Guangxi Max-energy Environmental Technology Co.,Ltd

Intelligent Sewage Treatment TankThe sewage treatmenttank independently developed by Guangxi Max-energy Environmental Technology Co., Ltd. is an upgraded product of an integrated domestic sewage treatment device, which has undergone multiple technological innovations and has beenhighly integration. SMC Sewage treatment tank is a kind of sewage integrated treatment equipment which has the characteristics of high efficiency nitrogen and phosphorus removal is suitable for use in domestic wastewater treatment, it has low-cost, low energy consumption, easy maintenance, it has the advantages of light weight, corrosion resistance, long service life, small footprint, simple construction and installation, easy management, low operating costs. Has the following characteristics: 1.Low investment, good treatment effects, short construction period, easy maintenance; 2.Low power consumption, energysaving, lowdaily operationcosts; 3. Using SMC material mold casting, with stable and reliable quality; 4. Use of Internet of Things (IoT) technology to realize remote mobile management and save labor costs; 5. Low sludge production; 6. Long service life, the service life can reach more than 30 years.       Process description 1. After passing through the septic tank, the sewage from each household is collected by the sewage pipe network. The animal and vegetable oil in the sewage must be removed by a grease trap before entering the sewage pipe network for treatment. 2. After the domestic sewage is collected in the pipeline network, the debris and large particles are separated through the bar screen well to prevent blockage. 3. After separated by the bar screen well the sewage enters into the equalization tank. The purpose to set up equalization tank is to control water quality and water quantityto meet process requirements, so that the water quality and water quantity entering the treatment tank are more stable. 4. The sewage in the equalization tank is pumped to the treatment tank for treatment through a lifting pump. 5. The intelligent sewage treatment tank is designed with five compartments, they are: oil separation and sand sedimentation compartment, anaerobic compartment, anoxic compartment, aerobic compartment and sedimentation compartment. It degrades COD in sewage through the action of microorganisms and realizes denitrification at the same time. 6. After being treated by the intelligent sewage treatment tank, the sewage enters the ecological filter for polished treatment. The sewage is deeply treated by the synergistic effects of artificial media, plants, and microorganisms, ensuring that the sewage is stably discharged in compliance with the standards. The effluent from the ecological filter flows into the nearby water body. 7. The intelligent sewage treatment tank is made of SMC/Glass fiber reinforced plastic material, we provide 1 year warranty for the whole system.      

Johkaso 10m3/Day Domestic Sewage Treatment Plant

Intelligent Sewage Treatment TankThe sewage treatmenttank independently developed by Guangxi Max-energy Environmental Technology Co., Ltd. is an upgraded product of an integrated domestic sewage treatment device, which has undergone multiple technological innovations and has beenhighly integration. SMC Sewage treatment tank is a kind of sewage integrated treatment equipment which has the characteristics of high efficiency nitrogen and phosphorus removal is suitable for use in domestic wastewater treatment, it has low-cost, low energy consumption, easy maintenance, it has the advantages of light weight, corrosion resistance, long service life, small footprint, simple construction and installation, easy management, low operating costs. Has the following characteristics: 1.Low investment, good treatment effects, short construction period, easy maintenance; 2.Low power consumption, energysaving, lowdaily operationcosts; 3. Using SMC material mold casting, with stable and reliable quality; 4. Use of Internet of Things (IoT) technology to realize remote mobile management and save labor costs; 5. Low sludge production; 6. Long service life, the service life can reach more than 30 years.        Process description 1. After passing through the septic tank, the sewage from each household is collected by the sewage pipe network. The animal and vegetable oil in the sewage must be removed by a grease trap before entering the sewage pipe network for treatment. 2. After the domestic sewage is collected in the pipeline network, the debris and large particles are separated through the bar screen well to prevent blockage. 3. After separated by the bar screen well the sewage enters into the equalization tank. The purpose to set up equalization tank is to control water quality and water quantityto meet process requirements, so that the water quality and water quantity entering the treatment tank are more stable. 4. The sewage in the equalization tank is pumped to the treatment tank for treatment through a lifting pump. 5. The intelligent sewage treatment tank is designed with five compartments, they are: oil separation and sand sedimentation compartment, anaerobic compartment, anoxic compartment, aerobic compartment and sedimentation compartment. It degrades COD in sewage through the action of microorganisms and realizes denitrification at the same time. 6. After being treated by the intelligent sewage treatment tank, the sewage enters the ecological filter for polished treatment. The sewage is deeply treated by the synergistic effects of artificial media, plants, and microorganisms, ensuring that the sewage is stably discharged in compliance with the standards. The effluent from the ecological filter flows into the nearby water body. 7. The intelligent sewage treatment tank is made of SMC/Glass fiber reinforced plastic material, we provide 1 year warranty for the whole system.      

AAO+MBBR Sewage Treatment Plant 15m3/d 

Wastewater Treatment Plant Process Design The construction and operation of sewage treatment projects are costly and constrained and influenced by various factors. Among them, the optimization and selection of sewage treatment process proposal have a particularly critical impact on the investment and operation management of sewage treatment. Therefore, it is necessary to start from the perspective of overall optimization, comprehensively consider the properties of sewage and the requirements for treated effluent, and propose the best sewage treatment process plan. Principles of wastewater treatment plant process selection: (1) The process technology is required to be advanced and mature, with high safety, strong oxygenation capacity, high dissolved oxygen concentration, strong oxidation ability, high oxygen utilization rate, and reliable operation, meeting the requirements for treating effluent. (2) Convenient operation and management, flexible operation, and corresponding impact resistance and adaptability to changes in inflow and water quality. (3) Economically reasonable, saving infrastructure investment and operational management costs while meeting processing requirements. (4) The process supporting equipment has advanced technology, reliable quality, small footprint, low investment, and good treatment effect. (5) The automation control of the process is reasonable and reliable, reducing labor intensity. (6) The selection of sludge treatment process and equipment should consider operational flexibility to improve the operability of the sludge treatment process.       A2/OTechnical Process sewage treatment plant adopts A2/O process, which ensures the removal effect of COD, ammonia nitrogen, total nitrogen and also strengthens the removal effect of phosphorus.Sewage treatment plant adopts biofilm process, where microorganisms mainly grow on spherical fillers, which can achieve the separation of hydraulic retention time and sludge retention time, and help to enrich the specialized functional microorganisms which have a long generation time and a good treatment effect, and the biofilm is microbial aggregation with certain thickness, and compared with activated sludge method, biofilm method is more resistant to shock load and the operation of the equipment is more stable. Sewage treatment plant adopts the design concept of low volumetric loading, and the hydraulic retention time is more than 24 hours, which helps to increase the microbial self-oxidizing ability, and improves the quality of the effluent while reducing the production of residual sludge, and reduces the cost of sludge treatment and the cost of construction of sludge tanks. SMC sewage treatment tank is simple and unmanned operation, the use of Internet of Things technology can realize remote mobile management to save operation and maintenance labor costs.    

