Evergreen (H.K.) PCB Limited

 	 2.00m board thickness with Flash Gold Plating 	 Heavy Copper PCB 	 While Solder mask  

Heavy Copper PCB

 	 0.60mm board thickness with Flash Gold Plating finishing 	 Watch size PCB 	 Green Solder mask  

Watch PCB

This rigid printed circuit board is made of FR-4 grade material and has flash gold plating. It features a tow layers design and has a green solder mask. The printed circuit board offers impedance control and is suitable for watches and wire bonding use. 	 Rigid printed circuit board (PCB). 	 Material: FR-4. 	 Layer: 2 layers. 	 Board thickness: 0.6mm. 	 Finishing: flash gold plating. 	 Solder mask: green color. 	 Impedance control COB PCB. 	 Smart watch PCB. 	 Wire bonding PCB. 	 Wearable watch PCB. 	 Side push PCB. 	 Compact size. 	 Long working life. 	 Easy installation.  

Rigid PCB

This rigid printed circuit board comes in a multi-layered design and has a high TG. It has a green solder mask and has a flash gold plating with gold bonding finish. Made of FR-4 grade material, this rigid printed circuit board flaunts a high durability and offers superior connectivity.&nbsp; 	 Rigid printed circuit board (PCB). 	 Material: FR-4. 	 Layer: multi-layer---2 layers / 4 layers / 6 layers. 	 Board thickness: 1.0mm / 1.2mm / 1.6mm / 2.0mm / 2.4mm. 	 High TG: TG150 / TG170. 	 Finishing: flash gold plating with gold bonding. 	 Solder mask: green color. 	 Tech toy PCB. 	 Learning toy PCB. 	 Compact rectangular shape. 	 High durability. 	 Superior connectivity.  

The featured printed circuit board comes in a compact size and is excellent for wearable watches. It is made of FR-4 grade material and has a two-layer design. This printed circuit board has a flash gold plating finish and offers excellent connectivity. 	 Rigid printed circuit board (PCB). 	 Material: FR-4. 	 Layer: 2 layers. 	 Board thickness: 0.6mm. 	 Finishing: flash gold plating. 	 Solder mask: green color. 	 COB PCB. 	 Wire bonding PCB. 	 Wearable watch PCB. 	 Side push PCB. 	 Compact size. 	 Simple installation. 	 Excellent connectivity.  

Pictured here is a rigid printed circuit board for GPS and smart watches use. It has a two-layer design and is finished with flash gold plating. This printed circuit board delivers reliable performance and has a long working life. 	 Rigid printed circuit board (PCB). 	 Material: FR-4. 	 Layer: 2 layers. 	 Board thickness: 0.6mm / 0.8mm. 	 Finishing: flash gold plating. 	 Solder mask: green color. 	 COB PCB. 	 Smart watch PCB. 	 Wire bonding PCB. 	 Wearable watch PCB. 	 Side push PCB. 	 GPS sensor PCB. 	 Compact size. 	 Reliable performance. 	 Long working life.  

Featured here is a rigid printed circuit board for tech toys and learning toy. It has a multi-layered design and is finished with flash gold plating and gold bonding. Made of FR-4 grade material, this printed circuit board has good electrical insulation and has a high durability. 	 Rigid printed circuit board (PCB). 	 Material: FR-4. 	 Layer: multi-layer---2 layers / 4 layers / 6 layers. 	 Board thickness: 1.0mm / 1.2mm / 1.6mm / 2.0mm / 2.4mm. 	 High TG: TG150 / TG170 	 Finishing: flash gold plating with gold bonding. 	 Solder mask: green color. 	 Tech toy PCB. 	 Learning toy PCB. 	 High durability. 	 Good electrical insulation.  

