Professional Services

service

Find Professional Services from the best B2B online marketplace. Find a reliable Professional Services supplier, vendor or service provider to get free quote on HKTDC Sourcing.

Professional Services Service Providers and Companies

The Hong Kong Standards And Testing Centre Ltd (STC)

Characterization for materials used in medical devices – an analysis of a material’s composition, purity, uniformity, sterilant residuals and extractables – is an essential step to verify their suitability for human body contact, thus should not be missed out throughout the product life cycle.  Following the enforcement ofRoHS2 in the European Union, which restricts the use of specified hazardous substances in electrical and electronic equipment, and medical devices are now added to the scope of the Directive and have to be verified asRoHS-compliant.  The chemical laboratory at STC is equipped with the most advanced testing equipment; our team of experts can perform material characterization and RoHS analysis with a wide range of testing methods. We can help manufacturers identify the appropriate testing program based on the intended use of a device and material, and its expected nature of contact with the human body. Material Characterization - Guidelines &amp; Standards U.S. FDA Blue Book Memorandum GP#95-1ISO 10993-1, “Biological Evaluation of Medical Devices”ISO 10993-18, “Chemical Characterization of Materials”FDA Guidance Document, “Container Closure Systems for Packaging Human Drugs and Biologics” Material Characterization Testing Capabilities Physiochemical TestFourier Transform Infrared Spectroscopy (FTIR)High-Performance Liquid Chromatography/mass Spectrometry (HPLC-MS)Gas Chromatography / Flame Ionization Detector (GC / FID)Gas Chromatography / Mass Spectrometry (GC / MS)Inductively Coupled Plasma Spectrometry (ICP)Specific GravityGel-Permeation Chromatography (GPC)ViscosityDifferential Scanning Calorimetry (DSC)If you have any further question, please feel free contact us or visit our website: https://www.stc.group/en/contact 

Chemical Testing for Medical Devices

Founded in 1963, Hong Kong Standards and Testing Centre (STC) provides a wide range of professional testing services for proprietary Chinese medicine, Chinese Materia Medica, pharmaceutical products, food, microbiological quality and cosmetics, environmental testing as well as "STC tested" Mark Certification. 

Chinese Medicine & Chinese Raw Herb testing

STC's Biocompatibility Testing services for medical devices includes:	Absorbent Incontinence Products  	Adhesives     	Blood Collection &amp; Storage Devices  	Bone Void Fillers  	Central Nervous System Implants	Combination Products 	Contact Lenses   	Dental Implants  	Devices Containing Antimicrobials	Device Raw Materials	Hemodialysis Disposables	Implantable Drug Delivery Devices  	Infusion / transfusion Devices	Intraocular Lenses	Laparoscopes &amp; Endoscopes  	Ocular Implants	Orthodontic Devices	Orthopedic Implants	Ostomy Devices	Reusable Devices	Surgical Gloves	Sutures	Syringes	Urinary Stents	Urologic Catheters	Vascular Catheters	Vascular Grafts	Vascular Stents	Ventricular Assist Devices	Wound Drainage Devices	Wound DressingsCytotoxicity Study Test (3 weeks lead time)	MTT Method(ISO 10993-5)	Agarose Overlay Method(ISO 10993-5 / USP 87)	Filter Diffusion Method(ISO 10993-5)	Direct Contact Method(ISO 10993-5 / USP 87)	MEM Method(USP 87)Irritation &amp; Skin Sensitization Test	Skim Sensitization Study (GPMT / Closed-patch)(ISO 10993-10) (6 - 8 weeks)	Skin Irritation Test(ISO 10993-10) (3 weeks)	Intracutaneous (Intradermal) Reactivity Test(ISO 10993-10 / USP 88)(3 weeks)	Oral Mucosa Irritation Test(ISO 10993-10) (8 - 10 weeks)	Vaginal Irritation Test(ISO 10993-10) (8 - 10 weeks)	Penile Irritation Test(ISO 10993-10) (8 - 10 weeks)	Rectal Irritation Test(ISO 10993-10) (3 months)	Ocular Irritation Test(ISO 10993-10) (3 - 4 weeks)Systemic Toxicity Test	Acute Systemic Toxicity Test(ISO 10993-11 / USP 88) (3 weeks)	Subacute Systemic Toxicity Test (14 days / 28 days)(ISO 10993-11) (6 or 8 weeks)	Subchronic Systemic Toxicity Test (90 days / 180 days)(ISO 10993-11) (5 or 8 months)	Pyrogen Test(ISO 10993-11) (3 weeks)Local Effects after Implantation Test(ISO 10993-6) (at least 4 weeks)	Implantation in Subcutaneous Tissue Test	Implantation in Muscle Test	Implantation in Bone TestInteractions with Blood Test (2 weeks)	Hemolysis Test(ISO 10993-4 / GB)	Hemolysis Test(ASTM F756)	APTT、PT、TT、FIB(ISO 10993-4 / GB)	Platelet Count Test	Complement Test(ISO 10993-4 / GB)	Thrombosis Test(in Vivo / in Vitro)(ISO 10993-4 / GB)Genotoxicity Test (ISO 10993-3)	Ames Test(8 weeks)	Mouse Lymphoma Assay Test(10 weeks)	Chromosome Aberration Test (10 weeks)If you have any further question, please feel free contact us atenquiry@stc.groupor visit our website:https://www.stc.group/en/contact

