Guangdong South HongMing (HK) Electronic Science & Technology Co Ltd

Metallized Polypropylene Film capacitor High-pressure tolerance, high insulation resistance and low-profile, is suitable for the direct current, impulse and low-power circuits with high temperature.Specification Reference standard : IEC 60384-16, GB 10190Climate category : 40/105/21Rated temperature : 85CelsiusOperation temperature range: -40 ~ 105CelsiusRated voltage : 100Vdc ~ 2000VdcCapacitance range : 0.00047uF ~ 6.8uFCapacitance tolerance : +-5%(J), +-10%(K), +-20%(M) (20Celsius, 1kHz)Voltage proof between terminations : U=1.6UR, 5s (20celsius)Insultation resistance : 100Vdc &lt;=UR&lt;500VdcCR&lt;=0.33uF, IR&gt;=60000MΩ, CR&gt;0.33uF,t&gt;=20000MΩ.uF(20celsius, 100Vdc, 1min)UR&gt;=500VdcCR&lt;=0.33uF , IR&gt;=60000MΩ, CR&gt;0.33uF , t&gt;=20000MΩ.uF(20celsius, 500Vdc, 1min)Dissipation factor:1kHz : &lt;=0.001010kHz : &lt;=0.0020(CR&lt;=1uF) (20celsius)

Metallized Polypropylene Capacitor

These are film capacitors which are made of polyester or polypropylene. Some versions are metallized and/or has a miniature size.
   Polyester film capacitors: for DC and pulsing circuits of radio, TV and so on   Metallised polyester film capacitors: for filter, noise suppression and so on   Miniature-sized metallised polyester film capacitors: with epoxy resin powder coating  

Film Capacitors

Resin molded SMT type for reflow soldering High reliability single lager disc capacitor Three types of choice for different use  Used at equipment as MODEM, AC adapter, charger, and converfor Electronic components for various kinds of electronic devicesDetailed specification available on the company website

CCH220J2825SLUCT0

CCF471K3225Y5PGYT0

ZVD4032C471KCT0 

This is a ceramic disc capacitor with different series available for high or medium voltages. Some of the series has semiconductive materials on the surface layer or barrier layer Electronic components for various kinds of electronic devicesDetailed specification available on the company website

DCG472M56Y5UU6wL7A0

CCF152M3225Y5VGYTV

ZVD4032C681KCT0

471K   Y2  Y5V

CCF102M3225Y5UCYT0

DCG102M34Y5UU6BL7A0

Metallized Polypropylene Capacitor  273J

Monolithic Ceramic Capacitors	Monolithic ceramic capacitor is a product that assemble the radial direction leads on the mutilayers ceramic capacitor (MLCC)	which has a feature of large capacitance (10pF ~ 10uF) small size, high reliability, stable capacitance, high temperature with standing and good insulation compared with normal disc ceramic capaciors that being used widely.Feature	Excellent temperature and frequency characteristic, with a stable and smaller drop of capacitance wldile fveguenag vlsing.	Can replace mica capacitors, paper capacitors and some tantalum capacitors.Application	Applied widely on small and micro electronic devices (such as liquid crystal watches and micro-equipment)	Used on electronic precision instruments	Mainly used in the circuit of bypass, filter, coupling, etc.

