BST Caltek Industrial Limited

PD20 ExAcoustic Imaging Camera for Partial Discharge on Chemical Industry  Partial Discharge in a chemical industrial environment can cause loss of assets and life  Partial Discharge (PD) is a failure of part of the insulation system to withstand the electrical field. It can result from poor design, workmanship, defective materials, contamination, or ageing. This failure results in a high frequency, unipolar Discharge and accompanying current that flows through or on the surface of the insulation from the conductor to the ground. This current pulse is low energy due to its short (microsecond) duration, but it can negatively affect the insulation and eventually cause catastrophic failure.  Generally, PD happens on equipment including switchgear, transformers, stator windings, power cables and gas/pipelines. For PD to occur, a gas is present between the two conductors, whether air, sulphur hexafluoride (SF6) or hydrogen. In addition, a high voltage between the two conductors must create electric stress.  The discharge spark erodes the insulation from within through its heat and ionisation. If occurring on the surface, the Discharge also causes the breakdown of air molecules into oxygen (ozone) and nitrogen (nitric oxide). The nitric oxide forms nitric acid, which erodes the insulation from the outside.  When an internal PD occurs within the insulation, there is nothing to give this occurrence away, and the absence of any sound, odour or visual clue to an issue before failure is a real challenge. However, the pressure accumulation can cause a significant, disruptive and dangerous explosion.  Partial Discharge in a chemical industrial environment can cause loss of assets and life. Though it usually starts very small, once it begins, the deterioration of the insulation system is progressive. When voltage stress reaches a critical level, Partial Discharge will "bloom" and create a Corona. The ionised gas of a Corona is chemically active. In the air, this generates corrosive gases and causes extreme damage to the magnetic device and related circuit. Eventually, Partial Discharge will cause a system failure. Due to our policy of continual product development, we reserve the right to amend the specifications of all mentioned products without notice. 

Acoustic Imager for Chemical Industry

Taiwan Nickel Precision Technology Co

 This rectangular stator is a wonderful contact sheet used in alarms. It is professionally engineered to guarantee the smooth operation of your timepieces. Assorted designs are available for selection. 
 
  Sturdy construction. 
  Compact size. 
  Used in timepieces for women, men and kids. 
 

Alarm Stator

Tay Guei Industry Co., Ltd.

This is a stator and also a rotor with a durable structure. It is made of high-quality material with excellent workmanship. Made through very strict QC, this item promises quality you can rely on.
 
  Regular type or customized. 
  Long lifespan. 
 

Stator and Rotor

The featured clock movement stator is finely engineered with a high vacuum demagnetization process. The robust construction ensures lasting durability. Different sizes of customization are accepted.   Materials: PB (45%-50% Ni), PC (80% Ni).   Available in different designs.  

Clock Movement Stator

The featured clock movement stator is&nbsp;finely engineered&nbsp;with&nbsp;a high vacuum demagnetization process. The robust construction ensures lasting durability.&nbsp;Different sizes of customization are accepted.
 
  Materials: PB (45%-50% NI), PC (80% NI). 
  Available in different designs.&nbsp; 
 

Xi'an Prime Mechatronics Technology Co Ltd

Specification:
1.stator thickness:22mm
2.rated speed:1300rpm
3.power:220v,50hz
4.the shaft length:37mm
5.the diameter of the shaft:10mm
6.the motor works with 5uf capacitor

Washing Machine Motor

Xi'an Kylin Electric Co Ltd

Suitable for 10-12 meters of pure electric bus, dual-motor stator winding technology, improve coil utilization, improve power density. Under extreme circumstances to deal with a single winding no-load operation, the electric car is running to provide an extra layer of protection.
&nbsp;

100kW AC Induction Motor

Shenzhen Flycker Intelligent Co. Ltd.

Flycker Explorers Series Quadcopter 1100-ARF Aerial photography Drone/multicopter
1.Diagonal Wheelbase:1050mm;Material:Carbon FiberAluminum alloy.
2.Total Weight:4.5kg;Takeoff Weight:6.0kg~10.0kg.
3.Load Weight:0kg~6.0kg;Power Battery:LiPo (6S,10000mAh~15000mAh,15~50C).
4.Max Power Consumption:3800W;Hover Time:Max 15min(@15000mAh &amp; Takeoff Weight 9.5kg).
5.Stator Size:&Oslash;41&times;14mm;ESC&nbsp;Current:40A Flycker-40A.
&nbsp;

 Quadcopter ARF Aerial photography

Explorers Series MH-850-V3 ARF Drone/multicopter RC Drones&nbsp;
1.Diagonal Wheelbase:880mm;Material:Carbon Fiber,Aluminum alloy.
2.Total Weight:3.3kg;Takeoff Weight;5.2kg～8.0kg.
3.Load Weight:0kg～3.5kg;Power Battery:LiPo (6S,10000mAh~15000mAh,15~50C).
4.Max Power Consumption:3000W;Hover Power Consumption:980W(Takeoff Weight 6.8kg).
5.Hover Time:Max 15min(@12000mAh &amp; Takeoff Weight 6.5kg)
6.Stator Size:&Oslash;41&times;14mm;ESC&nbsp;Current:40A Flycker-40A.
7.Propeller&nbsp;Material:Carbon Fiber.