Biocompatibility Testing Services for Medical Devices

V-Trust Inspection Service Co., Ltd

V-Trust is now providing you a bridge to over 4,000 labs with the CNAS accreditation. These labs&#39; reports are generally accepted in most of countries all over the world, including EU, USA, Canada, UK, etc. Many testing equipments are standing idle because they are serving for internal customers and they have not approached to the overseas markets. 	 The testing price of such labs is 30% lower compared with the price of other labs. 	 There are 4,342 labs with CNAS accreditation in China (statistical data from CNAS till Nov. 2011). 	 All of the labs are also accredited the members of ILAC.  

Laboratory Testing

Eurofins MTS Consumer Product Testing Hong Kong Limited  

Competences of MTS: 	 US and EU Recognized Toxicologist &ndash; Dr. Jongsei Park 	 US CPSC &ndash; Recommended Toxicologist 	 ERT &ndash; European Registered Toxicologist 	 EU Responsible Person &ndash; Obelis&rsquo; Safety Assessor  &nbsp;
Our services cover: 	 Full microbiological testing capability (USP/BP) 	 Label &amp; Ingredient Review 	 REACH Chemical testing per Annex XVII 	 EN71-1, 2, 3 &amp; 9 for children cosmetic 	 Screening service for REACH SVHC 	 Heavy metal in cosmetic 	 Cosmetic Product (Safety) Review  

Health & Beauty Product Testing

Microbiological testing for assessing the microbiological characteristics of finished devices, manufacturing process and manufacturing environment can help eliminate or minimize the risk of microbial contamination, hence the risk of infection to patients, users or third parties.  STC offers a comprehensive scope of microbiological test to assist medical device manufacturers in meeting the microbiological and sterilization safety requirements for regulatory approval.  Testing Capabilities Bioburden TestEndotoxin DeterminationSterility TestPackage integrity TestShelf Life / Life-Cycle ValidationMicrobial IdentificationCompendial TestingAntimicrobial ChallengeCleaning ValidationCustomized Microbial AssessmentsMicrobiological Limits TestWater Sampling &amp; Testing for Sterility &amp; Microbiological SafetyIf you have any further question, please feel free contact us or visit our website:https://www.stc.group/en/contact 

