LISUN ELECTRONICS (SHANGHAI) CO., LTD

The SG61000-5 is an automaticsurge generator (also called lightning surge immunity test, combination wave generator, surge current generator/surge voltage generator, combined surge voltage and current generator) . How does a surge generator work?The SG61000-5surge generator provides a common basis for evaluating the resistance of power cords and internal connectors of different equipment to high energy transient interference caused by natural lightning surge induction and large capacity load switching. Standard:IEC 61000-4-5/EN61000-4-5/GB/T17626.5 “Electromagnetic compatibility (EMC) – Part 4-5: Testing and measurement techniques – Surge immunity test” Specification: LISUN ModelSG61000-5SBSG61000-5SG61000-5H-SPSG61000-5H15-SPSG61000-5H20-SPSG61000-5COutput Voltage(Open)1.2/50μs±20%1.2/50μs±20%1.2/50μs±20%1.2/50μs±20%1.2/50μs±20%10/700μs±20%Output Current(Short)8/20μs±20%8/20μs±20%8/20μs±20%8/20μs±20%8/20μs±20%5/320μs±20%Output Impedance2Ω and 12Ω2Ω and 12Ω2Ω, 12Ω and 500Ω2Ω, 12Ω and 500Ω2Ω, 12Ω and 500Ω15Ω and 40ΩOutput VoltageRange0~4.8KV±5%0~6KV±5%0~10KV±5%0~15KV±5%0~20KV±5%0~6KV±5%Output CurrentRange0~2.4KA±5%0~3KA±5%0~5KA±5%0~7.5KA±5%0~10KA±5%0~150A±5%Surge Repetition1~9999 times1~9999 times1~9999 times1~9999 times1~9999 times1~9999 timesPolarityPositive, Negative or Automatic switchingPhase ShiftAsynchronous, Synchronization 0°~ 360° or Specific AngleSpecial FunctionN/AThe Latest FREE Update: with a Built-in High Voltage/High Current Attenuator Probe and Digital Oscilloscope, allowing you to view the output waveform directly on the torch screen!Operation WayTouch screen with super big LCD and built-in AndroidDimensions(W*D*H)44*45*35cm44*45*35cm72*61*175cm72*61*175cm90*80*175cm44*45*35cmGross WeightAbout 30kgAbout 30kgAbout 120kgAbout 150kgAbout 180kgAbout 30kgCoupling Decoupling Network(Built-in CDN)Includes a AC240V/16A single phase CDNInclude a 4LinesSymmetricalCDN CDN for Power Lines(External Optional)It can be selected according to the maximum output voltage of the surge and the maximum input of the EUT. Please visitLISUN CDN61000-5P to learn more details.N/ACDN for Communication Lines(External Optional)It can be selected according to the type of EUT, data transmission rate and surge output waveform. Please visitLISUN CDN61000-5C to learn more details.Isolution Transformerfor EUT(External Optional)LISUN ITEU-SP4K (220V Single Phase) or ITUS-SP2K (110V Single Phase)N/A

Surge Generator

Linkco Int'l Ltd

Portable Power Station electric generator For Emergency Camping Home Outdoor TravelAC module can be used as vehicle inverter separatelyCapacity: 74Wh/98WhCould be taken on the planeMulti-function output: AC 100W/USB*2（QC3.0）/TYPE-C Max 60W（in &amp; out）4 colors options: Orange/green/grey/blackExclusive patented productApply to:Laptop, tablet, mobile phone, drone, fan, light etc.Size/Weight: 119.5*9.5*8.4cm/1.15Kg

Portable Power Station electric generator For Emergency Camping Home Outdoor Travel

MGM Industries & Company

Product : 5L Medical Grade Oxygen Generator Inhalation Method : 340mm'290mm'625mm         Flow : 5L/min              Features : Medical Grade           Weight : 19kg               Oxygen Concentration : &gt;93%±3%              Oxygen Pressure : &lt;30-60Kpa             Input Power : 350W  Anion : 300,000 pcs/m3          Noise : &lt;50dB{A)             Voltage : 220V50Hz/60Hz   

