LISUN ELECTRONICS (SHANGHAI) CO., LTD

Temperature Humidity Chamber | Thermal Chamber | Climate Chamber simulate different climatic conditions, such as heat-endurance, cold endurance, dryness-endurance and humidity-endurance which defines the performance of material. By testing the product under different climatic conditions to see whether its performance can meet the intended requirements. It is widely used to test the CFL/LED, electricity products, automative cars, home appications and mobiles. This series of aging test chamber is suitable for the reliability test of industrial products. It has the characteristics of temperature and humidity control precision and wide control range. Standard:IEC60068-2-1 ” Environmental testing – Part 2-1: Tests – Test A: Cold”IEC60068-2-2 “Environmental testing – Part 2-2: Tests – Test B: Dry heat”IEC60068-2-78 “Environmental testing – Part 2-78: Tests – Test Cab: Damp heat, steady state”IEC60598-1 “Luminaires – Part 1: General requirements and tests”IES LM-80-08 “Approved Method: Measuring Lumen Maintenance of LED Light “GB/T2423.17 “Environmental testing for electric and electronic products – Part 2: Test method – Test Ka: Salt mist”GB/T5170.2 “Inspection methods for environmental testing equipment for electric and electronic products — Temperature testing equipment”GB/T5170.5 “Inspection methods for environmental testing equipments for electric and electronic products―Part 5:Damp heat testing equipments” What is a Climate Chamber?Climate chamber is used to simulate a temperature environmental condistions. It may also be called environmental chambers or thermal chamber or temperature chamber. You can click the below videos to learn the details and also how to operate it. Specification:• The temperature humidity test chamber is made of SUS304 Steel. The thermal insulation layer is made of polyurethane hard foam ultra-fine glass fiber. The heat-insulated doorframe uses high temperature aging silicone rubber sealing strip.• The temperature controller of the climate chamber includes Korean TEMI display in English/Chinese and German Siemens PLC. It can communicate with PC via RS-232. The temperature accuracy is 0.1℃ and humidity accuracy is 0.1%R.H.• The temperature sensor is platinum PT100Ω/MV.• The independant heating system uses nickel-chrome electric heater.• The refrigerating system is fully enclosed air-cooled single-stage compression refrigeration mode, and the compressor is from France TECUMSEH brand which can allow you get after sales support from many other countries.• The circulation system uses temperature resistant and low noise air-conditioned motor and multi-blade centrifugal wind wheel.• The safety protection system includes electric leakage, short circuit, over temperature, motor overheating, compressor pressure, overload, over-current protection.• Working Voltage: AC380V±10% 3 phases and frequency 50Hz/60Hz• Working Environmental: Temperature 5℃～+30℃ and Humidity ≤85%R.H  

Temperature Humidity Chamber | Thermal Chamber

Mass Sun Limited

  Personal tracking system has built-in 512K memory and lithium battery 3.6V 1600mAH  This tracking system has automatic sleep and wake up modes base on movement  Siemens GPRS and leadtek SIRF III GPS modules  Emergency call dialing  

Car Tracking System

Jiangsu Sainty Co Ltd

  Accessories for electric coffee machine.  High temperature glass (170 degree).  Solac, Philips  Moulinex  Ufesa  Braun  Fagor  Mellta  Siemens  

Coffee Jug (170 degree)

Linghao Battery (HK) Co Ltd

 	 Standard or non-standard battery packs for cordless phone, FRS, small walkie-talkie, GMR, etc.. Those batteries are compatible to those products manufactured by Panasonic, Uniden, Sony, Daewoo, Samsung, Philips, Siemens, Cobra, Motorola, Midland, vtech, etc.. 	 General specification: 	 Size: 2 x AAA, 2 x 7/6AAA, 3 x AAA, 3 x 7/6AAA, 4 x AAA, 3 x AA, etc. 	 Voltage: 2.4V, 3.6V, 4.8V 	 Capacity: 600mAh to 1500mAh 	 Detail specification can be provided per required model  

FRS, Walkie-talkie, GMR, Cordless Phone Battery

Orbita Technology Co., Ltd

  Potential card types are siemens SLE 4442 IC card  Hotel IC card lock is made of cast stainless steel  Durable hotel IC card lock is finished with golden POD coating  Elegant card lock is compliant to US standard with 5 latch mortise and Euro standard mortise  

Hotel IC Card Lock

Zhongshan Katro Electrical Appliances Co., Ltd.