Microbiological Testing for Medical Devices

General Foodstuffs Testing	Aerobic colony count / Anaerobic plate count	Coliform / Fecal Coliform	Enterobacteriaceae	Molds &amp; Yeasts Count	Mesophilic / Thermophilic Spore CountMooncake, Pastry &amp; Bread Testing(GB 19855, GB 7099)	Aerobic Plate Count(GB 4789.2)	Coliforms(GB 4789.3)	Moulds Count(GB 4789.15)	Salmonella(GB 4789.4)	Shigella(GB 4789.5)	Staphylococcus aureus(GB 4789.10)Biotoxins- Seafood &amp; Shellfish Testing	Amnesic shellfish poison(ASP)	Diarrhetic shellfish poison(DSP)	Neurotoxic shellfish poison(NSP)	Paralytic shellfish poison(PSP)Antibacterial Assessment	Textile Materials(AATCC 100, AATCC 147, JIS L 1902)	Plastic(JIS Z 2801, ISO 22196)	Metal &amp; Ceramic Products(JIS Z 2801)	Assessment of Antimicrobial Activity(ASTM E2315)Antifungal Assessment	Textile materials and Fabrics(AATCC 30, ASTM D4576)	Plastic(ASTM G21)	Antimicrobial Effectiveness testing for Disinfectant or Sterilization ProductCosmetics Testing	Standard Plate Count, Fecal coliforms, Pseudomonas aeruginosa, Staphylococcus aureus(GB 7916)	Aerobic Bacterial Count, Thermotolerant coliform bacteria, Pseudomonas aeruginosa, Staphylococcus aureus(Molds &amp; Yeast Count Safety and Technical Standards for Cosmetics 2015)Disposable Products Testing	Sanitary Products(GB 15979)	Wooden Chopsticks(GB 19790.1)Toiletry Testing	Bathroom Tissue(Including base paper)(GB 20810)	Toilet Paper(QB 2500)Antibiotics-Resistant Bacteria	Extended-spectrum beta-lactamase producing bacteria (ESBL)	Methicillin-resistant Staphylococcus aureus (MRSA)Antibiotics-Sensitivity Testing (AST)	Aminoglycosides	Carbapenems	Cephalosporins	Fluoroquinolones	Glycopeptides	Lincosamides	Macrolides	Penicillins	Sulfonamides	TetracyclinesHygiene &amp; Sanitation	Swab Sampling &amp; Testing	Hygiene Audit	On-site Basic Food Hygiene TrainingIf you have any further question, please feel free contact us atenquiry@stc.groupor visit our website:https://www.stc.group/en/contact

Microbiology & Sanitation Testing

STC&#39;s expertise in pharmaceutical testing can help ensure that products meet safety and quality requirements through evidence-based assay and identification methods along with toxicity assessments and stability testing in accordance to pharmacopeia&nbsp;(an official publication containing a list of medicinal drugs with their effects and directions for use).

STC&#39;s pharmaceutical testing service also extends to cover Chinese and herbal medicine testing. As an accredited laboratory, STC&rsquo;s testing capabilities include the full list of mandatory testing requirements for all proprietary Chinese medicine (pCm) stipulated by the&nbsp;Department of Health in Hong Kong&nbsp;to ensure safety and quality.

  Proprietary Chinese Medicine (pCm) Safety Testing   	 Pesticides Residues&nbsp;(e.g. Aldrin, Chlordane, DDT, Endrin, etc.) 	 Microbial Limit&nbsp;(e.g. total bacteria count, molds &amp; yeasts count, etc.) 	 Issuance of Summary Report on Product Safety Document    Product Quality &amp; Safety Testing   	 Assay and Identification of Active Ingredients in PCM 	 Microbial Limit&nbsp;(e.g. total bacteria count, molds &amp; yeasts count, etc.) 	 General Physical Testing&nbsp;(e.g. determination of water, disintegration test, filling, packing variation, size of granules, etc)    Toxicity &amp; Biocompatibility Assessment   	 Systemic Toxicity&nbsp;(Acute, Sub-Chronic, and Chronic) 	 Local Toxicity&nbsp;(Irritation and Skin Sensitization) 	 In-vitro Cytotoxicity 	 Genotoxicity, Carcinogenicity and Reproductive Toxicity    Pharmaceutical Adulterants Screening   	 Men&rsquo;s Drugs 	 Slimming Drugs 	 Steroids 	 Sex Hormones 	 Analgesic Drugs 	 Drugs for lowering blood pressure, cholesterol or sugar levels    Stability Testing   	 Conducted in General, Real-Time and Accelerated manner    Method Validation (Assay / Identification)   	 Applicable to known or characteristic constituents in finished products    Pharmacopeia Monograph   	 Compliance Testing stipulated in British, US, Japan, EU, and China Pharmacopeia monograph  If you have any further question, please feel free contact us at&nbsp; enquiry@stc.group &nbsp;or visit our website:&nbsp; https://www.stc.group/en/contact 