5L Medical Grade Oxgen generator

Product : 10L Medical Grade Oxygen GeneratorInhalation Method : 340mm'290mm'712mm        Oxygen Flow : 10L/min             Features : Medical Grade          Weight : 26.8kg              Oxygen Concentration : &gt;93%±3%             Oxygen Pressure : &lt;30-60Kpa            Input Power : 700W Anion : 300,000 pcs/m3         Noise : &lt;50dB{A)            Voltage : 220V50Hz/60Hz 

10L Medical Grade Oxygen Generator

PFM61000-8A Magnetic Field Generator is high reliability test equipment with stable performance. It is especially designed for measuring immunity characteristics of electrical and electronic products and requirements of normal frequency magnetic field. It provides an accurate basis for the equipment under test (EUT) in the immunity test of normal frequency magnetic field. The generator can imitate the magnetic field environment such as residential, commercial, industrial and mining enterprises, power plants, as well as middle and high substation. Standard：IEC61000-4-8/ GB/T17626.8 “Electromagnetic compatibility (EMC) – Part 4-8: Testing and measurement techniques – Power frequency magnetic field immunity tes”Specification:• LCD display, built-in computer for control, easy to operate.•Freely set the time of current injection and interval, and the time of test.• Intelligently acquire current, voltage and magnetic field strength, all the parameters shown on the LCD display.• Magnetic field coil: 1 square meter (other sizes can be customized)•Magnetic field strength: 0A / m ~ 1000A / m continuously adjustable•Output Current: AC•The time of test: 999 times• Test interval: 1 ~ 99min•Current injection time: 1s to 99min•Current distortion rate: &lt;5%•Work mode (current range for continuous working): 1A ~ 100A•Work mode (current range for short-time working): &gt;100A ~ 500A, 1 ~ 5s, &gt;500A ~ 1000A, 1 ~ 3s•Methods of operation: manual, semi-automatic, automatic•Power supply: AC220V 50/60Hz• Working environment temperature: 15°C-35°C 

Magnetic Field Generator

Impulse Voltage Generators | Impulse Generators | Impulse Withstand Voltage Tester |High VoltageSurge Generator is according to IEC255-5,GB-14711 , GB/T-14598.3, IS-13252-1, IEC60060,IEC60065,GBT17215.301 andGBT17215.322. The insulation performance test is suitable for all kinds of electrical and electronic products (such as energy meter, household appliances, low voltage electrical appliances and small power motors). Standard:IEC255-5 “Relays – Insulation tests”IS-13252-1 “Information technology equipment — Safety Part 1 General requirements”IEC60060 “IEC 60060-1-2010 High-voltage test techniques – Part 1 General definitions and test requirements”IEC60065 ” Audio, video and similar electronic apparatus – Safety-requirements”IEC 60255-5:2000/GB/T-14598.3″Electrical relays – Part 25: Electromagnetic emission tests for measuring relays and protection equipment”GB/T-3048.8 “Test methods for determining electrical properties of electric cables and wires.A.C. voltage tests” LISUN ModelSUG255LXSUG255MXSUG255PXSUG255PX-20KVSUG255PX-25KVSUG255PX-30KVRange of Output Voltage0～12kV0～20kV0～25kV0～30kVImpedance of Generator12Ω and 500Ω38Ω and 500Ω2Ω and 500ΩVoltage Output Waveform1.2 / 50μsPolarity of Output VoltagePositive and NegativeOperation ModeManually and AutomaticTest Repetition1～9999Interval Time3～9999s

Impulse Voltage Generators | Impulse Generators IEC255-5, IEC60065

Features: * SPE technology. * No corrosion and pollution. * High purity hydrogen (99.999%) (for laboratory type). * Suitable for all kinds of GC (Gas chromatography). * Stable output flow, safe and convenient to operate, various alarm devices (over pressure alarm, water shortage alarm, water accumulated alarm). * The electrolyyic cell adopts imported ionic membrane, which has thecharacteristics of resistance, durability and long life. (for Breathing Type (plastic shell). * The output flow of electrical automatic control system is stable and the fluctuation is small.(for Breathing Typa (plastic shell).   