 	 Rating: 220v-240v, 50/60Hz 	 Induction cooker with touch control 	 4 digital LED display, real power 2000W 	 9 power/temperature levels for adjustment 	 A grade black crystal plate 280 x 355mm 	 High/low heating or voltage protection 	 Automatically shut off if lack of pot or the pot is empty 	 Multiple functions and timer, lock setting 	 High quality 100% pure copper coil and high quality Siemens IGBT  

Induction Cooker

 	 Rating: 220-240V, 50/60Hz 	 Induction cooker with touch control 	 4 digital LED display, Real power 2000W 	 10 power/temperature levels for adjustment 	 A grade black crystal plate 294 x 374mm 	 Ultra-thin design with various color 	 High/low heating or voltage protection 	 Automatically shut off if lack of pot or the pot is empty 	 Multiple functions and timer, lock setting 	 Electricity consumed can be checked 	 High quality 100% pure copper coil and high quality Siemens IGBT  

Ultra Slim Induction Cooker

 	 Rating: 80-270V, 50/60Hz 	 Induction cooker with press control 	 Digital led display, real power 1300W 	 10 power/temperature levels for adjustment 	 A grade ceramic plate 250 x 250mm 	 High/low heating or voltage protection 	 Automatically shut off if lack of pot or the pot is empty 	 Multiple functions and timer, lock setting 	 High quality Siemens IGBT  

 	 Built in 3 burner induction cooker 	 Rating: 80-270V, 50-60Hz, power 7000W 	 Touch control 	 4 digital red led display 	 8 power/temperature levels for adjustment 	 A grade black crystal glass 	 Automatically shut off if lack of pot or the pot is empty 	 High/low heating or voltage protection 	 Multiple functions and time setting 	 Electricity consumed can be checked 	 High quality coil, big PCB with high quality Siemens IGBT 20A  

3 Burners Induction Cooker

 	 Rating: 220-240V, 50/60Hz 	 Induction cooker with touch control 	 Digital led display, real power 2000W 	 10 power/temperature levels for adjustment 	 A grade black crystal plate 270 x 310mm 	 High/low heating or voltage protection 	 Automatically shut off if lack of pot or the pot is empty 	 Multiple functions and timer, lock setting 	 Electricity consumed can be checked 	 High quality 100% pure copper coil and high quality Siemens IGBT  

 	 Built in 4 burner induction cooker 	 Rating: 80-270V, 50-60Hz, power 7000W 	 Touch control 	 4 digital red led display 	 8 power/temperature levels for adjustment 	 A grade black crystal glass 	 Automatically shut off if lack of pot or the pot is empty 	 High/low heating or voltage protection 	 Multiple functions and time setting 	 Electricity consumed can be checked 	 High quality coil, big PCB with high quality Siemens IGBT 20A  

4 Burners Infrared Cooker

China Palm Air Conditioning & Equipment Co Ltd

   New generation heat pump product developed with the most advanced heating technologies.   Utilized the energy from surrounding air and converts it to the hot water for source air conditioning heating-cooling and domestic hot water supply.   Strictly tested with our European partners to make sure the best quality.   Super low&nbsp; working temperature.-15 degree to 43 degree.   Top brand components, such as Daikin compressor, Siemens, Wilo for the most reliability &amp; quality.  Striking characters distinguish from other products:
   High efficiency and energy saving.   Environmental friendly refrigerant R410A.   Emersion expansion valve to make the accurate regulation.   Pressure protection low temperature production to keep the system safety.   A/C tank inside, easy installation.  Other characters: 
   Stainless steel plate heat exchanger with maximum pressure 40 bar.   Microprocessor control and error alarm and display.  

