Peace Target Ltd

 Booster Cable with Nylon Pouch includes the following features :     600AMP   1pc of Positive wire (Red)   1pc of Negative wire (Black)   Multi strand copper cables with PVC insulation   Spring loaded fully insulated color coded clamps   Packaging in Nylon Pouch   Material :    Cable: Copper packed by PVC   Pliers: Copper   Size closed :    11.8 feet  

Booster Cable

2-in-1 Car Jump Starter &amp; Air Inflator includes the following features : Capacity of 37Wh (10,000 mAh/3.7V)LCD displayCharging specifications: DC5V/2A, 9V/2A (type-c)Charging time: 3-6 hoursUSB output: 5V/2A MaxStarter current: 600APeak current: 800AAuto 12V emergency starterPowerful USB power bankBuilt-in LED flashlight2 x Intelligent clampsSupports 12V system vehiclesGreat for engine with 5.0L gasoline vehicles &amp; 3.5L diesel vehiclesIntelligent relay wire clamp protection function: Working voltage detection, provides 4 types of protection - reverse charging, short circuit, reverse connection and temperature protectionAir pump: T-type 19-cylinder movementMaximum air pressure: 120psi±5psiRS390-17500 rpmMicro cable and type C cable includedAccessories: 1 x air pump power supply, 1 x charging cable, 1 x 4-piece adapter, 1 x starter battery clamp, 1 x manualMaterial : ABS plastic bodySize closed : Length of 8.96 cm x Width of 4.36 cm x Height of 22.1 cmWeight of 0.77 kgs

2-in-1 Car Jump Starter & Air Inflator

New Greathouse Electronics Industry Limited

The product is hard wired and powered by your vehicle’s battery. It is convenient, effective and environmentally friendly. You will have no worry of rodent problem from now on. This item will drive marten,rodents away from your car and garage. It emits ultrasonic waves that make the marten feel uncomfortable and run away.This device is supplied with mounting and wiring hardware to connect to the car’s battery. There are two cables. The red cable should be clamped to the positive electrode and the black cable be clamped to the cathode. The unit automatically switch off while the car is running and then automatically switch on emit ultrasonic wave once the car off.Due to containing vibration controller that monitor this. This item has low power consumption. The sounds are hardly perceptible to the human ear and keep the marten rodents away from the vehicle and rooms. It protects cables, wires and other rubber parts from rodent damage. Technical data: Power supply:Car storage battery Working current:28mAh,in standby 20μAh Frequency:12-45KHZ Display:LED indication Advantage:No chemical,easy to use and install  

Car-mounted pest repellent

IP66 Waterproof Car Battery Jump Starter with Wireless Charging includes the following features : Built-in LED flashlightIP66 waterproofPowerful USB power bank with capacity of 13,000 mAhType-c input: 5V/2AUSB output: 5V/3A, 9V/2A, 12V/1.5AWireless charger: 5V/2A, 10W max.Comes with 2 built-in pole clamps: 500A (current), 1,500A (peak)Auto 12V emergency starter2 x Intelligent clampsThe LCD screen shows the remaining power and operating status of the boot starterSuitable for engine with 7.0L gasoline vehicles and 5.0L diesel vehiclesType-c charging cable includedMaterial : ABS and PC housingSize closed : Length of 9.2 cm x Width of 3.6 cm x Height of 18 cm