Reliable Quality PP Materials 40m3/day Sewage Treatment Plant 

Intelligent Sewage Treatment TankThe sewage treatmenttank independently developed by Guangxi Max-energy Environmental Technology Co., Ltd. is an upgraded product of an integrated domestic sewage treatment device, which has undergone multiple technological innovations and has beenhighly integration. SMC Sewage treatment tank is a kind of sewage integrated treatment equipment which has the characteristics of high efficiency nitrogen and phosphorus removal is suitable for use in domestic wastewater treatment, it has low-cost, low energy consumption, easy maintenance, it has the advantages of light weight, corrosion resistance, long service life, small footprint, simple construction and installation, easy management, low operating costs. Has the following characteristics: 1.Low investment, good treatment effects, short construction period, easy maintenance; 2.Low power consumption, energysaving, lowdaily operationcosts; 3. Using SMC material mold casting, with stable and reliable quality; 4. Use of Internet of Things (IoT) technology to realize remote mobile management and save labor costs; 5. Low sludge production; 6. Long service life, the service life can reach more than 30 years.      Process description 1. After passing through the septic tank, the sewage from each household is collected by the sewage pipe network. The animal and vegetable oil in the sewage must be removed by a grease trap before entering the sewage pipe network for treatment. 2. After the domestic sewage is collected in the pipeline network, the debris and large particles are separated through the bar screen well to prevent blockage. 3. After separated by the bar screen well the sewage enters into the equalization tank. The purpose to set up equalization tank is to control water quality and water quantityto meet process requirements, so that the water quality and water quantity entering the treatment tank are more stable. 4. The sewage in the equalization tank is pumped to the treatment tank for treatment through a lifting pump. 5. The intelligent sewage treatment tank is designed with five compartments, they are: oil separation and sand sedimentation compartment, anaerobic compartment, anoxic compartment, aerobic compartment and sedimentation compartment. It degrades COD in sewage through the action of microorganisms and realizes denitrification at the same time. 6. After being treated by the intelligent sewage treatment tank, the sewage enters the ecological filter for polished treatment. The sewage is deeply treated by the synergistic effects of artificial media, plants, and microorganisms, ensuring that the sewage is stably discharged in compliance with the standards. The effluent from the ecological filter flows into the nearby water body. 7. The intelligent sewage treatment tank is made of SMC/Glass fiber reinforced plastic material, we provide 1 year warranty for the whole system.    

OEM Johkasou 5T/D Sewage Treatment Tank 

Intelligent Sewage Treatment TankThe sewage treatmenttank independently developed by Guangxi Max-energy Environmental Technology Co., Ltd. is an upgraded product of an integrated domestic sewage treatment device, which has undergone multiple technological innovations and has beenhighly integration. SMC Sewage treatment tank is a kind of sewage integrated treatment equipment which has the characteristics of high efficiency nitrogen and phosphorus removal is suitable for use in domestic wastewater treatment, it has low-cost, low energy consumption, easy maintenance, it has the advantages of light weight, corrosion resistance, long service life, small footprint, simple construction and installation, easy management, low operating costs. Has the following characteristics: 1.Low investment, good treatment effects, short construction period, easy maintenance; 2.Low power consumption, energysaving, lowdaily operationcosts; 3. Using SMC material mold casting, with stable and reliable quality; 4. Use of Internet of Things (IoT) technology to realize remote mobile management and save labor costs; 5. Low sludge production; 6. Long service life, the service life can reach more than 30 years.         A2/OTechnical Process SMC sewage treatment tank adopts A2/O process, which ensures the removal effect of COD, ammonia nitrogen, total nitrogen and also strengthens the removal effect of phosphorus.SMC sewage treatment tank adopts biofilm process, where microorganisms mainly grow on spherical fillers, which can achieve the separation of hydraulic retention time and sludge retention time, and help to enrich the specialized functional microorganisms which have a long generation time and a good treatment effect, and the biofilm is microbial aggregation with certain thickness, and compared with activated sludge method, biofilm method is more resistant to shock load and the operation of the equipment is more stable. SMC sewage treatment tank adopts the design concept of low volumetric loading, and the hydraulic retention time is more than 24 hours, which helps to increase the microbial self-oxidizing ability, and improves the quality of the effluent while reducing the production of residual sludge, and reduces the cost of sludge treatment and the cost of construction of sludge tanks. SMC sewage treatment tank is simple and unmanned operation, the use of Internet of Things technology can realize remote mobile management to save operation and maintenance labor costs.    

20m3/day Johkaso Domestic Sewage Treatment Plant

Intelligent Sewage Treatment TankThe sewage treatmenttank independently developed by Guangxi Max-energy Environmental Technology Co., Ltd. is an upgraded product of an integrated domestic sewage treatment device, which has undergone multiple technological innovations and has beenhighly integration. SMC Sewage treatment tank is a kind of sewage integrated treatment equipment which has the characteristics of high efficiency nitrogen and phosphorus removal is suitable for use in domestic wastewater treatment, it has low-cost, low energy consumption, easy maintenance, it has the advantages of light weight, corrosion resistance, long service life, small footprint, simple construction and installation, easy management, low operating costs. Has the following characteristics: 1.Low investment, good treatment effects, short construction period, easy maintenance; 2.Low power consumption, energysaving, lowdaily operationcosts; 3. Using SMC material mold casting, with stable and reliable quality; 4. Use of Internet of Things (IoT) technology to realize remote mobile management and save labor costs; 5. Low sludge production; 6. Long service life, the service life can reach more than 30 years.        A2/OTechnical Process SMC sewage treatment tank adopts A2/O process, which ensures the removal effect of COD, ammonia nitrogen, total nitrogen and also strengthens the removal effect of phosphorus.SMC sewage treatment tank adopts biofilm process, where microorganisms mainly grow on spherical fillers, which can achieve the separation of hydraulic retention time and sludge retention time, and help to enrich the specialized functional microorganisms which have a long generation time and a good treatment effect, and the biofilm is microbial aggregation with certain thickness, and compared with activated sludge method, biofilm method is more resistant to shock load and the operation of the equipment is more stable. SMC sewage treatment tank adopts the design concept of low volumetric loading, and the hydraulic retention time is more than 24 hours, which helps to increase the microbial self-oxidizing ability, and improves the quality of the effluent while reducing the production of residual sludge, and reduces the cost of sludge treatment and the cost of construction of sludge tanks. SMC sewage treatment tank is simple and unmanned operation, the use of Internet of Things technology can realize remote mobile management to save operation and maintenance labor costs.      