 multicopter RC Drones  ARF

Flycker Scorpio X4-550 Kit RC Drone/multicopter Quadcopter
1.Diagonal Wheelbase:550mm;
2.Material:Carbon FiberAluminum alloy;
3.Total Weight:0.9kg.
4.frame Weight:0.58kg.
5.Takeoff Weight:1.25kg~2.2kg;Load Weight:0kg~1.0kg;
6.Power Battery:LiPo (4S,5200mAh,15C);Max Power Consumption:800W.
7.Hover Power Consumption:350W(Takeoff Weight 1.4kg).
8.Load hover time:Max 17min(@5200mAh &amp; Takeoff Weight 1.8kg)
9.Stator Size:&Oslash;28&times;10mm;
&nbsp;

 Scorpio  Kit multicopter 

 	 Flycker Scorpio X4 RTF Aerial Photography &nbsp;GPS QuadcopterDrone/multicopter 	 Material: carbon fiber, aluminum alloy 	 Diagonal dimensions: 550mm 	 Dimension (L x W x H): 550 x 550 x 145mm 	 Weight: 0.58 kg 	 Takeoff Weight:1.25kg~2.2kg,Load Weight:0kg~1.0kg. 	 Power Battery:LiPo (4S,5200mAh,15C) 	 Max Power Consumption:800W,Hover Power Consumption:350W(Takeoff Weight 1.4kg) 	 Load hover time:Max 17min(@5200mAh &amp; Takeoff Weight 1.8kg). 	 Hover Time:Max 22min(@5200mAh &amp; Takeoff Weight 1.4kg). 	 Motor Stator Size:&Oslash;28&times;10mm. 	 ESC Current:30A Flycker-30A. 	 Propeller&nbsp;Material:Plastic  

Scorpio  RTF Aerial Photography  

Explorers Series RC Hexacopter Drone/multicopter 650-ARF
1.Diagonal Wheelbase:650mm,Material:Carbon FiberAluminum alloy.
2.Total Weight:1.38kg;frame Weight:0.8kg.
3.Takeoff Weight:1.25kg~3.0kg;Load Weight:0kg~1.6kg.
4.Power Battery:LiPo (4S,5200mAh,15C);Max Power Consumption:1200W.
5.Hover Power Consumption:560W(Takeoff Weight 1.4kg);Load hover time:Max 13min(@5200mAh &amp; Takeoff Weight 1.8kg).
6.Hover Time:Max 18min(@5200mAh &amp; Takeoff Weight 2.5kg)
7.Stator Size:&Oslash;28&times;10mm;ESC&nbsp;Current:30A Flycker-30A.

 RC Hexacopter Drones

Shandong Hualv Food Waste Recycle Technology Ltd

 Our submersible motor is driving submersible pump. which is widely used to lift ground water from deep well or other water sources for agricultural irrigation, water supply and drainage of city,industrial and mining enterprises.The material of motor rotor is pure copper,the stator adopts high quality silicon steel sheet and water resistant winding line,the seal adopts high quality mechanical seal , sand protection device adopts sand seal ring and sand leakage hole and the motor casing adopts stainless steel all that ensure durability. 

  Products Features 
● Wide voltage application range.
● No contamination.
● High quality thrust ensure longer duration.
● High efficiency design with economic and energy saving.
● Nice appearance.
● Sand slinger and mechanical seal device well protect the motor.
● Excellent quality assurance.
 Products to order 
● Different voltage,50HZ or 60HZ frequency.
●&nbsp;Apply special launch and operation mode, such as frequency conversion.
●&nbsp;Apply special liquid such as saltwater.
●&nbsp;The leading cable length can accord with customers&rsquo; requirements.
● Installation specification accord with various international standard or user&rsquo; request. 


 &nbsp; 

Submersible Motor

Flycker Scorpio Quadcopter 550-ARF Drone/multicopter
1.Diagonal Wheelbase:550mm;Material:Carbon FiberAluminum alloy;
2.Total Weight:0.9kg;frame Weight:0.58kg.
3.Takeoff Weight:1.25kg~2.2kg;Load Weight:0kg~1.0kg.
4.Power Battery:LiPo (4S,5200mAh,15C).
5.Max Power Consumption:800W;Hover Power Consumption:350W(Takeoff Weight 1.4kg).
6.Load hover time:Max 17min(@5200mAh &amp; Takeoff Weight 1.8kg)
7.Stator Size:&Oslash;28&times;10mm;ESC&nbsp;Current:30A Flycker-30A.
&nbsp;

 Scorpio Quadcopter ARF 

Shenzhen Leder Lighting Technology Co.,Ltd.