The pictured rigid printed circuit board is made of FR-4 grade material and is finished with flash gold plating and gold bonding. It flaunts excellent connectivity and has a long working life. This rigid printed circuit board offers impedance control and is ideal for tech toys and learning toys. 	 Rigid printed circuit board (PCB). 	 Material: FR-4. 	 Layer: multi-layer---2 layers / 4 layers / 6 layers. 	 Board thickness: 1.0mm / 1.2mm / 1.6mm / 2.0mm / 2.4mm. 	 High TG: TG150 / TG170 	 Finishing: flash gold plating with gold bonding. 	 Impedance control. 	 Solder mask: green color. 	 Tech toy PCB. 	 Learning toy PCB. 	 Excellent connectivity. 	 Long working life.&nbsp;  

Featuring fine circuitry and active components, this PCB eases power connection and serves as the foundation for a wide range of computing devices. Its resilient double-layering housing further finishes off with flash gold plating to pledge secure applications.

Features:
&bull; Material: FR-4.
&bull; Thin construction.
&bull; Double-layer housing.
&bull; Showcase fine circuitry and active components.
&bull; Ease current flow.
&bull; Pledge secure and long-term applications.
&bull; Serve as the foundation for a wide range of computing devices.
&bull; Layer: 2.
&bull; Thickness: 0.6mm.
&bull; Finishing: flash gold plating.
&bull; Solder mask color: green.

Applications:
&bull; COB PCB.
&bull; Wire bonding PCB.
&bull; Wearable watch PCB.
&bull; Side push PCB.

This PCB is a must-have in your electronic devices that connects capacitors, resistors and other active components for effective use. Its robust multi-layer housing depicts several circular accents with etched current pathways and soldered parts of durable create.&nbsp;

Features:
&bull; Material: FR-4.
&bull; Slim housing.
&bull; Robust multi-layer construction.
&bull; Showcase several circular accents with etched current pathways and soldered parts.
&bull; Promise durable use.
&bull; A must-have component in machineries, electronic devices and more.
&bull; Layer: 4-layer.
&bull; Thickness: 0.4mm.
&bull; Finishing: flash gold plating.
&bull; Solder mask color: green.

Applications:
&bull; HDI PCB COB PCB.
&bull; Wire bonding PCB.
&bull; Smart watch PCB.
&bull; Wearable watch PCB.

Fancy Glow Industries (HK) Company Limited

This flash mask is made of top-grade PP for a long service life. It is made with excellent craftsmanship and attention to detail. This LED flash mask is widely used in parties, clubs, etc.   LED color: 6 lights: 2 red/2 blue/2 green.   Material: PP.   Battery: 2 x CR2016.   Packing: 1pc/PE bag, 48pc/ctn.   Body color: silver.   Flash mode: quick flash/gradual change/steady on/red flash/blue flash/green flash/off.   Delivery date: depending on your order quantity.   Environmentally-friendly.   Easy to take and use.   Professional: specializing in promotional gifts over 15 years.   OEM: any customized logo and design can be made in our factory.   Service: one-to-one personalized service.   Low MOQ: any quantity is acceptable.   Good quality: we have strict quality control system.   Good reputation in the market.  

Party Mask

Oxygen Ltd

Wireless connection, NFC &amp; stereo-pairing FM/AM/SW/WB PLL Radio (30 FM preset stations) Negative LCD display with black masking FM swivel Rubber antenna 19 x Control keys, 1 x master volume &amp; 2 x mic volume knobs Clock, Sleep, Snooze &amp; Alarm function Emergency siren &amp; alert white flash light mode AC &amp; DC outlet power on/off Output power: mono 60W RMS in BT/AUX mode &amp; 30W RMS in radio mode 1 x 8'' speaker external magnet + 1 x 1.5” tweeter + 2 x 6.5'' speaker membrane Inverter 1200 W Pure Sine Wave Built-in power board 400 SMPS, (fully charging time less than 4hrs) Built-in rechargeable LiFePO4 battery 1200Wh 2 x Aux-in jack 3.5mm 2 x Mic jack 1 x USB-C with PD fast charging,100W MAX 1 x USB-C output 5V/1A 2 x USB-A support QC fast charging, 30W MAX 2 x AC socket outlet with water proof cover, 3 Pin with grounding 1 x Cigarette lighter plug outlet 2 x DC OUT 12 V 1 x AC connector to recharge the device 1 x DC IN 12 V for car charger Anti-Choc, Splash proof IPX4 Detachable Rubber AC cord with 3-pin Roll up AC cord bracket on the back Cradle cavity for table or smartphone Telescopic pulling single pole handle 2 x Roller quad wheels 64mm Night light with brightness control on the left &amp; right side You're invited to visit our website at www.oxygen-ltd.com for more information on our product range 