IP66 Waterproof Car Battery Jump Starter w/ Wireless Charging

MGM Industries & Company

(WIRELESS CHARGING, ELECTROMAGNETIC CHARGING): Support wireless charging function for cell phones directly on the wireless car charger stand. Note that this wireless charger-only supports cell phones with magnetic wireless charging function. If there is no wireless charging function, please use the data cable for charging.(SMART FAST CHARGING MAKES DRIVING EASIER AND SAFER)：When your phone is put on it, it will be automatically clamped, and after finishing charging, the wireless car charger will automatically turn off to protect your phone battery.(SMART-TOUCH BUTTONS ON BOTH SIDES)：Touches it with your hand to turn it on or off. Thoughtful indicator light to indicate the charging status, the device is powered on, the standby status shows red light, the phone charging status, the indicator light shows blue light.(ADJUSTABLE-BOTTOM BRACKET)：Bottom bracket and left and right clip arm have non-slip silicone pads, left and right clip arm non-slip silicone pads leave the phone button position, will not press the phone button. Silicone pattern design is also very good, regardless of the size of the phone is able to card very tight.(IDEAL VIEWING ANGLE)：360° rotating and turning ball joint can be adjusted to any viewing angle to meet your all-round visual needs.

Car air outlet navigation mobile phone 15W fast charging bracket Fully automatic induction opening and closing car wireless charging bracket

Shenzhen Oceantech Electronics Co Ltd

Clamping 15W Wireless Car Charger ● Input: 9V/3A ● Output: 15W(MAX) ● Cable length: 1m/2A ● Product interfaces: Type-C ● Product weight: 75.3g ● Product size: 51*59*10.2mm ● 15W for Cellphone      

Clamping 15W Wireless Car Charger

Meet (China) Ltd

Cable and Pipe Trace - Single pole transmitting signal through any matallic object, Easy; Safe and Quick to operate!MS-CPTK1AComplete Tracer Kit Set: Transmitter &amp; Receiver with Accesories : Croc Clip, 13A Socket Adaptor, E27 ES Light Fitting Test Adaptor, all packed in Durable &amp; Portable Carrying bag.Advance Features:-Transmitter - MS-78CPT3A-Single pole transmitt the signal-Operated with 9V battery-8 level transmit signal selection-Works on energized or de energized circuit up to 600V AC/DC-Transmit signal greater than 1Km-Transmit signal through any metallic conductor-Croc clip can be clamped on the sheath of the wire or cable transmit signalReceiver - MS-78CPR3-Operated with 9V battery-Auto sensitivity adjust or manually 'REL' adjust-Non-contact AC voltage detection &gt; 100V AC-With white LED torch / flash light-Audible with 7 level signal strength indication-270° rotation with six angle selectable sensing armCroc Clip - MS-LAC-Quick check with wire / cable / metal pipe13A Socket Adaptor - MS-CP (9A)-Quick check with 13A socketE27 ES Light Fitting Test Adaptor - MS-TLAES-Quick check with light fittingTrace:-Cable / Multi-core cable-Wire / Telephone cable-Coaxial cable-Shielded network cable-Armoured cable-Buried wire / cable-Underground water pipe-underground cable-Wires inside PVC / metal conduit / duct / pipe-Metallic air / oil / water pipe-Heating pipe-Buried gas pipe-Ground / Earthing connectionNote: Detectable 2 feet away depending on distance!  

Cable and Pipe Trace

ZHANGZHOU TIANLILONG ELECTRONIC TECHNOLOGY CO., LTD

Get quick and accurate current measurements with this precise and trusty-worthy digital clamp meter. This digital clamp meter effectively and accurately measures the flow of current in a range of conductors without direct contact. Matched to its user-friendly clamp design is a big knob and a clear analog interface to guarantee easy operation and an ultra-accurate read. Simply clamp the jaws around the wire, cable, or conductor in the electrical system for an accurate reading. Jaw opening: 20 mm.AC voltage: 300 / 600V.AC current: 3/12/60/300a.Resistance: 2k/200 kω.Temperature: -20 – 150 c.Operating temperature: 0-40 ℃.Dimensions: 148 x 66 x 36 mm.Weight: approx. 160 g (battery included).