25m3/day Domestic Sewage Treatment Biogass Plant

Intelligent Sewage Treatment TankThe sewage treatmenttank independently developed by Guangxi Max-energy Environmental Technology Co., Ltd. is an upgraded product of an integrated domestic sewage treatment device, which has undergone multiple technological innovations and has beenhighly integration. SMC Sewage treatment tank is a kind of sewage integrated treatment equipment which has the characteristics of high efficiency nitrogen and phosphorus removal is suitable for use in domestic wastewater treatment, it has low-cost, low energy consumption, easy maintenance, it has the advantages of light weight, corrosion resistance, long service life, small footprint, simple construction and installation, easy management, low operating costs. Has the following characteristics: 1.Low investment, good treatment effects, short construction period, easy maintenance; 2.Low power consumption, energysaving, lowdaily operationcosts; 3. Using SMC material mold casting, with stable and reliable quality; 4. Use of Internet of Things (IoT) technology to realize remote mobile management and save labor costs; 5. Low sludge production; 6. Long service life, the service life can reach more than 30 years.       Process description 1. After passing through the septic tank, the sewage from each household is collected by the sewage pipe network. The animal and vegetable oil in the sewage must be removed by a grease trap before entering the sewage pipe network for treatment. 2. After the domestic sewage is collected in the pipeline network, the debris and large particles are separated through the bar screen well to prevent blockage. 3. After separated by the bar screen well the sewage enters into the equalization tank. The purpose to set up equalization tank is to control water quality and water quantityto meet process requirements, so that the water quality and water quantity entering the treatment tank are more stable. 4. The sewage in the equalization tank is pumped to the treatment tank for treatment through a lifting pump. 5. The intelligent sewage treatment tank is designed with five compartments, they are: oil separation and sand sedimentation compartment, anaerobic compartment, anoxic compartment, aerobic compartment and sedimentation compartment. It degrades COD in sewage through the action of microorganisms and realizes denitrification at the same time. 6. After being treated by the intelligent sewage treatment tank, the sewage enters the ecological filter for polished treatment. The sewage is deeply treated by the synergistic effects of artificial media, plants, and microorganisms, ensuring that the sewage is stably discharged in compliance with the standards. The effluent from the ecological filter flows into the nearby water body. 7. The intelligent sewage treatment tank is made of SMC/Glass fiber reinforced plastic material, we provide 1 year warranty for the whole system.    

SMC Materials 8m3/Day Domestic Sewage Treatment Plant

Intelligent Sewage Treatment TankThe sewage treatmenttank independently developed by Guangxi Max-energy Environmental Technology Co., Ltd. is an upgraded product of an integrated domestic sewage treatment device, which has undergone multiple technological innovations and has beenhighly integration. SMC Sewage treatment tank is a kind of sewage integrated treatment equipment which has the characteristics of high efficiency nitrogen and phosphorus removal is suitable for use in domestic wastewater treatment, it has low-cost, low energy consumption, easy maintenance, it has the advantages of light weight, corrosion resistance, long service life, small footprint, simple construction and installation, easy management, low operating costs. Has the following characteristics: 1.Low investment, good treatment effects, short construction period, easy maintenance; 2.Low power consumption, energysaving, lowdaily operationcosts; 3. Using SMC material mold casting, with stable and reliable quality; 4. Use of Internet of Things (IoT) technology to realize remote mobile management and save labor costs; 5. Low sludge production; 6. Long service life, the service life can reach more than 30 years.        A2/OTechnical Process SMC sewage treatment tank adopts A2/O process, which ensures the removal effect of COD, ammonia nitrogen, total nitrogen and also strengthens the removal effect of phosphorus.SMC sewage treatment tank adopts biofilm process, where microorganisms mainly grow on spherical fillers, which can achieve the separation of hydraulic retention time and sludge retention time, and help to enrich the specialized functional microorganisms which have a long generation time and a good treatment effect, and the biofilm is microbial aggregation with certain thickness, and compared with activated sludge method, biofilm method is more resistant to shock load and the operation of the equipment is more stable. SMC sewage treatment tank adopts the design concept of low volumetric loading, and the hydraulic retention time is more than 24 hours, which helps to increase the microbial self-oxidizing ability, and improves the quality of the effluent while reducing the production of residual sludge, and reduces the cost of sludge treatment and the cost of construction of sludge tanks. SMC sewage treatment tank is simple and unmanned operation, the use of Internet of Things technology can realize remote mobile management to save operation and maintenance labor costs.     

30m3/day Sewage Treatment Plant for Hospital Hotel 

Intelligent Sewage Treatment PlantThe sewage treatment plant independently developed by Guangxi Max-energy Environmental Technology Co., Ltd. is an upgraded product of an integrated domestic sewage treatment device, which has undergone multiple technological innovations and has been highly integration. Sewage treatment plant is a kind of sewage integrated treatment equipment which has the characteristics of high efficiency nitrogen and phosphorus removal is suitable for use in domestic wastewater treatment, it has low-cost, low energy consumption, easy maintenance, it has the advantages of light weight, corrosion resistance, long service life, small footprint, simple construction and installation, easy management, low operating costs. Has the following characteristics: 1.Low investment, good treatment effects, short construction period, easy maintenance; 2.Low power consumption, energysaving, lowdaily operationcosts; 3. Using SMC material mold casting, with stable and reliable quality; 4. Use of Internet of Things (IoT) technology to realize remote mobile management and save labor costs; 5. Low sludge production; 6. Long service life, the service life can reach more than 30 years.     A2/OTechnical Process Sewage treatment plant adopts A2/O process, which ensures the removal effect of COD, ammonia nitrogen, total nitrogen and also strengthens the removal effect of phosphorus. Sewage treatment plant adopts biofilm process, where microorganisms mainly grow on spherical fillers, which can achieve the separation of hydraulic retention time and sludge retention time, and help to enrich the specialized functional microorganisms which have a long generation time and a good treatment effect, and the biofilm is microbial aggregation with certain thickness, and compared with activated sludge method, biofilm method is more resistant to shock load and the operation of the equipment is more stable. Sewage treatment plant adopts the design concept of low volumetric loading, and the hydraulic retention time is more than 24 hours, which helps to increase the microbial self-oxidizing ability, and improves the quality of the effluent while reducing the production of residual sludge, and reduces the cost of sludge treatment and the cost of construction of sludge tanks. Sewage treatment plant is simple and unmanned operation, the use of Internet of Things technology can realize remote mobile management to save operation and maintenance labor costs.    