Power Station Speaker

MGM Industries & Company

 	 Made of a clear, soft silicone, each flashing mouth piece brilliantly flashes multi-color lights 	 Completely sealed for personal safety, 	 Blinks in alternating Colors, Hand-washable, disposable toy, 	 Color of LED Light: Red, Green, Yellow and Blue 	 Material: Non-toxic Silicone  

Flashing Mouth

Partydragon Ltd

This is a glow-in-the-dark lightstick that is made with a robust structure. It is designed to deliver flashing lights for added fun. This glow-in-the-dark toy is ideal for carnivals, music concerts, disco parties, etc.
&nbsp;
Partydragon has a wide selection of glow in the dark toy and novelties that can be used for party favor, for various different special occasion and festival event, carnival, music concert, disco, etc.
&nbsp;
Our collection include 4-inch lightstick, 6-inch lightstick, glow necklace, glow bracelet, tri-glow necklace, tri-glow lightstick, glow skull necklace, glow earring, glow ring, glow hair barrette, glow sphere, glow peg top, glow wand, DIY glow set, DIY custom glow set, glow bugs, glow eye mask, and many more.

Glow-in-The-Dark Lightstick

 	 Packaging: OPP bag 	 Size of product: 20*16*16.5cm 	 Size of outer carton: 47*34*64CM 	 Qty/Ctn: 48pcs/ctn cbm/ctn: 0.102cbm/ctn 	 G.W.: 9.2kgs N.W.: 7kgs  

LED Party Double Mask

Etas and Company

Witch Headband 

Headband

Devil Felt Horn

Kids aged 7-10 can dress up as a ghost with this polyester jersey robe. It comes with a mask for covering the head and has mesh openings on the eyes and mouth for seeing and breaking. This ghost robe flaunts excellent workmanship and is perfect as a costume for Halloween and parties. 	 Material: polyester jersey. 	 For kids to dress up as a ghost. 	 Solid colored design. 	 Long sleeves. 	 Come with a mask for covering the head. 	 Mesh openings on the eyes and mouth for seeing and breaking. 	 Excellent workmanship. 	 Perfect as a costume for Halloween and parties. 	 For ages 7-10. 	 packaging: each one packed in polybag, 24 pieces / inner, 48 pieces / export carton. 	 Color: as picture, OEM colors are available.  

Ghost Robe 

HUGE SPECIAL PRINTING CO LTD

 	 Material: PET + LED device + fabric + Elastic band. 	 Printing: Full color front. 8 designs available. 	 Packing: individual polybag with header card. 	 **6 LED lights and battery are included. 	 Custom designs welcome. 	 Packaging: 152pc/ctn, 10kg, 54 x 54 x 40 cm  

LED Flashing Mask

Parason Industries Ltd

  Double-sides and multilayer (up to 16-Layer)  Base material: FR-4, CEM-3, Teflon, Aluminum Substrate, Roger  Surface Finish: HAL, Flash Gold, Immersion Gold, Immersion Tin, Immersion Silver, Entek, Preflux, Heat Sink, Gold Finger Plating, Carbon Ink Printingm Peelable Blue Mask (peters2954)  Solder Mask: Taito PSR 4000, Taimura DS2200, Electra (Dull Green)  Technology: Blind Vias, Buried Visa, Micro Visa, Selective Plating, HDL, Leadfree  Maximum Panel Size: 20〃 x 24〃 (508 x 610mm)  Minimum Line Width / Spacing: 0.004〃 (0.10/0.10mm)  Finished Hole Tolerance: ∮0.002〃 (∮0.05mm)  Minimum Line Width / Spacing: 0.004〃 (0.10/0.10mm)  Board Thickness: 0.016〃 (0.40mm) for 4-Layer, 0.020〃 (0.60mm) for 6-Layer.  