Gas Generator Pure Water Hydrogen Generator

3A Technology Company Limited

The G20 Portable Solar Generator provides 1.8 kWh of reliable power for your home during outages. Keep essential appliances running and stay connected in emergencies.   The G20 Portable Solar Generator provides everything you need to create a reliable, sustainable, and efficient energy storage solution. It delivers dependable power whenever and wherever you need it, ensuring you stay connected and powered up, no matter the situation.                                                         With the G20 Portable Solar Generator, enjoy reliable power anytime, anywhere. Perfect for RVs, off-roading, and camping, it ensures your devices and small tools run smoothly no matter where your adventure takes you. Stay powered up and ready for anything!  

G20-1536wh

HUIZHOU SANHUA INDUSTRIAL CO., LTD.

 This high voltage generator is capable of creating 12kV DC power. It is widely adopted in various electric devices. The compact structure ensures easy installation for users. 
 
  High quality. 
  Reliable performance. 
 

High-Voltage Generator

Ring wave test generator is designed according to theIEC61000-4-12, EN61000-4-12,ANSI-C62-41 andGB/T17626.12. This instrument is used for the simulative electrical network, the power supply of the reactive load and the control line switch, as well as sensing the ring wave of the low voltage cables terminal equipment caused by the disconnection of the power circuit, fault and insulation breakdown or lightning stroke. The RWG61000-12 series products have LCD display in both English and Chinese. Standard:IEC61000-4-12/EN61000-4-12/GB/T17626.12 “Electromagnetic compatibility (EMC) – Part 4-12: Testing and measuring – Ring waves immunity test”ANSI-C62-41 “IEEE Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits” Specification: Product ModelRWG61000-12RWG61000-12TRWG61000-12ARWG61000-12ATOutput Voltage0~4KV0~6KVVoltage/Current WaveOpen circuit voltage wave: frontier: 0.5μs±20%. Short circuit current wave: frontier: ≤1μs. Oscillation frequency: 100kHz±10%PolarityPositive, Negative or Automatic switchingPhase ShiftAsynchronous, Synchronization 0°~360° or Specific AngleOutput Impedance12Ω, 30ΩCoupling/Decoupling Network (CDN)Includes a 16A single phaseIncludes a 20A 3phases/5wiresIncludes a 16A single phaseIncludes a 20A 3phases/5wiresWorking PowerAC220V (Option 110V) ±10%, 50/60HzDimension (DxWxH)44x45x35cm44x45x20cm 44x45x35cm (CDN)44x45x30cm 44x45x20cm (CDN)44x45x30cm 44x45x35cm (CDN)Gross WeightAbout 28kgAbout 46kgAbout 45kgAbout 48kg

Ring Wave Generator

Features: * Compact structure, high integration, easy to use, saving laboratory space. * Stainless steel gas storage tank, safe and reliable, can replace laboratory cylinders. * Hydrogen part: automatic anti-return alkali, automatic flow tracking, three-stage filtration. * Nitrogen part: automatic anti-return alkali. automatic flow tracking. three-stage filtration. * Oil-free compressor, better air quality, heat insulation pad choose Dow, cylinder type electrolytic cell electrolytic area, long service life. (NHA-300G) * Air part: use oil-free compressor, stainless steel gas tank, two-stage voltage stabilization, three-stage filter, high precision, automatic drainage and perfect protection measures.   

Nitrogen Generator

Features: *It only takes 6-7 minutes for the shortest sterilization cycle which can extend service life of the instrument *Three shortcut keys for sterilization programs, the sterilization temperature and time can be set freely *Alarm for unqualified water and water shortage, the autoclave will stop working when there is a low temperature and low  pressure *Small dimension, light weight, easy to operate, the cassette can be also used for instrument transfer and temporary storage  Schematic Diagram: The steam generator heats to the optimum temperature when the sterilization program started. The distilled water is pumpedinto the generator and converted into steam immediately, then the steam is injected into the cassette which is loaded with instruments to be sterilized. The polluted air in the cassette is exhausted after the steam is injected.   

