ULTMOST ELECTRONIC LTD

Better than similar products on the market: 1. After the battery is fully charged, the running time is TRULY longer than 60 minutes.   (The long operation time is not contributed from "light weight" but from the special gear transmission design. If an electric mop is too light, it lacks friction and cannot mop clean; if it is too heavy, it consumes power. This model has an appropriate weight, and through a special structural design, the battery can still work continuously for more than 60 minutes after a full charge.) 2. Use brushless motor  (Stable, efficient, power-saving, durable) 3. Install anti-collision strip to avoid damaging furniture 4. Mist water spray, spray more evenly 5. CONDENSER LENS lens spot light (not just a regular LED light) design, no dirt can escape 6. Install a long mop on the rear edge to wipe away residual water stains so that there are no residual water marks after mopping. 7. Install dual rear wheels to make the mop easier to move and store 8. The special water tank cover design prevents water from leaking out when the machine is tilted to remove or install mops. 9. Using RF wireless control and placing the battery on the main unit, there is no wire connection between the tow bar and the host; therefore, there is no hidden danger of wearing out the wires between the tow bar and the main unit due to frequent rotation of the tow bar. 

CORDLESS ELECTRIC MOP (Advanced Version)

Kopen Electrical Co Ltd

The displayed soldering iron has a high quality nichrome heating element with excellent thermal stability to ensure a long life time. It has an impact resistant handle with a short barrel length to allow precise and simple controls. This soldering iron can be used on fine and hard to reach points and comes with a plastic stand base.
<ul>
	<li>High quality nichrome heating element with excellent thermal stability to ensure a long life time.</li>
	<li>Seamless stainless steel barrel to restrain heat expansion, minimize damage to mica inside the heating element.</li>
	<li>Molded plastic handle with 100% impact resistance.</li>
	<li>Compact and lightweight handle with a short barrel length.</li>
	<li>Allow precise and simple controls.</li>
	<li>Can be used on fine and hard to reach points.</li>
	<li>Come with a plastic stand base.</li>
	<li>Power: 20W - 80W.</li>
	<li>Long lasting quality.</li>
	<li>UL and CUL (UL for Canada) listed by Underwriters Laboratories Inv. in strict compliance with U.S. Technical standard.</li>
	<li>Colors can be customized based on MOQ.</li>
</ul>


Soldering Iron

Surface Mount Technology Ltd

This is a machine for pick & place and bonding technology. This pick & place machine is clip mounted and the minimum size is 0201. It is IC mounted and the fine pitch is in 0.3mm of QFP. The BGA or micro BGA has a diameter of 0.4mm with a 0.8mm pitch. Diameter of the ball is 0.3mm and it comes with a 0.5mm pitch CSP.
    Bonding Technology: aluminium wire bonding  Flip chip bonding: ACF, C4 and C5 Technology  Convenient to operate  

Pick & Place and Bonding Technology

Ningbo Zhongdi Industry & Trade Co Ltd

This self-contained soldering station is an ideal welding tool for amateur engineers. It features precise temperature regulation from 1 to 10 degrees per grade. A warning&nbsp;sign will pop up on the screen with sound when breakdown occurs.&nbsp;
 
  Temperature control button: 200 &deg;C , 300 &deg;C  and&nbsp;400 &deg;C . 
  Great for schools,&nbsp;workshops and laboratories. 
 

Soldering Station

Displayed here is a soldering station with two digital displays. The insulated housing offers safe use. This soldering station is a brilliant choice for professional technicians.

 
  Voltage:&nbsp;110-120V, 220-240V. 
  Wattage:&nbsp;140W. 
 

This displayed electronic tool s a soldering iron that is battery operated. The soldering iron is made of high-quality materials for enhanced performance and durability. This battery-operated iron is easy to handle and use.
 
  Voltage: 4.5V. 
  Wattage: 8W. 
 

Electronic Tool

This digital&nbsp;soldering station&nbsp;can be used when repairing and soldering electronic appliances and communication equipment. This piece is controlled automatically by the micro-processor. The high-quality sensor and heat exchange system guarantee precise temperature control at the soldering tip. 

 
  Easy operation. 
  Quick heating. 
 

Digital Soldering Station

Displayed here is an LCD display soldering station with a digital multimeter and a DC power supply. The quality soldering station guarantees quick heat-up and precise temperature control. The multimeter can accurately measure the alternating current, direct current, resistance, diode and other technical data. 

 
  Great tool for schools, laboratories and repair works. 
  Stable voltage output: 1.2-15V. 
  Adjustable direct current power supply. 
 