8 - Layer  PCB,0.8 mm Thickness, Microvias and controlled impedance PCB

  Double-sides and multilayer (up to 16-Layer)  Base material: FR-4, CEM-3, Teflon, Aluminum Substrate, Roger  Surface Finish: HAL, Flash Gold, Immersion Gold, Immersion Tin, Immersion Silver, Entek, Preflux, Heat Sink, Gold Finger Plating, Carbon Ink Printingm Peelable Blue Mask (peters2954)  Solder Mask: Taito PSR 4000, Taimura DS2200, Electra (Dull Green)  Technology: Blind Vias, Buried Visa, Micro Visa, Selective Plating, HDL, Leadfree  Maximum Panel Size: 20〃 x 24〃 (508 x 610mm)  Minimum Hole Diameter 0.008〃 (0.2mm)  Finished Hole Tolerance: ∮0.002〃 (∮0.05mm)  Minimum Line Width / Spacing: 0.004〃/ 0.004&quot; (0.10/0.10mm)  Board Thickness: 0.016〃 (0.40mm) for 4-Layer, 0.020〃 (0.60mm) for 6-Layer  

Multilayer PCB with Immersion Silver Finished , Manufacturing Standard: IPC-A-600F and PERFAG

   Double-sides and multilayer (up to 16-Layer)   Base material: FR-4, CEM-3, Teflon, Aluminum Substrate, Roger   Surface Finish: HAL, Flash Gold, Immersion Gold, Immersion Tin, Immersion Silver, Entek, Preflux, Heat Sink, Gold Finger Plating, Carbon Ink Printingm Peelable Blue Mask (peters2954)   Solder Mask: Taito PSR 4000, Taimura DS2200, Electra (Dull Green)   Technology: Blind Vias, Buried Visa, Micro Visa, Selective Plating, HDL, Leadfree   Maximum Panel Size: 20〃 x 24〃 (508 x 610mm)   Minimum Hole Diameter 0.008〃 (0.2mm)   Finished Hole Tolerance: ∮0.002〃 (∮0.05mm)   Minimum Line Width / Spacing: 0.004〃/ 0.004&quot; (0.10/0.10mm)   Board Thickness: 0.016〃 (0.40mm) for 4-Layer, 0.020〃 (0.60mm) for 6-Layer  

Multilayer PCB with Immersion Tin Finish, Manufacturing Standard: IPC-A-600F and PERFAG

   Double-sided and multilayer (up to 16-Layer)   Base Material: FR-4, CEM-3, Teflon, Aluminum Substrate, roger   Surface Finish: HAL, Flash Gold, Immersion Gold, Immersion Tin, Immersion Silver, Entek, Preflux, Heat Sink, Gold Finger Plating, Carbon Ink Printing, Peelable Blue Mask (Peters 2954)   Solder Mask: Taito PSR 4000, Taimura DS2200, Electra (Dull Green)   Technology: Blind Vias, Buried Visa, Micro Visa, Selective Plating, HDL, Leadfrer   Maximum Panel Size: 20〃 x 24〃 (508 x 610mm)   Minimum Hole Diameter: 0.008〃 (0.2mm)   Finished Hole Tolerance: ∮0.002〃 (∮0.05mm)   Minimum Line Width / Spacing: 0.004&quot;/ 0.004&quot; (0.10/0.10mm).   Board Thickness: 0.016〃 (0.40mm) for 4-Layer, 0.020〃 (0.60mm) for 6-Layer  

My Sourcing

Unfollow this supplier?

Unfollow this supplier?