Pharmaceutical Testing

At STC, our GMO &amp; DNA food testing capabilities are recognized under HOKALS accreditation to provide accurate and reliable testing services. Through extensive extraction and amplification of genetic materials via polymerase chain reaction (PCR) and DNA sequencing, we have the ability to unmask and identify any biological organism by analyzing their unique genetic codes.  Along with traditional food product safety testing, STC’s comprehensive testing capabilities also include molecular-based methods on microorganisms, traditional testing protocols for microbiological and antimicrobial effectiveness testing.  GMO Testing &amp;DNA Food Testing CaMV35S, NOS, etc. in GM FoodsCTP, Bt-11, etc. in soy, corn and their derived foodstuffDetection of GM Elements in rice, tomatoes, papaya, etc.Food Composition &amp;Product Safety Testing Allergic Substances(e.g. gluten, wheat, crustaceans, fish, peanut, soybean, nuts, etc.)Animal Ingredient Adulteration(e.g. porcine, bovine, fish, donkey, equine, etc.)Species Identification(e.g. animal and plant species)Valuable Medicine Authentication Species Identification in Products(e.g. Birds’ nest, Donkey-hide gelatin, Velvet Antler, Dried bulbous fritillaria cirrhosis, Cordyceps Sinensis, etc.) Bacterial &amp; Viral Testing Influenza A (Flu A) virus in food and the environmentFood-borne Pathogen and Viruses(e.g. Campylobacter, Norovirus, Hepatitis A, Rotavirus, etc.)If you have any further question, please feel free contact us or visit our website: https://www.stc.group/en/contact 

DNA Food Testing and GMO Testing

STC’s food science experts have been assisting many government departments, food manufacturers, processors, hotels, restaurants, catering service centers and fast food chains meet regulatory market requirements and address consumer safety concerns.  Food Nutrition Analysis and Nutrition Labeling Hong Kong 1+7 Nutrition Label(CFS)China Nutrition Label(GB 28050)Australia Nutrition Label(FSANZ)USA Nutrition Label(FDA)Canada Nutrition Label(Health Canada)EU Nutrition Label Regulation(EU No. 1169/2011) Food Product Safety Testing Heavy Metals Adulterants(HK Food Regulation: Sb, As, Cd, Cr, Pb, Hg, Sn)Pesticide Residues(e.g. fipronil, organochlorine, organophosphorus, etc.)Harmful Chemicals in Food(e.g. melamine, phthalates, aflatoxins, biotoxins, etc.)Animal Drug ResiduesFood Additives Artificial Coloring MatterArtificial SweetenerPreservativesProhibited Additives(e.g. sudan red, formaldehydes, boric acid, salicylic acid, etc.)Shelf Life Study STC provides real time and accelerated shelf life study to assist food manufacturers in evaluating and verifying product ‘use by’ or ’best before’ date(s) for compliance to statutory or commercial requirements.Physical, chemical and microbiological processes are critical factors altering the quality and safety of food.Parameters below could help monitor the composition of food products: Food Quality Testing(e.g. moisture content, water activity, fat rancidity, etc.)Chemical Properties(e.g. peroxide value, pH, acidity levels, etc.)Pharmaceutical Adulterants ScreeningMicrobiological Analysis (e.g. food-borne micro-organisms, total viable count, Enterobacteriaceae, etc.)If you have any further question, please feel free contact us or visit our website: https://www.stc.group/en/contact

Food Quality Testing & Food Nutrition Analysis

We offer professional gift and premium testing services for customers. We have regular services and priority services for your selection. We use high-quality equipment to test and offer precision results.    Regular services: 8-10 working days for microbiological and chemical testing.    Priority services: 3 working days.

Gift and Premium Testing

 Founded in 1963, Hong Kong Standards and Testing Centre (STC) provides a wide range of professional testing services for proprietary Chinese medicine, Chinese Materia Medica, pharmaceutical products, food, microbiological quality and cosmetics, environmental testing as well as "STC tested" Mark Certification. 

 EN71-3 Heavy Metals Analysis using state-of-the-art instrument is available at Hong Kong Standards &amp; Testing Centre.

Heavy Metals Testing

The chemical, food and pharmaceutical product testing service is carried out by the renowned Hong Kong Standards and Testing Centre (STC). It providesa wide variety of analytical services, certification and technical services to the chemical, environmental, food, health supplement, pharmaceuticals, proprietary Chinese medicine, metallurgical and plastics industries.	Chemical testing.	Environmental analysis.	Food testing.	Pharmaceutical product testing.	Chinese medicine testing.