LCD Display Soldering Station

Featured is a professional soldering iron with an&nbsp;intelligent control circuit design. It heats up in just 5 seconds for instant welding and soldering jobs. With an ergonomic handle for excellent comfort, this professional soldering pen is widely used in precision welding of SMT, laboratories, design workshops and households.
 
  Easy to operate and simple maintenance. 
  LED light indicator. 
  Automatic sleep mode. 
  Input voltage:&nbsp;AC100-240V 50/60Hz. 
  Output: DC5V, 2A&nbsp;(max.).&nbsp; 
  Output power: 10W (max.). 
  Tip temperature: 400-500 &deg;C .&nbsp; 
 

Better than similar products on the market: (Electric Mop part) 1. After the battery is fully charged, the running time is TRULY more than 60 minutes.   (The long operation time is not contributed from "light weight" but from the special gear transmission design. If an electric mop is too light, it lacks friction and cannot mop clean; if it is too heavy, it consumes power. This model has an appropriate weight, and through a special structural design, the battery can still work continuously for more than 60 minutes after a full charge.) 2. Use brushless motor  (Stable, efficient, power-saving, durable) 3. Install anti-collision strip to avoid damaging furniture 4. Mist water spray, spray more evenly 5. CONDENSER LENS lens spot light (not just a regular LED light) design, no dirt can escape 6. Install a long mop on the rear edge to wipe away residual water stains so that there are no residual water marks after mopping. 7. Install dual rear wheels to make the mop easier to move and store 8. The special water tank cover design prevents water from leaking out when the machine is tilted to remove or install mops. 9. Using RF wireless control and placing the battery on the main unit, there is no wire connection between the tow bar and the host; therefore, there is no hidden danger of wearing out the wires between the tow bar and the main unit due to frequent rotation of the tow bar.  (Vacuum Cleaner part) One-button dumping - dust bin does not need to be disassembled 

CORDLESS MOP & VACUUM COMBO (ADVANCED VERSION)

Goldsun Electronics Co., Ltd.

The professional cable tester is designed to identify and trace wires or cables within a group without damaging the insulation. Red and black test leads are provided. It has&nbsp;standard 4-conductor modular cord and plug. It works with any tone generator to identify wires.
 
  Verifies continuity, polarity, and detects faults. 
  Composite tip reduces chock risk. 
  LED signal-strength indication. 
  Adjustable volume control. 
  Earphone jack for noisy environments. 
  Modular jack and test pins for multiple connection options. 
  Ring-tip polarity test indicator. 
  Accessories: BNC/F adapter, 50&Omega; BNC terminator, RG58U cable, 9V battery, carrying case. 
 

Cable Tester

The soldering station features a compact design for easy storage. The soldering iron features an insulated handle for safe operation. The robust mechanism ensures a long lifespan.

 
  Voltage:&nbsp;110-120V, 220-240V. 
  Wattage:&nbsp;48W. 
 

Featured here is a soldering iron with a robust design. The insulated handle delivers a cool touch. This soldering iron provides reliable performance over years.

 
  Voltage:&nbsp;110-120V, 220-240V. 
  Wattage:&nbsp;30, 50W. 
 

GUANGZHOU YI TONG MACHINERY IND'L CO LTD

 	 Table size (mm): 600x500. 	 Travel longitude(X) (mm): 600. 	 Travel crossward (Y) (mm): 500. 	 Travel vertical (Z) (mm): 250. 	 Gantry width (mm): 760. 	 Spindle taper: ER20/ER25 or BT30. 	 Spindle rotation speed (rpm): 500-24000. 	 Spindle motor (kw): 3.2/4.0/5.5. 	 X Y Z axis servo motor (kw): 0.85. 	 Distance between tool head and table (mm): 50-300. 	 X Y Z axis feed speed (m/min): 8. 	 X Y Z axis rapid speed (m/min): 10. 	 Net weight (kg): 2800. 	 Maximum load of table (kg): 300. 	 Stock available: 100.  CNC Engraving machine
HIGH SPEED,HIGH PRECISION AND DURABLE QUALITY

High quality die casting,gantry frame with high rigid finning design which applicable for fast speed running.

Independent coolant system of spindle to assure stability and durability of spindle.

Imported brand linear guidway,ball screw,Japan servo motor and drive to assure high accurancy and stable performance.

4 axis and 5axis could be customized.

