE FUNCTION AND PERFORMANCE ARE:On back of solar panel there is ON/OFF switch.OFF means only function is solar panel can charge battery (in daytime).ON means:1) solar panel can charge battery (in daytime)2) turn string light on for 5 hours3) get ready to receive signal from remoteAfter the string light stays on for 5 hours, it will turn off automatically according to the program of IC. The next day if you want to turn string light on again, you can:1) Simply push the switch back to OFF position and then push to ON again, then the string light will stay on for 5 hours again.Or2) Press the remote to turn the string light on for 5 hours. So there is no Dusk till Dawn feature (i.e. auto turn on at night and auto turn off in the morning).Applications: Good choice for yard, front door, fence, lawn, garden, porch, balcony, and many other places. Mode Information. Please don't scratch the solar panel with sharp items like knife, or it will affect the conversion of solar panel.Please don't hesitate to contact us if you are interested in our products, we will offer you the best purchasing experience.  

12 Bulbs AC Powered String Lightwith Transparent Lamp Heads and Cable With Remote Control

 Product Specification: 1. Color box size: 286 * 226 * 197mm2. Solar panel: 196*176MM，2.1W 5.5V amorphous silicon solar panel3. Battery: 2pcs 1800mAh 3.7V 18650 lithium battery4. Light source:(1)10PCS G40 frosted fog shaped PET plastic bulb, each lamp holder is equipped with a 5050 RGB SMD LED (non replaceable).(2) There are 20pcs RGB 5050 LEDs distributed at intervals on the transparent black light string wire5. Total working time after battery fully charged: 10 hours6. Automatic working mode: light control+remote control7. Manual switch: ON-OFF-AUTO8. Working method:1) The ON mode is a constant light+remote control mode, with 12 static light colors and 8 dynamic light effects available. The brightness can be adjusted, and the speed can be adjusted for dynamic effects. Static colors include: red, green, blue, white, RGB, orange, yellow, light green, light blue, purple, pink, and sky blue. Dynamic lighting effects: Strobe, Fade, Twinkle, Breath, Chaser, Random, RGB Flash, D Flash.2) After turning on the light in ON mode, the light will automatically turn off after continuously turning on for 5 hours.3) The OFF position: turn OFF.The AUTO mode is automatic lighting mode (light control), and the lighting effect operates according to the last set mode memory. The lighting effect can also be changed using the remote control. The light will automatically turn on every day when the ambient illumination drops to 25-40LUX. According to the program setting, the light will automatically turn off after continuously turning on for five hours.Product Features: SOLAR STRING LIGHT ADDING REMOTE CONTROL, THE FUNCTION AND PERFORMANCE ARE:On back of solar panel there is ON/OFF switch.OFF means only function is solar panel can charge battery (in daytime).ON means:1) solar panel can charge battery (in daytime)2) turn string light on for 5 hours3) get ready to receive signal from remoteAfter the string light stays on for 5 hours, it will turn off automatically according to the program of IC. The next day if you want to turn string light on again, you can:1) Simply push the switch back to OFF position and then push to ON again, then the string light will stay on for 5 hours again.Or2) Press the remote to turn the string light on for 5 hours. So there is no Dusk till Dawn feature (i.e. auto turn on at night and auto turn off in the morning).Applications: Good choice for yard, front door, fence, lawn, garden, porch, balcony, and many other places. Mode Information. Please don't scratch the solar panel with sharp items like knife, or it will affect the conversion of solar panel.Please don't hesitate to contact us if you are interested in our products, we will offer you the best purchasing experience.  

G40 RGB String Light Family Festival Decoration Home Personalized Christmas Garden String Lights

OLYMPIA LIGHTING CO LIMITED

Why we call Dynamic-DMX is that the model is compatible with direct DMX signal without any DMX converter device. Every meter of this product has 8 pixel(24 channels). It has the function of writing address. The signal circuit inside the product is parallel connected, which makes product with high stability. With specialized control, accessory, product can be designed for various building and stage projects. 1. Adopts SMD5050 Tri-chip LED as its light source; 2. WS2821 IC, DMX512 Compatible, DMX address writable; 3. Each output can take 512 pixels(1536 channels) if non-DMX controller is used; 4. Programmable to various color changing effects to cater to different applications; 5. Adopts first-class eco-friendly UV-resistant PVC material; 6. Dome and flat surface, continuous and uniform illumination; 7. Transerse minimum bending diameter 8 cm; 8. Easy to be installed, can be cut and reconnected; 9. Protection rating IP68; 10. Seamless joint connector provided to make continuous length.  Specification: LEDType: SMD5050tri-chipMaterial: PVC-IvoryWhiteWorkingVoltage: DC24VRatedPower/m: 12WLED Qty/m: 56LEDsLEDDistance: 1.78cmMin.CuttingUnit: 7LEDs Min.CuttingLength: 12.5cmConnectionLength: 7m power on one end, 15m on both endsIPRating: IP68 Singal: Compatible with DMX512, and extended DMX512Max pixels in one line: 512 pixels/ If using standard DMX512 controller, only 512 channels can be supportedDMX address: writable or prgramabledIC Type: WS2821, Signal Parallel Protected

Pixel Casing IP68 LED Linear Flex DMX F21 PVC Strip Lights

Huizhou Wisva Optoelectronics Co.,Ltd.