Chemical, Food and Pharmaceutical Product Testing

 	 Competences of MTS: US and EU Recognized Toxicologist Dr. Jongsei Park US CPSC Recommended Toxicologist ERT European Registered Toxicologist EU Responsible Person Obelis Safety Assessor&nbsp; 	 Our services cover: Full microbiological testing capability (USP/BP) Label &amp; Ingredient Review REACH Chemical testing per Annex XVII EN71 1, 2, 3 &amp; 9 for children cosmetic Screening service for REACH SVHC Heavy metal in cosmetic Cosmetic Product (Safety) Review  

Health & Beauty Products Testing

Hong Kong Council for Testing and Certification

Why should you use Hong Kong’s testing and certification services? High Professional IntegrityGood Intellectual Property ProtectionHigh Technical CompetenceQuick Response to Market NeedsRobust Accreditation System Being Highly Regarded InternationallyA Free Port with Excellent Logistics SupportYou can find more information about Hong Kong’s testing and certification sector from the website of the Hong Kong Council for Testing and Certification (HKCTC): www.hkctc.gov.hk To find quality reports / certificates? Look for the HKAS Accreditation Symbol!All endorsed test reports / certificates issued by Hong Kong Accreditation Service (HKAS) accredited organisations bear the HKAS accreditation symbol with the registration number of the accredited organisations. Wide Recognition of HKAS-Accredited OrganisationsHKAS' accreditation is recognised in over 100 economies, including all major trading partners of Hong Kong such as the United States, European Union, Mainland China and Japan. Accreditation helps users to identify reliable conformity assessment service providers. You can find service providers accredited by HKAS and their scope of accreditation from the website of HKAS:www.hkas.gov.hk 

Testing Services for Chinese Medicines

CMA Testing & Certification Laboratories Limited

We are an accredited laboratory to provide all required tests including safety test, stability test &amp; method validation for proprietary Chinese medicines registration according to the requirement of the Department of Health of Hong Kong. Besides, we have been accredited by the Hong Kong Laboratory Accreditation Scheme (HOKLAS) to perform microscopic identification test in Rhizoma Gastrodiae, total ash and water content tests in Chinese Materia Medica. The extension of scope of accreditation for copper test in Proprietary Chinese Medicines and Chinese Materia Medica has also been approved by HKAS Executive. Proprietary Chinese medicines safety test Heavy metals and toxic elementsMicrobial limitPesticides residuesQuality test and stability testinProprietary Chinese medicines Assay and identification testAccelerated stability testReal time stability testDrug adulterants screening Pharmaceutical adulteration testQuality test in Chinese Materia Medica Fingerprinting, chromatographic and microscopic identification in rhizoma gastrodiaeTotal ash and water content, heavy metals, acid-insoluble ash, extractives, Mycotoxins tests in Chinese Materia Medica By keeping investment on sophisticated equipment and combined with a dynamic quality team, CMA Testing provides pharmaceutical products testing including both proprietary Chinese medicine and western drug so as to ensure the quality and safety of pharmaceutical products. We are glad to support you by our consultation service, technical solutions and training whenever you need. 

Proprietary Chinese Medicine Testing

Bureau Veritas HK Ltd

  Composition and other analytical tests  Colourfastness tests  Dimensional stability (shrinkage)/ Related tests  Construction tests  Flammability tests  Feather and down tests  Strength tests  Other physical tests  Specialized tests  Chemical tests  Eco-textile tests  Woolmark and woolmark blend tests  

Expanded Conditioning Room for Physical Test

QIMA Limited

QIMA offers a full range of laboratory testing services for electrical and electronic consumer products to ensure compliance with international safety, quality, and performance standards. These services include: Electrical Safety Testing – Verifying compliance with IEC, EN, and UL standards for electrical safety, insulation resistance, and leakage current.EMC (Electromagnetic Compatibility) Testing – Ensuring products do not interfere with or are not affected by other electronic devices.Performance and Durability Testing – Assessing reliability, lifespan, and efficiency under real-world conditions.Chemical and Environmental Testing – Checking for hazardous substances like RoHS, REACH, and California Prop 65 compliance.Energy Efficiency Testing – Evaluating power consumption and compliance with energy efficiency regulations (e.g., Energy Star, ERP).Battery and Charger Testing – Safety, performance, and compliance checks for lithium-ion and other battery types.Wireless and Connectivity Testing – Ensuring compliance with RF and wireless standards for Bluetooth, Wi-Fi, and other technologies.QIMA’s accredited labs conduct these tests to help manufacturers, retailers, and brands ensure their products meet regulatory requirements and consumer expectations before reaching the market. 

Lab Testing for Electrical and Electronic Consumer Products

AKESO BIOPHARMA INC

   Therapeutic antibody generation service.   RIMMs like procedure.   Provide functional cellular assay screening.   Stable cell line for FACS.   Reliably produce high affinity antibodies quickly.   Generate hard-to-obtain antibodies.   Combine activating immune system and breaking immune tolerance using different sets of special reagents.   Use combined indirect ELISA and competitive ELISA for functional antibody screening.   Antibody/ antigen interaction.   Epitope binning/ mapping.   Antibody internalization screening.  