Biological Treatment 80m3/day Sewage Treatment Plant for Black Water 

Sewage Treatment Plant Process Design The construction and operation of sewage treatment projects are costly and constrained and influenced by various factors. Among them, the optimization and selection of sewage treatment process proposal have a particularly critical impact on the investment and operation management of sewage treatment. Therefore, it is necessary to start from the perspective of overall optimization, comprehensively consider the properties of sewage and the requirements for treated effluent, and propose the best sewage treatment process plan. Process Characteristics @. The process adopts the conventional method,combination of hydrolytic acidification + contact oxidation + precipitation + disinfection, which is mature and reliable. @. The sludge precipitated from the sedimentation tank in the process is lifted to the acidification sedimentation tank for re-nitrification treatment,resulting in a small amount of remaining sludge in the system. @. The working program of the main control equipment such as blowerand submersible pumps in the system is automatically adjusted to reduce the operating workload and achieve automatic work, and unnecessary human damage can be reduced. @. By using the contact oxidation treatment process, which mainly removes organic pollutants, so the removal rate of pollutants can be improved to ensure that the effluent meets the discharge standards; and due to the prolongation of the contact oxidation time, while removing the organic pollutants, NH3-N can also be transformed; @. The processing system is modular, making construction simple and convenient.      AOTechnical Process Sewage treatment tank adopts A2/O process, which ensures the removal effect of COD, ammonia nitrogen, total nitrogen and also strengthens the removal effect of phosphorus.sewage treatment tank adopts biofilm process, where microorganisms mainly grow on spherical fillers, which can achieve the separation of hydraulic retention time and sludge retention time, and help to enrich the specialized functional microorganisms which have a long generation time and a good treatment effect, and the biofilm is microbial aggregation with certain thickness, and compared with activated sludge method, biofilm method is more resistant to shock load and the operation of the equipment is more stable. SMC sewage treatment tank adopts the design concept of low volumetric loading, and the hydraulic retention time is more than 24 hours, which helps to increase the microbial self-oxidizing ability, and improves the quality of the effluent while reducing the production of residual sludge, and reduces the cost of sludge treatment and the cost of construction of sludge tanks. sewage treatment tank is simple and unmanned operation, the use of Internet of Things technology can realize remote mobile management to save operation and maintenance labor costs.    

80M3/Day Domestic Sewage Treatment Plant for Residential Building

Wastewater Treatment Plant Process Design The construction and operation of sewage treatment projects are costly and constrained and influenced by various factors. Among them, the optimization and selection of sewage treatment process proposal have a particularly critical impact on the investment and operation management of sewage treatment. Therefore, it is necessary to start from the perspective of overall optimization, comprehensively consider the properties of sewage and the requirements for treated effluent, and propose the best sewage treatment process plan. Principles of wastewater treatment plant process selection: (1) The process technology is required to be advanced and mature, with high safety, strong oxygenation capacity, high dissolved oxygen concentration, strong oxidation ability, high oxygen utilization rate, and reliable operation, meeting the requirements for treating effluent. (2) Convenient operation and management, flexible operation, and corresponding impact resistance and adaptability to changes in inflow and water quality. (3) Economically reasonable, saving infrastructure investment and operational management costs while meeting processing requirements. (4) The process supporting equipment has advanced technology, reliable quality, small footprint, low investment, and good treatment effect. (5) The automation control of the process is reasonable and reliable, reducing labor intensity. (6) The selection of sludge treatment process and equipment should consider operational flexibility to improve the operability of the sludge treatment process.     A2/OTechnical Process sewage treatment plant adopts A2/O process, which ensures the removal effect of COD, ammonia nitrogen, total nitrogen and also strengthens the removal effect of phosphorus.Sewage treatment plant adopts biofilm process, where microorganisms mainly grow on spherical fillers, which can achieve the separation of hydraulic retention time and sludge retention time, and help to enrich the specialized functional microorganisms which have a long generation time and a good treatment effect, and the biofilm is microbial aggregation with certain thickness, and compared with activated sludge method, biofilm method is more resistant to shock load and the operation of the equipment is more stable. Sewage treatment plant adopts the design concept of low volumetric loading, and the hydraulic retention time is more than 24 hours, which helps to increase the microbial self-oxidizing ability, and improves the quality of the effluent while reducing the production of residual sludge, and reduces the cost of sludge treatment and the cost of construction of sludge tanks. SMC sewage treatment tank is simple and unmanned operation, the use of Internet of Things technology can realize remote mobile management to save operation and maintenance labor costs.    

AAO+MBBR FRP Materials 150m3/day Sewage Treatment Plant 

Wastewater Treatment Process Design The construction and operation of sewage treatment projects are costly and constrained and influenced by various factors. Among them, the optimization and selection of sewage treatment process proposal have a particularly critical impact on the investment and operation management of sewage treatment. Therefore, it is necessary to start from the perspective of overall optimization, comprehensively consider the properties of sewage and the requirements for treated effluent, and propose the best sewage treatment process plan. Principles of wastewater treatment process selection: (1) The process technology is required to be advanced and mature, with high safety, strong oxygenation capacity, high dissolved oxygen concentration, strong oxidation ability, high oxygen utilization rate, and reliable operation, meeting the requirements for treating effluent. (2) Convenient operation and management, flexible operation, and corresponding impact resistance and adaptability to changes in inflow and water quality. (3) Economically reasonable, saving infrastructure investment and operational management costs while meeting processing requirements. (4) The process supporting equipment has advanced technology, reliable quality, small footprint, low investment, and good treatment effect. (5) The automation control of the process is reasonable and reliable, reducing labor intensity. (6) The selection of sludge treatment process and equipment should consider operational flexibility to improve the operability of the sludge treatment process.    Process Description The sewage enters the sewage plant, intercepts suspended solids through the grid, and then flows into the sedimentation tank by gravity; Due to the different water quality and quantity from different periods, the peak flow rate of domestic sewage is generally 3-6 times the average treatment capacity. To ensure continuous operation of the system, a regulating tank is used to regulate the water quantity and homogenize the water quality, while also removing and reducing some pollutant loads. After being collected by the drainage system, the sewage enters the grid well of the sewage treatment plant. After removing particles and debris, it enters the regulating tank for homogenization and equalization. A liquid level controller is installed in the regulating tank, and then the signal is transmitted by the liquid level controller. It is pumped by the lifting pump to the A-level biological contact oxidation tank for acidification, hydrolysis, nitrification and denitrification, reducing the concentration of organic matter, removing some ammonia nitrogen, and then flows into the O-level biological contact oxidation tank for aerobic biochemical reaction, The vast majority of organic pollutants in the O-level biological tank are degraded through biological oxidation and adsorption, and the effluent flows to the secondary sedimentation tank for solid-liquid separation.     