 SPECIFICATIONS: 
Item NO.: HH-SRGB180F010W05-2020M-COB
LED Chip/Meter: 180 Pcs 2020
IC: WS2812C
Input Voltage: 5VDC
PCB: 10mm 2oz
Power: 13W/M
Ra: 80+ or 90+
CCT: 2700K/3000K/4000K/6000K
Brightness: 200Lm/m
Efficiency: 15Lm/W
Length: 1m
Size Width: 10mm; Height: 2mm
Cutting Length: 11.11mm
Lifespan: 50,000 H
Working Temperature: -20&deg;C&nbsp; - 40&deg;C
Storage Temperature: -20&deg;C - 45&deg;C
Warranty: 3 years

 FEATURES: 
Chip-on-board design, with more chips on PCB, the lighting effects are more evenly.

Up to 528 chips on single meter, only 1.89mm distance between each chip.

4.5mm PCB width, ultra slim for more applications.

Double layer 2oz PCB, for better flexibility, heat dissipation and voltage drop.
&nbsp;

Digital COB Strip Lights

Why we call Dynamic-DMX is that the model is compatible with direct DMX signal without any DMX converter device. Every meter of this product has 8 pixel(24 channels). It has the function of writing address. The signal circuit inside the product is parallel connected, which makes product with high stability. With specialized control, accessory, product can be designed for various building and stage projects. 1. Adopts SMD5050 Tri-chip LED as its light source;2. WS2821 IC, DMX512 Compatible, DMX address writable;3. Each output can take 512 pixels(1536 channels) if non-DMX controller is used;4. Programmable to various color changing effects to cater to different applications;5. Adopts first-class eco-friendly UV-resistant PVC material;6. Dome and flat surface, continuous and uniform illumination;7. Transerse minimum bending diameter 8 cm; 8. Easy to be installed, can be cut and reconnected;9. Protection rating IP68;10. Seamless joint connector provided to make continuous length.Specification: LEDType: SMD5050tri-chipMaterial: PVC-IvoryWhiteWorkingVoltage: DC24VRatedPower/m: 12W LEDQty/m: 56LEDsLEDDistance: 1.78cmMin.CuttingUnit: 7LEDsMin.CuttingLength: 12.5cmConnectionLength: 7m power on one end, 15m on both endsIPRating: IP68 Singal: Compatible with DMX512, and extended DMX512Max pixels in one line: 512 pixels/ If using standard DMX512 controller, only 512 channels can be supportedDMX address: writable or prgramabledIC Type: WS2821, Signal Parallel Protected

Pixel Casing IP68 LED Linear Flex DMX SF15 Silicone neon strip lights

	Why we call Dynamic-DMX is that the model is compatible with direct DMX signal without any DMX converter device	Every meter of this product has 8 pixel (24 channels)	It has the function of writing address	The signal circuit inside the product is parallel connected, which makes product with high stability	With specialized control, accessory, product can be designed for various building and stage projects	Adopts SMD5050 Tri-chip LED as its light source	WS2821 IC, DMX512 Compatible, DMX address writable	Each output can take 512 pixels (1536 channels) if non-DMX controller is used	Programmable to various color changing effects to cater to different applications	Adopts first-class eco-friendly UV-resistant PVC material	Dome and flat surface, continuous and uniform illumination	Transverse minimum bending diameter 8 cm	Easy to be installed, can be cut and reconnected	Protection rating IP68	Seamless joint connector provided to make continuous lengthSpecification:	LED Type: SMD 5050 tri-chip	Material: PVC - ivory white	Working Voltage: DC 24V	Rated Power/m: 12W	LED Qty/m: 56 LEDs	LED Distance: 1.78cm	Min. Cutting Unit: 7 LEDs	Min. Cutting Length: 12.5cm	Connection Length: 7m power on one end, 15m on both ends	IP Rating: IP68	Signal: Compatible with DMX512, and extended DMX512	Max pixels in one line: 512 pixels/ If using standard DMX512 controller, only 512 channels can be supported	DMX Address: Writable or programmable	IC Type: WS2821, signal parallel protected	Color: RGB