Air Source Heat Pump

 	 Rating: 220-240V, 50/60Hz 	 Induction cooker with switch control 	 Digital led display, Real power 2000W&nbsp; 	 10 power/temperature levels for adjustment 	 A grade black crystal plate 295 x 260mm 	 High/low heating or voltage protection&nbsp; 	 Automatically shut off if lack of pot or the pot is empty 	 Multiple functions and timer, the lock setting&nbsp; 	 Electricity consumed can be checked&nbsp; 	 High quality 100% pure copper coil and high-quality siemens IGBT  

Induction Cooker with Knob

 	 Built in double induction cooker, Rating: 220-240V, 50-60Hz, Power 1600+1300W 	 Touch &amp; knob control 	 4 digital red led display 	 8 power/temperature levels for adjustment 	 A grade black crystal glass 	 Automatically shut off if lack of pot or the pot is empty 	 High/low heating or voltage protection 	 Multiple functions and time setting 	 Electricity consumed can be checked 	 High quality coil, Big PCB with high quality Siemens IGBT 20A  

Double Burners Induction Cooker

SHANGHAI METAL FORMING MACHINE CO LTD

This hydraulic press brake is easy to control and set up, while accurate and high-yielding output is guaranteed. It has a heavy duty steel construction frame designed to absorb heavy shocks whilst working. Professional parts and components originated from America, Germany and Japan promise safe and long-life operation. 	 Material: steel. 	 Vibration treated coil to minimize internal stress. 	 Double cylinder pressure operation. 	 Machinery up-and-down balance structure. 	 Keeps the up-and-down motion paralleled. 	 Machined fixed location escalates working precision. 	 Adjustable height on the two sides of the fixed location. 	 Main electrical parts originated from America, Germany and Japan. 	 Stroke switch from Japanese OMERO company. 	 Connector from German Siemens. 	 Professional components to secure safe operation. 	 High-yielding, easy to control and set up. 	 Certification: CE, ISO901: 2000.  

Hydraulic Press Brake

   New generation heat pump product developed with the most advanced heating technologies.   Utilized the energy from surrounding air and converts it to the hot water for source air conditioning heating-cooling and domestic hot water supply.   Strictly tested with our European partners to make sure the best quality.   Super low working temperature: -15 degree to 43 degree.   Top brand components, such as Daikin compressor, Siemens, Wilo.   For the most reliability &amp; quality.  Striking characters distinguish from other products: 
   High efficiency and energy saving.   Environmental friendly refrigerant R410A.   Emorsion expansion valve to make the accurate regulation.   Pressure protection low temperature production to keep the system safety.   A/C tank inside, easy installation.   House heating, house cooling, domestic hot water functions in one system.  Other characters: 
   Stainless steel plate heat exchanger with maximum pressure 40 bar.   Microprocessor control and error alarm and display.  

Monobloc Air Source Heat Pump

   House heating, house cooling, domestic hot water functions in one system.   New generation heat pump product developed with the most advanced heating technologies.   Utilized the energy from surrounding air and converts it to the hot water for source air conditioning heating-cooling and domestic hot water supply.   Strictly tested with our European partners to make sure the best quality.   Super low working temperature. -15 degree to 43 degree.   Top brand components, such as Daikin compressor, Siemens, Wilo for the most reliability &amp; quality.   Striking characters distinguish from other products:   High efficiency and energy saving.   Environmental friendly refrigerant R410A.   Emersion expansion valve to make the accurate regulation.   Pressure protection low temperature production to keep the system safety.   A/C tank inside, easy installation.  Other characters: 
   Stainless steel plate heat exchanger with maximum pressure 40 bar.   Microprocessor control and error alarm and display.  

Highly productive and reliable, this hydraulic press brake provides simplified controls for ease of use. This steel-made machine boasts a vibration treated coil to reduce internal stress. The up-and-down balance machinery structure keeps the working motion balanced to ensure stable and efficient output. 	 Material: steel. 	 Vibration treated coil to reduce internal stress. 	 Adopts a double cylinder pressure operation. 	 Machinery up-and-down balance structure. 	 Keeps the up-and-down motion balanced. 	 Machined fixed location used to increase working precision. 	 Adjustable height on the two sides of the fixed location. 	 Key electrical parts originated from America, Germany and Japan. 	 Stroke switch from Japanese OMERO company. 	 Connector obtained from German Siemens. 	 Reliable components to ensure safe operation. 	 Certification: CE, ISO901: 2000.  