Analog Clamp Multimeter

Dongguan Langming Intelligent Technology Co., Ltd

1) Compatible with PC Windows, Xbox 360/ Xbox One/ Xbox Series X S / PS5/PS4/ PS3/ PC/ Xinput/ Switch/ Android systems 2) 180°-1080° switch freely 3) High-Quality Shifter: 6+1 shifter, high/low Shifting switch 4) 3-In-1 Pedal with Hall Magnetic Induction 5) Double motor vibration for realistic feedback 6) Built-in Hall left and right paddle for precise control 7)LED lights on the steering wheel for an immersive experience Supported platforms: PC/PS5/PS4/PS3/ Xbox-Series X S /Xbox-One/Switch /Xbox 360 /Android TV Box Connection type: wired Interface: USB 2.0 Sensor type: Resistive Rotation angle: 180 to 1080 degrees 2 Vibration motor feedback Steering wheel diameter:25cm D-Pad: 4-way Adjustable sensitivity The type of fastening to the tabletop: 2 clamps The quantity of buttons: 28 Cable length: 1.8M Power supply: Wired USB Connection 

1080° Racing Wheel  Racing Simulator Bundle: PC Gaming Steering Wheel Pedal Set with  Springs & Gear Shift

1) Support P S 5 P S 4 /P S 3 /PC / XBOX Series X S / XBOX 360 / XBOX ONE / NS SWITCH / ANDROID 2) 900 degree Rotation 3) Auto-Gear + Pedal 4) With paddle shifte  Supported platforms: PC/P S 5/P S 4/P S 3/ Xbox-Series X S /Xbox-One/P 3/Switch /Xbox 360 /Android TV box Connection type:wired Interface: USB 2.0 Rotation angle: 180 to 900 degrees 2 Vibration motors feedback Steering wheel diameter : 26cm D-Pad: 4-way Adjustable sensitivity The type of fastening to the tabletop: 2 clamps +suction cup The quantity of buttons: 18 Cable length: 1.8 M Power supply: Wired USB Connection 

8-In-1 900° Racing Wheel  Racing Wheel,P S 5 Steering Wheel Plug and Play Gaming Driving  900° Steering racing wheel with Pedals Shift Bundle,Hall effect sensing,free switching,High grade leather comfortable and delicate  

Zhongshan Bestwon Lighting Co., LTD

R3 String light Advantage: 1.Hanging wire hole : High toughness clamping jaws, designed with a wide range of clamping cables.effective tensile strength, strong waterproof and dustproof 2. Waterproof joint: Highly sealed waterproof ioints to ensure waterproof and safe cable wiringSPECIFICATIONS  

R3 String light

R4 String light Advantage: 1.Hanging wire hole : High toughness clamping jaws, designed with a wide range of clamping cables.effective tensile strength, strong waterproof and dustproof 2. Waterproof joint: Highly sealed waterproof ioints to ensure waterproof and safe cable wiringSPECIFICATIONS 

R4 String light

Donegoods Industrial Co., Ltd

Product OverviewTired of messy wires under your desk? Our Clamp-on Under Desk Cable Management Tray provides a perfect solution for organizing power strips, adapters, and various cables without damaging your furniture. Ideal for office and home use.Key FeaturesNo Drilling Required: Easy clamp-on design allows for installation in minutes without any tools or holes in your desk. Sturdy Construction: Made of heavy-duty steel with a powder-coated finish for durability and rust resistance. Universal Fit: Adjustable clamps fit most desk thicknesses (from 1cm to 5cm). Excellent Ventilation:The open-wire mesh design prevents heat buildup and keeps your devices cool. Spacious Storage:Large enough to hold oversized power adapters and bulky power strips.      

No-Drill Under Desk Cable Management Tray

R1 String light 1.Hanging wire hole : High toughness clamping jaws, designed with a wide range of clamping cables.effective tensile strength, strong waterproof and dustproof 2. Waterproof joint: Highly sealed waterproof ioints to ensure waterproof and safe cable wiring3. PC housing ： PC mikly cover TPE Soft rubber shield :Better shatter-resistant,designed with soft rubberto wraplampshade.SPECIFICATIONS

R1 String light

R2 String light Advantage: 1.Hanging wire hole : High toughness clamping jaws, designed with a wide range of clamping cables.effective tensile strength, strong waterproof and dustproof 2. Waterproof joint: Highly sealed waterproof ioints to ensure waterproof and safe cable wiring3. PC housing ： PC mikly cover TPE Soft rubber shield :Better shatter-resistant,designed with soft rubberto wraplampshade.SPECIFICATIONS   

R2 String light

Shanghai Linsky Electrical Co., Ltd.