Mono CapacitorCCT104K85X7RH5FH5A0

 STANDARD ATMOSPHERIC CONDITIONS FOR MAKING MEASUREMENTS  	 AMBIENT TEMPERATURE : 15oC to 35oC(If there is any doubt on the results, the measurements shall be made at +20 +/- 5oC.) 	 RELATIVE HUMIDITY (R.H.) : 45% to 75% (If there is any doubt on the results, the measurements shall be made at 60% to 70%.) 	 AIR PRESSURE : &nbsp;86 kpa to 106 kpa. 	 OPERATING TEMPERATURE RANGE : -40oC to +105oC for which the capacitor can be operated continuously at rated voltage.    ELECTRICAL CHARACTERISTICS   	 Withstand Voltage (TV) :&nbsp;&nbsp;Between Terminals, Apply 150% of rated voltage for 60 sec., or 175% of rated voltage for 1~5 sec. at +20 +/- 5oC.The charging current must be &lt;= 1 Amp.&nbsp;Between Terminals &amp; Enclosure, Apply 200% of rated voltage for 2 to 5 sec. 	 Insulation Resistance (I.R.) : &gt;= 7,500 MOhm (C &lt;= 0.33 uF), &nbsp;&gt;= 2,500 MOhm*uF/C (C &gt; 0.33 uF) Apply Vt +/- 15% for 60 +/- 5 sec. at +20 +/- 5oC. Vt = 50 VDC if rated voltage &lt;= 100 VDC; Vt = 100 VDC if 100 VDC &lt; rated voltage &lt;= 500 VDC; Vt = 500 VDC if rated voltage &gt; 500 VDC. 	 Capacitance (CAP) : Within the tolerance specified. (at +20 +/- 5oC).&nbsp; 	 Measuring Frequency : 1 KHz +/- 10%.Measuring Voltage : &lt;= 1 Vrms.max. 	 Dissipation Factor (DF) : &lt;= 0.010 (1.0%) at 1 KHz. Measuring Frequency : 1KHz+/- 10% Measuring Voltage : &lt;= 1 Vrms.max. 	 Connection of Element : Shall be no open nor short-circuiting. The connection shall be stable. DF shall be &lt;= 0.010 (1.0%) at 1 KHz. Apply 200% of rated voltage for 10 times. 	 Solderability : More than 90% of circumferential surface of lead wire shall be covered with new solder. 	 Testing method per IEC 68-2-20 Ta. Soldering temperature : +260 +/- 5oC. 	 Immersion duration : 2 +/- 0.5 secs    

Metallized Polyester Film Capacitor

 	 Applications to small sized electronic products:&nbsp; 	 This series is designed for easy handling, available with variety of adjustments method 	 Wide mounting sizes and types of adjustments available 	 Capacity ranges from 1.5 to 120pF 	 Sturdy mechanical structure against vibration of shock  

Variable Capacitor

	Applications to small sized electronic products:	This series is designed for easy handling, available with variety of adjustments method	Wide mounting sizes and types of adjustments available	Capacity ranges from 1.5 to 120pF	Sturdy mechanical structure against vibration of shock

Trimmer Capacitor  6mm 50P

STANDARD ATMOSPHERIC CONDITIONS FOR MAKING MEASUREMENTS	AMBIENT TEMPERATURE : 15oC to 35oC(If there is any doubt on the results, the measurements shall be made at +20 +/- 5oC.)	RELATIVE HUMIDITY (R.H.) : 45% to 75% (If there is any doubt on the results, the measurements shall be made at 60% to 70%.)	AIR PRESSURE : 86 kpa to 106 kpa.	OPERATING TEMPERATURE RANGE : -40oC to +105oC for which the capacitor can be operated continuously at rated voltage.ELECTRICAL CHARACTERISTICS	Withstand Voltage (TV) :Between Terminals, Apply 150% of rated voltage for 60 sec., or 175% of rated voltage for 1~5 sec. at +20 +/- 5oC.The charging current must be &lt;= 1 Amp.Between Terminals &amp; Enclosure, Apply 200% of rated voltage for 2 to 5 sec.	Insulation Resistance (I.R.) : &gt;= 7,500 MOhm (C &lt;= 0.33 uF), &gt;= 2,500 MOhm*uF/C (C &gt; 0.33 uF) Apply Vt +/- 15% for 60 +/- 5 sec. at +20 +/- 5oC. Vt = 50 VDC if rated voltage &lt;= 100 VDC; Vt = 100 VDC if 100 VDC &lt; rated voltage &lt;= 500 VDC; Vt = 500 VDC if rated voltage &gt; 500 VDC.	Capacitance (CAP) : Within the tolerance specified. (at +20 +/- 5oC).	Measuring Frequency : 1 KHz +/- 10%.Measuring Voltage : &lt;= 1 Vrms.max.	Dissipation Factor (DF) : &lt;= 0.010 (1.0%) at 1 KHz. Measuring Frequency : 1KHz+/- 10% Measuring Voltage : &lt;= 1 Vrms.max.	Connection of Element : Shall be no open nor short-circuiting. The connection shall be stable. DF shall be &lt;= 0.010 (1.0%) at 1 KHz. Apply 200% of rated voltage for 10 times.	Solderability : More than 90% of circumferential surface of lead wire shall be covered with new solder.	Testing method per IEC 68-2-20 Ta. Soldering temperature : +260 +/- 5oC.	Immersion duration : 2 +/- 0.5 secs