Dynamic Pixel LED Neon Flex

	Why we call Dynamic-DMX is that the model is compatible with direct DMX signal without any DMX converter device	Every meter of this product has 8 pixel (24 channels)	It has the function of writing address	The signal circuit inside the product is parallel connected, which makes product with high stability	With specialized control, accessory, product can be designed for various building and stage projects	Adopts SMD5050 Tri-chip LED as its light source	WS2821 IC, DMX512 Compatible, DMX address writable	Each output can take 512 pixels (1536 channels) if non-DMX controller is used	Programmable to various color changing effects to cater to different applications	Adopts first-class eco-friendly UV-resistant PVC material	Dome and flat surface, continuous and uniform illumination	Transverse minimum bending diameter 8 cm	Easy to be installed, can be cut and reconnected	Protection rating IP68	Seamless joint connector provided to make continuous lengthSpecification:	LED Type: SMD 5050 tri-chip	Material: PVC - ivory white	Working Voltage: DC 24V	Rated Power/m: 12W	LED Qty/m: 56 LEDs	LED Distance: 1.78cm	Min. Cutting Unit: 7 LEDs	Min. Cutting Length: 12.5cm	Connection Length: 7m power on one end, 15m on both ends	IP Rating: IP68	Signal: Compatible with DMX512, and extended DMX512	Max Pixels in One Line: 512 pixels/ If using standard DMX512 controller, only 512 channels can be supported	DMX Address: Writable or programmable	IC Type: WS2821	Signal parallel protected	Color:RGB	Warranty: 3 year	Light Source: Neon bulb	Style: Modern

Flexible Neon LED Strip

Why we call Dynamic-DMX is that the model is compatible with direct DMX signal without any DMX converter device. Every meter of this product has 8 pixel(24 channels). It has the function of writing address. The signal circuit inside the product is parallel connected, which makes product with high stability. With specialized control, accessory, product can be designed for various building and stage projects.
<ul>
	<li>1. Adopts SMD5050 Tri-chip LED as its light source;</li>
	<li>2. WS2821 IC, DMX512 Compatible, DMX address writable;</li>
	<li>3. Each output can take 512 pixels(1536 channels) if non-DMX controller is used;</li>
	<li>4. Programmable to various color changing effects to cater to different applications;</li>
	<li>5. Adopts first-class eco-friendly UV-resistant PVC material;</li>
	<li>6. Dome and flat surface, continuous and uniform illumination;</li>
	<li>7. Transerse minimum bending diameter 8 cm; 8. Easy to be installed, can be cut and reconnected;</li>
	<li>9. Protection rating IP68;</li>
	<li>10. Seamless joint connector provided to make continuous length.</li>
</ul>
Specification:

<ul>
	<li>LED&nbsp;Type: SMD&nbsp;5050&nbsp;tri-chip</li>
	<li>Material: PVC-Ivory&nbsp;White</li>
	<li>Working&nbsp;Voltage: DC24V</li>
	<li>Rated&nbsp;Power/m: 12W LED&nbsp;Qty/m: 56LEDs</li>
	<li>LED&nbsp;Distance: 1.78cm</li>
	<li>Min.&nbsp;Cutting&nbsp;Unit: 7LEDs</li>
	<li>Min.&nbsp;Cutting&nbsp;Length: 12.5cm</li>
	<li>Connection&nbsp;Length: 7m power on one end, 15m on both ends</li>
	<li>IP&nbsp;Rating: IP68 Singal: Compatible with DMX512, and extended DMX512Max pixels in one line: 512 pixels/ If using standard DMX512 controller, only 512 channels can be supported</li>
	<li>DMX address: writable or prgramabled</li>
	<li>IC Type: WS2821, Signal Parallel Protected</li>
</ul>


Pixel Casing IP68 LED Linear Flex DMX F15 PVC

Shenzhen Socay Electronics Co., Ltd.

High Voltage Zinc Oxide Varistor&nbsp;05D330K&nbsp;

a.Response time:&lt;25ns

b,Voltage Range:15V~1800V(anyone during this range is ok!)

c,Current Discharge:100A~70kA(as above)

d,High capacitance

e,Easy to aging.

Features

Wide operating voltage (V1mA) range from 8V to 1800V.
Fast responding to transient over-voltage.
Large absorbing transient energy capability.
Low clamping ratio and no following-on current

High Voltage Zinc Oxide Varistor&nbsp;05D330K&nbsp;&nbsp;

Specifications

metal oxide varistor&nbsp;
Fast responding&nbsp;
Low clamping ratio&nbsp;
withstanding surge crrent:15000A&nbsp;
power rated:1.0W

High Voltage Zinc Oxide Varistor&nbsp;05D330K

General Information &nbsp;

The MOV-05DxxxK Series of 05mm radial leaded varistor devices&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
protects against overvoltage transients such as lightning, power&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
contact and power induction. The metal oxide varistors offer a&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
choice of varistor voltages from 18 V to 1800 V and Vrms voltages&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
from 11 V to 1000 V.

&nbsp;&nbsp;General Characteristics

No Radioactive Material&nbsp;
Leads: Surface-mount, Axial Devices: Tin Plated&nbsp;
Storage Temperature: -55oC to +125oC
Operating Temperature: -55oC to +85oC&nbsp;
The devices have a high current handling, high energy absorption&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
capability and fast response times to protect against transient&nbsp;
&nbsp;Devices with No Leads: Nickel Plated&nbsp;
faults up to rated limits.&nbsp;
&nbsp;Body: Nickel Plated

Application

Transistor, diode, IC, thyristor or triac semiconductor protection.
Surge protection in consumer electronics.
Surge protection in industrial electronics.
Surge protection in electronic home appliances,
gas and petroleum appliances.
Relay and electromagnetic valve surge absorption.

My Sourcing

Unfollow this supplier?

Unfollow this supplier?