Cassette Sterilizer

Impulse Test Generator SUG-CCITT-A (Circuit 1, 10/700μS, according to Figure D.1/ Table D.1 in IEC 62368-1:2018 Annex D, Figure K.1/ Tabke K.1 in IEC 60065:2014 Annex K , and Figure N.1/ Table N.1 in IEC 60950-1:2005 Annex N). Standard:IEC 62368-1:2018“Audio/video, information and communication technology equipment – Part 1: Safety requirements”IEC 60065:2014 “Audio, video and similar electronic apparatus – Safety requirements”IEC 60950-1:2005 “Information technology equipment – Safety – Part 1: General requirements” Circuit reference 1 of Table D.1 generates 10/700 μs impulses (10 μs virtual front time, 700 μs virtual time to half value) as specified in ITU-T Recommendation K.44 to simulate lightning interference in the TELECOMMUNICATION NETWORK. Note:1. If you also need Circuit 2, 1.2/50μS, according to Figure D.1/ Table D.1 in IEC 62368-1:2018 Annex D (Or Figure K.1/ Tabke K.1 in IEC 60065:2014 Annex K , and Figure N.1/ Table N.1 in IEC 60950-1:2005 Annex N), it will beSUG255XXimuplse voltage generator2. If you also need Circuit 3, according to Figure D.2/ Table D.1 in IEC 62368-1:2018 Annex D (Or Figure N.2/Table N.1 in IEC 60950-1:2005 Annex N), it will beSUG255CXimuplse voltage generator  

Impulse Test Generator

Shijiazhuang Suin Instruments Co.,Ltd.

Featured here is a function and arbitrary waveform generator with a user-friendly interface. It is well engineered to deliver high-precision performance. It has perfect modulation functions including FM, AM, PM, PWM and FSK. 	 Dual outputs with same features. 	 1&mu;Hz frequency resolution. 	 Frequency range up to 20MHz. 	 100MHz frequency counter. 	 Standard interface of USB host and USB device. 	 Any waveform adjustable. 	 Rectangular housing. 	 With a stand at the bottom. 	 User-friendly interface. 	 Economical and lightweight. 	 Deliver high-precision performance. 	 Perfect modulation functions including FM, AM, PM, PWM and FSK.  

Function & Arbitrary Waveform Generator

All-in-One Emergency Radio Rechargeable lighting radio FM Radio Bluetooth Mini Speaker Mobile phone charger Power Generator Ideal for Any and All Emergency Situations Specification Chipset: CACHIP - C9650Built-in Battery: 3.7V 2000mAhFlashlight: 1PC LED (Weak light 0.5W, Strong light 1W)Desk Lamp: 10pcs LED (Weak light 0.5W, Strong light 1W)FM: 87-108MHzAM: 520-1710KHzWB: 162.400-162.550MHZSolar Panel: 5.5V 30mALifespan of light sources: &gt;10000 HCharging Input: DC 5.0V 1.2AOutput power: DC 5.0V 1.0ADriver: Φ40MM 4Ω3WDynamo Power: 5V/350MA  Function 1. LED lighting2. Desk Lamp3. AM/FM Radio4. WB Weather Forecast5. Emergency Siren &amp; Blink6. Phone Charger7. Dynamo8. Solar9. SOS10. Bluetooth  Accessories 1. Type-C charging Cable2. User Manual3. Folding-box4. Lanyard  Packing Information Product Size: 147.5x81x50.8mmColor Box Size: 175x119x58mmCarton Box Size: 62x37x25.2cmUnit Net Weight: 309gPCS/CTN: 20PCS/CTNN.W./CTN: 7.8 KGSG.W./CTN: 8.2 KGS 

All-in-One Emergency Radio Rechargeable lighting radio FM Radio Bluetooth Mini Speaker Mobile phone charger Power Generator Ideal for Any and All Emergency Situations

Evergreen (H.K.) PCB Limited

Showcased is a 4-layer rigid PCB. It features standard green solder mask and thick gold plating, which ensures superb performance and optimal quality with excellent conductivity. It can be widely applied to the power supply, power generator, ATM, and more.