Metal Film CapacitorMPP105J2W190611600

This is a ceramic disc capacitor with different series available for high or medium voltages. Some of the series has semiconductive materials on the surface layer or barrier layer     Electronic components for various kinds of electronic devices    Detailed specification available on the company website

 Electronic Components

This is a ceramic disc capacitor with different series available for high or medium voltages. Some of the series has semiconductive materials on the surface layer or barrier layer 
   Electronic components for various kinds of electronic devices   Detailed specification available on the company website  

Ceramic Disc Capacitor

Metal Film Capacitor

  Metallized Polypropylene Film capacitor   	 High-pressure tolerance, high insulation resistance and low-profile, is suitable for the direct current, impulse and low-power circuits with high tmerperature. 	 SpecificationReference standard : IEC 60384-16, GB 10190 	 Climate category : 40/105/21 	 Rated temperature : 85Celsius 	 Operation temperature range&nbsp;: -40 ~ 105Celsius 	 Rated voltage : 100Vdc ~ 2000Vdc 	 Capacitance range : 0.00047uF ~ 6.8uF 	 Capacitance tolerance : +-5%(J), +-10%(K), +-20%(M) (20Celsius, 1kHz) 	 Voltage proof between terminations : U=1.6UR, 5s (20celsius) 	 Insultation resistance : 100Vdc &lt;=UR&lt;500Vdc&nbsp; 	 CR&lt;=0.33uF, IR&gt;=60000M&Omega;, CR&gt;0.33uF,t&gt;=20000M&Omega;.uF 	 (20celsius, 100Vdc, 1min) 	 UR&gt;=500Vdc 	 CR&lt;=0.33uF , IR&gt;=60000M&Omega;, CR&gt;0.33uF , t&gt;=20000M&Omega;.uF 	 (20celsius, 500Vdc, 1min) 	 Dissipation factor:1kHz : &lt;=0.0010 	 10kHz : &lt;=0.0020 	 (CR&lt;=1uF) (20celsius)  &nbsp;  

CBB Capacitor

 	 Operating temperature: -85~125℃ &nbsp;(-25~125℃) 	 Capacitance and dissipation factor/quality factor testing condition : 25℃, 1Vrms, 1MHz (Class I) &nbsp;1KHz (Class II) 	 Dissipation factor / quality factor (Q) : &nbsp;Y5P Y5U Y5V ≦2.0% &nbsp;Y5P (Low dissipation type) ≦0.5%, &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 	 SL: CR&lt;30pF, Q≧400+20CR; CR≧30pF, Q≧1000 	 Rated Voltage: 1 ~ 15KV 	 Voltage proof: 2UR ; 1.5UR 	 Insulation resistance (IR) : IR&nbsp;≧ 10000Mohm (500VDC) 	 Temperature Characteristic: Y5P, Y5U, Y5V, YR, CO, SL  

Ceramic Capacitor

Inventronics (Hangzhou) Inc

 	 Innovative Design with No Electrolytic Capacitors 	 Ultra Long Lifetime: Greater than 100,000 hrs at 85&deg;C Case Temperature 	 Full Power at Wide Output Current Range (Constant Power) 	 Thermal Sensing and Protection for LED Module 	 0-10V/PWM/Timer Dimmable (3 Timer Modes ) 	 Dim-to-Off with Standby Power &le; 0.5 W 	 Always-on Auxiliary Power: 12VDC, 200mA 	 Output Lumen Compensation 	 Input Surge Protection: 6kV line-line, 10kV line-earth 	 246 x 67.5 x 39.7mm  

LED Driver

The ceramic disc capacitor is constructed of alternating layers of metal and ceramic. The ceramic layers act as the dielectric. It can be used in various electronic designs.Material: ceramic, metal.Wide applications.Available in various designs.

My Sourcing

Unfollow this supplier?

Unfollow this supplier?