 Product features: 
   Easy installation, only need remove the stator, it is fast star.   Lighting sources use SMD LED.   Cree chip or Taiwan Epistar chip are available.   High power factor &gt;85% to ensure the highest energy saving.   Use PC tube and cover to ensure the safety.   CE, RoHS compliance.   It is energy-saving and eco-friendly.   Color temperature can be adjusted from 2500K to 8000K.   Luminous flux: 1700 to 1800lm.   Applications: 
   Schools, universities, hospitals, hotels.   Conferences, meeting rooms, show rooms, showcases.   Commercial complexes.   Factories, plants, warehouses, offices.   Super-markets, department stores.   Technical data: 
   Length: 150cm.   Voltage: 110, 240V AC.   LED quantity: 255 pieces.   Power: 22W.   Material: aluminum alloy + PC (transparent or milky white).   Colors: any colors are available (red, blue, orange, green, yellow and more).   Light source: SMD3014.   IP rate: IP40.   Lifespan: &gt;50,000 hours.   Working temperature: -30 to 50 degrees Celsius.  

LED Daylight Tube

Explorers Series RC Drone/multicopter Quadcopter 550-ARF&nbsp;
1.Diagonal Wheelbase:580mm;Material:Carbon FiberAluminum alloy.
2.Total Weight:1.1kg;frame Weight:0.65kg.
3.Takeoff Weight:1.23kg~2.3kg;Load Weight:0kg~1.0kg.
4.Power Battery:LiPo (4S,5200mAh,15C),Max Power Consumption.
5.Hover Power Consumption:350W(Takeoff Weight 1.6kg)
6.Load hover time:Max 13min(@5200mAh &amp; Takeoff Weight 2.0kg)
7.Hover Time:Max 18min(@5200mAh &amp; Takeoff Weight 1.65kg).
8.Stator Size:&Oslash;28&times;10mm;ESC&nbsp;Current:30A Flycker-30A.

multicopter Quadcopter ARF 

 Product features: 
   Easy installation, only need remove the stator, it is fast star.   Lighting sources use SMD LED.   Cree chip or Taiwan Epistar chip are available.   High power factor &gt;85% to ensure the highest energy saving.   Use PC tube and cover to ensure the safety.   CE, RoHS compliance.   It is energy-saving and eco-friendly.   Color temperature can be adjusted from 2500K to 8000K.   Luminous flux: 1700 to 1800lm.   Applications: 
   Schools, universities, hospitals, hotels.   Conferences, meeting rooms, show rooms, showcases.   Commercial complexes.   Factories, plants, warehouses, offices.   Super-markets, department stores.   Technical data: 
   Length: 180cm.   Voltage: 110, 240V AC.   LED quantity: 315 pieces.   Power: 28W.   Material: aluminum alloy + PC (transparent or milky white).   Colors: any colors are available (red, blue, orange, green, yellow and more).   Light source: SMD3014.   IP rate: IP40.   Lifespan: &gt;50,000 hours.   Working temperature: -30 to 50 degrees Celsius.  

LED Tube Light

INTECH C&I

This induction motor on-line diagnosis system is developed to identifying various electrical and mechanical defects in low-voltage motors using current and vibration signals. A diagnosis algorithm is applied in the system to increase the accuracy of diagnosis. The system can minimize the effect of unexpected failures related with motor itself as well as motor related equipment and processes in industry.&nbsp;   On-line diagnosis system for identifying electrical and mechanical defects.   Monitoring current, vibration, partial discharge, and temperature simultaneously.   Identifying stator winding, rotor eccentricity, broken bar, bearing defects.   CT signal input: 3 channel vibration input,&nbsp;1 channel 100kS/s.   Real-time sampling: 1 Hz-40kHz.   Hardware filter data measurement time: 10.486 sec.   Time&nbsp;and frequency graph display motor parameter setting.   Motor fault diagnosis character LCD display SRAM 2 Mbytes RS-422 or Ethernet (TCP/IP).   Measurement system display type: 2&nbsp;x 10 character.   LCD key: 6 key.   Input sensor input: CT 3Ch/vibration 1Ch.   Flash memory: 4 Mbytes, sampling rate: 100kS/s, band pass filter: 1-40kHz.   Resolution: 16 bits.   Communication: RS-422 or Ethernet (TCP/IP).&nbsp;   Current sensor type: CT type.   Primary range: 50A, 100A, 200A, 250 A, 300A (rms).   Secondary range: 5A (rms).   Accuracy class: 1%.&nbsp;   Vibration sensor sensitivity (&plusmn;15%): 100mV/g.   Frequency response: 1-10kHz.   Dynamic range: &plusmn;50g peak.  

My Sourcing

Unfollow the following supplier?

Unfollow the following supplier?