90Ton/Day Sewage Treatment Plant for Hospital Hotel Wastewater

Wastewater Treatment Plant Process Design The construction and operation of sewage treatment projects are costly and constrained and influenced by various factors. Among them, the optimization and selection of sewage treatment process proposal have a particularly critical impact on the investment and operation management of sewage treatment. Therefore, it is necessary to start from the perspective of overall optimization, comprehensively consider the properties of sewage and the requirements for treated effluent, and propose the best sewage treatment process plan. Principles of wastewater treatment plant process selection: (1) The process technology is required to be advanced and mature, with high safety, strong oxygenation capacity, high dissolved oxygen concentration, strong oxidation ability, high oxygen utilization rate, and reliable operation, meeting the requirements for treating effluent. (2) Convenient operation and management, flexible operation, and corresponding impact resistance and adaptability to changes in inflow and water quality. (3) Economically reasonable, saving infrastructure investment and operational management costs while meeting processing requirements. (4) The process supporting equipment has advanced technology, reliable quality, small footprint, low investment, and good treatment effect. (5) The automation control of the process is reasonable and reliable, reducing labor intensity. (6) The selection of sludge treatment process and equipment should consider operational flexibility to improve the operability of the sludge treatment process.     A2/OTechnical Process sewage treatment plant adopts A2/O process, which ensures the removal effect of COD, ammonia nitrogen, total nitrogen and also strengthens the removal effect of phosphorus.Sewage treatment plant adopts biofilm process, where microorganisms mainly grow on spherical fillers, which can achieve the separation of hydraulic retention time and sludge retention time, and help to enrich the specialized functional microorganisms which have a long generation time and a good treatment effect, and the biofilm is microbial aggregation with certain thickness, and compared with activated sludge method, biofilm method is more resistant to shock load and the operation of the equipment is more stable. Sewage treatment plant adopts the design concept of low volumetric loading, and the hydraulic retention time is more than 24 hours, which helps to increase the microbial self-oxidizing ability, and improves the quality of the effluent while reducing the production of residual sludge, and reduces the cost of sludge treatment and the cost of construction of sludge tanks. SMC sewage treatment tank is simple and unmanned operation, the use of Internet of Things technology can realize remote mobile management to save operation and maintenance labor costs.     

AAO+MBBR PP Materials 110m3/day Sewage Treatment Plant 

Wastewater Treatment Process Design The construction and operation of sewage treatment projects are costly and constrained and influenced by various factors. Among them, the optimization and selection of sewage treatment process proposal have a particularly critical impact on the investment and operation management of sewage treatment. Therefore, it is necessary to start from the perspective of overall optimization, comprehensively consider the properties of sewage and the requirements for treated effluent, and propose the best sewage treatment process plan. Principles of wastewater treatment process selection: (1) The process technology is required to be advanced and mature, with high safety, strong oxygenation capacity, high dissolved oxygen concentration, strong oxidation ability, high oxygen utilization rate, and reliable operation, meeting the requirements for treating effluent. (2) Convenient operation and management, flexible operation, and corresponding impact resistance and adaptability to changes in inflow and water quality. (3) Economically reasonable, saving infrastructure investment and operational management costs while meeting processing requirements. (4) The process supporting equipment has advanced technology, reliable quality, small footprint, low investment, and good treatment effect. (5) The automation control of the process is reasonable and reliable, reducing labor intensity. (6) The selection of sludge treatment process and equipment should consider operational flexibility to improve the operability of the sludge treatment process.     Process Description The sewage enters the sewage plant, intercepts suspended solids through the grid, and then flows into the sedimentation tank by gravity; Due to the different water quality and quantity from different periods, the peak flow rate of domestic sewage is generally 3-6 times the average treatment capacity. To ensure continuous operation of the system, a regulating tank is used to regulate the water quantity and homogenize the water quality, while also removing and reducing some pollutant loads. After being collected by the drainage system, the sewage enters the grid well of the sewage treatment plant. After removing particles and debris, it enters the regulating tank for homogenization and equalization. A liquid level controller is installed in the regulating tank, and then the signal is transmitted by the liquid level controller. It is pumped by the lifting pump to the A-level biological contact oxidation tank for acidification, hydrolysis, nitrification and denitrification, reducing the concentration of organic matter, removing some ammonia nitrogen, and then flows into the O-level biological contact oxidation tank for aerobic biochemical reaction, The vast majority of organic pollutants in the O-level biological tank are degraded through biological oxidation and adsorption, and the effluent flows to the secondary sedimentation tank for solid-liquid separation.     

