l This instrument has been designed, manufactured according to IEC 61010:2001. Designed to following safety standards:
IEC 61010-1(CAT.III 600V Pollution degree 2)
IEC 61557-1:1997
IEC 61557-2:1997
l With auto-discharge function
l USB interface data transmission
l White backlight function to facilitate working at dimly illuminated location
l Bar graph to display measured result
l With special-purpose power source adapter
l High-voltage prompt
l The actual output voltage value is displayed on the second secondary display. At the same time, the measured value of insulation resistance is displayed on primary display.
l Temperature , 24-hour time and leakage current display
l With Auto-power off function
The meter will go into automatic power-off mode if you have not changed the rotary switch position
or pressed a button for a set period. Set range 0~60 min. Set zero to cancel auto power-off function.To turn the meter on after automatic power-off of the meter, please set the function range switch to “OFF” position, and then set the function range switch to any position other than “OFF”.
l Independent of internal memory can store up to 760 (group) measurements. (manual records 260 (group), the operating records 500 (group))
l With Timer measurement function
Automatically performs a measurement at the set time.
l With Polarization index measurement
The polarization index can be measured by the automatic measurement function of the ratio of resistance in arbitrary two point time.
l With Dielectric Absorption Ratio measurement
The Dielectric Absorption Ratio can be measured by the automatic measurement function of the ratio of resistance in arbitrary two point time.
l With Step Voltage measurement
Raising the voltage at a certain period and measuring the insulation resistance.
Two kinds of voltage rise model:
2500V range: 500V → 1000V → 1500V → 2000V → 2500V
5000V range: 1000V → 2000V → 3000V → 4000V → 5000V
l Built-in real-time clock can provide accurate time for recording and measuring.
l Panel calibration technology, no need to open the chassis can be calibrated.