4" Round New Work BMC Ceiling Boxes (FG05N)Product OverviewOur 4" Round New Work BMC Ceiling Boxes are designed for residential and light commercial new construction applications, providing a secure, fire-rated enclosure for electrical wiring and fixture mounting. Made from high-strength BMC (Bulk Molding Compound) polyester material, these boxes offer exceptional durability and reliability, supporting fixtures up to 50 lbs.Key SpecificationsCubic Capacity: 22.5 cu inSize: 4" Diameter × 2-7/16" DepthFire Rating: 2 Hour Fire Rating (ETL/cETLus certified, Intertek 5010519 2-HR-W-C)Max Fixture Load: 50 lbsMaterial: High-Strength BMC PolyesterModel DetailsFG05N (FGBR22)Equipped with captive nails and speed clamps for quick installationDesigned to be fastened directly to studs or joistsOuter Box Size: 54.5×33×32.5 cmProduct AdvantagesEasy Installation: Captive nails, adjustable bar hangers, and speed clamps reduce installation time and labor costsSuperior Strength: High-strength BMC material ensures long-term durability and supports heavy fixturesSecure Wire Management: Built-in speed clamps hold wires firmly in place, preventing damage and ensuring safetyFire Safety: 2-hour fire rating complies with strict building codes for residential and commercial useVersatile Mounting: Options for direct stud attachment or adjustable bar hanger for flexible positioningApplication ScenariosResidential Use: Perfect for new home construction, ceiling fan installations, recessed lighting, and pendant light fixturesLight Commercial Use: Suitable for office spaces, retail environments, and other non-metallic fast work applicationsNew Construction: Designed specifically for "new work" installations before drywall is applied, ensuring flush alignment with finished wallsInstallation GuideSafety First: Turn off the power supply before starting any installation workPosition Box: Align the front edge of the box to be flush with the finished wall (typically 1/2-inch thick drywall)Secure Mounting:For FG05N:Drive captive nails into the stud or joistThread Cables: Feed electrical cables through the wire entry fixtures into the boxSecure Wires: Use speed clamps to hold cables firmly and organize wiring inside the box

USLINSKY  Ceiling Boxes

4" Round New Work BMC Ceiling Boxes ( FG06N)Product OverviewOur 4" Round New Work BMC Ceiling Boxes are designed for residential and light commercial new construction applications, providing a secure, fire-rated enclosure for electrical wiring and fixture mounting. Made from high-strength BMC (Bulk Molding Compound) polyester material, these boxes offer exceptional durability and reliability, supporting fixtures up to 50 lbs.Key SpecificationsCubic Capacity: 22.5 cu inSize: 4" Diameter × 2-7/16" DepthFire Rating: 2 Hour Fire Rating (ETL/cETLus certified, Intertek 5010519 2-HR-W-C)Max Fixture Load: 50 lbsMaterial: High-Strength BMC PolyesterModel DetailsFG06N (FGBR22-G-BHA)Features 16"-24" adjustable bar hanger and ground strapIdeal for spanning between joists without direct stud attachmentSpeed clamps included to secure wires firmlyOuter Box Size: 41.5×39×40 cm, 50 pcs per cartonProduct AdvantagesEasy Installation: Captive nails, adjustable bar hangers, and speed clamps reduce installation time and labor costsSuperior Strength: High-strength BMC material ensures long-term durability and supports heavy fixturesSecure Wire Management: Built-in speed clamps hold wires firmly in place, preventing damage and ensuring safetyFire Safety: 2-hour fire rating complies with strict building codes for residential and commercial useVersatile Mounting: Options for direct stud attachment or adjustable bar hanger for flexible positioningApplication ScenariosResidential Use: Perfect for new home construction, ceiling fan installations, recessed lighting, and pendant light fixturesLight Commercial Use: Suitable for office spaces, retail environments, and other non-metallic fast work applicationsNew Construction: Designed specifically for "new work" installations before drywall is applied, ensuring flush alignment with finished wallsInstallation GuideSafety First: Turn off the power supply before starting any installation workPosition Box: Align the front edge of the box to be flush with the finished wall (typically 1/2-inch thick drywall)Secure Mounting:For FG06N: Extend the adjustable bar hanger to span between joists and secure in placeThread Cables: Feed electrical cables through the wire entry fixtures into the boxSecure Wires: Use speed clamps to hold cables firmly and organize wiring inside the box