100Ton/Day Sewage Treatment Plant for Residential Building

Intelligent Sewage Treatment TankThe sewage treatmenttank independently developed by Guangxi Max-energy Environmental Technology Co., Ltd. is an upgraded product of an integrated domestic sewage treatment device, which has undergone multiple technological innovations and has beenhighly integration. SMC Sewage treatment tank is a kind of sewage integrated treatment equipment which has the characteristics of high efficiency nitrogen and phosphorus removal is suitable for use in domestic wastewater treatment, it has low-cost, low energy consumption, easy maintenance, it has the advantages of light weight, corrosion resistance, long service life, small footprint, simple construction and installation, easy management, low operating costs. Has the following characteristics: 1.Low investment, good treatment effects, short construction period, easy maintenance; 2.Low power consumption, energysaving, lowdaily operationcosts; 3. Using SMC material mold casting, with stable and reliable quality; 4. Use of Internet of Things (IoT) technology to realize remote mobile management and save labor costs; 5. Low sludge production; 6. Long service life, the service life can reach more than 30 years.      A2/OTechnical Process SMC sewage treatment tank adopts A2/O process, which ensures the removal effect of COD, ammonia nitrogen, total nitrogen and also strengthens the removal effect of phosphorus.SMC sewage treatment tank adopts biofilm process, where microorganisms mainly grow on spherical fillers, which can achieve the separation of hydraulic retention time and sludge retention time, and help to enrich the specialized functional microorganisms which have a long generation time and a good treatment effect, and the biofilm is microbial aggregation with certain thickness, and compared with activated sludge method, biofilm method is more resistant to shock load and the operation of the equipment is more stable. SMC sewage treatment tank adopts the design concept of low volumetric loading, and the hydraulic retention time is more than 24 hours, which helps to increase the microbial self-oxidizing ability, and improves the quality of the effluent while reducing the production of residual sludge, and reduces the cost of sludge treatment and the cost of construction of sludge tanks. SMC sewage treatment tank is simple and unmanned operation, the use of Internet of Things technology can realize remote mobile management to save operation and maintenance labor costs.        

OEM 50m3/day Sewage Treatment Plant for Hotel Restaurant

Intelligent Sewage Treatment PlantThe sewage treatment plant independently developed by Guangxi Max-energy Environmental Technology Co., Ltd. is an upgraded product of an integrated domestic sewage treatment device, which has undergone multiple technological innovations and has been highly integration. Sewage treatment plant is a kind of sewage integrated treatment equipment which has the characteristics of high efficiency nitrogen and phosphorus removal is suitable for use in domestic wastewater treatment, it has low-cost, low energy consumption, easy maintenance, it has the advantages of light weight, corrosion resistance, long service life, small footprint, simple construction and installation, easy management, low operating costs. Has the following characteristics: 1.Low investment, good treatment effects, short construction period, easy maintenance; 2.Low power consumption, energysaving, lowdaily operationcosts; 3. Using SMC material mold casting, with stable and reliable quality; 4. Use of Internet of Things (IoT) technology to realize remote mobile management and save labor costs; 5. Low sludge production; 6. Long service life, the service life can reach more than 30 years.      A2/OTechnical Process Sewage treatment plant adopts A2/O process, which ensures the removal effect of COD, ammonia nitrogen, total nitrogen and also strengthens the removal effect of phosphorus. Sewage treatment plant adopts biofilm process, where microorganisms mainly grow on spherical fillers, which can achieve the separation of hydraulic retention time and sludge retention time, and help to enrich the specialized functional microorganisms which have a long generation time and a good treatment effect, and the biofilm is microbial aggregation with certain thickness, and compared with activated sludge method, biofilm method is more resistant to shock load and the operation of the equipment is more stable. Sewage treatment plant adopts the design concept of low volumetric loading, and the hydraulic retention time is more than 24 hours, which helps to increase the microbial self-oxidizing ability, and improves the quality of the effluent while reducing the production of residual sludge, and reduces the cost of sludge treatment and the cost of construction of sludge tanks. Sewage treatment plant is simple and unmanned operation, the use of Internet of Things technology can realize remote mobile management to save operation and maintenance labor costs.     

70m3/day Sewage Treatment Plant for Hotel  Residential Building

60m3/day Sewage Treatment Plant for Hotel  Residential Building

Wastewater Treatment Plant Process Design The construction and operation of sewage treatment projects are costly and constrained and influenced by various factors. Among them, the optimization and selection of sewage treatment process proposal have a particularly critical impact on the investment and operation management of sewage treatment. Therefore, it is necessary to start from the perspective of overall optimization, comprehensively consider the properties of sewage and the requirements for treated effluent, and propose the best sewage treatment process plan. Principles of wastewater treatment plant process selection: (1) The process technology is required to be advanced and mature, with high safety, strong oxygenation capacity, high dissolved oxygen concentration, strong oxidation ability, high oxygen utilization rate, and reliable operation, meeting the requirements for treating effluent. (2) Convenient operation and management, flexible operation, and corresponding impact resistance and adaptability to changes in inflow and water quality. (3) Economically reasonable, saving infrastructure investment and operational management costs while meeting processing requirements. (4) The process supporting equipment has advanced technology, reliable quality, small footprint, low investment, and good treatment effect. (5) The automation control of the process is reasonable and reliable, reducing labor intensity. (6) The selection of sludge treatment process and equipment should consider operational flexibility to improve the operability of the sludge treatment process.     A2/OTechnical Process sewage treatment plant adopts A2/O process, which ensures the removal effect of COD, ammonia nitrogen, total nitrogen and also strengthens the removal effect of phosphorus.Sewage treatment plant adopts biofilm process, where microorganisms mainly grow on spherical fillers, which can achieve the separation of hydraulic retention time and sludge retention time, and help to enrich the specialized functional microorganisms which have a long generation time and a good treatment effect, and the biofilm is microbial aggregation with certain thickness, and compared with activated sludge method, biofilm method is more resistant to shock load and the operation of the equipment is more stable. Sewage treatment plant adopts the design concept of low volumetric loading, and the hydraulic retention time is more than 24 hours, which helps to increase the microbial self-oxidizing ability, and improves the quality of the effluent while reducing the production of residual sludge, and reduces the cost of sludge treatment and the cost of construction of sludge tanks. SMC sewage treatment tank is simple and unmanned operation, the use of Internet of Things technology can realize remote mobile management to save operation and maintenance labor costs.  