&bull; Material: FR-4/ CEM-3.
&bull; 4-layer design.
&bull; Board thickness: 2.0mm/ 2.4mm.
&bull; High Tg: Tg150/ Tg170.
&bull; Finishing: immersion gold with thick gold plating.
&bull; Green solder mask.
&bull; Application: power generator, ATM, power supply, heavy copper UPS PCB, and more.
&bull; Battery-charged PCB.

Rigid PCB

Microtech Technology Co Ltd

Display SpecificationDisplay Character: 16 character X 2 lineCharacter Font: 5X8 dots + cursorDisplay Color-Display Background Color: FSTN, Black-WhitePolarize Mode: Negative, TransmissionViewing Angle: 6:00Display Duty: 1/16Driving Bias: 1/5Character Generator ROM (CGROM): 8320 bits (192 characterX5X8 dots) &amp; (32 characterX5X10 dots)Character Generator RAM (CGRAM): 64X8 bits (8 charactersX5X8 dots)Display Data RAM (DDRAM): 40X8 bits (80 characters max)Mechanical characteristics (Unit: mm)External Dimension: 80X36X11View Area : 64.5X14.6Character Font: 5X8 dots + cursorCharacter Size: 2.9X5.15Dots Size:0.54X0.6Character Pitch: 3.52X5.85Weight： gPOWER： +5V 

1602 dot matrix character module MPU interface COB FSTN black background yellow text LCD module

16x2 COB LCD Module FSTN/STN Monochrome LCD Display Directly Connected to M6800 Serial Port MPU Interface with 4-bit or 8-bit MPU (directly connected M6800 serial MPU)Display SpecificationDisplay Character: 16 character X 2 lineCharacter Font:5X8dors+cursorDisplay color-Display background color : POWER： +5VPolarize mode: positive, Transmissive, GrayViewing angle: 6:00Display duty: 1/16Driving bias: 1/5Character Generator ROM (CGROM): 8320 bits (192 characterX5X8 dots) &amp; (32 characterX5X10 dots)Character Generator RAM (CGRAM): 64X8 bits (8 charactersX5X8 dots)Display Data RAM (DDRAM) :40X8 bits (80 characters max)Mechanical characteristics (Unit: mm)External dimension: 80.0X36.0X13.0View area : 64.5X16 Character font: 5X8 dots + cursorCharacter size: 2.96X5.16Dots size:0.56X0.61Character pitch: 3.5 X5.6

1602 dot matrix module MPU interface COB FSTN/STN monochrome character LCD module

Rigid Printed Circuit Board PCB 	 Material : FR-4 	 Layer : Multi Layer---4 Layer / 6 Layer 	 Board Thickness: 1.6mm / 2.0mm / 2.4mm 	 High Tg: Tg150 / Tg170 	 Finishing: Immersion Gold with Thick Gold 	 Solder Mask: Green Color 	 Power Generator ATM Machine Power Supply Ethernet switch control PCB 	 Battery Charge PCB  

Often placed inside generators as well as electronics, this PCB provides efficient conductive pathways for current flow, without any visible wires. Its dual-layer FR-4 housing further finishes off with the popular green solder mask coating to boast durability and reliability.

Features:
&bull; Material: FR-4/CEM-3.
&bull; Slim four-side silhouette.
&bull; Dual-layer housing with green solder mask coating.
&bull; Provide conductive pathways for current flow.
&bull; Guarantee durability and reliability.
&bull; Suitable for a wide range of generators and electronics.
&bull; Layer: 2 layers.
&bull; Thickness: 1.5mm.
&bull; Finishing: OSP Entak.
&bull; High Tg: Tg150, Tg170.
&bull; Solder mask color: green.

Applications:
&bull; Power supply PCB.
&bull; Heavy copper UPS PCB.
&bull; Battery charge PCB.