USLINSKY Ceiling Support Boxes 

Ledlucky Holdings Co Ltd

Our Sirius Flood Light is suitable for building exterior lighting, small and medium-sized parking lots, billboards, small and medium sports fields. With die-casting crafts, Three sizes for option, we can provide best solutions for the customer according to the different configuration. Currently we have 3 kinds of efficiency for choosing, it&rsquo;s 125lm/W, 120lm/W, 115lm/W. we can provide best solution for customer according to the actual needs. Connected by a rotating shaft, the driver box can be opened by simply unscrewing two screws. It&rsquo;s connected by terminal blocks, which is convenient for wiring and maintenance. The driver box reserves outlet for wire grip, we can make multiple lamps cascades without additional junction box. Besides conventional U-bracket mounting method, we also have bar and right-angle wall mounting accessories for option. We designed four light distribution ( 60degree, 110degree and 80x125deg, polarized 45deg) for choosing so that our Sirius series can meet the lighting demands in a variety of occasions. 	 Power watts: 100W, 150W, 200W, 250W, 300W 	 High light efficiency: 125lm/W, 120lm/W, 115lm/W 	 Beam angle: Symmetric 60degree, 100degree &amp; Asymmetric 80degree*125degree, polarized 45degree 	 User friendly driver compartment 	 Two reserved cable outlets are available for loop in/out connection, DALI dimming and 1-10V dimming 	 Robust bracket with tick marks 	 Complementary mounting accessories: clamp kit for pole installation and bracket for installation at the corner of wall 	 Certificates: CE, RoHS  

Sirius LED Flood Light

Kinglumi Co Ltd

LEDGEAR® C10 is part of the Kinglumi 3in1 compact LED drivers family with DALI-2, Push-DIM and 1-10V dimming. Beside C10(1W-20W), there’re also C11(20W-40W) and C12(40W-60W)suitable for indoor lighting. Available in both built-in and independent(with cable clamp) installations, they are especially suitable for small cut out hole downlights no less than 54mm diameter, or any other limited ceiling space installations. The drivers equipped with push-fitterminals, which enables easy installation, and the DIP switches located on side allows easy output current setting without opening the driver housing. 2 SKU of LEDGEAR® C10 with variable output voltage of 6-52V with 120-1050mA constant current output, fully perfect for all the LED modules with SELV input with 16 levels of current optional. These wide operating windows and easy wiring for LED modules makes it super flexibility and warehouse inventory reduction. These C10 drivers has continuous dimming down to 0.1% of full output current, and fade smoothly between 100% and 0.1%.  Features •   DALI-2, Push-DIM and 1-10V 3in1 dimming •   DALI approved and IEC 62386Part 101,102, 207 qualified •   Built-in or independent(with extra cable clamp) 2in1 application •   16 output current levels with wide range output voltage •   Continuous dimming down to 0.1% and fade smoothly between 100% and 0.1% •   Pst LM &lt;0.8; SVM &lt;0.3 much better than EU 2019/2020 requirement) •   Flicker free: flicker percentage &lt;3%(IEEE1789) •   ENHANCED amplitude dimming technology •   Suitable for Min. cut-out hole diameter 54mm for recessed downlights •   Constant light output(CLO) on request(factory set) •   Built-in with permanent memory for DALI and Push-DIM •   Reliable, Class II, SELV according EN 61347 •   Protection for output open load, short circuits, over voltage and over temperature •   Over 50,000 hrs lifespan, Five-year factory guarantee Benefits •   Full flexibility &amp; Optimized Inventorythanks to •   Twomodel covers wattages from1W to20W •   3in1 dimming, 2in1 application and 16in1 current levels •   Connection Interfaces •   DALI DT6, Push-DIM, 1-10Vdimming •   Strain relief with cable clamp •   Terminal blocks: push-fit terminals  Typical applications Fordownlight and spot light in both residential, commercial and decorative lighting application   