FRP Materials 120m3/day Sewage Treatment Plant AAO+MBBR

Intelligent Sewage Treatment PlantThe sewage treatment plant independently developed by Guangxi Max-energy Environmental Technology Co., Ltd. is an upgraded product of an integrated domestic sewage treatment device, which has undergone multiple technological innovations and has been highly integration. SMC sewage treatment plant is a kind of sewage integrated treatment equipment which has the characteristics of high efficiency nitrogen and phosphorus removal is suitable for use in domestic wastewater treatment, it has low-cost, low energy consumption, easy maintenance, it has the advantages of light weight, corrosion resistance, long service life, small footprint, simple construction and installation, easy management, low operating costs. Has the following characteristics: 1.Low investment, good treatment effects, short construction period, easy maintenance; 2.Low power consumption, energysaving, lowdaily operationcosts; 3. Using SMC material mold casting, with stable and reliable quality; 4. Use of Internet of Things (IoT) technology to realize remote mobile management and save labor costs; 5. Low sludge production; 6. Long service life, the service life can reach more than 30 years.      A2/OProcess SMC sewage treatment plant adopts A2/O process, which ensures the removal effect of COD, ammonia nitrogen, total nitrogen and also strengthens the removal effect of phosphorus.SMC domestic wastewater treatment plant adopts biological process, where microorganisms mainly grow on spherical filler media, which can achieve the separation of hydraulic retention time and sludge retention time, and help to enrich the specialized functional microorganisms which have a long generation time and a good treatment effect, and the biological is microbial aggregation with certain thickness, and compared with activated sludge method, biofilm method is more resistant to shock load and the operation of the equipment is more stable. SMC domestic wastewater treatment plant adopts the design concept of low volumetric loading, and the hydraulic retention time is more than 24 hours, which helps to increase the microbial self-oxidizing ability, and improves the quality of the effluent while reducing the production of residual sludge, and reduces the cost of sludge treatment and the cost of construction of sludge tanks. SMC domestic wastewater treatment plant is simple and unmanned operation, the use of Internet of Things technology can realize remote mobile management to save operation and maintenance labor costs.  (1) Anaerobic, anoxic, and aerobic, the combination of three different environmental conditions and microbial communities are capable of simultaneously removing organic matter and nitrogen and phosphorus. (2) In the process of simultaneous deoxygenation, phosphorus removal, and organic matter removal, this process flow is the simplest, and the total hydraulic retention time is also less than other similar processes.       

5T/D Sewage Treatment Plant  AAO+MBBR Biogas Plant for Villas

Intelligent Sewage Treatment PlantThe sewage treatment plant independently developed by Guangxi Max-energy Environmental Technology Co., Ltd. is an upgraded product of an integrated domestic sewage treatment device, which has undergone multiple technological innovations and has been highly integration. SMC sewage treatment plant is a kind of sewage integrated treatment equipment which has the characteristics of high efficiency nitrogen and phosphorus removal is suitable for use in domestic wastewater treatment, it has low-cost, low energy consumption, easy maintenance, it has the advantages of light weight, corrosion resistance, long service life, small footprint, simple construction and installation, easy management, low operating costs. Has the following characteristics: 1.Low investment, good treatment effects, short construction period, easy maintenance; 2.Low power consumption, energysaving, lowdaily operationcosts; 3. Using SMC material mold casting, with stable and reliable quality; 4. Use of Internet of Things (IoT) technology to realize remote mobile management and save labor costs; 5. Low sludge production; 6. Long service life, the service life can reach more than 30 years.      A2/OProcess SMC sewage treatment plant adopts A2/O process, which ensures the removal effect of COD, ammonia nitrogen, total nitrogen and also strengthens the removal effect of phosphorus.SMC sewage treatment plant adopts biological process, where microorganisms mainly grow on spherical filler media, which can achieve the separation of hydraulic retention time and sludge retention time, and help to enrich the specialized functional microorganisms which have a long generation time and a good treatment effect, and the biological is microbial aggregation with certain thickness, and compared with activated sludge method, biofilm method is more resistant to shock load and the operation of the equipment is more stable. SMC sewage treatment plant adopts the design concept of low volumetric loading, and the hydraulic retention time is more than 24 hours, which helps to increase the microbial self-oxidizing ability, and improves the quality of the effluent while reducing the production of residual sludge, and reduces the cost of sludge treatment and the cost of construction of sludge tanks. SMC sewage treatment plant is simple and unmanned operation, the use of Internet of Things technology can realize remote mobile management to save operation and maintenance labor costs. (1) Anaerobic, anoxic, and aerobic, the combination of three different environmental conditions and microbial communities are capable of simultaneously removing organic matter and nitrogen and phosphorus. (2) In the process of simultaneous deoxygenation, phosphorus removal, and organic matter removal, this process flow is the simplest, and the total hydraulic retention time is also less than other similar processes.   

OEM Johkasou 2T/D Sewage Treatment Plant for Household 

The sewage treatmenttank independently developed by Guangxi Max-energy Environmental Technology Co., Ltd. is an upgraded product of an integrated domestic sewage treatment device, which has undergone multiple technological innovations and has beenhighly integration. SMC Sewage treatment tank is a kind of sewage integrated treatment equipment which has the characteristics of high efficiency nitrogen and phosphorus removal is suitable for use in domestic wastewater treatment, it has low-cost, low energy consumption, easy maintenance, it has the advantages of light weight, corrosion resistance, long service life, small footprint, simple construction and installation, easy management, low operating costs. Has the following characteristics: 1.Low investment, good treatment effects, short construction period, easy maintenance; 2.Low power consumption, energysaving, lowdaily operationcosts; 3. Using SMC material mold casting, with stable and reliable quality; 4. Use of Internet of Things (IoT) technology to realize remote mobile management and save labor costs; 5. Low sludge production; 6. Long service life, the service life can reach more than 30 years.        A2/OTechnical Process SMC sewage treatment tank adopts A2/O process, which ensures the removal effect of COD, ammonia nitrogen, total nitrogen and also strengthens the removal effect of phosphorus.SMC sewage treatment tank adopts biofilm process, where microorganisms mainly grow on spherical fillers, which can achieve the separation of hydraulic retention time and sludge retention time, and help to enrich the specialized functional microorganisms which have a long generation time and a good treatment effect, and the biofilm is microbial aggregation with certain thickness, and compared with activated sludge method, biofilm method is more resistant to shock load and the operation of the equipment is more stable. SMC sewage treatment tank adopts the design concept of low volumetric loading, and the hydraulic retention time is more than 24 hours, which helps to increase the microbial self-oxidizing ability, and improves the quality of the effluent while reducing the production of residual sludge, and reduces the cost of sludge treatment and the cost of construction of sludge tanks. SMC sewage treatment tank is simple and unmanned operation, the use of Internet of Things technology can realize remote mobile management to save operation and maintenance labor costs.  (1) Anaerobic, anoxic, and aerobic, the combination of three different environmental conditions and microbial communities are capable of simultaneously removing organic matter and nitrogen and phosphorus. (2) In the process of simultaneous deoxygenation, phosphorus removal, and organic matter removal, this process flow is the simplest, and the total hydraulic retention time is also less than other similar processes. (3) The phosphorus content in sludge is high, generally above 2.5%.    