Shenzhen KD Lighting Co.,Ltd

&nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; ​Parameters:
&nbsp; 	 KD-T8D4-19XRZ​ 	 Input Voltage:AC100V~277V 	 Power Efficiency:92% 	 Power Factor:0.98 	 CRI: Ra&gt;83 	 Working Environment:-40℃~+50℃ 	 LEDs Life Span:&gt;50000H 	 CCT: 3000K,4000K,5000K,5700K,6000K,6500K 	 LEDs Brand: Epistar 	 Material: Aluminum Alloy and PC 	 IP Rating: IP40 	 Compatibility: 100%compatible with Electric and Magnetic BallastMain Feature​ 	 Especially designed for Europe market, compatible with almost 100% EVG/VVG(magnetic) ballast in the Europe&nbsp;market and &gt;95% EVG(electronic) ballast LED light tube 	 Can work directly AC input LED fixture, no need L(live)and N(null) line distinguished 	 a. 1 ballast with 1 fluorescent light and 1 ballast with 2 fluorescent light and 2 ballast with 2 fluorescent light; 	 b. 2 ballast with 4 fluorescent light, respectively 4 starters, each ballast 2 fluorescent light, but it must be used in conjunction with the ballast, can&rsquo;t be used along 	 Commutable PHILIPS, OSRAM,TRIDONIC, HITACHI, TOSHIBA, SCHNEIDER, SIEMENS, GE, PANASONNIC, MISUBISHI, OPPLE, NVC, KEYSTONE, PAK, EASEIC, CHINT, 3AAA, TEKNOWARE &nbsp;ballast in Europe market 	 5 years&rsquo; warranty &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp;  

4ft/19W KD LIGHTING InstantFit Ballast-bypass Plug and Play Europe EVG LED Light Tube LED Röhren

Parameters:&nbsp; 	 KD-T6D4-19XRZ​ 	 Input Voltage:AC100V~277V 	 Power Efficiency:92% 	 Power Factor:0.98 	 CRI: Ra&gt;83 	 Working Environment:-40℃~+50℃ 	 LEDs Life Span:&gt;50000H 	 CCT: 3000K,4000K,5000K,5700K,6000K,6500K 	 LEDs Brand: Epistar 	 Material: Aluminum Alloy and PC 	 IP Rating:IP40 	 Compatibility:100%compatible with Electric and Magnetic BallastMain Features: 	 Especially designed for Europe market, compatible with almost 100% EVG/VVG(magnetic) ballast in the Europe&nbsp;market and &gt;95% EVG(electronic) ballast LED light tube 	 Can work directly AC input LED fixture, no need L(live)and N(null) line distinguished&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;   	 1 ballast with 1 fluorescent light and 1 ballast with 2 fluorescent light and 2 ballast with 2 fluorescent&nbsp;light; 	 2 ballast with 4 fluorescent light ,respectively 4starters each ballast 2 fluorescent light, but it must be used in&nbsp;conjunction with the ballast, can&rsquo;t be used along   	 CommutablePHILIPS, OSRAM, TRIDONIC, HITACHI, TOSHIBA, 3AAA, SCHNEIDER, SIEMENS, GE, PANASONNIC, MISUBISHI, OPPLE, NVC, KEYSTONE, PAK, EASEIC, CHINT, TEKNOWARE&nbsp;&nbsp;ballast in Europe market; 	 5 years &lsquo;warranty.  

Professor Technology Co., Ltd

This is a GPS and GPRS tracking system which has a large capacity of memory. It has a flash memory which can store up to 20,000 vehicle positions. The device also comprises the GPM007 built-up with an internal 16 channels GPS receiver with ATMEL ANTARIS3, and a GSM/GPRS Siemens Quad band of MC35i or MC55/56/TC 63 modem. It has over 450 waypoints to control routes, triggering actions, odometer input, time counter and internal temperature.   With input/output connecting sensors and accelerometer  With hands-free communicating circuits  Able to communicate through both GPS and voice channel SMS or CSD (dial-up)  Active antenna with magnetic base  Power supply: 10 up to 35 VDC  Internal sensor for voltage and temperature verification  Operation temperature: -10 degree Celsius to 70 degree Celsius   Real time communication circuit  Digital odometer  Time counter  512kbytes of flash memory for up to 20,000 positions  Capacity to register up to 450 references points  04 digital inputs and outputs  02 serial connections for configuration, reprogramming needs and communication  Activaates circuit of silent listening  Speakers  6 channel digital video recorder  

GPS & GPRS Tracking System

Xiamen Lizhou Hardware Spring Co.,Ltd

 Displayed is a wire form made of high quality materials for durability. Made from assorted materials, this wire form can be applied to many appliances of your preference. This wire has been supplied to famous brands so your satisfaction is guaranteed. 
 