Ultra Compact DALI-2 one4all 20W Driver: 120-1050mA, 6-52V output, 0.1% dimming

﻿LEDGEAR® C6, a group fo DALI-2 &amp; Push-DIM independent ECGs covering 3.7W - 57W, design with through wiring and super large wiring space, saving a lot of time and effort on the actual wiring work on site. Big push-fit looping connectors are quick to connect cables with, supporting also various wire thicknesses. Wires are secured to the driver with click-on cable clamps, and strain relief cover clicks on effortlessly securing the connections without any need for screws. The output current can be programmed by DALI or selected by DIP switches which allows you to adjust the constant output current to work with different power LED modules. It helps to reduce the inventory and faster to projects. These LED drivers provide Amplitude Modulation(AM, or CCR) current output, this LEDGEAR® C6 LED drivers is ideal for independent use with Class I, II and III luminaires, you can be sure to offer your customers high quality of light without visual flicker and stroboscopic effects to work in TV studios and security camera environments. Application For panel light, troffer and area light in office and education applicationFor spot light and downlight in retail and hospitality applicationsFeatures Design DALI-2, Push-DIM, output 2in1 dimmingFlicker free, Pst LM&lt;0.1%， SVM&lt;0.1%DALI member, compatible with universal DALI application controllers(also called masters, DALI USB)IEC 62386 Part 101,102(DALI-2), 207 qualified and tested in DALI houseReliable, Class II, SELV according EN 61347ENEC, CE, CB approved by TUV SUD, SAA, Ctick qualified±5% output current accuracy(under maximum load)Permissible AC cable 0.75-2.5mm² wire gauge, 8~10mm PVC jacket diameterProtection for output open load, short circuits, over voltage and over temperatureBuilt--in with permanent memory for DALI and Push-DIM, 100,000 times memory85°C Maximum case operation temperature(tc-point ¹)Operating temperature ¹: -25°C ~ +50°C, the humidity: 20% ~ 85%Over 60,000 hrs nominal lifespan at tc=70°CFive-year factory guarantee and lifetime technical supportBenefits Flexibility &amp; Optimized Inventory Wattage selectable by 4xDIP switches, or by DALI programmed.Wattage selectable by 4xDIP switches.Push-fit secondary terminals for LED module wiresHuman Centric Design Easy &amp; Quick connection with push-fit terminals and clip-on end cap for strain relief, super large wiring spaceLoop in &amp; loop out function, max.2.5mm2 cross section L,L,X,X,N, N,DA,DA,DA,DA stranded wire or solid wireSuitable for Emergency Lighting Suitable for Central Emergency System, CBS (central battery system)50/60Hz and 0Hz(for emergency system)Suitable for emergency escape lighting systems according to EN 50172, LEDGEAR® can work with emergency DC voltage input, such as work with backup or emergency LED drivers(batteries).