 	 Luxury desk top touch lamp bluetooth speaker 	 Capacity:1000mAh 	 Input:DC5V 1A 	 Life Circle: &gt;=500 Times 	 Colors: silver,black ect. 	 Dimensions: 121.2*75*75mm 	 Net Weight: 280g 	 Material: ABS case+ 	 Bluetooth version: 3.0 version 	 Speaker: speaker X1 +heavy bass generator X1 	 Speaker output power: 5W (1kHz, THD = 10%) 	 Frequency response: 70Hz-20KHz 	 Signal to noise ratio: 75dB 	 Channel: mono + heavy bass generator 	 Wireless Range: 10 meters 	 Connection mode: AUX interface, Bluetooth connection 	 Play mode: Micro SD card, AUX interface, Bluetooth connection 	 Playing time: 8 hours(playing Bluetooth music only) 	 4 hour(playing Bluetooth music and LED light at the same time) 	 Support: &nbsp;support WAV, MP3, WMA and other formats. 	 Charging time: about 2 hours  

Desk Top Touch Lamp Bluetooth Speaker

The Voltage Dips and Interruptions Generator is specially designed according to the characteristics and requirements of EMS measurement under a sudden reduction or interruption of the voltage at a point. CSS61000-11/ CSS61000-11T uses a big LCD touch screen in both English and Chinese. It has better performance such as high reliability, convenient operation. Standard:IEC 61000-4-11/EN 61000-4-11/GB/T17626.11 “Electromagnetic compatibility (EMC) – Part 4-11: Testing and measuring techniques; Voltage dips, short interruptions and voltage variations immunity tests” Specification: LISUN ModelCSS61000-11CSS61000-11TCSS61000-11T-32ACSS61000-11T-100AWave GeneratorAC Sine WaveRange of Voltage Variations0~110%Built-in IEC Level100%、80%、70%、40%、0%Dip Phase Set0°~360° (1° Step)Duration Time of Voltage Variation0.5~9999.5TInternal Time of Voltage Variation1~9999msVoltage Dip Count0~9999 timesOperating ModeAutomatic dipChoose one to three phases to dip at the same timeTrigger ModeManual, automatic and 50msPower Capacity For EUTSingle phase AC 220V ± 10%, max. 16AThree-phase AC 380V ± 10%, max. 20A/phaseThree-phase AC 380V ± 10%, max. 32A/phaseThree-phase AC 380V ± 10%, max. 100A/phaseWorking PowerAC220V (110V Optional) ±10%, 50/60Hz

Voltage Dips and Interruptions Generator

Tenme Tech Co.,limited

EMS61000-2A ELECTROSTATIC DISCHARGE GENERATOR is a reliable instrument specially designed according to the characteristics and requirements of ESD (Electrostatic Discharge) measurement. Its performance fully conforms to the latest IEC standard IEC 61000-4-2, European electrical standard EN61000-4-2, Chinese standard GB/T17626.2 and ISO10605 regulations. It is suitable for the ESD test of different types of semiconductor devices, electronic circuits and electronic devices. 

EMS61000-2A ESD GENERATOR

Thank you for choosing this disinfection product designed based on the principle of ozone sterilization with thoroughly disinfection in all directions. It can effectively disinfect and sterilize all the things in the confined space by using gas sterilization. It is suitable for multiple scenarios and effectively prevents virus. This manual will help you understand how to use this product. You must know and be familiar with its functional operation before using it.

Matters Needing Attention: 	 Do not disassemble or refit this product, otherwise it will cause damage, leakage and circuit failure. 	 Avoid excessive dampness. Water or other liquid entering the product may cause leakage and failure of this product. 	 Avoid wiping the equipment with volatile solution or organic solvent, which may damage the surface of the product. 	 When releasing ozone, it is strictly prohibited for people to move in the closed ozone environment. After disinfection, you should ventilate for 10 minutes before entering. 	 Must use this product in confined space. 	 As for the children under 12 years of age, please use this product under the guidance of your parents. 	 Please use this product between -10℃ ~ +60℃, and do not use it when the temperature in the car is too high.   #covid19medical

My Sourcing

Unfollow this supplier?

Unfollow this supplier?