Johkaso 2T/D Sewage Treatment Tank for Black Water

The sewage treatmenttank independently developed by Guangxi Max-energy Environmental Technology Co., Ltd. is an upgraded product of an integrated domestic sewage treatment device, which has undergone multiple technological innovations and has beenhighly integration. SMC Sewage treatment tank is a kind of sewage integrated treatment equipment which has the characteristics of high efficiency nitrogen and phosphorus removal is suitable for use in domestic wastewater treatment, it has low-cost, low energy consumption, easy maintenance, it has the advantages of light weight, corrosion resistance, long service life, small footprint, simple construction and installation, easy management, low operating costs. Has the following characteristics: 1.Low investment, good treatment effects, short construction period, easy maintenance; 2.Low power consumption, energysaving, lowdaily operationcosts; 3. Using SMC material mold casting, with stable and reliable quality; 4. Use of Internet of Things (IoT) technology to realize remote mobile management and save labor costs; 5. Low sludge production; 6. Long service life, the service life can reach more than 30 years.      A2/OTechnical Process SMC sewage treatment tank adopts A2/O process, which ensures the removal effect of COD, ammonia nitrogen, total nitrogen and also strengthens the removal effect of phosphorus.SMC sewage treatment tank adopts biofilm process, where microorganisms mainly grow on spherical fillers, which can achieve the separation of hydraulic retention time and sludge retention time, and help to enrich the specialized functional microorganisms which have a long generation time and a good treatment effect, and the biofilm is microbial aggregation with certain thickness, and compared with activated sludge method, biofilm method is more resistant to shock load and the operation of the equipment is more stable. SMC sewage treatment tank adopts the design concept of low volumetric loading, and the hydraulic retention time is more than 24 hours, which helps to increase the microbial self-oxidizing ability, and improves the quality of the effluent while reducing the production of residual sludge, and reduces the cost of sludge treatment and the cost of construction of sludge tanks. SMC sewage treatment tank is simple and unmanned operation, the use of Internet of Things technology can realize remote mobile management to save operation and maintenance labor costs.  (1) Anaerobic, anoxic, and aerobic, the combination of three different environmental conditions and microbial communities are capable of simultaneously removing organic matter and nitrogen and phosphorus. (2) In the process of simultaneous deoxygenation, phosphorus removal, and organic matter removal, this process flow is the simplest, and the total hydraulic retention time is also less than other similar processes. (3) The phosphorus content in sludge is high, generally above 2.5%.    

1T/D Sewage Treatment Plant AAO+MBBR Process

The sewage treatment plant independently developed by Guangxi Max-energy Environmental Technology Co., Ltd. is an upgraded product of an integrated domestic sewage treatment device, which has undergone multiple technological innovations and has been highly integration.SMC sewage treatment plant is a kind of sewage integrated treatment equipment which has the characteristics of high efficiency nitrogen and phosphorus removal is suitable for use in domestic wastewater treatment, it has low-cost, low energy consumption, easy maintenance, it has the advantages of light weight, corrosion resistance, long service life, small footprint, simple construction and installation, easy management, low operating costs. Has the following characteristics:1. Low investment, good treatment effects, short construction period, easy maintenance; 2. Low power consumption, energy saving, low daily operation costs; 3. Using SMC material mold casting, with stable and reliable quality; 4. Use of Internet of Things (IoT) technology to realize remote mobile management and save labor costs; 5. Low sludge production; 6. Long service life, the service life can reach more than 30 years.  Sewage Treatment Plant Product Model List: TypeCapacity（m³/d）Dimension（mm）Manholes（mm）Power（W）Voltage（V）MaterialMAE-0.50.51900*1050*1200φ400*238220SMCMAE-112400*1300*1400φ400*245220SMCMAE-222150*1150*1650φ630*255220SMCMAE-552420*2010*2000φ630*2110220SMCMAE-883420*2010*2000φ630*3110220SMCMAE-10104420*2010*2000φ630*4170220SMCMAE-15155420*2010*2000φ630*5220220SMCMAE-20207420*2010*2000φ630*6350220SMCMAE-25258420*2010*2000φ630*6470220SMCMAE-303010420*2010*2000φ630*6470220SMC Sewage Treatment Equipment Technical Process: A2/O Process SMC wastewater treatment plant adopts A2/O process, which ensures the removal effect of COD, ammonia nitrogen, total nitrogen and also strengthens the removal effect of phosphorus.SMC wastewater treatment plant adopts biofilm process, where microorganisms mainly grow on spherical fillers, which can achieve the separation of hydraulic retention time and sludge retention time, and help to enrich the specialized functional microorganisms which have a long generation time and a good treatment effect, and the biofilm is microbial aggregation with certain thickness, and compared with activated sludge method, biofilm method is more resistant to shock load and the operation of the equipment is more stable. SMC wastewater treatment plant adopts the design concept of low volumetric loading, and the hydraulic retention time is more than 24 hours, which helps to increase the microbial self-oxidizing ability, and improves the quality of the effluent while reducing the production of residual sludge, and reduces the cost of sludge treatment and the cost of construction of sludge tanks. SMC wastewater treatment plant is simple and unmanned operation, the use of Internet of Things technology can realize remote mobile management to save operation and maintenance labor costs.     

0.5T/D Domestic Sewage Treatment Plant AAO+MBBR Process 

Pengkai Environment Technology Corp.

PK Round - Low-Carbon Assembled Sewage Treatment System - Efficient Denitrogenation Process Integrated Airlift Loop Bioreactor ( abbreviated as DIAB process ). Adhering to the three concepts of "engineering equipment, equipment standardization, and intelligent operation and maintenance" , it has achieved a leapfrog upgrades from version 1.0 to version 4.0, providing replicable "technical productization" solutions for the construction, expansion, and upgrading of urban sewage plants.  PK RoundCore Strengths: Save money: invest 20% less; Less land: 1/3 of the floor area; Faster: 1/4 construction cycle; More energy saving: energy consumption is reduced by 1/5; Smarter: Smart cloud platform.  PK Round applications: 1. Construction, expansion and upgrading of urban sewage plants 2. Construction of emergency sewage treatment plant 3, water environment (black smelly water) control 4, industrial park sewage treatment plant 5. Other sewage treatment plants with different needs  Service advantage: 15 Years Production Experience ISO9001:2015 National Hi &amp; New Tech Enterprise Direct Factory Price Free Proposal Design Overseas Installation &amp; Commissioning Service Fast Delivery Quality Assurance 

My Sourcing

Unfollow this supplier?

Unfollow this supplier?