3.7 to 57W DALI-2 Dimmable LED Drivers with Through Wiring

Product IntroductionOur USLINSKY Aluminum Lay-in Lug is UL486B LISTED and CSA certified dual-rated wire connector, specially designed for safe connection of both copper and aluminum conductors. Produced by professional electrical fitting manufacturer Shanghai Linsky Electrical, it fully meets North American low-voltage electrical safety standards.Material AdvantagesMade of premium 6061-T6 high-strength aluminum alloy with electro-tin plated surface, the terminal features high electrical conductivity, low contact resistance, excellent anti-corrosion, rust-proof performance and durable structural strength. It can adapt to various harsh outdoor working environments with long service life.Convenient Installation FeatureWith unique open-faced lay-in design, this cable lug supports quick and easy wiring operation. No special tools or complicated wire processing is needed. Loosen the screw, insert the cable and tighten to finish secure locking. The connector is reusable for repeated disassembly and installation.Electrical SpecificationsRated voltage: 600VMaximum heat resistance: 90℃ (194℉)Available models: LTAS-4, LTAS-1/0, LTAS-3/0, LTAS-250, covering multiple AWG wire gauge ranges.Application FieldsIt is widely applied in above ground pool bonding grounding, solar photovoltaic system wiring, residential and commercial building power distribution, electrical equipment grounding, and various low-voltage circuit connection projects.Wholesale &amp; Custom ServiceAll standard models are in stock with fast delivery. Customization on size, surface treatment and package is acceptable for bulk orders. Full certification and technical documents are provided for export business.

USLINSKY Aluminum Lay-in Lug

Beghelli Asia Pacific Limited

Displayed is an LED floodlight that can operate in all angles. With special overheating protection, this floodlight is safe to use for long hours. The aluminum reflector&nbsp;helps maximize the illuminated area, making this LED floodlight an ideal choice for outdoor lighting. 	 The square design of this fixture allows the bracket to operate in 360&deg;. 	 Keeping the ballast in the lower part of the fixture to prevent overheating the electronics. 	 No restrictions with regards to installation positions. 	 The fixture can be aimed in any direction thanks to a goniometric device with a graduated ring for restoring the position. 	 The casing is made from die-cast aluminum and is equipped with particularly effective cooling fins. 	 The reflector is made from aluminum with a complex parabola to maximize the illumination of the desired area. 	 The fixture is equipped with a 3-pole screw clamp, ballasts with thermal protection and an adjustable lamp holder with 2 positions for a diffuse or concentrating light beam according to requirements. 	 The product&#39;s footprint is very small, providing clear advantages during transport and storage. 	 Installation and maintenance are facilitated by the tilting glass cover closed by two stainless steel clips. 	 The wiring is connected from the rear compartment without opening the lamp, ensuring a perfect IP seal. 	 The separate sealing chamber eliminates any pressure imbalance between the inside and outside of the fixture, preventing any connection cable take-up. 	 As&nbsp;high bay light and low bay light. 	 Please contact supplier for up to date price information.  

LED Floodlight

This is an LED floodlight with a neat and clean look. It adopts high-power LEDs as the light source for superior lighting efficiency and low energy consumption. This LED floodlight is widely used in assorted commercial lighting applications. 	 The square design of this fixture allows the bracket to operate through 360&deg;, keeping the ballast in the lower part of the fixture to prevent overheating the electronics. 	 There are therefore no restrictions with regards to installation positions. 	 The fixture can be aimed in any direction thanks to a goniometric device with a graduated ring for restoring the position. 	 The casing is made of die-cast aluminum and is equipped with particularly effective cooling fins. 	 The reflector is made of aluminum with a complex parabola to maximize the illumination of the desired area. 	 The fixture is equipped with a 3-pole screw clamp, ballasts with thermal protection and an adjustable lamp holder with 2 positions for a diffuse or concentrating light beam according to requirements. 	 The product&#39;s footprint is very small, providing clear advantages during transport and storage. 	 Installation and maintenance are facilitated by the tilting glass cover closed by two stainless steel clips. 	 The wiring is connected from the rear compartment without opening the lamp, ensuring a perfect IP seal. 	 The separate sealing chamber eliminates any pressure imbalance between the inside and outside of the fixture, preventing any connection cable take up. 	 Please contact supplier for up to date price information.  

My Sourcing

Unfollow this supplier?

Unfollow this supplier?