Therapeutic Antibody Generation and Assay Screening

Fugro Technical Services Ltd - MateriaLab Division

Micro-materials analysis:
   The micro-materials section (MMS) has worked on a vast range of materials and products, such as construction materials, building products, consumer products, industrial components, mechanical parts and plant facilities.   The MMS team comprises a diverse workforce of geologists, material engineers and chemists whose objective is to provide impartial and professional analysis, advice and solutions in relation to the design, selection, characterization or failure causes of materials to customers.  Environmental &amp; microbiological testing:
   The environmental and microbiological laboratory provides a full service of environmental sampling and analysis, as well as performance evaluation of environmental facilities.   The laboratory is equipped with state-of-the-art equipment to deliver reliable and accurate results and has the diversity and capability to meet customers' testing requirement.  



Micro-Material Analysis & Environmental & Microbiological Testing

Bancroft Architects + Engineers

Project Description
Bancroft provided pre-planning and full architectural and engineering services to re-develop multiple standard operational protocols (SOP&rsquo;s) for both the researchers and physical plant for the new BSL3 suites at the Zablocki VA in Milwaukee, WI.

The intended use of this specialized lab is to further the research and testing of select agents.

Bancroft&rsquo;s seasoned team of laboratory planners understood that the planning for the approvals and certification from both the CDC and the FBI needed to start at the onset of the project. Our lab planning experts led the research team along with the security and building maintenance team through the development of the design of these laboratories to clearly define the anticipated use of the space.

The new program includes existing and new class III biosafety cabinets and other recommissioned equipment relocated from the existing laboratory. Additional equipment includes incubators, medical gases, autoclave, decontamination system and other related benchtop equipment.&nbsp; The design and program require a dedicated HVAC system, gowning and de-gowning area, monitoring and controls, expansion of the security systems and personnel training.

Project Details 	 Client:&nbsp;Clement J. Zablocki VAMC 	 Location:&nbsp;Milwaukee, WI 	 Size:&nbsp;2,500 sf  

BSL-3 Laboratory Upgrade

Guangzhou GRG Metrology And Test Technology Co., Ltd.

 The company is providing various chemical analysis and tests for raw materials and finished products. We are offering toy testing services too. Items we test include soluble heavy metals (Pb, Cd, Cr, As, Ba, Hg, Se, Sb), total Pb, phthalic acid salts and other organic compounds. 
 
  Testing standards: GB 6675-2003, EN 71-3 &amp; 9-11, ASTM F963, such as ISO 8124-3. 
  Battery directive testing items: lead (Pb), mercury (Hg), cadmium (Cd); testing standards: EPA 3050B, EPA, 3052, EPA 6010B, etc. 
  Packaging directive testing items: lead (Pb), mercury (Hg), cadmium (Cd), hexavalent chromium (Cr6 +); testing standards: EPA 3050B, EPA, 3052, EPA 6010B, etc. 
  Products testing: car air, total volatile organic compounds automotive components, ELV directive testing standards: EPA 3050B, EPA, 3052, EPA 6010B, HJ / T 400-2007, etc. 
  Material analysis and metal component analysis (component analysis of various metal grades). 
  Non-metallic (plastic, rubber, etc) component analysis (IR, DSC and TG). 
  Halogen-free testing; testing items: (F-, Cl-, Br-, I -, etc.); testing standards: BS EN 14582:2007, etc. 
  Test for the toxic and harmful substances of electronic products; testing items include polychlorinated biphenyls (PCB), polychlorinated Chennai (PCN), organic compounds (Organic Tin Compounds) polycyclic aromatic hydrocarbons (PAHs), phthalates (Phthalate), asbestos, etc. Testing standards: EPA 3540C, EPA 8270D, etc. 
  &nbsp; 
  Test for textile, clothing, leather, cloth; testing items include formaldehyde, azo dyes, organic tin compounds, perfluorooctane sulfonate (PFOS); testing standards: GB / T 17592.1-1998, GB / T 20385-2006, GB 18401-2001, etc. 
 

Chemical Analysis Test

Castco Testing Centre Ltd

This Chinese medicine testing service includes tests of heavy metals, toxic elements, organochlorine pesticide residues, etc. The advanced technology used guarantee added accuracy. This medicine testing service is reliable and effective.
 
  Excellent service. 
  With detailed reports. 
 

My Sourcing