  Wire forming. 
  Diameter to. 800&quot; diameter. 
  Thick to. 048&quot; flat strip. 
  Materials: wire forms/wire forming are manufactured from a wide variety of materials, including music wire, hard drawn, oil tempered/galvanized wire, stainless steel and phosphor bronze, as well as exotics such as pre-plated materials (gold, silver and&nbsp;tin), inconel, chrome vanadium and many others. 
  Equipment: state of the art CNC wire forming capability as well as conventional spring coiling machines. 
  High quality with competitive price. 
  Strong capability of self-research and self-innovation, can provide one stop service from initial design to through prototype to finished products. 
  Abundant working experience with world-class customers. 
  Strong and efficient international sales' service Certificates: ISO9001, ISO14001, TS16949, SGS and&nbsp;RoHS. 
  Our clients from the&nbsp;service field: automotive, electronics, medical, home appliance, electrical industry, telecommunication and so on. 
  Serving customers: ABB, Schneider, Emerson, Bosch &amp; Siemens, Panasonic,&nbsp;Electrolux, Denso, Braun,&nbsp;Kohler, Toto, Hitachi, Tyco and&nbsp;BYD Auto. 
 

Wire Form

ANECOO Technology Holding Co., Ltd.

 This is a multifunctional solar-powered emergency charger with a fashionable design. It features a built-in rechargeable polymer lithium-ion battery with high capacity. This versatile solar-powered battery charger will offer an easy and convenient way to charge different of your mobile digital devices on the go. 
 
  High solar-energy converting efficiency. 
  Built-in polymer battery: 3,500mAh/3.7V (12.95Wh). 
  Output voltage: 5.5+/-0.2V. 
  Output current: 1,000mA (max). 
  Charge methods: USB port, sunlight or AC adapter. 
  Charge time:: 12-24 hours (by solar charging, according to the sunlight intensity), about 6-8 hours (by computer charge), about 4-5 hours (by wall adapter, 5.3V/1A). 
  Working temperature: -10 degrees Celsius&nbsp;to +55 degrees Celsius. 
  Indicator: LED to display the capacity. 
  Protect function: short circuit, over-current, over-charging, and over-discharging. 
  Cycle life: 600 times. 
  Weight: 138g. 
  Compatible with charging most of the handheld digital devices such as: mobile phones of five popular brands (Nokia, Samsung, Sony Ericsson, Siemens, Motorola), Apple iPod nano, iPod Classic, iPod Touch, Apple iPhone, iPhone 3G, iPhone 3GS, Blackberry, handheld game consoles (PSP, NDS etc), digital camera, MP3/MP4 player, PDA, GPS, Bluetooth headset, etc. 
 

Solar-Powered Emergency Charger

 Displayed is a compression spring made to be of the highest quality possible. Various materials can be used to produce this spring to meet your requirement. This spring has been used by renowned brands so your assurance is guaranteed. 
 
  Compression spring, extension spring and&nbsp;torsion spring of high quality with competitive price. 
  Capabilities of compression/extension/torsion spring: diameter to. 800&quot; diameter. 
  Thick to. 048&quot; flat strip. 
  Material: compression spring, extension spring&nbsp;and&nbsp;torsion spring are manufactured from a wide variety of materials including music wire, hard drawn, oil tempered/galvanized wire, stainless steel and phosphor bronze, as well as exotics such as pre-plated material (gold, silver and&nbsp;tin), inconel, chrome vanadium and many others. 
  Equipment: state of the art CNC wire forming capability as well as conventional springs coiling machines. 
  High quality with competitive price. 
  Strong capability of self-research and self-innovation, can provide one stop service from initial design to through prototype to finished products. 
  Abundant working experience with world-class customers. 
  Strong and efficient international sales' service certificates: ISO9001, ISO14001,TS16949, SGS and RoHS. 
  Our clients from the&nbsp;service field: automotive, electronics,&nbsp;medical,&nbsp;home appliance,&nbsp;electrical industry, telecommunication and so on. 
  Serving customers: ABB, Schneider, Emerson, Bosch &amp; Siemens, Panasonic, Electrolux, Braun, Denso, Kohler, Toto, Hitachi, Tyco and BYD Auto. 
 

My Sourcing

Unfollow this supplier?

Unfollow this supplier?