CNC Engraving Machine

Dongguan Longwei Instruments Co Ltd

Applications:&nbsp; 	 1. Temperature locking. 	 2.&nbsp;Beep alarm function available. 	 3. MCU controlled temperature calibration. 	 4. Simulate bar indicating heating up status. 	 5. Temperature read out in ℃ and ℉ 	 6. Separate iron stand to save room and to make easier deposit. 	 7.&nbsp;User-friendly menu enables system setting easier.. 	 8.&nbsp;Buttons (1,2,3) for pre-setting or switching frequently used temperature. 	 9.&nbsp;Soldering tip designed separate from heater and using exchangeable 900M series to save use-cost.&nbsp;  Feature:&nbsp; 	 1. Automatic sleep to save energy. 	 2. Long life. 	 3. Smart recognition of working or non-working status. 	 4. Automatic standby,shuutdown with smart time setting. 	 5.&nbsp;High performance dual-core wire heater. 	 6. New design with LCD display screen, making control&nbsp;visualization. 	 7. Low-voltage heater separated from power supply to keep soldering work safer.  Technical Specification:&nbsp; 	 &nbsp;Voltage: 	 AC&nbsp;(100V/110V/120V||220V/230V/240V) 	 Frequency 	 50/60Hz(Optional) 	 Power: 	 60W 	 80W 	 100W 	 Heater&nbsp;voltage: 	 26VAC 	 28VAC 	 24VAC 	 Temperature&nbsp;range: 	 150-450&deg;C/302-842&deg;F 	 Temperature&nbsp;oset&nbsp;range: 	 &plusmn;50&deg;C/&plusmn;90&deg;F 	 Temperature&nbsp;accuracy: 	 &plusmn;15&deg;C 	 &plusmn;10℃ 	 &plusmn;10℃ 	 Temperature&nbsp;stability: 	 &plusmn;2&deg;C(in&nbsp;still&nbsp;air,&nbsp;no&nbsp;load) 	 Automatic&nbsp;stand-by&nbsp;time: 	 1-120&nbsp;minutes 	 Standby&nbsp;temperature: 	 150&deg;C 	 Automatic&nbsp;shutdown&nbsp;time: 	 1-120&nbsp;minutes 	 Temperature&nbsp;adjustment: 	 5&nbsp;digits&nbsp;(Default)/1&nbsp;digit&nbsp;(Fine-tuning) 	 Heater: 	 60W High&nbsp;performance&nbsp;dual-wire&nbsp;heater 	 80W 	 High end quad-wire heater 	 100W 	 Silver alloy heater 	 Temperature&nbsp;lock: 	 Yes 	 Beep: 	 Yes 	 Tip-to-ground&nbsp;impedance: 	 &lt;2 	 Tip-to-ground&nbsp;voltage: 	 &lt;2mV 	 Dimensions: 	 168（L）X110(W)X 95(H)&nbsp;mm 	 Net&nbsp;weight: 	 2.0KG 	 List: 	 Soldering station, User manual, Soldering iron and holder, &nbsp;Plug,Cleaning sponge.  

Lead-Free Digital ESD Electric Welding Machine

Hong Kong Loobot Technology Limited

Psychological &amp; physical health care AI solution 	 Emotion monitoring 	 Dementia therapy 	 Memory practice 	 Entertainment  Voice Chat 	 Entertainment 	 Video call  Smart Photo Album 	 Memory game 	 SNS platform  Emotion monitoring engine
--Mental health maintenance

Mental health monitoring and interfering

Care APP: 	 Emotional diary 	 Health monitoring 	 SOS alarm  

Elderly Robot

LPKF Laser & Electronics AG

The LPKF ProtoMat S103 circuit board plotter for producing PCB prototypes and small batches is configured specifically for RF and microwave requirements. The touchless, pneumatic depth limiter further allows delicate surfaces, soft and flexible substrates to be processed. The ProtoMat S103 also carefully depanels irregularly shaped flexible circuit boards from larger boards. The sophisticated Z-axis drive makes the ProtoMat S103 perfect for finishing front panels and housings as well as depth milling microwave PCBs. Even machining populated PCBs is no problem at all. The ProtoMat S103 is extremely fast and accurate with a spindle speed of 100,000rpm, a maximum travel speed of 150 mm/s and a resolution of 0.5&mu;m. This ensures the accuracy required for drilling and milling ultra fine structures, especially for high-end applications in the RF- and microwave field. CircuitPro turns raw CAD data into a dataset for populating the circuit board with soldering paste with no additional expense. The software wizard guides the user through the individual process steps. An internal computation accounts for the pad shape and size to ensure that each pad has the right amount of soldering paste. This is further achieved through proven process parameters. The paste is applied with the built-in dispenser, all without having to convert the machine. 	 LPKF ProtoMat S103. 	 2.5-dimensional operation with Z-axis control. 	 100,000 rpm spindle motor.  

PCB Plotter

The ProtoMat E33 is barely larger than a size A3 sheet of paper and is an economical and compact circuit board plotter for machining circuit boards without wet chemicals. This makes the system perfect for use in training or for limited budgets. The LPKF ProtoMat E33 will structure single-sided or double-sided circuit boards, drilling holes for through-plating, cutting individual boards from the base material and can even engrave front plates for housings. 	 The system is robust and intended for application areas where time is not particularly of the essence. 	 And yet the LPKF ProtoMat E33 doesn&rsquo;t need to shy away from having its structuring results compared to those of its big brothers. 	 Still the system is easy to use. 	 The &ndash; included &ndash; software effectively supports users with the machining process. 	 Manual tool holder; all common drilling and milling tools are quickly and easily ready for use. 	 33,000rpm spindle speed Like all ProtoMats each ProtoMat E33 is carefully calibrated at the LPKF factory. 	 This ensures it will produce the finest structures in any common material. 	 With a maximum travel speed of 60 mm per second (approx. 2&rdquo;/s) and a spindle speed of 33,000rpm the E33 is the perfect entry-level model for in-house prototyping.  

Circuit Board Plotter

 	 The LPKF ProtoFlow S oven, with lead free capability, has significant advantages over previous models and rich features including a PC control software package. Several user programmable zones between preheating and final reflow enable the LPKF ProtoFlow S to process all reflow profiles up to 320. 	 The reflow process can also be observed through a large glass window assisting the operator to optimize the process parameters. Ideal for prototyping, technology research and pre-production runs the LPKF ProtoFlow S is a high tech, user friendly, reflow oven with many pre-programmed process profiles which can be easily selected via the LCD display and keypad. 	 The intuitive software package enabling process parameters to be conveniently changed, managed and archived on a PC, completes the user friendly control features of this sophisticated desktop reflow oven. 	 An external connection with digital flow meter for inert gas is available for the LPKF ProtoFlow S/N2. The nitrogen atmosphere significantly reduces the oxidation during the soldering process, and ensures better solder joint results. 	 The LPKF ProtoFlow S and ProtoFlow S/N2 can be fitted with a Profile recorder module for measuring temperatures of particular areas or components on the PCB by using four thermocouple probes. The temperature profile is displayed in real time on the PC.  

LPKF ProtoFlow S

Yujin Robot Co Ltd

iRobi Q is a content-customizable intelligence service robot based on the network.&nbsp;It was developed to provide convenient and quality services for kids and the elderly. The service field is thoughtfully customized for various regions owing to the robot application interface, script editor, 3D&nbsp;simulator, etc. Keep in pace with the fast-changing digital age with this network service robot.
 
  Based on Windows XP. 
  High technology. 
 

Network Service Robot

Roborn Dynamics Limited

 	 Dimension:200 x 100 x 820 mm 	 Max speed:1.7m/s 	 Max operation time: 120 minutes 	 Max loading: 9kg for arm;4kg for palm  

5G Motion Controlled Humanoid Robot

Applications:&nbsp; 	 1. Temperature locking. 	 2.&nbsp;Beep alarm function available. 	 3. MCU controlled temperature calibration. 	 4. Simulate bar indicating heating up status. 	 5. Temperature read out in ℃ and ℉ 	 6. Separate iron stand to save room and to make easier deposit. 	 7.&nbsp;User-friendly menu enables system setting easier.. 	 8.&nbsp;Buttons (1,2,3) for pre-setting or switching frequently used temperature. 	 9.&nbsp;Soldering tip designed separate from heater and using exchangeable 900M series to save use-cost.  Feature:&nbsp; 	 1. Automatic sleep to save energy. 	 2. Long life. 	 3. Smart recognition of working or non-working status. 	 4. Automatic standby,shuutdown with smart time setting. 	 5.&nbsp;High performance dual-core wire heater. 	 6. New design with LCD display screen, making control&nbsp;visualization. 	 7. Low-voltage heater separated from power supply to keep soldering work safer.  

60W Dual-Wire Heater LCD Repair Electronic Soldering Rework Station 

Foshan Golden Milky Way Intelligent Equipment Co Ltd

1.High revolution speed, linear speed up to 23M/s.
Low noise, one meter away noise &lt; 80 dBA.

2. High sealing. Three sets of mechanical sealing along with soft and hard sealing.

3. Low clearance (2L----1500L)&nbsp; Clearance between stirrer and stirrer: 2--7mm,
Clearance between Stirrer and vessel wall: 2--7mm, Stirrer and vessel bottom: 2--6mm.

4. One year warranty. Technicians are available for oversea service.

My Sourcing

Unfollow this supplier?

Unfollow this supplier?